SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This software contains the code for Bayesian uncertainty analysis of global lake area. Computed uncertainties are compared against more conventional estimation using lake size-abundance distributions. Routines are included to explore sensitivity to observational errors and ad-hoc "censoring" strategies.
Explore the source record for details and available documents.
In this letter, a simplified voltage sensitivity analysis technique that can provide accurate estimates of voltage change across the network for a given change in bus power injections in a three-phase unbalanced distribution network is proposed. This technique is derived from the first-order approximation of the Neumann series, which allows maintaining the accuracy of the solution while the computational effort is reduced. Here, the proposed technique is tested on a 559-bus unbalanced distribution system with multiple distributed generation resources. The results show that the average error in the voltage estimates with the proposed method is not more than 0.3% with the execution time of similar order relative to the state-of-the-art sensitivity analysis methods.
“Quantile-dependent expressivity” occurs when the effect size of a genetic variant depends upon whether the phenotype (e.g., serum uric acid) is high or low relative to its distribution. Analyses were performed to test whether serum uric acid heritability is quantile-specific and whether this could explain some reported gene-environment interactions. Methods. Serum uric acid concentrations were analyzed from 2151 sibships and 12,068 offspring-parent pairs from the Framingham Heart Study. Quantile-specific heritability from offspring-parent regression slopes (β OP , h 2 = 2β OP /(1 + r spouse )) and full-sib regression slopes (β FS ,h 2 = {(1 + 8r spouse β FS ) 0.5 - 1}/(2r spouse ) was robustly estimated by quantile regression with nonparametric significance assigned from 1000 bootstrap samples. Results. Quantile-specific h 2 (±SE) increased with increasing percentiles of the offspring’s sex- and age-adjusted uric acid distribution when estimated from β OP (P trend = 0.001): 0.34 ± 0.03 at the 10th, 0.36 ± 0.03 at the 25th, 0.41 ± 0.03 at the 50th, 0.46 ± 0.04 at the 75th, and 0.49 ± 0.05 at the 90th percentile and when estimated from β FS (P trend = 0.006). This is consistent with the larger genetic effect size of (1) the SLC2A9 rs11722228 polymorphism in gout patients vs. controls, (2) the ABCG2 rs2231142 polymorphism in men vs. women, (3) the SLC2A9 rs13113918 polymorphism in obese patients prior to bariatric surgery vs. two-year postsurgery following 29 kg weight loss, (4) the ABCG2 rs6855911 polymorphism in obese vs. nonobese women, and (5) the LRP2 rs2544390 polymorphism in heavier drinkers vs. abstainers. Quantile-dependent expressivity may also explain the larger genetic effect size of an SLC2A9/PKD2/ABCG2 haplotype for high vs. low intakes of alcohol, chicken, or processed meats. Conclusions. Heritability of serum uric acid concentrations is quantile-specific.
“Quantile-dependent expressivity” occurs when the effect size of a genetic variant depends upon whether the phenotype (e.g. adiponectin) is high or low relative to its distribution. We have previously shown that the heritability ( h 2 ) of adiposity, lipoproteins, postprandial lipemia, pulmonary function, and coffee and alcohol consumption are quantile-specific. Whether adiponectin heritability is quantile specific remains to be determined. Plasma adiponectin concentrations from 4,182 offspring-parent pairs and 1,662 sibships from the Framingham Heart Study were analyzed. Quantile-specific heritability from offspring-parent (β OP , h 2 = 2 β OP /(1 + r spouse )) and full-sib regression slopes ( β FS , h 2 = {(1 + 8r spouse β FS ) 0.05 -1}/(2r spouse )) were robustly estimated by quantile regression with nonparametric significance assigned from 1,000 bootstrap samples. Quantile-specific h 2 (± SE) increased with increasing percentiles of the offspring’s age- and sex-adjusted adiponectin distribution when estimated from β OP ( P trend = 2.2 × 10 -6 ): 0.30 ± 0.03 at the 10th, 0.33 ± 0.04 at the 25th, 0.43 ± 0.04 at the 50th, 0.55 ± 0.05 at the 75th, and 0.57 ± 0.08 at the 90th percentile, and when estimated from β FS (P trend = 7.6 × 10 -7 ): 0.42 ± 0.03 at the 10th, 0.44 ± 0.04 at the 25th, 0.56 ± 0.05 at the 50th, 0.73 ± 0.08 at the 75th, and 0.79 ± 0.11 at the 90th percentile. Consistent with quantile-dependent expressivity, adiponectin’s: (1) heritability was greater in women in accordance with their higher adiponection concentrations; (2) relationships to ADIPOQ polymorphisms were modified by adiposity in accordance with its adiponectin-lowering effect; (3) response to rosiglitazone was predicted by the 45T> G ADIPOQ polymorphism; (4) difference by ADIPOQ haplotypes increased linearly with increasing postprandial adiponectin concentrations. Adiponectin heritability is quantile dependent, which may explain sex-specific heritability, gene-environment and gene-drug interactions, and postprandial response by haplotypes.
This paper provides a method to assess the impact of multiple mitigation solutions including distribution grid upgrades and advanced control technologies on increasing distributed PV penetration in distribution feeders, and thus paves the way to estimate the costs needed for reaching certain PV penetration level. Based on three assumptions of creating increasing PV penetration scenarios, this paper first studies the distribution impact of PV power and quantifies the PV hosting capacity in distribution feeders. Then, it studies multiple mitigation solutions to increase PV penetration on distribution feeders. These mitigation solutions are implemented in a sequential manner according to their typical costs. The proposed study is demonstrated on two representative distribution feeders.
The increasing integration of distributed energy resources (DERs) on the electric grid brings new challenges and opportunities for utility grid operations. With the rapid deployment of DERs, there is emerging interest in integrating these controllable devices with utility operations at all levels for monitoring and management. To understand the challenges with increasing behind-the-meter (BTM) DERs and to identify the needs in deploying advanced controls, a comprehensive grid impact study is indispensable. This paper presents the analysis which help visualize the DER impact on the grid, identify the challenges and provides an insight into the new distribution management and control needs to enable reliable and resilient grid operations.
We report networks are a fundamental and flexible way of representing various complex systems. Many domains such as communication, citation, procurement, biology, social media, and transportation can be modeled as a set of entities and their relationships. Temporal networks are a specialization of general networks where every relationship occurs at a discrete time. The temporal evolution of such networks is as important to understand as the structure of the entities and relationships. We present the Independent Temporal Motif (ITeM) to characterize temporal graphs from different domains. ITeMs can be used to model the structure and the evolution of the graph. In contrast to existing work, ITeMs are edge-disjoint directed motifs that measure the temporal evolution of ordered edges within the motif. For a given temporal graph, we produce a feature vector of ITeM frequencies and the time it takes to form the ITeM instances. We apply this distribution to measure the similarity of temporal graphs. We show that ITeM has higher accuracy than other motif frequency-based approaches. We define various ITeM-based metrics that reveal salient properties of a temporal network. We also present importance sampling as a method to efficiently estimate the ITeM counts. We present a distributed implementation of the ITeM discovery algorithm using Apache Spark and GraphFrame. We evaluate our approach on both synthetic and real temporal networks.
A key input in modeling population distribution and flows following conflict events is the inclusion of Internally Displaced Person (IDP) flows between administrative units within a country. These flows are critical for capturing population movement and redistribution driven by current events, particularly conflict. In some cases, IDP destination data are available while origin data is incomplete or unavailable. This creates a gap in understanding where displacement is occurring, limiting the ability to model population redistribution accurately. Without origin data, it is not possible to reallocate population flows or accurately represent where displacement is occurring within the country. This report evaluates whether Armed Conflict Location Event Data (ACLED) political violence event data can be used to estimate IDP origin distributions when direct origin data are unavailable. The approach is validated using historical IDP flow data from Lebanon, where both origins and destinations are observed. Results show that ACLED event distributions strongly correspond to observed IDP-origin patterns, particularly when using cumulative 60-day event windows. The method is most reliable for identifying major origin districts and approximating proportional origin shares. However, it is not intended to reconstruct exact individual displacement flows, but rather to provide a probabilistic spatial allocation of displacement origins.
“Quantile-dependent expressivity” occurs when the effect size of a genetic variant depends upon whether the phenotype (e.g., C-reactive protein, CRP) is high or low relative to its distribution. We have previously shown that the heritabilities ( h 2 ) of coffee and alcohol consumption, postprandial lipemia, lipoproteins, leptin, adiponectin, adiposity, and pulmonary function are quantile-specific. Whether CRP heritability is quantile-specific is currently unknown. Methods Serum CRP concentrations from 2,036 sibships and 6,144 offspring-parent pairs were analyzed from the Framingham Heart Study. Quantile-specific heritability from full-sib (β FS , h 2 ={(1 + 8r spouse β FS ) 0.5 - 1}/(2r spouse )) and offspring-parent regression slopes (β OP , h 2 = 2β OP /(1 + r spouse )) were estimated robustly by quantile regression with nonparametric significance determined from 1,000 bootstrap samples. Results Quantile-specific h 2 (±SE) increased with increasing percentiles of the offspring’s age- and sex-adjusted CRP distribution when estimated from β OP ( P trend = 0.0004): 0.02 ± 0.01 at the 10th, 0.04 ± 0.01 at the 25th, 0.10 ± 0.02 at the 50th, 0.20 ± 0.05 at the 75th, and 0.33 ± 0.10 at the 90th percentile, and when estimated from β FS ( P trend = 0.0008): 0.03±0.01 at the 10th, 0.06 ± 0.02 at the 25th, 0.14 ± 0.03 at the 50th, 0.24 ± 0.05 at the 75th, and 0.53 ± 0.21 at the 90th percentile. Conclusion Heritability of serum CRP concentration is quantile-specific, which may explain or contribute to the inflated CRP differences between CRP (rs1130864, rs1205, rs1800947, rs2794521, rs3091244), FGB (rs1800787), IL-6 (rs1800795, rs1800796), IL6R (rs8192284), TNF- α (rs1800629) and APOE genotypes following CABG surgery, stroke, TIA, curative esophagectomy, intensive periodontal therapy, or acute exercise; during acute coronary syndrome or Staphylococcus aureus bacteremia; or in patients with chronic rheumatoid arthritis, diabetes, peripheral arterial disease, ankylosing spondylitis, obesity or inflammatory bowel disease or who smoke.
We propose an approach to directly estimate the moments or marginals for a high-dimensional equilibrium distribution in statistical mechanics by solving the high-dimensional Fokker–Planck equation in terms of low-order cluster moments or marginals. With this approach, we bypass the exponential complexity of estimating the full high-dimensional distribution and directly solve the simplified partial differential equations for low-order moments/marginals. Moreover, the proposed moment/marginal relaxation is fully convex and can be solved via off-the-shelf solvers. We further propose a time-dependent version of the convex programs to study non-equilibrium dynamics. In a specific setting, we show the proposed method can recover a mean-field-type equilibrium density. Numerical results are provided to demonstrate the performance of the proposed algorithm for high-dimensional systems.
This paper presents a probabilistic data-driven method to model the uncertainty of distributed photovoltaic (PV) generation to enhance the observability of distribution grids with a high penetration of renewable resources. The proposed method employs a kernel density estimation (KDE) technique to develop the conditional probability density function (PDF) of PV outputs given the time of the day, using the measurement data from observed PV systems. Then time series of output power of unmeasured PV generators, located at the same grid, are generated according to the corresponding PDF and used as pseudo-measurements in distribution system state estimation (DSSE). The proposed model has been tested and verified using real PV data and utility networks.
This paper performs research on predicting Photovoltaic (PV) inverters reliability and lifetime based on thermal cycling. Thermal cycling is considered the most important stressors in an inverter system. In order to achieve this, a detailed electro-thermal model of the PV inverter will be developed along with their controllers capable of providing voltage support through reactive power. An in-house inverter was built, and a PV inverter model was developed to match the physical inverter. The PV inverter electrothermal model was validated for different ambient temperatures to match the in-house inverter hardware. The in-house inverter was placed inside a thermal chamber to emulate different ambient temperatures and their losses and temperature rises within the system were measured. After the validation of the model, a reduced order model of the inverter will be implemented to translate the mission profile of ambient temperature and solar irradiance into load profile of junction temperatures of the switches. The junction temperature data will be used to identify the reliability indices and hence predict the useful lifetime of the inverter system. Along with the model to predict useful lifetime of the system, the impact of reactive power on the overall reliability of the system will be studied. The key observation in this paper shows that lifetime of the inverter decreases as the operating power factor moves away from unity.
Heterogeneity in surface fuels produced by overstory trees and understory vegetation is a major driver of fire behavior and ecosystem dynamics. Previous attempts at predicting tree leaf and needle litter accumulation over time have been constrained in scope to probabilistic models that consider a limited number of key factors influencing tree litter dispersal patterns and decomposition processes. Here we present a mechanistic model for estimating variation in surface fuels called the Distribution of Understory using Elliptical Transport (DUET). DUET uses a pre-generated voxelated canopy array and distributes the leaf litter from the trees in an elliptical shape based on tree species characteristics, wind data, and location-specific features. DUET then calculates grass growth between trees and around the litter patterns and sets moisture levels based on relative humidity. In this study, we use DUET to simulate spatial distributions of leaf litter and illustrate model sensitivity to several parameters, providing inputs for testing fuel spatial heterogeneity impacts on fire behavior using process-based models.
Distribution control applications such as volt/var optimization, network reconfiguration, and distribution automation require accurate knowledge of the distribution system state. The lack of sufficient sensors on the primary side of distribution networks often limits the accuracy of the control decisions by these applications. The deployment of advanced metering infrastructure (AMI) provides utilities an opportunity to translate the AMI data on the secondary onto the primary so that it can be used as pseudo-measurements to augment the limited existing measurements on the primary. This paper develops a machine learning based approach for estimating service transformer primary-side voltages by using limited secondary-side AMI measurement. The machine learning model is developed by using random forest algorithm. The estimated primary-side voltages can be used by utilities as pseudo-measurements for distribution control applications. The detailed secondary model topology, which is an essential input data for many existing algorithms, is not required for the proposed method. The performance of the proposed method is validated by using AMI measurements from the field and an actual distribution feeder model of San Diego Gas & Electric Company.
The precise estimation of Rate Of Change Of Frequencies (ROCOFs) in a generation trip event can be helpful on power system inertia estimation, fast system response, and accurate event capturing. However, the ROCOF estimations from the existing Synchronized Measurement Devices (SMDs) are usually simply calculated by the finite difference between two adjacent frequency measurement points. The ineluctable noises, disturbances, and spikes from real-world frequency measurements can bring large dynamics to the ROCOF estimation and thus can result in an inaccurate estimation of the initial ROCOF. This issue becomes more serious when the target power grid has low inertia, and a large amount of distributed energy sources are deployed. To address this issue, a precise ROCOF estimation algorithm is designed based on least square method with flexible window size. In addition, a median filter is also designed and applied on the frequency measurements before using the proposed algorithm. The window size and thresholds in the proposed algorithm are determined with historical event data analysis. The proposed algorithm is deployed in a low cost, flexible, and distribution level universal grid analyzer (UGA) platform. In conclusion, multiple experiments are conducted in both a laboratory and the Hawaiian Islands to verify the effectiveness of the proposed algorithm.
Accurate estimation of the power curve for wind turbines or wind farms is crucial to ensure their efficient operation and management. However, conventional methods for power curve estimation rely either on expensive and infrequent measurements or on low-quality numerical simulations. Moreover, the majority of previous studies on power curve estimation for wind turbines or wind farms focused on deterministic estimation, which provides a point estimate of the relationship between wind speed and power generation. Nevertheless, the deterministic approach fails to consider the inherent uncertainty associated with wind energy production resulting from varying turbine characteristics. This can lead to inaccurate power generation estimation and suboptimal decisions regarding energy management. In this paper, a kernel density estimation (KDE) based Multi-Fidelity Gaussian Process Regression (MFGPR) model is proposed to fuse theoretical power curve data and the ground true measurements to create a mapping of wind speed and wind power. By conducting a case study on an actual wind farm in China, the efficacy of the proposed MFGPR model was demonstrated in characterizing the variability of wind power. The probabilistic MFGPR model was also able to generate confidence intervals that encompassed the measured power, thereby improving the accuracy and confidence in wind power estimation or wind resource assessment. Overall, the proposed MFGPR model offers a reliable approach to integrate high-fidelity ground measurements and theoretical power curve data, resulting in precise wind resource assessment and power estimation.
Thermal Energy Storage (TES) is a fundamental component in concentrating solar power (CSP) plants to increase the plant's dispatchability, capacity factor, while reducing the levelized cost of electricity. In central receivers CSP plants, nitrate molten salts have been used for several years for operation temperatures of up to 565 degrees C. Despite many efforts to advance nitrate salt to higher operation temperatures (even considering a replacement with molten chloride salts) to achieve higher energy conversion efficiencies, the 565 degrees C temperature is currently considered the state-of-the art. Although molten salt tanks have been broadly deployed in commercial CSP plants worldwide, several failures have been reported in these tanks after a few months or years of operation, causing significant economic loss and mistrust in CSP technologies. Most of these failures are associated with the infancy of the technology and multiple issues related to tank design, fabrication, commissioning, and aggressive operation. A technical standard dedicated to the design and fabrication of molten nitrate TES tanks does not exist today. Current in-service molten salt tanks have been generally designed based on the American Petroleum Institute's (API) 650 and ASME Section II standards. The API 650 code provides guidelines for dimensions and fabrication for oil storage tanks up to 260 degrees C. The ASME standard provides allowable stress values for various materials at a range of temperatures and conditions. Both standards seem to be limited for molten salt TES tanks where high temperatures, thermal cycling, and transient conditions are expected. In 2020, NREL released the Concentrating Solar Power Best Practices Study (NREL/TP-5500-75763) that summarized multiple issues in CSP plants, along with potential alternatives and recommendations to address those issues based on information collected from participants representing about 80% of operating CSP plants in the world. One of the recommendations from this study was the development of accurate and validated models to evaluate the plant's transient operation, capable of capturing the effect of short-term clouds and operator response, while being flexible in being adapted to various spatial and temporal resource data. The "Failure Analysis for Molten Salt Thermal Energy Tanks for In-Service CSP Plants" project was inspired on this recommendation and was focused on (1) the development and validation of a physics-based model for a representative, commercial-scale molten salt tank, (2) performing simulations to evaluate the behavior of the tank as a function of typical plant operation conditions, (3) understanding tank failures mechanisms, (4) determining the residual stress and distortion in the tank floor after welding fabrication and evaluating their impact in the stresses developed in the tank during operation, (5) assessing the impact of key operation parameters on the temperature and stress distribution, (6) conduct a preliminary evaluation of design features to reduce stress and improve tank's reliability, and (7) estimate the tank's service life based on the stress developed under diverse operation scenarios. From the analysis conducted in the project and presented in this report, it was found that maximum stresses surpassing the yield strength point of the stainless steel (SS) 347H are developed on the tank floor near the perimeter. These large stresses are strongly influenced by the initial residual stresses and distortion of the tank floor after welding fabrication. During operation, large stresses are developed in the tank floor at high operation temperatures with large salt inventory levels during transient operation. High stresses are also related to elevated temperature gradients in the tank floor that could be attributed to insufficient mixing within the salt inflow and the salt inventory. Based on the analysis, creep is the predominant failure mechanism. However, the large stress levels could favor the plastic deformation into buckles, and crack formation due to stress relaxation cracking during cycle operation. A lifetime below 3 years was estimated for the typical plant operation conditions and a specific initial residual stress and deformation distribution of the tank floor. The estimated life agrees with the service time to failure reported in several commercial molten salt tanks. Desing and operation guidelines can be extracted from the analysis presented in this report, which could be adopted by tank manufacturers and CSP operators to advance toward an ultimate solution for tank failures by reducing residual and operational stresses to achieve a tank service life of more than 30 years. Addressing failures in molten salt TES tanks is fundamental for the CSP industry's survivability, but it is also important for other industrial and power generation applications using this technology, including nuclear and concentrating solar thermal.