Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamical correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Ultrafast spin-nematic and ferroelectric phase transitions induced by femtosecond light pulses

We report, optically induced phase transitions of the manganite Pr 1/3 Ca 2/3 MnO 3 have been simulated by using a model Hamiltonian that captures the dynamics of strongly correlated charge, orbital, lattice, and spin degrees of freedom. Its parameters have been extracted from first-principles calculations. Beyond a critical intensity of a femtosecond light pulse, the material undergoes an ultrafast and nonthermal magnetic phase transition from a noncollinear to collinear antiferromagnetic phase. The light-pulse excites selectively either a spin-nematic or a ferroelectric phase, depending on the light polarization. The behavior can be traced to an optically induced ferromagnetic coupling between Mn trimers, i.e., polarons which are delocalized over three Mn sites. The polarization guides the polymerization of the polaronic crystal into distinct patterns of ferromagnetic chains determining the target phase.

36 MATERIALS SCIENCE↗

Unraveling higher-order contributions to spin excitations probed using resonant inelastic x-ray scattering

Resonant inelastic x-ray scattering (RIXS) is an evolving tool for investigating the spin dynamics of strongly correlated materials, which complements inelastic neutron scattering. In isotropic spin-$\frac{1}{2}$ Heisenberg antiferromagnetic (HAFM) spin chains, both techniques have observed non-spin-conserving (NSC) excitations confined to the two-spinon phase space. However, a recent O K-edge RIXS study of the one-dimensional HAFM Sr 2 CuO 3 observed spin-conserving (SC) four-spinon excitations outside the two-spinon phase space. Here, we demonstrate that analogous four-spinon excitations can also be accessed at the Cu L 3 edge in the related material SrCuO 2 . Through detailed modeling, we establish that these excitations appear in both the SC and NSC channels of the Cu L 3 edge, and are only captured by higher-order terms in the ultrashort core-hole lifetime expansion. Finally, since these terms encode information about spin-spin correlations extending beyond nearest neighbors, our results offer different possibilities for studying nonlocal spin correlations in quantum magnets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Currents and Green's functions of impurities out of equilibrium: Results from inchworm quantum Monte Carlo

Here, we generalize the recently developed inchworm quantum Monte Carlo method to the full Keldysh contour with forward, backward, and equilibrium branches to describe the dynamics of strongly correlated impurity problems with time-dependent parameters. We introduce a method to compute Green's functions, spectral functions, and currents for inchworm Monte Carlo and show how systematic error assessments in real time can be obtained. We then illustrate the capabilities of the algorithm with a study of the behavior of quantum impurities after an instantaneous voltage quench from a thermal equilibrium state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum error mitigation for Fourier moment computation

Hamiltonian moments in Fourier space—expectation values of the unitary evolution operator under a Hamiltonian at different times—provide a convenient framework to understand quantum systems. They offer insights into the energy distribution, higher-order dynamics, response functions, correlation information, and physical properties. This paper focuses on the computation of Fourier moments within the context of a nuclear effective field theory on superconducting quantum hardware. The study integrates echo verification and noise renormalization into Hadamard tests using control reversal gates. These techniques, combined with purification and error suppression methods, effectively address quantum hardware decoherence. The analysis, conducted using noise models, reveals a significant reduction in noise strength by two orders of magnitude. Moreover, quantum circuits involving up to 266 gates over five qubits demonstrate high accuracy under these methodologies when run on IBM superconducting quantum devices. Published by the American Physical Society 2025

Kiss, Oriel (ORCID:0000000174613342)↗

A general Bayesian algorithm for the autonomous alignment of beamlines

Autonomous methods to align beamlines can decrease the amount of time spent on diagnostics, and also uncover better global optima leading to better beam quality. The alignment of these beamlines is a high-dimensional expensive-to-sample optimization problem involving the simultaneous treatment of many optical elements with correlated and nonlinear dynamics. Bayesian optimization is a strategy of efficient global optimization that has proved successful in similar regimes in a wide variety of beamline alignment applications, though it has typically been implemented for particular beamlines and optimization tasks. In this paper, we present a basic formulation of Bayesian inference and Gaussian process models as they relate to multi-objective Bayesian optimization, as well as the practical challenges presented by beamline alignment. We show that the same general implementation of Bayesian optimization with special consideration for beamline alignment can quickly learn the dynamics of particular beamlines in an online fashion through hyperparameter fitting with no prior information. We present the implementation of a concise software framework for beamline alignment and test it on four different optimization problems for experiments on X-ray beamlines at the National Synchrotron Light Source II and the Advanced Light Source, and an electron beam at the Accelerator Test Facility, along with benchmarking on a simulated digital twin. We discuss new applications of the framework, and the potential for a unified approach to beamline alignment at synchrotron facilities.

47 OTHER INSTRUMENTATION↗

Toward wide-spectrum antivirals against coronaviruses: Molecular characterization of SARS-CoV-2 NSP13 helicase inhibitors

To date, effective therapeutic treatments that confer strong attenuation against coronaviruses (CoVs) remain elusive. Among potential drug targets, the helicase of CoVs is attractive due to its sequence conservation and indispensability. We rely on atomistic molecular dynamics simulations to explore the structural coordination and dynamics associated with the SARS-CoV-2 Nsp13 apo enzyme, as well as their complexes with natural ligands. A complex communication network is revealed among the five domains of Nsp13, which is differentially activated because of the presence of the ligands, as shown by shear strain analysis, principal components analysis, dynamical cross-correlation matrix analysis, and water transport analysis. The binding free energy and the corresponding mechanism of action are presented for three small molecules that were shown to be efficient inhibitors of the previous SARS-CoV Nsp13 enzyme. Together, our findings provide critical fresh insights for rational design of broad-spectrum antivirals against CoVs.

59 BASIC BIOLOGICAL SCIENCES↗

Investigating the p--π ± and p--p--π ± dynamics with femtoscopy in pp collisions at $\sqrt{s}$ = 13 TeV

The interaction between pions and nucleons plays a crucial role in hadron physics. It represents a fundamental building block of the low-energy QCD dynamics and is subject to several resonance excitations. This work studies the p--π ± dynamics using femtoscopic correlations in high-multiplicity pp collisions at $\sqrt{s}$ = 13 TeV measured by ALICE at the LHC. As the final-state interaction between protons and pions is well constrained by scattering experiments and the study of pionic hydrogen, the results give access to information on the particle-emitting source in pp collisions using the femtoscopy methods. The scaling of the source size of primordial protons and pions against their pair transverse mass is extracted. The results are compared with the source sizes studied with p–p, p--K + , and π ± –π ± pairs by ALICE in the same collision system and are found to be in agreement for the different particle pairs. This reinforces recent findings by ALICE of a common emission source for all hadron-pairs in pp collisions at LHC energies. Furthermore, the p--p--π ± systems are studied using three-particle femtoscopy in pp collisions at TeV. The presence of three-body effects is analyzed utilizing the cumulant expansion method. In this formalism, the known two-body interactions are subtracted in order to isolate the three-body effects. For both, p--p--π + and p--p--π – , a non-zero cumulant is found, indicating effects beyond pairwise interactions. These results give information on the coupling of the pion to multiple nucleons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Detecting outbreaks using a spatial latent field

In this paper, we present a method for estimating the infection-rate of a disease as a spatial-temporal field. Our data comprises time-series case-counts of symptomatic patients in various areal units of a region. We extend an epidemiological model, originally designed for a single areal unit, to accommodate multiple units. The field estimation is framed within a Bayesian context, utilizing a parameterized Gaussian random field as a spatial prior. We apply an adaptive Markov chain Monte Carlo method to sample the posterior distribution of the model parameters condition on COVID-19 case-count data from three adjacent counties in New Mexico, USA. Our results suggest that the correlation between epidemiological dynamics in neighboring regions helps regularize estimations in areas with high variance (i.e., poor quality) data. Using the calibrated epidemic model, we forecast the infection-rate over each areal unit and develop a simple anomaly detector to signal new epidemic waves. Our findings show that anomaly detector based on estimated infection-rates outperforms a conventional algorithm that relies solely on case-counts.

Safta, Cosmin [Sandia National Laboratories (SNL-C↗

Electronic Structure Theories of Singlet Fission and Multiple Exciton Generation (Final Report)

This DOE grant supported the development of electronic structure theory, algorithms, and computer programs for simulating singlet fission and multiple excision generation processes from Sept. 2013 to Aug. 2018 (which was terminated due to the PI’s departure from Northwestern University to industry). One of the main achievements is the development of the so-called active space decomposition (ASD) method hat describes exciton dynamics in organic semiconductors and spin dynamics in strongly correlated materials. The resulting software was interfaced with the Brilliantly Advanced General Electronic-structure Library (BAGEL) package and widely disseminated to the research community.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A spatially regularized detector for emergent/re-emergent disease outbreaks

Early detection of outbreaks caused by emergent pathogens, using epidemiological surveillance data i.e., daily case counts, is difficult. This is because the data tend to be noisy during the early epoch of the outbreak. In contrast, the spread-rate of the disease tends to be well-behaved, as it depends only on the mixing patterns of the population and the characteristics of the pathogen, neither of which behave erratically in space-time. In this report, we explore whether the spread-rate can be used for epidemiological surveillance, conditional on case count data. Estimating the spread-rate from case count data allows us to exploit exogenous information, e.g., incubation period distributions etc., which can considerably smooth out any erratic temporal behavior. Further, epidemiological dynamics are spatially correlated, and if case counts are available for multiple areal units e.g., counties, these correlations could potentially be used to suppress noise in the early epoch data. These exogenous information and structure are not exploited by conventional syndromic surveillance detectors to extract a well-behaved latent variable for monitoring purposes. The technical challenge lies in the estimation of the spread-rate field jointly over a collection of areal units; further, the spread-rate varies over time. We develop a method based on mean-field variational inference to approximately estimate the spread-rate field, using a Gaussian Random Field Model for spatial regularization. The method is tested on the estimation of spread-rate in the thirty-three counties of New Mexico and detect the arrival of the Fall 2020 COVID-19 wave in September 2020. We find that the method is scalable, but underestimates the uncertainty in the estimated spread-rate field. We detect the arrival of the Fall 2020 wave a week ahead of conventional syndromic surveillance algorithms, but our simplistic detection algorithm, based on simple anomaly detection, suffers from a high false positive rate, similar to conventional detectors.

59 BASIC BIOLOGICAL SCIENCES↗

On the role of the magnetic field in the solar wind interaction with Venus - Expectations versus observations

Observations of the magnetic field near Venus suggest that elements of three different models (direct interaction, tangential discontinuity, magnetic barrier) are present. A bow shock is found to occur at an altitude of about 0.3 Venus radii at the subsolar point. The compression of the decelerated solar wind plasma behind the bow shock causes interplanetary field lines to 'pile up'. The magnetic field inside the bow shock increases from approximately twice the IMF strength at the bow shock to values in the range of approximately 40-100 gammas at altitudes between about 200 and 1,200 km. The maximum value of the piled up field, which is correlated with the dynamic pressure of the solar wind outside the bow shock, is found at lower altitudes for larger field strengths. Just Venus-ward of the maximum field, the pressure of the cold plasma increases to a level balancing the pressure of the external magnetic field. Hence, to a first approximation, the ionosphere has a diamagnetic response excluding the magnetosheath field. However, strong magnetic fields are found at times throughout the ionosphere.

Luhmann, J. G.↗

Assessment of Galileo modal test results for mathematical model verification

The modal test program for the Galileo Spacecraft was completed at the Jet Propulsion Laboratory in the summer of 1983. The multiple sine dwell method was used for the baseline test. The Galileo Spacecraft is a rather complex 2433 kg structure made of a central core on which seven major appendages representing 30 percent of the total mass are attached, resulting in a high modal density structure. The test revealed a strong nonlinearity in several major modes. This nonlinearity discovered in the course of the test necessitated running additional tests at the unusually high response levels of up to about 21 g. The high levels of response were required to obtain a model verification valid at the level of loads for which the spacecraft was designed. Because of the high modal density and the nonlinearity, correlation between the dynamic mathematical model and the test results becomes a difficult task. Significant changes in the pre-test analytical model are necessary to establish confidence in the upgraded analytical model used for the final load verification. This verification, using a test verified model, is required by NASA to fly the Galileo Spacecraft on the Shuttle/Centaur launch vehicle in 1986.

Trubert, M.↗

Center of mass estimation in closed vortices - A verification in principle and practice

The problem of tracking closed mesoscale vortices using center of mass estimation techniques is studied. Three estimators are evaluated using data from a warm core Gulf Stream ring. The comparisons show that a method based on the intersection of perpendicular bisectors and one using a least-squares fit of a conic section perform comparably. The perpendicular bisector algorithm is used in conjunction with a Gaussian ring model and a star-shaped survey pattern to produce an expected error curve as a function of vortex translation, survey speed and vortex size. For typical ring parameters, center estimation is usually possible to within + or - 5 km. The feasibility of using differing data sets to construct a history of ring motion based on a coordinate system moving with the ring is also investigated. In this way, the validity of using satellite-derived data and drifter trajectories to estimate the center of mass of a mesoscale feature is assessed. The results of the analysis demonstrate that the location of the deeper structure of the ring and the surface expression are sufficiently well correlated to permit dynamically relevant calculations based on surface measurements. It is shown that satellite-derived data can be used to approximate the center of mass trajectory to within the error in the individual center estimates for the period analyzed. The Lagrangian-drifter-derived centers are offset from the center of mass trajectory in a manner consistent with kinematic arguments.

Hooker, S. B.↗

Radial growth of an extended spoke in Saturn's B ring

An analysis is reported of the pattern of radial growth of an extended spoke observed in the Voyager 2 low-resolution Saturn ring 'movie'. The feature is atypical in that it orbits Saturn at the corotational rate for 1-1/2 hours after the onset of its formation and then undergoes a 40-min acceleration to sustained Keplerian velocities. A correlation between the dynamical phases and the radial growth modes of the spoke is observed, one that seems consistent with the plasma cloud model of spoke formation and evolution proposed by Goertz and Morfill (1983), taken in the limit of high charge density.

Eplee, R. E., Jr.↗

Coolant passage heat transfer with rotation, a progress report

The objective of this 36-month experimental and analytical program is to develop a heat transfer and pressure drop database, computational fluid dynamic techniques, and correlations for multipass rotating coolant passages with and without flow turbulators. The experimental effort will be focused on the simulation of configurations and conditions expected in the blades of advanced aircraft high pressure turbines so that the effects of Coriolis and buoyancy forces on the coolant side flow can be rationally included in the design of turbine blades.

Kopper, F. C.↗

Coolant passage heat transfer with rotation

The objective is to develop a heat transfer and pressure drop data base, computational fluid dynamic techniques, and correlations for multi-pass rotating coolant passages with and without flow turbulators. The experimental effort is focused on the simulation of configurations and conditions expected in the blades of advanced aircraft high pressure turbines. With the use of this data base, the effects of Coriolis and buoyancy forces on the coolant side flow can be included in the design of turbine blades.

Hajek, T. J.↗

Coolant passage heat transfer with rotation

In current and advanced gas turbine engines, increased speeds, pressures and temperatures are used to reduce specific fuel consumption and increase thrust/weight ratios. Hence, the turbine airfoils are subjected to increased heat loads escalating the cooling requirements to satisfy life goals. The efficient use of cooling air requires that the details of local geometry and flow conditions be adequately modeled to predict local heat loads and the corresponding heat transfer coefficients. The objective of this program is to develop a heat transfer and pressure drop data base, computational fluid dynamic techniques and correlations for multi-pass rotating coolant passages with and without flow turbulators. The experimental effort is focused on the simulation of configurations and conditions expected in the blades of advanced aircraft high pressure turbines. With the use of this data base, the effects of Coriolis and buoyancy forces on the coolant side flow can be included in the design of turbine blades.

Hajek, T. J.↗