Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electronic Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

In situ characterization of the formation of a mixed conducting phase on the surface of yttria-stabilized zirconia near Pt electrodes

The electrochemical reactions of solid oxide fuel cells occur in the region where gas-phase species, electrode, and electrolyte coincide. When the electrode is an ionic insulator and the electrolyte is an electronic insulator, this triple phase boundary is assumed to have atomic dimensions. For this study, we use photoemission electron microscopy to show that the reduced surface of the electrolyte yttria-stabilized zirconia (YSZ) has a sharp electronic metal-insulator boundary near Pt negative electrodes. The electronic conductivity of the reduced YSZ allows for oxygen reduction, allowing the reduced YSZ to behave as an extended triple phase boundary. This extended triple phase boundary can be many microns in size, depending on oxygen pressure, temperature, applied voltage, and time.

30 DIRECT ENERGY CONVERSION↗

Electrochemical performance and stability of SrTi 0.3 Fe 0.6 Co 0.1 O 3-δ infiltrated La 0.8 Sr 0.2 MnO 3 Zr 0.92 Y 0.16 O 2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells

We report that the La 0.8 Sr 0.2 MnO 3 -Zr 0.92 Y 0.16 O 2-δ (LSM-YSZ) composite is the most widely used oxygen electrode for solid oxide electrochemical cells (SOCs). However, operating temperatures > 700 degrees C are required for good performance since oxygen reactions are limitied to three-phase boundaries (TPBs) because of poor ionic conductivity of LSM. Furthermore, LSM-YSZ electrodes typically delaminate during electrolysis operation leading to cell degradation. One strategy to improve SOCs with LSM-YSZ electrodes is to infiltrate a mixed ionically and electronically conducting (MIEC) material that promotes oxygen exchange. However, infiltrated materials have a nano-scale structure that may not be stable under SOC operating temperatures. Here, we report results on the infiltration of SrTi 0.3 Fe 0.6 Co 0.1 O 3-δ (STFC), a recently reported high performance MIEC, into LSM-YSZ to improve its electrochemical performance and stability at intermediate temperatures. The infiltrated STFC enhances LSM-YSZ and cell performance, typically yielding a decrease in electrode polarization resistance by a factor > 3 times, resulting in an increase in fuel cell maximum power density and electrolysis current density (at 1.3 V) by a factor > 2 times. Perhaps more significantly, the infiltrated electrodes show good performance stability, with suppression of electrode delamination during electrolysis and no evidence of coarsening or segregation induced degradation.

36 MATERIALS SCIENCE↗

Oxidative decomposition mechanisms of lithium peroxide clusters: an Ab Initio study

Oxidative decomposition of solid lithium peroxide is an important part of the charging process in a Li-O 2 battery. Here, we investigate oxidative decomposition mechanisms of lithium peroxide clusters as molecular models for solid lithium peroxide using density functional methods to understand charging processes in advanced energy storage systems. Most calculations are done using a (Li 2 O 2 ) 4 cluster with similar results obtained from a larger (Li 2 O 2 ) 16 cluster. Reaction pathways of the clusters involving different sequences of oxidation, oxygen evolution, lithium cation removal, and spin excitation are investigated. The computations suggest that certain oxidative decomposition routes may not have dependence on the oxygen evolution or Li-ion removal kinetics due to the exothermicity of oxygen removal and Li + removal (by solvent) upon oxidation. The computed charge potentials evaluated using a tetramer model indicates that it is possible to have low overcharge potential provided there exists a good electronic conductivity to facilitate the oxidative decomposition. Finally, oxidation potentials of a series of Li x O y clusters are investigated to assess their dependence on stoichiometry and how the local site from which the electrons are being removed affects the charge potentials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ion intercalation engineering of electronic properties of two-dimensional crystals of 2H-TaSe 2

Ion intercalation was recently used to explore two-dimensional (2D) transition metal dichalcogenides (TMDs) with precise tuning of ion concentration in a field-effect-transistor configuration. However, how to systematically change the properties of 2D TMDs, e.g., superconductivity and charge density waves, by ion intercalation has not been explored. As such, we report in this paper results of electrical transport measurements on 2D crystals of 2H-TaSe 2 intercalated with Li ions that is tuned continuously by ionic gating. Shubnikov–de Haas magnetoconductance oscillation and Hall coefficient measurements on crystals of 2H-TaSe 2 revealed an ion intercalation induced multi- to single-band change in the Fermi surface (FS) topology, deep in the charge density wave phase, resulting in a reduction of the number of independent channels for electronic conduction. A remarkable crossover from weak antilocalization to weak localization tuned by gate voltage or temperature was found and attributed to the ion intercalation induced variations in the spin-orbital coupling and electron-phonon interaction. These observations provide new insight into the enhancement of superconductivity and the suppression of charge density waves in 2D 2H-TaSe 2 induced by ion intercalation and demonstrate furthermore the great potential of ion intercalation for engineering electronic properties of 2D TMDs.

36 MATERIALS SCIENCE↗

Influence of a platinum functional layer on a Ni-Ce{sub 0.9}Gd{sub 0.1}O{sub 1.95} anode for thin-film solid oxide fuel cells

A Pt functional layer was deposited between a Ni-Ce{sub 0.9}Gd{sub 0.1}O{sub 1.95} (50 wt. % Ni) anode and an 8 mol. % yttria-stabilized zirconia electrolyte in order to enhance the performance of a thin film solid oxide fuel cell. By inserting this ultrathin functional layer, the ohmic impedance of the single cell was significantly reduced, and the maximum power density was increased by a factor of ∼1.55. However, excessive deposition of the Pt functional layer caused ionic conduction pathway blocking between the yttria-stabilized zirconia and Ni-Gd{sub 0.1}Ce{sub 0.9}O{sub 1.95} (Ni-GDC), deactivating the Ni-GDC as a mixed ionic and electronic conducting anode. As a result, both the ohmic impedance and anodic faradaic impedance were increased after introduction of excessive Pt functional layer, and the maximum power density was also reduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sb 121 , 123 nuclear quadrupole resonance as a microscopic probe in the Te-doped correlated semimetal FeSb 2 : Emergence of electronic Griffith phase, magnetism, and metallic behavior

121,123 Sb nuclear quadrupole resonance (NQR) was applied to Fe(Sb 1-x Te x ) 2 in the low doping regime (x = 0 , 0.01, and 0.05) as a microscopic zero field probe to study the evolution of 3d magnetism and the emergence of metallic behavior. Whereas the NQR spectra itself reflects the degree of local disorder via the width of the individual NQR lines, the spin lattice relaxation rate (SLRR) 1/T 1 (T) probes the fluctuations at the Sb site. The fluctuations originate either from conduction electrons or from magnetic moments. In contrast to the semimetal FeSb 2 with a clear signature of the charge and spin gap formation in 1/T 1 (T)T[~exp/(Δk B T)] , the 1% Te-doped system exhibits almost metallic conductivity and the SLRR nicely confirms that the gap is almost filled. A weak divergence of the SLRR coefficient 1/T 1 (T)T ~ T -n ~ T -0.2 points towards the presence of electronic correlations towards low temperatures. This is supported by the electronic specific heat coefficient γ = (C el /T) showing a power-law divergence γ (T) ~ T -m ~ (1/T 1 T) 1/2 ~ T -n/2 ~ C el /T which is expected in the renormalized Landau Fermi liquid theory for correlated electrons. In contrast to that the 5% Te-doped sample exhibits a much larger divergence in the SLRR coefficient showing 1/T 1 (T)T ~ T -0.72 . According to the specific heat divergence a power law with n = 2 m = 0.56 is expected for the SLRR. This dissimilarity originates from admixed critical magnetic fluctuations in the vicinity of antiferromagnetic long range order with 1/T 1 (T)T ~ T -3/4 behavior. Furthermore Te-doped FeSb 2 as a disordered paramagnetic metal might be a platform for the electronic Griffith phase scenario. NQR evidences a substantial asymmetric broadening of the 121,123 Sb NQR spectrum for the 5% sample. Lastly, this has a predominant electronic origin in agreement with the electronic Griffith phase and stems probably from an enhanced Sb-Te bond polarization and electronic density shift towards the Te atom inside Sb-Te dumbbell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical Random-Access Memory: Progress, Perspectives, and Opportunities

Non-von Neumann computing using neuromorphic systems based on analogue synaptic and neuronal elements has emerged as a potential solution to tackle the growing need for more efficient data processing, but progress toward practical systems has been stymied due to a lack of materials and devices with the appropriate attributes. Recently, solid state electrochemical ion-insertion, also known as electrochemical random access memory (ECRAM) has emerged as a promising approach to realize the needed device characteristics. ECRAM is a three terminal device that operates by tuning electronic conductance in functional materials through solid-state electrochemical redox reactions. This mechanism can be considered as a gate-controlled bulk modulation of dopants and/or phases in the channel. Early work demonstrating that ECRAM can achieve nearly ideal analogue synaptic characteristics has sparked tremendous interest in this approach. More recently, the realization that electrochemical ion insertion can be used to tune the electronic properties of many types of materials including transition metal oxides, layered two-dimensional materials, organic and coordination polymers, and that the changes in conductance can span orders of magnitude has further attracted interest in ECRAM as the basis for analogue synaptic elements for inference accelerators as well as for dynamical devices that can emulate a wide range of neuronal characteristics for implementation in analogue spiking neural networks. At its core, ECRAM shares many fundamental aspects with rechargeable batteries, where ion insertion materials are used extensively for their ability to reversibly store charge and energy. Computing applications, however, present drastically different requirements: systems will require many millions of devices, scaled down to tens of nanometers, all while achieving reliable electronic-state tuning at scaled-up rates and endurances, and with minimal energy dissipation and noise. Further, in this review, we discuss the history, basic concepts, recent progress, as well as the challenges and opportunities for different types of ECRAM, broadly grouped by their primary mobile ionic charge carrier, including Li, protons, and oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Micro- and macro-structural heterogeneities in 316L stainless steel prepared by electron-beam melting

Highlights: • Electron beam melting manufactured parts has a complicated thermal history. • The microstructure varies with the position in the sample. • Pronounced molybdenum segregation at the top disappears at the bottom. • Fast molybdenum diffusion in cell boundaries as well as grain boundaries. - Abstract: This is a study of the micro- and macrostructural variations in samples of stainless steel with the overall composition of the grade 316L, produced using electron beam melting. Electron beam melting is one of the processing methods under consideration for manufacturing some of the International Thermo- Nuclear Experimental Reactor In-Vessel components. Therefore further studies of the homogeneity of the material were conducted. Electron beam melting results in a complicated thermal history of the manufactured part giving a significant impact on the microstructure. A cellular structure that is often observed in samples prepared by selective laser melting was found in the top layers of the specimens. Further down, the structure changed until the cellular structure was almost non-existing, and the grain boundaries had become more pronounced. This revelation of a heterogeneous structure throughout the entire part is crucial for large-scale industrial applications like the Thermo- Nuclear Experimental Reactor to make sure that it is understood that the properties of the material might not be the same at every point, as well as to assure that the correct post-treatment is done. It is also exposed that a significant part of this change is due to molybdenum redistribution inside the sample when it diffuses from the cell boundaries into the cells, and into bigger agglomerates in the grain boundaries. This diffusion seems not to affect the microhardness of the samples.

36 MATERIALS SCIENCE↗

A quantitative figure of merit for battery SEI films and their use as functional solid-state electrolytes

As a key passivation film that governs battery operation, the solid electrolyte interphase (SEI) has long been credited for enabling high-performance batteries or blamed for their eventual death. However, qualitative descriptions of the SEI often found in the literature (e.g., “conductive,” “passivating”) highlight our incomplete understanding of this layer, where even the most basic properties foundational to SEI function remain difficult to measure. Here, we quantify SEI conductivities and SEI transference numbers using a separator-free Cu|SEI|Li architecture that treats the SEI as a functional solid-state electrolyte (SSE). We find that while any SEI property alone (e.g., electronic conductivity) is weakly correlated (R 2 < 0.67) with battery performance (e.g., Coulombic efficiency), a strong correlation (R 2 > 0.99) can be achieved by defining the “SEI cT number” as a product between the SEI transference number (T) and the ratio of SEI conductivities (c). Analogous to the thermoelectric figure of merit (i.e., zT ), SEI cT quantitatively benchmarks the holistic impact of SEI properties on battery performance and underscores the pitfalls of citing such properties in isolation. Perhaps most strikingly, we demonstrate that Li metal deposition and stripping at room temperature is possible in our separator-free Cu|SEI|Li cell, confirming that the SEI can function precisely as an SSE. Together, these results enrich our understanding of the SEI, not just as a passivation layer but as a functional structure that can potentially have important implications for solid-state batteries.

Science & Technology - Other Topics↗

The solid state photomultiplier: Status of photon counting beyond the near-infrared

Rockwell International's Solid State Photomultiplier (SSPM) is an impurity-band avalanche device which can count individual photons with wavelengths between 0.4 and 28 micrometers. Its response to a photon is a pulse of between 10(exp 4) and 10(exp 5) conduction electrons, making it an important device for use in phenomenology. The characteristics of the SSPM make it a potentially important device for use in astronomical applications. Contract NAS2-12400 was initiated in June 1986 to conduct modeling and characterization studies of the SSPM to provide a basis for assessing its use in astronomical systems. Some SSPM models and results of measurements which characterize the group of SSPMs recently fabricated on this contract are discussed.

Hays, K. M.↗

Combined Plasmonic Au-nanoparticle and Conducting Metal Oxide High-temperature Optical Sensing with LSTO

<span style="color: rgba(0, 0, 0, 0.79); font-family: &quot;Source Sans Pro&quot;, source-sans-pro, museo_sans300, museo-sans, Arial, sans-serif; font-size: 16px; background-color: rgb(255, 255, 255);">Fiber optic sensor technology offers several advantages for harsh-environment applications. However, the development of optical gas sensing layers that are stable under harsh environmental conditions is an ongoing research challenge. In this work, electronically conducting metal oxide lanthanum-doped strontium titanate (LSTO) films embedded with gold nanoparticles are examined as a sensing layer for application in reducing gas flows at high temperature (600–800 °C). A strong localized surface plasmon resonance (LSPR) based response to hydrogen is demonstrated in the visible region of the spectrum, while a Drude free electron-based response is observed in the near-IR. Characteristics of these responses are studied both on planar glass substrates and on silica fibers. Charge transfer between the oxide film and the gold nanoparticles is explored as a possible mechanism governing the Au LSPR response and is considered in terms of the corresponding properties of the conducting metal oxide-based matrix phase. Principal component analysis is applied to the combined plasmonic and free-carrier based response over a range of temperatures and hydrogen concentrations. It is demonstrated that the combined visible and near-IR response of these films provides improved versatility for multiwavelength interrogation, as well as improved discrimination of important process parameters (concentration and temperature) through application of multivariate analysis techniques.</span>

Wuenschell, Jeffrey K.↗

Insulator‐to‐Metal Transition and Isotropic Gigantic Magnetoresistance in Layered Magnetic Semiconductors

Magnetotransport, the response of electrical conduction to external magnetic field, acts as an important tool to reveal fundamental concepts behind exotic phenomena and plays a key role in enabling spintronic applications. Magnetotransport is generally sensitive to magnetic field orientations. In contrast, efficient and isotropic modulation of electronic transport, which is useful in technology applications such as omnidirectional sensing, is rarely seen, especially for pristine crystals. Here a strategy is proposed to realize extremely strong modulation of electron conduction by magnetic field which is independent of field direction. GdPS, a layered antiferromagnetic semiconductor with resistivity anisotropies, supports a field-driven insulator-to-metal transition with a paradoxically isotropic gigantic negative magnetoresistance insensitive to magnetic field orientations. This isotropic magnetoresistance originates from the combined effects of a near-zero spin–orbit coupling of Gd 3+ -based half-filling ƒ-electron system and the strong on-site f – d exchange coupling in Gd atoms. These results not only provide a novel material system with extraordinary magnetotransport that offers a missing block for antiferromagnet-based ultrafast and efficient spintronic devices, but also demonstrate the key ingredients for designing magnetic materials with desired transport properties for advanced functionalities.

36 MATERIALS SCIENCE↗

Two‐Dimensional Arrays of Transition Metal Nitride Nanocrystals

Abstract The synthesis of low‐dimensional transition metal nitride (TMN) nanomaterials is developing rapidly, as their fundamental properties, such as high electrical conductivity, lead to many important applications. However, TMN nanostructures synthesized by traditional strategies do not allow for maximum conductivity and accessibility of active sites simultaneously, which is a crucial factor for many applications in plasmonics, energy storage, sensing, and so on. Unique interconnected two‐dimensional (2D) arrays of few‐nanometer TMN nanocrystals not only having electronic conductivity in‐plane, but also allowing transport of ions and electrolyte through the porous nanosheets, which are obtained by topochemical synthesis on the surface of a salt template, are reported. As a demonstration of their application in a lithium–sulfur battery, it is shown that 2D arrays of several nitrides can achieve a high initial capacity of >1000 mAh g −1 at 0.2 C and only about 13% degradation over 1000 cycles at 1 C under a high areal sulfur loading (>5 mg cm −2 ).

Xiao, Xu↗

Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium-Ion Electrode Densities

The use of electrode additives such as binder and conductive additive (CA) in addition to high pore volume for electrolytes, results in reduced volumetric energy densities of all battery electrodes. Here, it is proposed to use poly(furfuryl alcohol) (PFA) conductive resin as a trifunctional electrode additive to replace polyvinylidene fluoride (PVDF) and CA while simultaneously enabling low porosity electrode function. The resultant PFA binder has a long-range ordered structure of conjugated diene, which allow electronic conductivity that leads to a CA-free electrode fabrication process. The oxygen heteroatoms in the PFA structure reduce the diffusion barriers of lithium ions, lowers the amount of required electrolyte/pore volume and thus, increasing electrode density. Serving as a trifunctional electrode additive, a high electrode density of 2.65 g cm -3 of the LiFePO 4 (LFP) electrode and therefore the highest volumetric energy density of 1551 Wh L -1 so far. The LFP electrode using PFA binder can achieve a capacity retention of ≈ 80% and Coulombic efficiency of over 99.9% after cycling for 500 times. The presented in situ polymerization strategy could revolutionize the electrode process, with the advantages of being simple, environmentally friendly, and easily scalable to industrial applications.

25 ENERGY STORAGE↗

Equation-of-motion approach of spin-motive force

We formulate a quantitative theory of an electromotive force of spin origin, i.e., spin-motive force, by the equation-of-motion approach. In a ferromagnetic metal, electrons couple to the local magnetization via the exchange interaction. The electrons are affected by spin dependent forces due to this interaction and the spin-motive force and the anomalous Hall effect appears. We have revealed that the origin of these phenomena is a misalignment between the conduction electron spin and the local magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling a High-Temperature Electrochemically Driven Water-Gas-Shift Process Using a Mixed-Conducting Membrane without External Electrical Power

This paper develops a model to predict and interpret the performance of an elevated-temperature, electrochemical, membrane-assisted, water-gas-shift process. The process uses separated feed streams of H 2 O and CO to produce separated streams of H 2 and CO 2 , without an external electrical power source. The dense ceramic membrane is mixed ionic-electronic-conducting (MIEC) gadolinium-doped ceria (GDC) and the porous composite electrodes are Ni-YSZ. At elevated temperature, GDC conducts both oxygen ions and small polarons. The present process uses chemical potential to drive the process. Electrochemical oxidation of CO proceeds within the composite anode and H 2 O reduction proceeds within the composite cathode. At high temperature (e.g., T > 700 °C), GDC has significant electronic leakage in the form of a reduced-cerium small polaron, which supports the charge-transfer reactions. In a typical electrolyzer or fuel cell, this leakage is significantly problematic. However, the present process depends on the leakage current to complete the electrochemical circuit. Model development and validation is based on measured material properties and reactor performance. Potential applications include using CO-rich blast-furnace off gases in steel processing, producing separated streams of H 2 and CO 2 .

Zhu, Huayang↗