Search NASA⌕ Search

SEARCH · Search NASA

Results for “GARNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

The effect of laser wavelength on emission and particle dynamics of Sn plasma

We investigated the effects of laser wavelength on the atomic, ionic, and radiative emission from laser-produced tin plasmas. For generating plasmas, planar tin targets were excited using either high intensity neodymium-doped yttrium aluminum garnet (Nd:YAG, 1.06 {mu}m) or carbon dioxide (CO{sub 2}, 10.6 {mu}m) laser pulses; both are considered to be potential excitation lasers for an extreme ultraviolet (EUV) lithography laser-produced plasma light source. Various diagnostic tools were utilized for investigating ionic, neutral, and radiative emission from Sn plasmas including Faraday cup, witness plate in conjunction with x-ray photoelectron spectroscopy (XPS), EUV, and visible emission spectroscopy and photography. Atomic and ionic analysis showed that the amount of debris emitted by the Nd:YAG generated plasmas was considerably higher than the CO{sub 2} laser-produced plasmas. The angular distributions of both atomic and ionic debris were found to be more forward-centric for the 1.06 {mu}m generated plasma while being much more uniform for the 10.6 {mu}m heated plasma. EUV and visible emission images of the plasma also showed a forward-centric appearance for 1.06 {mu}m heated plasmas. The strength of excited neutral emission was considerably lower for the case of the 10.6 {mu}m plasma while the kinetic energies of ions debris were found to be much higher for CO{sub 2} generated plasmas. Surface analysis of the craters created by the lasers showed that the mass ablation rate is 3.6 times higher for Nd:YAG laser generated plasmas compared to CO{sub 2} generated plasmas at maximum EUV emission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evidence of inverse bremsstrahlung in laser enhanced laser-induced plasma

Plasmas created by a Nd:yttrium aluminum garnet laser show systematic changes in local electron temperature when bathed by a continuous wave laser of increasing irradiance. By monitoring the local electron density, the laser light absorption coefficient, and the signal to noise ratio in neutral emissions, we explain the changes in electron temperature and signal to noise to be a consequence of inverse bremsstrahlung in this new system of laser enhanced laser-induced plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Upgraded multipulse laser and multipoint Thomson scattering diagnostics on EAST

Recently a new Thomson scattering diagnostic system was upgraded in EAST tokamak experiment using a multipulse Nd:YAG (neodymium--yttrium aluminium garnet) laser and a multipoint observation volumes. This diagnostic uses a new optical laser alignment technique that was made to determine accurately the laser position, and a new lens collection system that enables the measurement of wider plasma's object. A composite control system made we can get the results in several seconds. Furthermore, a new data processing method was adopted for much exact results.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of particle velocity in a laser-produced tin plasma extreme ultraviolet source

In connection with fast heating in a laser produced plasma (LPP) extreme ultraviolet (EUV) source, the superheating behavior of bulk tin (Sn) at high heating rates is investigated. A constant temperature and pressure molecular dynamics simulation using modified Lennard-Jones and Coulomb potentials suitable for studying the liquid structure of Sn is employed in order to derive the caloric curves of the solid and liquid phases. The results have shown transient effects on the phase transitions. Superheating is observed during the melting and vaporizing processes. The velocity distribution of Sn particles against typical laser fluence in a LPP EUV light source has been numerically investigated using a simplified method including a one-dimensional, two-temperature, molecular dynamics, and steady-state ionization model. In the framework of our model, it was found that ejected Sn particles have a maximum velocity on the order of 10 to 40 km/s in plasma created using a nanosecond pre-pulse neodymium-doped yttrium aluminum garnet (Nd:YAG, 1.06 {mu}m) laser in EUV lithography experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Late-time particle emission from laser-produced graphite plasma

We report a late-time ''fireworks-like'' particle emission from laser-produced graphite plasma during its evolution. Plasmas were produced using graphite targets excited with 1064 nm Nd: yttrium aluminum garnet (YAG) laser in vacuum. The time evolution of graphite plasma was investigated using fast gated imaging and visible emission spectroscopy. The emission dynamics of plasma is rapidly changing with time and the delayed firework-like emission from the graphite target followed a black-body curve. Our studies indicated that such firework-like emission is strongly depended on target material properties and explained due to material spallation caused by overheating the trapped gases through thermal diffusion along the layer structures of graphite.

36 MATERIALS SCIENCE↗

Gas dynamic effects on formation of carbon dimers in laser-produced plasmas

We investigated the effect of helium and nitrogen pressures on the dynamics of molecular species formation during laser ablation of carbon. For producing plasmas, planar carbon targets were irradiated with 1064 nm, 6 ns pulses from an Nd:yttrium aluminum garnet laser. The emission from excited C{sub 2} and CN molecules was studied using space resolved optical time-of-flight emission spectroscopy and spectrally resolved fast imaging. The intensity oscillations in C{sub 2} and CN monochromatic fast imaging and their emission space-time contours suggest that recombination is the major mechanism of C{sub 2} formation within the laser ablation carbon plumes in the presence of ambient gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancements of extreme ultraviolet emission using prepulsed Sn laser-produced plasmas for advanced lithography applications

Laser-produced plasmas (LPP) from Sn targets are seriously considered to be the light source for extreme ultraviolet (EUV) next generation lithography, and optimization of such a source will lead to improved efficiency and reduced cost of ownership of the entire lithography system. We investigated the role of reheating a prepulsed plasma and its effect on EUV conversion efficiency (CE). A 6 ns, 1.06 {mu}m Nd:yttrium aluminum garnet laser was used to generate the initial plasma that was then reheated by a 40 ns, 10.6 {mu}m CO{sub 2} laser to generate enhanced EUV emission from a planar Sn target. The effects of prepulsed laser intensity and delay timings between the prepulsed and the pumping pulse were investigated to find the optimal pre-plasma conditions before the pumping pulse. The initial optimization of these parameters resulted in 25% increase in CE from the tin LPP. The cause of increased EUV emission was identified from EUV emission spectra and ion signal data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of polarization-controlled multi-pass Thomson scattering system in the GAMMA 10 tandem mirror

In the GAMMA 10 tandem mirror, the typical electron density is comparable to that of the peripheral plasma of torus-type fusion devices. Therefore, an effective method to increase Thomson scattering (TS) signals is required in order to improve signal quality. In GAMMA 10, the yttrium-aluminum-garnet (YAG)-TS system comprises a laser, incident optics, light collection optics, signal detection electronics, and a data recording system. We have been developing a multi-pass TS method for a polarization-based system based on the GAMMA 10 YAG TS. To evaluate the effectiveness of the polarization-based configuration, the multi-pass system was installed in the GAMMA 10 YAG-TS system, which is capable of double-pass scattering. We carried out a Rayleigh scattering experiment and applied this double-pass scattering system to the GAMMA 10 plasma. The integrated scattering signal was made about twice as large by the double-pass system.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Regenerative Feedback Resonant Circuit to Detect Transient Changes in Electromagnetic Properties of Semi-Insulating Materials

A prototype regenerative feedback resonant circuit has been developed for measuring the transient spectral response due to perturbations in properties of various electromagnetic materials. The circuit can accommodate a variety of cavity resonators, shown here in the 8 GHz range, with passive quality factors (Qstat) as high as 7,000 depending upon material loading. The positive feedback enhanced dynamic quality factors (Qdyn) of resonator/material combinations in the regenerative circuit are on the order of 107 - 108. The theory, design, and implementation of the circuit is discussed along with real-time monitored example measurements of effects due to photon-induced charge carriers in high-resistivity silicon wafers and magnetic-field induced perturbations of yttrium-iron garnet.

cavity perturbation↗

Heavy mineral distribution in stream sediment of Tapah area, Perak, Malaysia

This paper aims to provide the overview of occurrence, distribution and origin of the heavy minerals in the study area. A total of 45 selected stream sediment heavy mineral concentrate samples were panned using standard dulangs, dried and separated from other light minerals using bromoform. The heavy minerals were separated into different fractions at different amperes using Frantz Isodynamic magnetic separator. Mineral identification was done using binocular microscope augmented by X-ray diffraction analyses. Mineral abundance data were analysed graphically using triangular diagrams to show their origin. Dominant minerals present in the heavy mineral samples collected are ilmenite, cassiterite, tourmaline, zircon, topaz, and magnetite. The less common minerals, present in trace amounts are hematite, xenotime, allanite, monazite, rutile, anatase, leucoxene, chromite, garnet and olivine. Examination of the heavy mineral assemblage shows that they originated from granite batholiths of the Main Range, Changkat Rembian as well as from the metasedimentary rock in the area. The gold flakes present are found together with cassiterite and topaz indicating that gold originates from the mineralized veins contact-metamorphosed metasedimentary rocks. Almost all samples collected contain cassiterite grains in various amounts. From the mineral assemblage, the source of cassiterite originates from the mineralized quartz veins that cut granitic rocks of Main Range, Changkat Rembian as well as the metasedimentary rock in the area. Greisenized veins containing quartz, mica and tourmaline with the presence of wolframite and arsenopyrite also contribute to the presence of cassiterite in this study area.

36 MATERIALS SCIENCE↗

Fabrication of functional nanomaterials using flame assisted spray pyrolysis

Flame assisted spray pyrolysis (FASP) is a class of synthesis method for nanomaterials fabrication. The ability to control nanomaterials characteristics and easy to be-scaled up are the main features of FASP. The crystallinity and particles size of the prepared nanomaterials can be easily controlled by variation of fuel flow rate. The precursor concentration, carrier gas flow rate, and carrier gas can be also used to control the prepared nanomaterials. Energy related nanomaterials preparation uses as the example case in FASP application. These material are yttrium aluminum garnet (YAG:Ce) and tungsten oxide (WO{sub 3}). It needs strategies to produce these materials into nano-sized order. YAG:Ce nanoparticles only can be synthesized by FASP using the urea addition. The decomposition of urea under high temperature of flame promotes the breakage of YAG:Ce particles into nanoparticles. In the preparation of WO{sub 3}, the high temperature flame can be used to gasify WO{sub 3} solid material. As a result, WO{sub 3} nanoparticles can be prepared easily. Generally, to produce nanoparticles via FASP method, the boiling point of the material is important to determine the strategy which will be used.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alloying and oxidation of in situ produced core-shell Al@Yb nanoalloy particles—An “on-the-fly” study

Core-shell-structured nanoalloy particles with an Al-dominated interior covered by few Yb monolayers have been fabricated using a vapor-aggregation method involving magnetron sputtering. The radially segregated structure of the Yb-Al nanoparticles has been disclosed by “on-the-fly” photoelectron spectroscopy monitoring of the nanoparticle beam in Yb 4f and Al 2p electron binding energy regions. Both, the binding energy values and the electron microscopy images taken on the deposited nanoparticles, allow estimating their dimensions to be in the 5–10 nm range. The photoelectron spectroscopy results suggest that in these nanoparticles no trivalent Yb – the typical case for the macroscopic Yb-Al alloy – is present. The oxidation of preformed Yb-Al nanoparticles was successfully attempted, leading to the appearance of divalent Yb surface oxide – in contrast to the bulk macroscopic Yb which is trivalent in the oxide. Our results suggest that at intermediate oxygen exposures “sandwich-like” nanoparticles of YbO/Yb/Al were synthesized. At higher O{sub 2} exposures, the oxygen seems to penetrate all the way to the Yb-Al interface. The results of the present study have to be considered when photonic applications of Yb-doped garnet nanoparticles are planned.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion synthesis and thermoluminescence in YAlO{sub 3}:Dy{sup 3+}

In the Y{sub 2}O{sub 3}-Al{sub 2}O{sub 3} system, compounds Y{sub 3}Al{sub 5}O{sub 12} (yttrium aluminum garnet, YAG),YAlO{sub 3} (yttrium aluminum perovskite, YAP), and Y{sub 4}Al{sub 2}O{sub 9}(yttrium aluminate monoclinic, YAM) are well known. Though several soft chemical routes have been explored for synthesis of YAG, YAP and YAM, most of these methods are complex. Moreover, phase pure materials are not obtained in one step and prolonged annealing at temperatures around 1000°C is necessary. In this paper, one step combustion synthesis of the compound YAlO{sub 3}:Dy{sup 3+} is reported using a modified procedure and employing mixed (glycine + urea) fuel. Powder X-ray diffraction patterns confirm the pervoskite phase of YAlO{sub 3}. Thermoluminescence study shows linear response in wide dose range (0.2 – 1 KGy) suggest the possibility of the present phosphor in dosimeter application.

36 MATERIALS SCIENCE↗

Tuning the magnetoresistance symmetry of Pt on magnetic insulators with temperature and magnetic doping

We present a comparison study of the temperature dependence of the intriguing magnetoresistance (MR) in Pt/YIG (yttrium iron garnet), Pt/YIG BB (the YIG substrate has been bombarded with Ar + ), and Pt/SiO 2 (with different Fe doping levels). With decreasing temperature, the MRs in Pt/YIG and Pt/YIG BB change symmetry from R z = R x > R y at room temperature to R x > R z > R y at low temperature. A similar behavior in both Pt/YIG and Pt/YIG BB implies that the underlying physics is due to magnetic scattering, instead of the pure spin current across the interface. By changing the Fe doping level in the SiO 2 substrate, we can further systematically modulate the symmetry of MR in Pt/SiO 2 (Fe doped). The doping level dependent symmetry can also qualitatively explain the controversy over the MRs of Pt/YIG and similar structures at low temperature.

36 MATERIALS SCIENCE↗

Approaching quantum anomalous Hall effect in proximity-coupled YIG/graphene/h-BN sandwich structure

Quantum anomalous Hall state is expected to emerge in Dirac electron systems such as graphene under both sufficiently strong exchange and spin-orbit interactions. In pristine graphene, neither interaction exists; however, both interactions can be acquired by coupling graphene to a magnetic insulator as revealed by the anomalous Hall effect. Here, we show enhanced magnetic proximity coupling by sandwiching graphene between a ferrimagnetic insulator yttrium iron garnet (YIG) and hexagonal-boron nitride (h-BN) which also serves as a top gate dielectric. By sweeping the top-gate voltage, we observe Fermi level-dependent anomalous Hall conductance. As the Dirac point is approached from both electron and hole sides, the anomalous Hall conductance reaches ¼ of the quantum anomalous Hall conductance 2e 2 /h. The exchange coupling strength is determined to be as high as 27 meV from the transition temperature of the induced magnetic phase. YIG/graphene/h-BN is an excellent heterostructure for demonstrating proximity-induced interactions in two-dimensional electron systems.

36 MATERIALS SCIENCE↗

Effects of an adjacent metal surface on spin wave propagation

We experimentally investigate and model the effects of a copper surface adjacent to a surface on which spin waves propagate in a thin film of yttrium iron garnet (YIG). Investigation was performed using a phase detection method, which can map out the spin wave velocity as a function wavevector for small wavevector with high resolution. This velocity is in good agreement with a simple model and allows for extraction of the separation between the YIG film and the copper.

36 MATERIALS SCIENCE↗

Variable location channels to improve efficiency and precision for direct ∇ T e measurements and high spatial resolution T e -profile measurements using electron cyclotron emission

Electron cyclotron emission (ECE) diagnostics that use variable location channels based on yttrium iron garnet (YIG) bandpass filters improve the precision and the efficiency of measurements of electron temperature (T e ) profiles and fluctuations (δT e ). These variable frequency filters were substituted for fixed frequency filters in the intermediate frequency section to achieve the required higher resolution over a target radial range, just before the experiment. In this paper, we present the proof-of-principle for high temporal resolution measurement of the electron temperature gradient, via real-time slewing of a YIG filter for relocation of an ECE channel during a long pulse. The key component is the application of YIG tunable filters with their narrow bandwidth and capability for a high slew rate of their center frequency. This application permits fast relocation of the ECE channels for direct measurement of the gradient and close spacing of channels to investigate the magnetic island’s dynamic behavior.

47 OTHER INSTRUMENTATION↗

Upgrade of the ECE diagnostic on EAST

The electron cyclotron emission (ECE) diagnostic on the experimental advanced superconducting tokamak (EAST) was upgraded recently to provide electron temperature profile measurement with wider radial coverage and better precision. Here, the lower limit of the ECE detection frequency band was extended from 104 GHz to 97 GHz by adding a new 8-channel heterodyne radiometer, which ensures capability for the measurement of the second harmonic ECE with toroidal magnetic field down to 1.75 T. Also, the existing 32-channel heterodyne radiometer has been upgraded, with the frequency interval for the lower frequency range up to 120 GHz reduced from 2 GHz to 1 GHz by introducing eight channels in the intermediate frequency part. In addition, a plan is presented to incorporate tunable yttrium iron garnet filters into the existing heterodyne radiometer to obtain detailed measurements of the electron temperature gradient scale length as well as finer spatial pinpointing of magnetohydrodynamic modes. Examples from DIII-D are provided where similar ECE diagnostic allowed precise measurement of the center and width of neoclassical tearing modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗