Search NASA⌕ Search

SEARCH · Search NASA

Results for “DECOUPLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

revengc: An R package to Reverse Engineer Summarized Data

Decoupled (e.g. separate averages) and censored (e.g. > 100 species) variables are continually reported by many well-established organizations, such as the World Health Organization (WHO), Centers for Disease Control and Prevention (CDC), and World Bank. The challenge therefore is to infer what the original data could have been given summarized information. We present an R package that reverse engineers censored and/or decoupled data with two main functions. The cnbinom.pars() function estimates the average and dispersion parameter of a censored univariate frequency table. The rec() function reverse engineers summarized data into an uncensored bivariate table of probabilities.

97 MATHEMATICS AND COMPUTING↗

Measurements and Prediction of Ash Deposition in a Cyclone-Fired Boiler Operating under Variable Load Conditions

Measurements of ash deposition rates were made between the secondary superheater and reheater sections of a 450 MW cyclone-fired lignite boiler as the operational load varied from 33 to 100%. Significant reductions in deposition rates with a decrease in operational load were observed. To uncover the causative mechanisms behind these observations, operational data from the power plant were used to carry out computational fluid dynamic (CFD) simulations of the boiler. After ascertaining that the gas temperatures and velocities at various sections within the boiler were being represented adequately, decoupled simulations of the ash deposition process on the deposit probe were carried out using a finely resolved boundary layer mesh. Fly ash particle size distribution (PSD) and its concentration for the decoupled calculations were determined from stand-alone cyclone barrel simulations. The ash partitioning (mass %) between the fly ash and slag was found to be ~50:50, which was in line with previous field observations, and it did not vary significantly across different cyclone loads. The predicted PSD of the deposit ash was concentrated in the size range 10–30 microns, which was in agreement with cross-sectional images of the deposit obtained from the measurements. At lower loads, sharp variations in the deposition rates were predicted in the gas temperature range 950–1150 K. The particle kinetic energy—particle viscosity-based capture methodology utilized in this study in conjunction with appropriate ash compositions, ash viscosity models and gas temperature estimates can help estimate slagging propensities at different loads reasonably well in these systems.

Krishnamoorthy, Gautham (ORCID:0000000255205092)↗

Near-Complete Sampling of Forest Structure from High-Density Drone Lidar Demonstrated by Ray Tracing

Drone lidar has the potential to provide detailed measurements of vertical forest structure throughout large areas, but a systematic evaluation of unsampled forest structure in comparison to independent reference data has not been performed. Here, we used ray tracing on a high-resolution voxel grid to quantify sampling variation in a temperate mountain forest in the southwest Czech Republic. We decoupled the impact of pulse density and scan-angle range on the likelihood of generating a return using spatially and temporally coincident TLS data. We show three ways that a return can fail to be generated in the presence of vegetation: first, voxels could be searched without producing a return, even when vegetation is present; second, voxels could be shadowed (occluded) by other material in the beam path, preventing a pulse from searching a given voxel; and third, some voxels were unsearched because no pulse was fired in that direction. We found that all three types existed, and that the proportion of each of them varied with pulse density and scan-angle range throughout the canopy height profile. Across the entire data set, 98.1% of voxels known to contain vegetation from a combination of coincident drone lidar and TLS data were searched by high-density drone lidar, and 81.8% of voxels that were occupied by vegetation generated at least one return. By decoupling the impacts of pulse density and scan angle range, we found that sampling completeness was more sensitive to pulse density than to scan-angle range. There are important differences in the causes of sampling variation that change with pulse density, scan-angle range, and canopy height. Our findings demonstrate the value of ray tracing to quantifying sampling completeness in drone lidar.

47 OTHER INSTRUMENTATION↗

Measurements of water surface snow lines in classical protoplanetary disks

We present deep Herschel-PACS spectroscopy of far-infrared water lines from a sample of four protoplanetary disks around solar-mass stars, selected to have strong water emission at mid-infrared wavelengths. By combining the new Herschel spectra with archival Spitzer-IRS spectroscopy, we retrieve a parameterized radial surface water vapor distribution from 0.1 to 100 au using two-dimensional dust and line radiative transfer modeling. The surface water distribution is modeled with a step model composed of a constant inner and outer relative water abundance and a critical radius at which the surface water abundance is allowed to change. We find that the four disks have critical radii of ∼3–11 au, at which the surface water abundance decreases by at least 5 orders of magnitude. The measured values for the critical radius are consistently smaller than the location of the surface snow line, as predicted by the observed spectral energy distribution. This suggests that the sharp drop-off of the surface water abundance is not solely due to the local gas-solid balance, but may also be driven by the deactivation of gas-phase chemical pathways to water below 300 K. Assuming a canonical gas-to-dust ratio of 100, as well as coupled gas and dust temperatures T{sub gas} = T{sub dust}, the best-fit inner water abundances become implausibly high (0.01–1.0 H{sub 2}{sup −1}). Conversely, a model in which the gas and dust temperatures are decoupled leads to canonical inner-disk water abundances of ∼10{sup −4} H{sub 2}{sup −1}, while retaining gas-to-dust ratios of 100. That is, the evidence for gas–dust decoupling in disk surfaces is stronger than for enhanced gas-to-dust ratios.

79 ASTRONOMY AND ASTROPHYSICS↗

EXPERIMENTAL INVESTIGATION OF IRRADIATION-DRIVEN HYDROGEN ISOTOPE FRACTIONATION IN ANALOGS OF PROTOPLANETARY HYDROUS SILICATE DUST

The origin of hydrogen in chondritic components is poorly understood. Their isotopic composition is heavier than the solar nebula gas. In addition, in most meteorites, hydrous silicates are found to be lighter than the coexisting organic matter. Ionizing irradiation recently emerged as an efficient hydrogen fractionating process in organics, but its effect on H-bearing silicates remains essentially unknown. We report the evolution of the D/H of hydrous silicates experimentally irradiated by electrons. Thin films of amorphous silica, amorphous “serpentine,” and pellets of crystalline muscovite were irradiated at 4 and 30 keV. For all samples, irradiation leads to a large hydrogen loss correlated with a moderate deuterium enrichment of the solid residue. The entire data set can be described by a Rayleigh distillation. The calculated fractionation factor is consistent with a kinetically controlled fractionation during the loss of hydrogen. Furthermore, for a given ionizing condition, the deuteration of the silicate residues is much lower than the deuteration measured on irradiated organic macromolecules. These results provide firm evidence of the limitations of ionizing irradiation as a driving mechanism for D-enrichment of silicate materials. The isotopic composition of the silicate dust cannot rise from a protosolar to a chondritic signature during solar irradiations. More importantly, these results imply that irradiation of the disk naturally induces a strong decoupling of the isotopic signatures of coexisting organics and silicates. This decoupling is consistent with the systematic difference observed between the heavy organic matter and the lighter water typically associated with minerals in the matrix of most carbonaceous chondrites.

79 ASTRONOMY AND ASTROPHYSICS↗

Circumstellar Dust Distribution in Systems with Two Planets in Resonance

We investigate via numerical modeling the effects of two planets locked in resonance, and migrating outward, on the dust distribution of the natal circumstellar disk. We aim to test whether the dust distribution exhibits peculiar features arising from the interplay among the gravitational perturbations of the planets in resonance, the evolution of the gas, and its influence on the dust grain dynamics. We focus on the 3:2 and 2:1 resonance, where the trapping may be caused by the convergent migration of a Jupiter- and Saturn-mass planet, preceding the common gap formation and ensuing outward (or inward) migration. Models show that a common gap also forms in the dust component similarly to what a single, more massive planet would generate and that outward migration leads to a progressive widening of the dust gap and to a decoupling from the gas gap. As the system evolves, a significantly wider gap is observed in the dust distribution, which ceases to overlap with the gas gap in the inner disk regions. At the outer edge of the gas gap, outward migration of the planets produces an overdensity of dust particles, which evolve differently in the 3:2 and 2:1 resonances. For the 3:2 resonance, the dust trap at the gap’s outer edge is partly efficient, and a significant fraction of the grains filters through the gap. For the 2:1 resonance, the trap is more efficient, and very few grains cross the gap, while the vast majority accumulate at the outer edge of the gap.

79 ASTRONOMY AND ASTROPHYSICS↗

Protoplanetary Disks as (Possibly) Viscous Disks

Protoplanetary disks are believed to evolve on megayear timescales in a diffusive (viscous) manner as a result of angular momentum transport driven by internal stresses. Here we use a sample of 26 protoplanetary disks resolved by ALMA with measured (dust-based) masses and stellar accretion rates to derive the dimensionless α-viscosity values for individual objects, with the goal of constraining the angular momentum transport mechanism. We find that the inferred values of α do not cluster around a single value, but instead have a broad distribution extending from 10{sup −4} to 0.04. Moreover, they correlate with neither the global disk parameters (mass, size, surface density) nor the stellar characteristics (mass, luminosity, radius). However, we do find a strong linear correlation between α and the central mass accretion rate M-dot . This correlation is unlikely to result from the direct physical effect of M-dot on internal stress on global scales. Instead, we suggest that it is caused by the decoupling of stellar M-dot from the global disk characteristics in one of the following ways: (1) The behavior (and range) of α is controlled by a yet-unidentified parameter (e.g., ionization fraction, magnetic field strength, or geometry), ultimately driving the variation of M-dot . (2) The central M-dot is decoupled from the global accretion rate as a result of an instability, or mass accumulation (or loss in a wind or planetary accretion) in the inner disk. (3) Perhaps the most intriguing possibility is that angular momentum in protoplanetary disks is transported nonviscously, e.g., via magnetohydrodynamic winds or spiral density waves.

79 ASTRONOMY AND ASTROPHYSICS↗

On the Injection Scale of the Turbulence in the Partially Ionized Very Local Interstellar Medium

The cascade of magnetohydrodynamic (MHD) turbulence is subject to ion–neutral collisional damping and neutral viscous damping in the partially ionized interstellar medium. By examining the damping effects in the warm and partially ionized local interstellar medium, we find that the interstellar turbulence is damped by neutral viscosity at ~261 au and cannot account for the turbulent magnetic fluctuations detected by Voyager 1 and 2. The MHD turbulence measured by Voyager in the very local interstellar medium (VLISM) should be locally injected in the regime where ions are decoupled from neutrals for its cascade to survive the damping effects. With the imposed ion–neutral decoupling condition and the strong turbulence condition for the observed Kolmogorov magnetic energy spectrum, we find that the turbulence in the VLISM is sub-Alfvénic, and its largest possible injection scale is ~194 au.

79 ASTRONOMY AND ASTROPHYSICS↗

Holography vs. Scale Separation

In this work, we point out a contradiction between holography and scale-separated AdS (i.e. parametrically large mass gap) in string theory, making the standard assumption that the holographic CFT describes the IR degrees of freedom on a brane that decouple from gravity. We show that the CFT can only decouple from gravity if the scalar potential in the dual AdS satisfies a certain criterion. Namely, there must exist a scalar field trajectory that follows the gradient of the scalar potential to the asymptotic region of the scalar field space in which limit $\partial_ϕ\ln(V)\partial_ϕ\ln(Λ_s)\leq2/(d-2)$, where $Λ_s$ is the quantum gravity cut-off. This condition, which generically implies lack of scale-separation, is satisfied in the standard examples of AdS/CFT. However, proposed attempts at achieving scale separation, such as DGKT, employ scalar potentials that violate this condition. We therefore conclude that the CFT duals of DGKT vacua cannot exist in string theory. Barring fine-tuning, our conclusions apply to other Ricci-flat flux compactifications including the KKLT scenario which relies on scale separation to obtain a metastable de Sitter uplift.

FOS: Physical sciences↗

On the differences in the vertical distribution of modeled aerosol optical depth over the southeastern Atlantic

Abstract. The southeastern Atlantic is home to an expansive smoke aerosol plume overlying a large cloud deck for approximately a third of the year. The aerosol plume is mainly attributed to the extensive biomass burning activities that occur in southern Africa. Current Earth system models (ESMs) reveal significant differences in their estimates of regional aerosol radiative effects over this region. Such large differences partially stem from uncertainties in the vertical distribution of aerosols in the troposphere. These uncertainties translate into different aerosol optical depths (AODs) in the planetary boundary layer (PBL) and the free troposphere (FT). This study examines differences of AOD fraction in the FT and AOD differences among ESMs (WRF-CAM5, WRF-FINN, GEOS-Chem, EAM-E3SM, ALADIN, GEOS-FP, and MERRA-2) and aircraft-based measurements from the NASA ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) field campaign. Models frequently define the PBL as the well-mixed surface-based layer, but this definition misses the upper parts of decoupled PBLs, in which most low-level clouds occur. To account for the presence of decoupled boundary layers in the models, the height of maximum vertical gradient of specific humidity profiles from each model is used to define PBL heights. Results indicate that the monthly mean contribution of AOD in the FT to the total-column AOD ranges from 44 % to 74 % in September 2016 and from 54 % to 71 % in August 2017 within the region bounded by 25∘ S–0∘ N–S and 15∘ W–15∘ E (excluding land) among the ESMs. ALADIN and GEOS-Chem show similar aerosol plume patterns to a derived above-cloud aerosol product from the Moderate Resolution Imaging Spectroradiometer (MODIS) during September 2016, but none of the models show a similar above-cloud plume pattern to MODIS in August 2017. Using the second-generation High Spectral Resolution Lidar (HSRL-2) to derive an aircraft-based constraint on the AOD and the fractional AOD, we found that WRF-CAM5 produces 40 % less AOD than those from the HSRL-2 measurements, but it performs well at separating AOD fraction between the FT and the PBL. AOD fractions in the FT for GEOS-Chem and EAM-E3SM are, respectively, 10 % and 15 % lower than the AOD fractions from the HSRL-2. Their similar mean AODs reflect a cancellation of high and low AOD biases. Compared with aircraft-based observations, GEOS-FP, MERRA-2, and ALADIN produce 24 %–36 % less AOD and tend to misplace more aerosols in the PBL. The models generally underestimate AODs for measured AODs that are above 0.8, indicating their limitations at reproducing high AODs. The differences in the absolute AOD, FT AOD, and the vertical apportioning of AOD in different models highlight the need to continue improving the accuracy of modeled AOD distributions. These differences affect the sign and magnitude of the net aerosol radiative forcing, especially when aerosols are in contact with clouds.

54 ENVIRONMENTAL SCIENCES↗

Higher order harmonic detection for exploring nonlinear interactions

Nonlinear dynamics underpin a vast array of physical phenomena ranging from interfacial motion to jamming transitions. In many cases, decoupling the contributions of competing or co-existing mechanisms to the system response can be achieved through investigation of higher order harmonics. Here, a method using band excitation scanning probe microscopy to investigate higher order harmonics of the electromechanical response, with nanometer scale spatial resolution is presented. The utility of the technique is demonstrated by probing the first three harmonics of strain for a well-known system, a model Pb(Zr1-xTix)O3 ferroelectric capacitor. It is shown that the second order harmonic response is correlated with the first harmonic response, whereas the third harmonic is not. Additionally, nanoscale measurements of the second harmonic response with field reveal significant deviations from Rayleigh-type models in the form of a much more complicated field dependence than is observed in the spatially averaged data. These results illustrate the versatility of combining proximal probe techniques with nth harmonic detection methods in exploring and decoupling nonlinear dynamics in a wide variety of nanoscale materials.

ferroelectric↗

SISGR: Atom chip microscopy: A novel probe for strongly correlated materials

Microscopy techniques co-opted from nonlinear optics and high energy physics have complemented solid-state probes in elucidating the order manifest in condensed matter materials. Up until now, however, no attempts have been made to use modern techniques of ultracold atomic physics to directly explore properties of strongly correlated or topologically protected materials. Our current program is focused on introducing a novel magnetic field microscopy technique into the toolbox of imaging probes. Our prior DOE ESPM program funded the development of a novel instrument using a dilute gas Bose-Einstein condensate (BEC) as a scanning probe capable of measuring tiny magnetic (and electric) DC and AC fields above materials. We successfully built the world's first “scanning cryogenic atom chip microscope”, and we now are in the process of characterizing its performance before using the instrument to take the first wide-area images of transport flow within unconventional superconductors, pnictides and oxide interfaces (LAO/STO), topological insulators, and colossal magnetoresistive manganites. We will do so at temperatures outside the capability of scanning SQUIDs, with ~10x better resolution and without 1/f-noise. A notable goal will be to measure the surface-to-bulk conductivity ratio in topological insulators in a relatively model-independent fashion. We have completed the construction of this magnetic microscope. The instrument uses atom chips—substrates supporting micron-sized current-carrying wires that create magnetic microtraps near surfaces for ultracold thermal gases and BECs—to enable single-shot and raster-scanned large-field-of-view detection of magnetic fields. The fields emanating from electronic transport may be detected at the 10 -7 flux quantum (Φ0) level and below; that is, few to sub-micron resolution of sub-nanotesla fields over single-shot, millimeter-long detection lengths. By harnessing the extreme sensitivity of atomic clocks and BECs to external perturbations, we are now in a position to use atom chips for imaging transport in new regimes. Scanning quantum gas atom chip microscopy introduces three very important features to the toolbox of high-resolution scanning microscopy of strongly correlated or topological materials: simultaneous detection of magnetic and electric fields (down to the sub-single electron charge level; no invasive large magnetic fields or gradients; simultaneous micro- and macroscopic spatial resolution; DC to MHz detection bandwidth; freedom from 1/ƒ flicker noise at low frequencies; and, perhaps most importantly, the complete decoupling of probe and sample temperatures. The atom chip microscope can operate at maximum sensitivity and resolution without regard to the substrate temperature. While the BEC is among the coldest objects realizable (100 nK temperatures are typical), the atom chip substrate can be positioned 1 μm away from the BEC and be as hot as 400 K or as cold as the cryostat can cool. This is because unlike superconducting probes, whose temperature is closely coupled to nearby materials, quantum gases are immune to radiative heating. The energy gap between a Rb atom’s ground state and first excited state far exceeds the typical energy of room-temperature blackbody radiation; such atoms are therefore transparent to radiation heating by materials at room temperature or below. We experimentally demonstrated a new atom chip trapping system that allows the placement and high-resolution imaging of ultracold atoms within microns from any ≤100 μm-thin, UHV-compatible material, while also allowing sample exchange with minimal experimental downtime. The sample is not connected to the atom chip, allowing rapid exchange without perturbing the atom chip or laser cooling apparatus. Exchange of the sample and retrapping of atoms has been performed within a week turnaround, limited only by chamber baking. Moreover, the decoupling of sample and atom chip provides the ability to independently tune the sample temperature and its position with respect to the trapped ultracold gas, which itself may remain in the focus of a high-resolution imaging system. We confine 100-nK BECs of 104 87Rb atoms near a gold-mirrored 100-μm-thick silicon substrate. The substrate can be cooled to 35 K without use of a heat shield, while the atom chip, 120-μm away, remains at room temperature. Atoms may be imaged with 1-μm resolution and retrapped every 16 s, allowing rapid data collection. Straightforward improvements will allow us to push sample temperatures close to 4 K, and improve imaging resolution from 1 μm down to a few-100 nm, thereby providing 10 -9 Φ0 detection sensitivity. We will test the utility of this technique by imaging the magnetic fields emanating from electronic transport and domain percolation in several interesting examples of strongly correlated or topologically protected materials. STM, transport, and x-ray scattering experiments have, among others, revealed the existence of a quantum liquid crystal state in iron (pnictide) and cuprate superconductors. This strongly correlated state of matter could also be detected by imaging the fluctuating transport (spatially and in time) of electrons as the phase/regime boundary is crossed between the pnictide non-Fermi liquid (cuprate strange metal) and the pnictide magnetic phase (cuprate pseudogap regime). Our ability to image wide-area inhomogeneous current flow from room-temperature to <10 K will allow us to study the developing domain structure and transport near twin boundary interfaces through the T N ≈50–150 K nematic transition recently identified in bulk transport experiments by Ian Fisher's group in underdoped Fe-arsinide superconductors. Again, this highlights a main feature of our cryogenic atom chip microscope: the ability to image transport regardless of the sample temperature since the BEC, at nK temperatures, is transparent to blackbody radiation, even when held a microns from the surface.

36 MATERIALS SCIENCE↗

Wireless power transfer system

A system includes a first stage of an inductive power transfer system with an LCL load resonant converter with a switching section, an LCL tuning circuit, and a primary receiver pad. The IPT system includes a second stage with a secondary receiver pad, a secondary resonant circuit, a secondary rectification circuit, and a secondary decoupling converter. The secondary receiver pad connects to the secondary resonant circuit. The secondary resonant circuit connects to the secondary rectification circuit. The secondary rectification circuit connects to the secondary decoupling converter. The second stage connects to a load. The load includes an energy storage element. The second stage and load are located on a vehicle and the first stage is located at a fixed location. The primary receiver pad wirelessly transfers power to the secondary receiver pad across a gap when the vehicle positions the secondary receiver pad with respect to the primary receiver pad.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Simulation of the PBF-Candu test with coupled thermal-hydraulic and fuel thermo-mechanical responses

During a large loss-of-coolant accident (LLOCA), the fuel sheath temperature is influenced by thermal-hydraulic and thermo-mechanical phenomena. The thermal-hydraulic phenomena include the heat transfer from the sheath to the coolant and surroundings. Thermo-mechanical phenomena, such as creep and thermal expansion, influence the size of the fuel-to-sheath gap, and thus the heat transfer from the fuel to the sheath. Therefore, coupling the thermal-hydraulic and thermo-mechanical analysis of an LLOCA would result in more accurate predictions of sheath temperature. This is illustrated by comparing the sheath temperature predictions from coupled and decoupled simulations of the PBF-Candu Test with experimental measurements. The codes CATHENA and ELOCA were used for the thermal-hydraulic and thermo-mechanical analysis, respectively. The predicted sheath temperatures from both the coupled and decoupled simulations were higher than the measured values. However, after the initial power pulse, when the fuel-to-sheath gap was calculated as being opened, the sheath temperatures predicted by the coupled simulation were closer to the experimental measurements. Thus, under conditions of an open fuel-to-sheath gap, a coupled thermal-hydraulic and thermo-mechanical analysis can improve predictions of sheath temperatures. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of Rail Accident Rates for Spent Nuclear Fuel Rail Shipments - 17088

A key factor in evaluating the safety of rail shipments involving the transport of commercial spent nuclear fuel (SNF) is the development of transportation accident rates that are reflective of the unique characteristics associated with these train operations. Typical rail freight operations may involve consists of a hundred cars or more, which may pass through multiple rail yards for trains to be decoupled and reassembled. In contrast, trains carrying SNF are anticipated to be operated in consists of considerably fewer cars. Moreover, they could be operated in a dedicated fashion, thereby avoiding yard decoupling and reassembling activities in transiting from shipment origin to destination. This paper and presentation describes the methodology developed to estimate rail accident rates for future commercial SNF shipments and presents the corresponding results. The analysis utilizes the Federal Railroad Administration accident database, and takes into consideration accidents whose root causes are independent of the size of the consist, as well as those that are associated exclusively with yard activities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Energy deposition validation results for the evaluated electron data library in FRENSIE - 25357

The Framework for Research in Nuclear Science and Engineering (FRENSIE) is a collection of packages written in C++ that are designed primarily to aid in methods development. A recent development in FRENSIE is the modeling of single scattering electron interactions using the data in the Evaluated Electron Data Library (EEDL) from Lawrence Livermore National Laboratory (LLNL). Preliminary verification and validation (V and V) results using the well-known Lockwood energy deposition experiment and a comparison with MCNP6.2 were performed using several bivariate grid policies (Unit-base, Correlated, Unit-base Correlated), interpolation schemes (lin-lin, log-log, lin-log), and physics options (Coupled and Decoupled Elastic Scattering). The results show an agreement to within 0.5% between MCNP6.2 and FRENSIE when using the same bivariate grid policy (Correlated) and interpolation scheme (log-log). When compared to the experimental results of the Lockwood experiment, it was found that a Unit-base bivariate grid policy, lin-lin interpolation scheme, and lin-log interpolation scheme did not produce accurate results for the energy deposition in test problems. The log-log Correlated and Unit-base Correlated results showed the greatest agreement with the Lockwood experiment. The total energy deposition matched the experimental data to within 3%. Both the Correlated and Unit-base Correlated results had a tendency to estimate a higher energy deposition near the peaks and a lower energy deposition near the tails. The differences between coupled elastic scattering and decoupled scattering models were shown to be more prominent at higher energies with the results of the coupled elastic scattering being more accurate for the peak and less accurate for the tail of the energy deposition profiles. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

An Efficient Numerical Algorithm for Solving Coupled Time-Dependent Ginzburg-Landau Equation for Superconductivity and Elasticity

A decoupled finite element algorithm is developed for simulating the vortex dynamics on an elastic superconductor which couples the time-dependent Ginzburg- Landau equation with the complex-valued superconducting order parameter and the vector-valued magnetic potential, and the elasticity equation. We present an iterative algorithm for the decoupled system arising from the time and spatial discretization using a combination of preconditioner, algebraic multigrid method (AMG) and preconditioned conjugate gradient method (PCG). The iterative algorithm allows us to perform large-scale three-dimensional simulations of mesoscale pattern formation during superconducting phase transitions with arbitrary elastic boundary conditions. Here, the performance and efficiency of the algorithm are numerically verified by several benchmark problems, exhibiting up to two orders of magnitude improvement depending on the scale of discrete system compared to the exact solver.

Efficiency↗

WIMP-like Dark Matter Without Thermalization At Freeze-Out

In the standard thermal relic scenario, dark matter remains in chemical equilibrium with the Standard Model radiation bath until freeze-out occurs at $T \sim m_X/20$, where $m_X$ is the dark matter mass. In this familiar class of models, the observed relic density is obtained for annihilation cross sections of order $σv \sim 10^{-26}$ cm$^3$/s. We show that comparable cross sections can naturally be realized in hidden-sector models in which the dark matter and Standard Model sectors decouple at a very high temperature, $T \gg m_X$, and subsequently evolve with separate thermal histories. Despite this decoupling, the two sectors have similar temperatures during freeze-out, leading to the usual thermal relic abundance. As a consequence, the coupling between the Standard Model and hidden sectors can be extremely small, potentially placing direct detection and collider signals far below foreseeable sensitivities.

Hooper, Dan [Wisconsin U., Madison] (ORCID:0009000↗