Search NASA⌕ Search

SEARCH · Search NASA

Results for “Homogeneous flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Filtering, averaging, and scale dependency in homogeneous variable density turbulence

We investigate relationships between statistics obtained from filtering and from ensemble or Reynolds-averaging turbulence flow fields as a function of length scale. Generalized central moments in the filtering approach are expressed as inner products of generalized fluctuating quantities, q ' ( ξ , x ) = q ( ξ ) - q ¯ ( x ) , representing fluctuations of a field q ( ξ ) , at any point ξ, with respect to its filtered value at x. For positive-definite filter kernels, these expressions provide a scale-resolving framework, with statistics and realizability conditions at any length scale. In the small-scale limit, scale-resolving statistics become zero. In the large-scale limit, scale-resolving statistics and realizability conditions are the same as in the Reynolds-averaged description. Using direct numerical simulations (DNS) of homogeneous variable density turbulence, we diagnose Reynolds stresses, T i j , resolved kinetic energy, kr, turbulent mass-flux velocity, a i , and density-specific volume covariance, b, defined in the scale-resolving framework. These variables, and terms in their governing equations, vary smoothly between zero and their Reynolds-averaged definitions at the small and large scale limits, respectively. At intermediate scales, the governing equations exhibit interactions between terms that are not active in the Reynolds-averaged limit. For example, in the Reynolds-averaged limit, b follows a decaying process driven by a destruction term; at intermediate length scales, it is a balance between production, redistribution, destruction, and transport, where b grows as the density spectrum develops and then decays when mixing becomes strong enough. This work supports the notion of a generalized, length-scale adaptive model that converges to DNS at high resolutions and to Reynolds-averaged statistics at coarse resolutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Boundary layer integral matrix procedure: Verification of models

The three turbulent models currently available in the JANNAF version of the Aerotherm Boundary Layer Integral Matrix Procedure (BLIMP-J) code were studied. The BLIMP-J program is the standard prediction method for boundary layer effects in liquid rocket engine thrust chambers. Experimental data from flow fields with large edge-to-wall temperature ratios are compared to the predictions of the three turbulence models contained in BLIMP-J. In addition, test conditions necessary to generate additional data on a flat plate or in a nozzle are given. It is concluded that the Cebeci-Smith turbulence model be the recommended model for the prediction of boundary layer effects in liquid rocket engines. In addition, the effects of homogeneous chemical reaction kinetics were examined for a hydrogen/oxygen system. Results show that for most flows, kinetics are probably only significant for stoichiometric mixture ratios.

Bonnett, W. S.↗

Massively parallel direct numerical simulations of forced compressible turbulence: a hybrid MPI/OpenMP approach. In:XSEDE '12 Proceedings of the 1st Conference of the Extreme Science and Engineering Discovery Environment: Bridging from the eXtreme to the campus and beyond, Article No. 23

A highly scalable simulation code for turbulent flows which solves the fully compressible Navier-Stokes equations is presented. The code, which supports one, two and three dimensional domain decompositions is shown to scale well on up to 262,144 cores. Introducing multiple levels of parallelism based on distributed message passing and shared-memory paradigms results in a reduction of up to 33% of communication time at large core counts. The code has been used to generate a large database of homogeneous isotropic turbulence in a stationary state created by forcing the largest scales in the flow. The scaling of spectra of velocity and density fluctuations are presented. While the former follow classical theories strictly valid for incompressible flows, the latter presents a more complicated behavior. Fluctuations in velocity gradients and derived quantities exhibit extreme though rare fluctuations, a phenomenon known as intermittency. The simulations presented provide data to disentangle Reynolds and Mach number effects.

Jagannathan, Shriram↗

STATIONARITY IN SOLAR WIND FLOWS

By using single-point measurements in space physics it is possible to study a phenomenon only as a function of time. This means that we cannot have direct access to information about spatial variations of a measured quantity. However, the investigation of the properties of turbulence and of related phenomena in the solar wind widely makes use of an approximation frequently adopted in hydrodynamics under certain conditions, the so-called Taylor hypothesis; indeed, the solar wind flow has a bulk velocity along the radial direction which is much higher than the velocity of a single turbulent eddy embedded in the main flow. This implies that the time of evolution of the turbulent features is longer than the transit time of the flow through the spacecraft position, so that the turbulent field can be considered frozen into the solar wind flow. This assumption allows one to easily associate time variations with spatial variations and stationarity to homogeneity. We have investigated, applying criteria for weak stationarity to Ulysses magnetic field data in different solar wind regimes, at which timescale and under which conditions the hypothesis of stationarity, and then of homogeneity, of turbulence in the solar wind is well justified. We extend the conclusions of previous studies by Matthaeus and Goldstein to different parameter ranges in the solar wind. We conclude that the stationarity assumption in the inertial range of turbulence on timescales of 10 minutes to 1 day is reasonably satisfied in fast and uniform solar wind flows, but that in mixed, interacting fast, and slow solar wind streams the assumption is frequently only marginally valid.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of Gravity on Blood Volume and Flow Distribution

In our previous experiments during NASA Shuttle flights SLS 1 and 2 (9-15 days) and EUROMIR flights (30-90 days) we observed that pulmonary blood flow (cardiac output) was elevated initially, and surprisingly remained elevated for the duration of the flights. Stroke volume increased initially and then decreased, but was still above 1 Gz values. As venous return was constant, the changes in SV were secondary to modulation of heart rate. Mean blood pressure was at or slightly below 1 Gz levels in space, indicating a decrease in total peripheral resistance. It has been suggested that plasma volume is reduced in space, however cardiac output/venous return do not return to 1 Gz levels over the duration of flight. In spite of the increased cardiac output, central venous pressure was not elevated in space. These data suggest that there is a change in the basic relationship between cardiac output and central venous pressure, a persistent "hyperperfusion" and a re-distribution of blood flow and volume during space flight. Increased pulmonary blood flow has been reported to increase diffusing capacity in space, presumably due to the improved homogeneity of ventilation and perfusion. Other studies have suggested that ventilation may be independent of gravity, and perfusion may not be gravity- dependent. No data for the distribution of pulmonary blood volume were available for flight or simulated microgravity. Recent studies have suggested that the pulmonary vascular tree is influenced by sympathetic tone in a manner similar to that of the systemic system. This implies that the pulmonary circulation is dilated during microgravity and that the distribution of blood flow and volume may be influenced more by vascular control than by gravity. The cerebral circulation is influenced by sympathetic tone similarly to that of the systemic and pulmonary circulations; however its effects are modulated by cerebral autoregulation. Thus it is difficult to predict if cerebral perfusion is increased and if there is edema in space. Anecdotal evidence suggests there may be cerebral edema early in flight. Cerebral artery velocity has been shown to be elevated in simulated microgravity. The elevated cerebral artery velocity during simulated microgravity may reflect vasoconstriction of the arteries and not increased cerebral blood flow. The purpose of our investigations was to evaluate the effects of alterations in simulated gravity (+/-), resulting in changes in cardiac output (+/-), and on the blood flow and volume distribution in the lung and brain of human subjects. The first hypothesis of these studies was that blood flow and volume would be affected by gravity, but their distribution in the lung would be independent of gravity and due to vasoactivity changing vascular resistance in lung vessels. The vasodilitation of the lung vasculature (lower resistance) along with increased "compliance" of the heart could account for the absence of increased central venous pressure in microgravity. Secondly, we postulate that cerebral blood velocity is increased in microgravity due to large artery vasoconstriction, but that cerebral blood flow would be reduced due to autoregulation.

Pendergast, D.↗

Fabrication of gradient porous LSM cathode by optimizing deposition parameters in ultrasonic spray pyrolysis

Multiple-step ultrasonic spray pyrolysis was developed to produce a gradient porous lanthanum strontium manganite (LSM) cathode on yttria-stabilized zirconia (YSZ) electrolyte for use in intermediate temperature solid oxide fuel cells (IT-SOFCs). The effect of solvent and precursor type on the morphology and compositional homogeneity of the LSM film was first identified. The LSM film prepared from organo-metallic precursor and organic solvent showed a homogeneous crack-free microstructure before and after heat treatment as opposed to aqueous solution. With respect to the effect of processing parameters, increasing the temperature and solution flow rate in the specific range of 520–580 °C leads to change the microstructure from a dense to a highly porous structure. Using a dilute organic solution a nanocrystalline thin layer was first deposited at 520 °C and solution flow rate of 0.73 ml/min on YSZ surface; then, three gradient porous layers were sprayed from concentrated solution at higher temperatures (540–580 °C) and solution flow rates (1.13–1.58 ml/min) to form a gradient porous LSM cathode film with 30 μm thickness. The microstructure, phase crystallinity and compositional homogeneity of the fabricated films were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive analysis of X-ray (EDX). Results showed that the spray pyrolized gradient film fabricated in the temperature range of 520–580 °C is composed of highly crystalline LSM phase which can remove the need for subsequent heat treatment.

lanthanum strontium manganite↗

miRNA detection at single-cell resolution using microfluidic LNA flow-FISH

Flow cytometry in combination with fluorescent in situ hybridization (flow-FISH) is a powerful technique that can be utilized to rapidly detect nucleic acids at single-cell resolution without the need for homogenization or nucleic acid extraction. Here, we describe a microfluidic-based method which enables the detection of microRNAs or miRNAs in single intact cells by flow-FISH using locked nucleic acid (LNA)-containing probes. Our method can be applied to all RNA species including mRNA and small noncoding RNA and is suitable for multiplexing with protein immunostaining in the same cell. For demonstration of our method, this chapter details the detection of miR155 and CD69 protein in PMA and ionomycin-stimulated Jurkat cells. Here, we also include instructions on how to set up a microfluidic chip sample preparation station to prepare cells for imaging and analysis on a commercial flow cytometer or a custom-built micro-flow cytometer.

59 BASIC BIOLOGICAL SCIENCES↗

A Proposed Correlation for Critical Flow Rate of Steam/Water Flow

In the safety analysis of loss-of-coolant-accident (LOCA) and steam generator tube rupture (SGTR) scenarios of light water reactors, a modeling of a break is very important to predict the accident's result. For example, the design of a break simulator to simulate a LOCA in light water reactors requires accurate knowledge of the leakage flow through the break, whose shape can be assumed as an orifice or a nozzle according to the characteristics of the break shape. In the case of a small-break LOCA (SBLOCA) scenario, the critical flow mostly occurs by sub-cooled and saturated liquid water including a two-phase water flow at relatively high-pressure conditions. Among previous critical flow maps, Moody's maps are well known for their critical flow rate and pressure of a single component and two-phase mixture with respect to the upstream enthalpy and pressure. In Moody's model, a slip ratio defined by maximizing the critical flow rate with respect to the slip ratio was introduced, and thus its predictions tended to be too conservative. Later, Moody suggested other maps based on a homogeneous equilibrium model (HEM), and they were useful to predict a choked condition for a given upstream condition. However, their predictions of the critical flow rate seemed to show quite an underestimation compared to various test data. The author suggested more practicable critical flow maps for a critical mass flux and pressure of a steam-water flow with respect to the upstream stagnation conditions using an extended Henry-Fauske model. From a comparison with the selected test data, suggested maps showed conservative predictions within reasonable ranges. In this report, a new correlation for the critical flow rate was developed to simulate the suggested critical flow maps within a reasonable range of error. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Influence of Homogenization on the Mechanical Properties and Microstructure of the U-10Mo Alloy

In Phase 1 of this study, the mechanical properties of as-cast, depleted uranium alloyed with 10 weight percent molybdenum alloy (U-10Mo) samples were evaluated by high-temperature compression testing. Compression testing was conducted at three strain rates over a temperature range of 400 to 800°C. The results indicated that with increasing test temperature, the material flow stress decreases and the material becomes more sensitive to strain rate. In addition, above the eutectoid transformation temperature (~ 550°C), the drop in material flow stress is prominent and shows a strain-softening behavior, especially at lower strain rates. In the second part of this research, we studied the effect that homogenization heat treatment had on the high temperature mechanical properties and microstructure of the cast U-10Mo alloy. Various homogenization times and temperatures were studied ranging between 800 and 1000°C for 4 to 48 hours. Based on the microstructural response in this homogenization study, a heat treatment cycle of 800°C for 24 hours and another at 1000°C for 16 hours were selected as the times at temperature to achieve a fully homogenized sample. Samples from these conditions were then compression tested at a variety of temperatures ranging from 500 to 800°C. The microstructure of these samples were compared to the as-cast samples and to a baseline sample homogenized at 1000°C for 16 hours. The results indicate that below the eutectoid temperature (~ 550°C) all three samples showed strain hardening and followed similar trends. Above the eutectoid temperature, the yield strength of the material decreased linearly. For the as-cast sample and the sample homogenized at 800°C for 24 hours, the n-values were negative, whereas for the samples homogenized at 1000°C for 16 hours the material exhibited a perfectly plastic behavior. The as-cast sample, heat treated at 800°C for 24 hours, showed significant lamellar structure transformation that seems to have precipitated along the grain boundaries in the molybdenum-lean regions. In similar samples, homogenized at 800°C for 24 hours and tested at 650°C, the backscattered-electron scanning electron microscopy images revealed a composite structure of lamellar phase and nano-scale molybdenum-rich and -lean phases along the grain boundaries. These phases may have been responsible for the lowering of the flow stress in the material observed in the Phase 1 work. For comparison, the samples homogenized at 1000°C for 16 hours showed no such transformations.

36 MATERIALS SCIENCE↗

Time domain numerical calculations of unsteady vortical flows about a flat plate airfoil

A time domain numerical scheme is developed to solve for the unsteady flow about a flat plate airfoil due to imposed upstream, small amplitude, transverse velocity perturbations. The governing equation for the resulting unsteady potential is a homogeneous, constant coefficient, convective wave equation. Accurate solution of the problem requires the development of approximate boundary conditions which correctly model the physics of the unsteady flow in the far field. A uniformly valid far field boundary condition is developed, and numerical results are presented using this condition. The stability of the scheme is discussed, and the stability restriction for the scheme is established as a function of the Mach number. Finally, comparisons are made with the frequency domain calculation by Scott and Atassi, and the relative strengths and weaknesses of each approach are assessed.

Hariharan, S. I.↗

Time domain numerical calculations of unsteady vortical flows about a flat plate airfoil

A time domain numerical scheme is developed to solve for the unsteady flow about a flat plate airfoil due to imposed upstream, small amplitude, transverse velocity perturbations. The governing equation for the resulting unsteady potential is a homogeneous, constant coefficient, convective wave equation. Accurate solution of the problem requires the development of approximate boundary conditions which correctly model the physics of the unsteady flow in the far field. A uniformly valid far field boundary condition is developed, and numerical results are presented using this condition. The stability of the scheme is discussed, and the stability restriction for the scheme is established as a function of the Mach number. Finally, comparisons are made with the frequency domain calculation by Scott and Atassi, and the relative strengths and weaknesses of each approach are assessed.

Hariharan, S. I.↗

Characterization of immiscible fluid displacement processes with various capillary numbers and viscosity ratios in 3D natural sandstone

We characterize the influence of reservoir conditions upon multiphase flow, we calculated fluid displacements (drainage processes) in 3D pore spaces of Berea sandstone using two-phase lattice Boltzmann (LB) simulations. The results of simulations under various conditions were used to classify the resulting two-phase flow behavior into three typical fluid displacement patterns on the diagram of capillary number (Ca) and viscosity ratio of the two fluids (M). In addition, the saturation of the nonwetting phase was calculated and mapped on the Ca–M diagram. We then characterized dynamic pore-filling events (i.e., Haines jumps) from the pressure variation of the nonwetting phase, and linked this behavior to the occurrence of capillary fingering. The results revealed the onset of capillary fingering in 3D natural rock at a higher Ca than in 2D homogeneous granular models, with the crossover region between typical displacement patterns broader than in the homogeneous granular model. Furthermore, saturation of the nonwetting phase mapped on the Ca–M diagram significantly depends on the rock models. These important differences between two-phase flow in 3D natural rock and in 2D homogeneous models could be due to the heterogeneity of pore geometry in the natural rock and differences in pore connectivity. By quantifying two-phase fluid behavior in the target reservoir rock under various conditions (e.g., saturation mapping on the Ca–M diagram), our approach could provide useful information for investigating suitable reservoir conditions for geo-fluid management (e.g., high CO 2 saturation in CO 2 storage).

58 GEOSCIENCES↗

A kinetics study of the homogeneous and heterogeneous components of the HCl + ClONO2 reaction

The kinetics of the reaction HCl + ClONO2 to Cl2 + HNO3 were investigated at 298 K using a flow reactor with FTIR analysis to assess the importance of this reaction for stratospheric chemistry. The observed reaction was characteristic of a heterogeneous process; an upper limit of 5 x 10 to the -18th cu cm/molecule per s was obtained for the homogeneous gas phase rate constant. From calculations of the first order wall rate constant, estimates were made of the reaction rate on stratospheric aerosols. Because both HCl and ClONO2 need to be adsorbed on the particle surface, the reaction will be of negligible importance under most stratospheric conditions.

Friedl, Randall R.↗

BLENDING ANALYSIS FOR RADIOACTIVE SALT WASTE PROCESSING FACILITY

Savannah River National Laboratory (SRNL) evaluated methods to mix and blend the contents of the blend tanks to ensure the contents are properly blended before they are transferred from the blend tank such as Tank 21 and Tank 24 to the Salt Waste Processing Facility (SWPF) feed tank. The tank contents consist of three forms: dissolved salt solution, other waste salt solutions, and sludge containing settled solids. This paper focuses on developing the computational model and estimating the operation time of submersible slurry pump when the tank contents are adequately blended prior to their transfer to the SWPF facility. A three-dimensional computational fluid dynamics approach was taken by using the full scale configuration of SRS Type-IV tank, Tank 21H. Major solid obstructions such as the tank wall boundary, the transfer pump column, and three slurry pump housings including one active and two inactive pumps were included in the mixing performance model. Basic flow pattern results predicted by the computational model were benchmarked against the SRNL test results and literature data. Tank 21 is a waste tank that is used to prepare batches of salt feed for SWPF. The salt feed must be a homogeneous solution satisfying the acceptance criterion of the solids entrainment during transfer operation. The work scope described here consists of two modeling areas. They are the steady state flow pattern calculations before the addition of acid solution for tank blending operation and the transient mixing analysis during miscible liquid blending operation. The transient blending calculations were performed by using the 95% homogeneity criterion for the entire liquid domain of the tank. The initial conditions for the entire modeling domain were based on the steady-state flow pattern results with zero second phase concentration. The performance model was also benchmarked against the SRNL test results and literature data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Simulation of Mesoscale Cellular Convection in Marine Stratocumulus: 2. Nondrizzling Conditions

This is the second of two large-eddy simulation studies on the mechanisms of mesoscale cellular organization in drizzling (open cells) and nondrizzling marine stratocumulus (closed cells). This study uses a hard nudging approach which maintains fixed horizontal-mean temperature and humidity profiles for a well-mixed boundary layer with a constant boundary layer depth. For the case studied, closed cells develop and broaden by 32 hr to an aspect ratio of 25. Simulations show that the closed-cell mesoscale cellular convection is driven by positive feedback from cloud-induced mesoscale perturbations of longwave radiative cooling. A conceptual model for closed-cell stratocumulus as a mesoscale wavelength hydrodynamic instability in which mesoscale moist and dry anomalies spontaneously grow is presented. In simulations in which long-wavelength sinusoidal moisture anomalies are initially imposed, these anomalies evolve into amplifying closed cells. The cell structure is visualized with a compositing approach based on sorting grid columns by their mesoscale-smoothed total water path. A thermally direct mesoscale circulation pattern develops in the interior of the boundary layer with buoyant mesoscale updrafts, thicker cloud, and a slightly higher capping inversion in the moister columns. There is a mesoscale flow of above-inversion air down the slightly sloping capping inversion from the moist to the dry regions, reinforced by cloud top radiative cooling. This strengthens the mesoscale anomalies by preferentially cooling and drying the already dry regions. The sloping inversion flow is not driven as efficiently if the radiative cooling is artificially horizontally homogenized, partly disrupting this positive feedback and the resulting closed-cell development.

54 ENVIRONMENTAL SCIENCES↗

Enhancing cylindrical compression by reducing plasma ablation in pulsed-power drivers

Warm dense matter, which can be found in planetary cores, is too dense to be described by plasma theory and too hot to be considered condensed matter. With no theory describing perfectly how such large quantum systems evolve at macroscopic scales, modeling planetary evolution is simply out of reach. While recent experiments using high power lasers and heavy ion beams have produced warm dense matter samples, they do not confine matter long enough to allow for bulk material properties to take hold, precluding the validation of any theories beyond electron-ion equilibration time. To this end, pulsed-power drivers are required. This approach allows experimentalists to probe macroscopic states of matter where bulk material properties are at equilibrium. High resolution numerical simulations show that a mega-ampere pulsed-power driver can generate macroscopic samples of warm dense matter, using direct magnetic compression, without any pusher. A thin coating, deposited onto the material just before the experiment, softens the density gradients responsible for plasma ablation. Starved of plasma outside the conductors, electrical currents are forced to flow along material surfaces, resulting in a very stable magnetic topology that yields homogeneous compression above 1 Mbar. Another key aspect is as follows: mega-ampere pulsed power systems are compact enough to be located next to existing high brilliance x-ray sources, which can probe best the properties of matter under extreme pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Semi-Annual Report for Horizontal Compact High Temperature Gas Reactor (HC-HTGR) Development during Performance Period October 2022-March 2023

Horizontal Compact High Temperature Gas Reactor (HC-HTGR) is being designed by a multi-disciplinary team of nuclear, mechanical, and structural engineers under the support of a DOE-NE Advanced Reactor Demonstration Program’s Advanced Reactor Concepts-20 (ARC-20) award. The objective of this ARC-20 project is to deliver a conceptual design for the proposed HC-HTGR in 3 years and support its commercialization as a safe, low-cost HTGR. Argonne National Laboratory (Argonne) is responsible for the design and analysis of the reactor cavity cooling system (RCCS) as a safety system for passive decay heat removal of the reactor concept. Additionally, Argonne is providing analysis of the primary heat transport system to ensure temperatures in the reactor systems, structures and components with significant safety margins during normal operation and design basis accident scenarios. This third semi-annual report summarized the progress made at Argonne on the two tasks during the first half of FY23. As a part of the RCCS design task, a design process for the water panel and the system configuration was performed to improve the thermal performance of the RCCS. The updated water panel design had achieved enhanced thermal performance with 0.96 MWth capability with major design updates made in structural interfaces with the RPV and initial configuration of the water tanks. The loop configuration of the RCCS has been proposed to have two independently working loops for system redundancy. A water panel material study was performed focusing on the use of carbon steel in water systems. Additional modeling strategies of primary system thermal fluids analyses were developed to meet modeling needs that are not well suited for the 1D-3D assembly level approach. The first of these is a reduced order assembly model, in which fuel centered unit cells are used to represent a fuel assembly. The 2D approach used in this model is much more computationally efficient, making this model useful for full core transient scenarios where fuel to coolant heat transfer is still the dominant flow path. The next model is the 3D core conduction model to be used to analyze decay heat removal in loss of primary system flow scenarios. Because these scenarios require a large domain to be modeled, a homogenized core model is being pursued to reduce the required computational costs. To accurately model decay heat scenarios it is necessary to couple a RCCS model to the 3D core conduction model. A simplified case is presented to demonstrate how the coupling methodology will be applied to the full core 3D conduction model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗