Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensionless Numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Prospects for DVCS measurements using the COMPASS spectrometer at CERN

The study of exclusive reactions like Deeply Virtual Compton Scattering (DVCS) and Deeply Virtual Meson Production (DVMP) is one major part of the future COMPASS program to investigate nucleon structure through Generalized Parton Distributions (GPD). The high energy of the muon beam allows to measure the x{sub Bj}-dependence of the t-slope of the DVCS cross section and to study nucleon tomography. The use of positive and negative polarized muon beams allows to determine the Beam Charge and Spin Difference of the DVCS cross sections to access the real part of the Compton form factor related to the dominant GPD H. As a second phase a transversely polarized proton target will be used to collect data to constrain the GPD E. In preparation of the future measurements two DVCS test runs were performed in 2008 and 2009.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Long-range potential and the fine structure of the diffraction peak

The possibility of oscillations in the differential elastic cross section of hadron scattering at small momentum transfer is studied. It is shown that string-like quark potentials at large distances can lead to such small oscillations, and an analysis of the experimental data at small |t| allows the determination of the parameters of the potential.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Higgs boson photoproduction at the LHC

We present the current development of the photoproduction approach for the Higgs boson with its application to pp and pA collisions at the LHC. We perform a different analysis for the Gap Survival Probability, where we consider a probability of 3% and also a more optimistic value of 10% based on the HERA data for dijet production. As a result, the cross section for the exclusive Higgs boson production is about 2 fb and 6 fb in pp collisions and 617 and 2056 fb for pPb collisions, considering the gap survival factor of 3% and 10%, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Baryon to meson transition distribution amplitudes and their spectral representation

We consider the problem of construction of a spectral representation for nucleon to meson transition distribution amplitudes (TDAs), non-diagonal matrix elements of nonlocal three quark operators between a nucleon and a meson states. We introduce the notion of quadruple distributions and generalize Radyshkin's factorized Ansatz for this issue. Modelling of baryon to meson TDAs in the complete domain of their definition opens the way to quantitative estimates of cross-sections for various hard exclusive reactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DVCS with an EIC/eRHIC

An overview of the status of the diffractive physics program with the future EIC/eRHIC will be given. eRHIC is a machine designed to collide an electron beam with energies ranging from 5 GeV up to 20(30)GeV with a hadron beam (protons, nuclei) at an energy, which can be varied from 50 GeV up to 325 GeV. The high luminosity of the machine, expected in the order of 10{sup 34} cm{sup -2} s{sup -1}, will open the opportunity for very high precision measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

3.4 GHz composite thin film bulk acoustic wave resonator for miniaturized atomic clocks

Triple layer SiO{sub 2}/AlN/SiO{sub 2} composite thin film bulk acoustic wave resonators (TFBARs) were studied for applications in atomic clocks. The TFBAR's were tuned to 3.4 GHz, corresponding to half the hyperfine splitting of the ground state of rubidium {sup 87}Rb atoms. The quality factor (Q) was equal to 2300 and the temperature coefficient of the resonance frequency f{sub r} amounted to 1.5 ppm/K. A figure of merit Qf{sub r} of {approx} 0.8 x 10{sup 13} Hz and a thickness mode coupling factor of 1% were reached. Such figures are ideal for frequency sources in an oscillator circuit that tracks the optical signal in atomic clocks.

36 MATERIALS SCIENCE↗

Low-temperature synthesis of graphene on nickel foil by microwave plasma chemical vapor deposition

Microwave plasma chemical vapor deposition (MPCVD) was employed to synthesize high quality centimeter scale graphene film at low temperatures. Monolayer graphene was obtained by varying the gas mixing ratio of hydrogen and methane to 80:1. Using advantages of MPCVD, the synthesis temperature was decreased from 750 deg. C down to 450 deg. C. Optical microscopy and Raman mapping images exhibited that a large area monolayer graphene was synthesized regardless of the temperatures. Since the overall transparency of 89% and low sheet resistances ranging from 590 to 1855 {Omega}/sq of graphene films were achieved at considerably low synthesis temperatures, MPCVD can be adopted in manufacturing future large-area electronic devices based on graphene film.

36 MATERIALS SCIENCE↗

Ethanol Sensitivity of Cu{sub 1-x}Sn{sub x}O(x = 0.00, 0.03, and 0.05) Nanoflakes

Cu{sub 1-x}Sn{sub x}O(x = 0.00, 0.03, and 0.05) nanoflakes were synthesized by a simple wet chemical method and X-Ray diffraction (XRD) result confirms the monoclinic structure of CuO with no secondary phases due to Sn doping. The scanning electron microscopic images indicate the formation of nanoflakes. The fundamental Raman modes were observed at 273, 318, 610, and 1084 cm{sup -1} for undoped CuO sample and theses modes were slightly shifted towards lower frequency side for Sn-doped samples, which indicates the inclusion of Sn in CuO. In addition, XRD and Raman studies infer the decrease of crystallinity in doped samples, which is reflected in the sensitivity towards ethanol. The ethanol sensitivity (resistivity measurement) increases with ethanol gas concentration and decreases with Sn-doping in CuO nanoflakes.

36 MATERIALS SCIENCE↗

Emission Properties of Eu{sup 3+} Doped Different Chlorophosphate Glasses

Absorption and emission spectra of 0.5 mol% of Eu{sup 3+} in different chlorophosphate glasses have been studied. Judd-Ofelt analysis was performed to evaluate the emission properties such as radiative transition probabilities (A{sub rad}), branching ratios ({beta}), radiative lifetimes ({tau}{sub R}) and emission cross-sections ({sigma}{sub P}) for observed emission transitions of emission spectra of these glass matrices.

36 MATERIALS SCIENCE↗

Structural investigation of Li{sub 2}O-Bi{sub 2}O{sub 3}-B{sub 2}O{sub 3} glasses

The structural properties of x Li{sub 2}O(30-x)Bi{sub 2}O{sub 3}-70B{sub 2}O{sub 3}; x = 0, 5, 10, 15 and 20 mol %, glasses were investigated by means of FT-IR measurement technique. The IR analysis of the present glass system shows that with increase in lithium oxide content (x{<=}15 mol%), the frequency bands in the higher region shift towards lower wavenumber, suggest the conversion of BO{sub 3} to BO{sub 4} structural units, which in turn give rise to the formation of Non Bridging Oxygen's (NBOs). For further increase in lithium oxide content (x>15 mol %), the frequency bands shift towards higher wavenumber indicate the formation of Bridging Oxygen's (BOs).

36 MATERIALS SCIENCE↗

Optical Properties of Alkaline Earth Ions Doped Bismuth Borate Glasses

The optical properties of glasses with composition xLi{sub 2}O(30-x)Bi{sub 2}O{sub 3}-70B{sub 2}O{sub 3}; x = 0, 5, 10, 15 and 20 mol %, prepared by normal melt quench technique were investigated by means of UV-VIS measurement. It was observed that the optical band gap of the present glass system decreases with increasing Li{sub 2}O content up to 15 mol%, and with further increase in lithium oxide content i.e. x>15 mol% the optical band gap increases. It was also observed that the present glass system behaves as an indirect band gap semiconductor.

36 MATERIALS SCIENCE↗

EPR Study of Vanadium Ion in Zinc-Boro-Vanadate Glasses

This paper describes EPR studies on x V{sub 2}O{sub 5}-(40-x)ZnO-60B{sub 2}O{sub 3}(where x 5, 10, 15 and 20 mol %) glass system. These studies indicate a strong compositional dependent trend and existence of characteristic boro-vanadate groups in these glasses. The EPR spectra show a distinct hyperfine structure of {sup 51}V. Spectral analysis shows that the vanadium is present in the glass as vanadyl ion [VO]{sup 2+} at tetragonally distorted octahedral site. The decrease of A{sub ||} and A{sub perpendicular} with increase of V{sub 2}O{sub 5} concentration suggests an increase in the covalence between the central atom and the surrounding oxygen ligands.

36 MATERIALS SCIENCE↗

Theoretical Investigations of Electronic Properties of Se{sub 82-x}Bi{sub x}Te{sub 18} Thin Films

The effect of Bi on the structural and optical properties of Se{sub 82-x}Bi{sub x}Te{sub 18} glassy alloys is studied, theoretically. Cohesive energy is calculated by using chemical bond approach and is found to decrease with increasing Bi content. Optical band gap of thin films is calculated by Shimakawa's relation. The optical band gap decreases with increase in Bi content.

36 MATERIALS SCIENCE↗

Dielectric Properties Of Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-PbTiO{sub 3} Solid Solution Synthesized By Solid State Reaction Route

Phase pure (1-x)Pb(In{sub 1/2}Nb{sub 1/2})O{sub 3}-x PbTiO{sub 3} ceramics near morphotrophic phase boundary (x = 0.35) are prepared by conventional solid state reaction route, by adding 2 mol.% MgO. The dielectric properties of lead indium niobate-lead titanate ceramic are studied as a function of both temperature and frequency. For this composition the dielectric constant for 100 Hz increases from 1944 at room temperature to 1510 at Curie temperature(304 deg. C). The saturation polarization, measured at room temperature, is found to be 23.9 {mu}C/cm{sup 2} for 40 kV/cm.

36 MATERIALS SCIENCE↗

Magnetic and Magnetotransport Properties of (Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3}){sub 1-x}/NiO{sub x} Composites

In this paper, we report the structural, magnetic and magnetotransport properties of (Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3}){sub 1-x}/NiO{sub x}(x = 0, 0.05, 0.10, 0.15 and 0.20) composites samples. The composite samples have been synthesized in such a manner so that there is no reaction between Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3}(PSMO) and NiO. This has been confirmed by XRD and FESEM results. The magnetic measurements show reduction in ferromagnetic ordering in the composite samples with increasing level of NiO. Furthermore, incorporation of NiO phase into Pr{sub 0.7}Sr{sub 0.3}MnO{sub 3} matrix lowers the metal-insulator transition temperature (TIM) and increases the resistance of composites. An enhancement in magnetoresistance (MR) is observed at low temperature, below 140 K, for the composites with x = 0.05, 0.10 and 0.15 and at high temperature (298K) for all the composites at applied magnetic field H = 5 kOe. It is suggested that the higher value of MR at temperature below 140 K is low field magnetoresistance (LFMR) caused by spin polarized tunneling, whereas at around room temperature it is caused by magnetic disordering.

36 MATERIALS SCIENCE↗

Improved Scanning Geometry to Collect 3D-Geometry Data in Flat Samples

3D integration through silicon technology of integrated circuits challenges non-destructive testing methods. 3D x-ray methods are the techniques of choice to localize defects in interconnects. The development of high-power x-ray sources enabled the use of x-ray microscopy in laboratory tools. Those devices are able to resolve features down to 40 nm in an acceptable measurement time. However, the field of view is very limited to 16 {mu}m in high-resolution mode and to 65 {mu}m in large-field-of-view mode. To record tomography data, the size of the samples must not exceed the field of view to circumvent specific artifacts. Semiconductor samples usually do not fulfill the condition mentioned above since they have the shape of flat sheets. Therefore limited-angle tomography is typically used. The missing angles cause typical capping artifacts and poor signal-to-noise ratio. We present a modified scanning geometry that overcomes some of the artifacts and yields a better image quality. The geometry and potential applications are presented in comparison to the traditional limited-angle tomography.

07 ISOTOPE AND RADIATION SOURCES↗