Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Characterising the large coherence length at diamond’s beamline I13L

I13 is a 250 m long hard x-ray beamline (6 keV to 35 keV) at the Diamond Light Source. The beamline comprises of two independent experimental endstations: one for imaging in direct space using x-ray microscopy and one for imaging in reciprocal space using coherent diffraction based imaging techniques [1]. An outstanding feature of the coherence branch, due to its length and a new generation of ultra-stable beamline instrumentation [2], is its capability of delivering a very large coherence length well beyond 200 μm, providing opportunities for unique x-ray optical experiments. In this paper we discuss the challenges of measuring a large coherence length and present quantitative measurement based on analyzing diffraction patterns from a boron fiber [3]. We also discuss the limitations of this classical method in respect to detector performance, very short and long coherence lengths. Furthermore we demonstrate how a Ronchi grating setup [4] can be used to quickly establish if the beam is coherent over a large area.

43 PARTICLE ACCELERATORS↗

Modeling of Phase Transitions of Graphites to Diamond-Like Phases

The method of the density functional theory is used to study structural transformations between graphites and diamond-like phases. The calculations have been carried out in two approximations: a local density approximation and a generalized gradient approximation. It is found that the phase transitions of hexagonal graphene layers to a cubic diamond and diamond-like phases must occur at uniaxial compressions of ~57–71 GPa, whereas some diamond-like phases can be obtained from tetragonal graphene layers at significantly lower pressures of 32–52 GPa. The X-ray diffraction patterns have been calculated for the phase transition of graphite I4{sub 1}/amd to tetragonal LA10 phase that takes place at the minimum pressure that can be used for experimental identification of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sol-gel derived PZT films doped with vanadium pentoxide

The present research investigated the sol-gel preparation, dielectric and ferroelectric properties of PZT films doped with 5 mol% vanadium oxide. Stable PZTV sols can be readily formed, and homogeneous, micrometer thick and pinhole-free PZTV films were obtained by using spin coating followed with rapid annealing. The X-ray diffraction patterns revealed that no parasitic or secondary phases were formed in the sol-gel PZT films with the addition of vanadium oxide. The material doped with vanadium pentoxide showed enhanced dielectric constant and remanent polarization with reduced loss tangent and coercive field.

36 MATERIALS SCIENCE↗

Effects of Disodium Phosphate Concentration (Na{sub 2}HPO{sub 4}·2H{sub 2}O) on Microstructure and Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coatings on 2024 Al Alloy

Since the electrolyte composition plays a pivotal role in the microstructure and corrosion behavior of plasma electrolytic oxidation (PEO) coatings, the effects of disodium phosphate (Na{sub 2}HPO{sub 4}·2H{sub 2}O) concentration on the microstructure and corrosion resistance of PEO coatings fabricated on 2024 Al alloy were studied in this investigation. Accordingly, electrolyte with four different concentrations of phosphate ion (5, 10, 15 and 20 g/L) was used. All PEO processes were conducted at constant current density of 15 A/dm{sup 2} for 15 min. The surface and cross-sectional morphologies of the coatings indicated that the coating formed in the electrolyte with 10 g/L Na{sub 2}HPO{sub 4}·2H{sub 2}O (with 9.14 µm thickness) had the most compact and uniform structure with the lowest and smallest micropores. Furthermore, studying the corrosion behavior of samples in 3.5 wt.% NaCl solutions by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests revealed that the sample coated in the electrolyte with 10 g/L Na{sub 2}HPO{sub 4}·2H{sub 2}O had the highest corrosion potential, the lowest corrosion current density and, accordingly, the best corrosion resistance. The corrosion resistance of this coating was 4.574 × 10{sup 5} Ω cm{sup 2}, which could increase the corrosion resistance of uncoated 2024 Al alloy substrate 48 times. The x-ray diffraction pattern of this coating proved that the coating was composed of α-Al{sub 2}O{sub 3} and γ-Al{sub 2}O{sub 3} phases.

36 MATERIALS SCIENCE↗

The effect of Ni addition on the structure of Pt–Sn/C nanoparticles by electron microscopy

Highlights: • A typical Pt/SnO{sub 2} core–shell structure is present in Pt–Sn. • The most of SnO{sub 2} species are likely clustered in Pt–Sn. • SnO{sub 2} nanoparticles prefer to locate close to Pt–Sn–Ni nanoclusters. • Main crystallographic structures are either cubic Pt or PtSn{sub 2}. - Abstract: Carbon supported bimetallic Pt–Sn and trimetallic Pt–Sn–Ni nanoparticles were synthesized by Bönnemann's colloidal precursor method and characterized by high-resolution transmission electron microscopy (HR-TEM) and energy dispersive X-ray analysis (EDX) techniques. HR-TEM and EDX results demonstrated that SnO{sub 2} nanoparticles tend to form clusters in Pt–Sn/C; however, the presence of Ni in the Pt–Sn/C gives rise to an induced interaction between SnO{sub 2} and Pt nanoparticles. Electron diffraction patterns of Pt–Sn–Ni/C showed that either cubic Pt or PtSn{sub 2} structures are present. From the selected area EDX analysis, it was found that both of these structures contain Sn. This suggests that Pt–Sn–Ni/C nanoparticles may be partially covered by Sn-richer PtSn{sub 2} alloyed structure.

36 MATERIALS SCIENCE↗

Template synthesis and characterizations of nickel nanorods

Template assisted Ni nanorods were grown using electro-deposition process and investigated using an Analytical Transmission Electron Microscope. Transmission Electron Microscopy (TEM) images and diffraction patterns reveal the polycrystalline nature of grown Ni nanorods and the composition of these nanorods were verified using energy dispersive X-ray (EDX) spectroscopy. The morphology of the grown nanorods was also characterized using Scanning Electron Microscope (SEM).

36 MATERIALS SCIENCE↗

MILK : a Python scripting interface to MAUD for automation of Rietveld analysis

Modern diffraction experiments ( e.g. in situ parametric studies) present scientists with many diffraction patterns to analyze. Interactive analyses via graphical user interfaces tend to slow down obtaining quantitative results such as lattice parameters and phase fractions. Furthermore, Rietveld refinement strategies ( i.e. the parameter turn-on-off sequences) tend to be instrument specific or even specific to a given dataset, such that selection of strategies can become a bottleneck for efficient data analysis. Managing multi-histogram datasets such as from multi-bank neutron diffractometers or caked 2D synchrotron data presents additional challenges due to the large number of histogram-specific parameters. To overcome these challenges in the Rietveld software Material Analysis Using Diffraction ( MAUD ), the MAUD Interface Language Kit ( MILK ) is developed along with an updated text batch interface for MAUD . The open-source software MILK is computer-platform independent and is packaged as a Python library that interfaces with MAUD . Using MILK , model selection ( e.g. various texture or peak-broadening models), Rietveld parameter manipulation and distributed parallel batch computing can be performed through a high-level Python interface. A high-level interface enables analysis workflows to be easily programmed, shared and applied to large datasets, and external tools to be integrated with MAUD . Through modification to the MAUD batch interface, plot and data exports have been improved. The resulting hierarchical folders from Rietveld refinements with MILK are compatible with Cinema: Debye–Scherrer , a tool for visualizing and inspecting the results of multi-parameter analyses of large quantities of diffraction data. In this manuscript, the combined Python scripting and visualization capability of MILK is demonstrated with a quantitative texture and phase analysis of data collected at the HIPPO neutron diffractometer.

97 MATHEMATICS AND COMPUTING↗

Imaging single cells in a beam of live cyanobacteria with an X-ray laser (CXIDB ID 26)

This entry contains ten diffraction patterns, and reconstructions images, of individual living Cyanobium gracile cells, imaged using 517 eV X-rays from the LCLS XFEL. The Hawk software package was used for phasing. The Uppsala aerosol injector was used for sample injection, assuring very low noise levels. The cells come from various stages of the cell cycle, and were imaged in random orientations.

AMO↗

Determination of cations distribution in Mn[subscript 3]O[subscript 4] by anomalous x-ray powder diffraction

The oxidation states of Mn at two different crystallographic sites in the distorted spinel structure of Mn{sub 3}O{sub 4} were determined by the approach of anomalous synchrotron x-ray powder diffraction. The real parts of anomalous scattering factors for the two Mn sites were refined from a series of powder diffraction patterns collected at the vicinity of K absorption edge of Mn. The results of Rietveld refinements showed that the two distinct cation sites can obviously be distinguished from each other and that Mn{sup 2+} ions occupy the tetrahedral site and Mn{sup 3+} ions are located at the octahedral site.

43 PARTICLE ACCELERATORS↗

MULTI-SCALE DIFFRACTION STUDY OF REVERSIBLE/IRREVERSIBLE DEFORMATION MECHANISMS IN THE NI-BASED SUPERALLOYS DURING FATIGUE

In this study, a nickel-based polycrystalline is subjected to cyclic loading. The subsequent fatigue damage has been investigated with in-situ neutron-diffraction, thermal characterization for a single-phase, transmission-electron microscopy (TEM) and polychromatic X-ray microdiffraction (PXM). Different stages of fatigue damage are observed including bulk hardening, softening, and eventual saturation evident in the diffraction patterns and the thermal-evolution features. An increase in dislocation density is responsible for hardening within the early cycles. The transition to saturation cycles is characterized by the anisotropy of the lattice-strain evolution. Inhomogeneity of the thermal response and irreversible compression of the lattice planes and statistical dislocation structures are observed in the final saturation fatigue cycles. Analysis of the PXM-Laue patterns reveals cyclically-deformed microstructure near the grain boundaries, which are composed of the lattice rotations and grain subdivisions. The PXM results are in good agreement with the TEM results. Combined simulation/experimental analysis allows determination of slip-system dependent dislocation density in individual grains.

36 MATERIALS SCIENCE↗

Synthesis and structural characterization of ferrous trioctahedral smectites: Implications for clay mineral genesis and detectability on Mars

Widespread detections of phyllosilicates in Noachian terrains on Mars imply a history of near-surface fluid-rock interaction. Ferrous trioctahedral smectites are thermodynamically predicted products of basalt weathering on early Mars, but to date only Fe 3+ -bearing dioctahedral smectites have been identified from orbital observations. In general, the physicochemical properties of ferrous smectites are poorly studied because they are susceptible to air oxidation. In this study, eight Fe 2+ -bearing smectites were synthesized from Fe 2+ -Mg-Al silicate gels at 200°C under anoxic conditions. Samples were characterized by inductively coupled plasma optical emission spectrometry, powder X-ray diffraction, Fe K-edge X-ray absorption spectroscopy (XAS), Mössbauer spectroscopy, and visible/near-infrared (VNIR) reflectance spectroscopy. The range of redox states was Fe 3+ /ΣFe = 0 to 0.06 ± 0.01 as determined by both XAS and, for short integration times, Mössbauer. The smectites have 060 distances (d (060) ) between 1.53 and 1.56 Å, indicating a trioctahedral structure. d (060) and XAS-derived interatomic Fe-(Fe,Mg,Al) distance scaled with Fe content. Smectite VNIR spectra feature OH/H 2 O absorption bands at 1.4 and 1.9 µm, (Fe 2+ ,Mg,Al) 3 -OH stretching bands near 1.4 µm, and Fe 2+ Fe 2+ Fe 2+ -OH, MgMgMg-OH, AlAl(Mg,Fe 2+ )-OH, and AlAl-OH combination bands at 2.36 µm, 2.32 µm 2.25 µm, and 2.20 µm, respectively. The spectra for ferrous saponites are distinct from those for dioctahedral ferric smectites, permitting their differentiation from orbital observations. X-ray diffraction patterns for synthetic high-Mg ferrosaponite and high-Mg ferrian saponite are both consistent with the Sheepbed saponite detected by the chemistry and mineralogy (CheMin) instrument at Gale Crater, Mars, suggesting that anoxic basalt alteration was a viable pathway for clay mineral formation on early Mars.

58 GEOSCIENCES↗

Characterization of the carbides and the martensite phase in powder-metallurgy high-speed steel

A microstructural characterization of the powder-metallurgy high-speed-steel S390 Microclean was performed based on an elemental distribution of the carbide phase as well as crystallographic analyses. The results showed that there were two types of carbides present: vanadium-rich carbides, which were not chemically homogeneous and exhibited a tungsten-enriched or tungsten-depleted central area; and chemically homogeneous tungsten-rich M{sub 6}C-type carbides. Despite the possibility of chemical inhomogenities, the crystallographic orientation of each of the carbides was shown to be uniform. Using electron backscatter diffraction the vanadium-rich carbides were determined to be either cubic VC or hexagonal V{sub 6}C{sub 5}, while the tungsten-rich carbides were M{sub 6}C. The electron backscatter diffraction results were also verified using X-ray diffraction. Several electron backscatter diffraction pattern maps were acquired in order to define the fraction of each carbide phase as well as the amount of martensite phase. The fraction of martensite was estimated using band-contrast images, while the fraction of carbides was calculated using the crystallographic data.

36 MATERIALS SCIENCE↗

Low-temperature synthesis of AlN powder with multicomponent additive systems by carbothermal reduction-nitridation method

AlN powders were synthesized at low temperatures (1300 and 1400 {sup o}C) by the carbothermal reduction-nitridation (CRN) method using multicomponent additive systems. The synthesis treatments were conducted in a graphite furnace with flowing nitrogen gas between 1200 and 1500 {sup o}C using powder mixtures with Al{sub 2}O{sub 3}:C molar ratio of 1:3 and 0.5-3 wt% of CaF{sub 2}, Y{sub 2}O{sub 3}, Li{sub 2}CO{sub 3} and/or SrCO{sub 3} as additives. In relation to the conventional CRN process, the use of multicomponent additive systems reduced the synthesis temperature in 200 {sup o}C (CaF{sub 2}-SrCO{sub 3}), 100 {sup o}C (CaF{sub 2}-Li{sub 2}CO{sub 3} and CaF{sub 2}-Y{sub 2}O{sub 3}-Li{sub 2}CO{sub 3}) or <100 {sup o}C (CaF{sub 2}-Y{sub 2}O{sub 3} and CaF{sub 2}-Y{sub 2}O{sub 3}-Li{sub 2}CO{sub 3}-SrCO{sub 3}). X-ray diffraction patterns showed that the additives reacted with the alumina powder forming aluminate phases, which vaporized with the increase of synthesis temperature. The enhanced AlN conversion rate was discussed in terms of the vaporization of aluminates in the reducing atmosphere.

36 MATERIALS SCIENCE↗

Effect of film thickness on structural and mechanical properties of AlCrN nanocompoite thin films deposited by reactive DC magnetron sputtering

In this study, the influence of film thickness on the structural, surface morphology and mechanical properties of Aluminum chromium nitride (AlCrN) thin films has been successfully investigated. The AlCrN thin films were deposited on silicon (100) substrate using dc magnetron reactive co-sputtering at substrate temperature 400° C. The structural, surface morphology and mechanical properties were studied using X-ray diffraction, field-emission scanning electron microscopy and nanoindentation techniques respectively. The thickness of these thin films was controlled by varying the deposition time therefore increase in deposition time led to increase in film thickness. X-ray diffraction pattern of AlCrN thin films with different deposition time shows the presence of (100) and (200) orientations. The crystallite size varies in the range from 12.5 nm to 36.3 nm with the film thickness due to surface energy minimization with the higher film thickness. The hardness pattern of these AlCrN thin films follows Hall-Petch relation. The highest hardness 23.08 Gpa and young modulus 215.31 Gpa were achieved at lowest grain size of 12.5 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wide band gap gallium arsenide nanoparticles fabricated using plasma method

In this paper, we have reported the fabrication of gallium arsenide (GaAs) nanoparticles on quartz placed at distance of 4.0 cm, 5.0 cm and 6.0 cm, respectively from top of anode. The fabrication has been carried out by highly energetic and high fluence ions of GaAs produced by hot, dense and extremely non-equilibrium plasma in a modified dense plasma focus device. GaAs nanoparticles have mean size of about 23 nm, 16 nm and 14 nm for deposition at a distance of 4.0 cm, 5.0 cm and 6.0 cm, respectively. The nanoparticles are crystalline in nature as evident from X-ray diffraction patterns. The band gap of nanoparticles is found to increase from 1.425 eV to 5.37 eV at 4.0 cm distance, which further increases as distance increases. The wide band gap observed for fabricated GaAs nanoparticles suggest the possible applications of nanoparticles in laser systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fast x-ray microdiffraction techniques for studying irreversible transformations in materials.

A pair of techniques have been developed for performing time-resolved X-ray microdiffraction on irreversible phase transformations. In one technique capillary optics are used to focus a high-flux broad-spectrum X-ray beam to a 60 {micro}m spot size and a fast pixel array detector is used to achieve temporal resolution of 55 {micro}s. In the second technique the X-rays are focused with Kirkpatrick-Baez mirrors to achieve a spatial resolution better than 10 {micro}m and a fast shutter is used to provide temporal resolution better than 20 {micro}s while recording the diffraction pattern on a (relatively slow) X-ray CCD camera. Example data from experiments are presented where these techniques are used to study self-propagating high-temperature synthesis reactions in metal laminate foils.

43 PARTICLE ACCELERATORS↗

In Situ Synchrotron X-ray Study of the Mechanical Properties of Pure Mg Produced by Powder Metallurgy

In this study, in situ synchrotron X-ray experiments with wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) detectors were performed on two pure magnesium materials produced by powder metallurgy. According to SAXS analysis, each of the two materials has a porosity of less than 0.5%. Line broadening analysis was performed on diffraction patterns collected by WAXS to analyze the dislocation evolution during material deformation. In both materials, $<$a$>$-type dislocation activities dominate the tensile deformation. The influence of grain size and texture on the different tensile behaviors of these two materials is also discussed.

line profile analysis (LPA)↗

Pr{sup 3+}–Yb{sup 3+} codoped Y{sub 2}O{sub 3} phosphor for display devices

Graphical abstract: Concentration dependence of UC emission intensity for (a) Pr{sup 3+} ions and (b) Yb{sup 3+} ions in doped/codoped Y{sub 2}O{sub 3} phosphors. - Highlights: • Upconversion emission bands with their enhanced emission intensity have been observed on codoping of Yb{sup 3+} ions. • By using Scherrer’s formula and Hall–Williamson plot, the presence of nano-structured crystallites have been identified. • The decay curve analysis for the emitting level has been performed. • The codoped phosphor proves its suitability in making the visible upconverter and display devices. - Abstract: Efficient green colour emitting Pr{sup 3+}–Yb{sup 3+} codoped Y{sub 2}O{sub 3} phosphor prepared by low temperature solution combustion process has been investigated under the excitation with a 980 nm diode laser. Several upconversion emission bands from Pr{sup 3+} ions with their enhanced upconversion emission intensity have been observed on codoping of Yb{sup 3+} ions in the Y{sub 2}O{sub 3}:Pr{sup 3+} system. To identify the phase formation, size of crystallites and strain present in synthesized sample, X-ray diffraction pattern has been recorded. The decay curve analysis for the emitting level has also been performed along with power dependence study to clear the upconversion process. The tunability of colour emitted from the codoped phosphor has been examined which proves its suitability for display devices.

36 MATERIALS SCIENCE↗