Search NASA⌕ Search

SEARCH · Search NASA

Results for “Kernel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

A higher order panel method for general analysis and design applications in subsonic flow

A higher-order panel method is described for numerical solution of boundary-value problems relating to steady inviscid irrotational incompressible subsonic fluid flow in a domain. Both Neumann and Dirichlet boundary conditions are treated; two types of auxiliary conditions are used to remove the degrees of freedom that arise from specifying only the derivative of the perturbation velocity potential. Four general network types and two expansions of the induced potential kernel are employed in the numerical solution. Some results are presented which illustrate the modeling options and numerical characteristics of the method.

Johnson, F. T.↗

A jet engine control problem for evaluating minimal design software

The problem of designing feedforward and feedback compensators to achieve a specified closed loop performance matrix is shown to reduce to a minimal design problem. Existing results for the F100 turbofan engine can be interpreted to yield the closed loop specifications for the associated control problem - and also a possible solution. All possible solutions can be enumerated by computing the kernel of a polynomial matrix. It is shown how this matrix can be obtained from the formulation of the minimal design problem.

Gejji, R. R.↗

The resolvent of singular integral equations

The investigation reported is concerned with the construction of the resolvent for any given kernel function. In problems with ill-behaved inhomogeneous terms as, for instance, in the aerodynamic problem of flow over a flapped airfoil, direct numerical methods become very difficult. A description is presented of a solution method by resolvent which can be employed in such problems.

Williams, M. H.↗

The problem of internal and edge cracks in an orthotropic strip

The plane elastostatic problem of internal and edge cracks in an infinite orthotropic strip is considered. The problems for the material types I and II are formulated in terms of singular integral equations. For the symmetric case the stress-intensity factors are calculated and are compared with the isotropic results. The results show that because of the dependence of the Fredholm kernels on the elastic constants in the strip (unlike the crack problem for an infinite plane) the stress-intensity factors are dependent on the elastic constants and are generally different from the corresponding isotropic results

Delale, F.↗

An extension to the Chahine method of inverting the radiative transfer equation

An extension of the Chahine relaxation method (1970) for inverting the radiative transfer equation is presented. This method is superior to the original method in that it takes into account in a realistic manner the shape of the kernel function, and its extension to nonlinear systems is much more straightforward. A comparison of the new method with a matrix method due to Twomey (1965), in a problem involving inference of vertical distribution of ozone from spectroscopic measurements in the near ultraviolet, indicates that in this situation this method is stable with errors in the input data up to 4%, whereas the matrix method breaks down at these levels. The problem of non-uniqueness of the solution, which is a property of the system of equations rather than of any particular algorithm for solving them, remains, although it takes on slightly different forms for the two algorithms.

Twomey, S.↗

The matching of biological and technical elements and systems

The conditions necessary for matching the input-output relationships of nonlinear dynamic systems without memory and with image memory are discussed. A structural representation is provided for the input-output relationships of matched elements and systems with distributed kernels.

Zozulya, Y. I.↗

User's Guide for a Modular Flutter Analysis Software System (Fast Version 1.0)

The use and operation of a group of computer programs to perform a flutter analysis of a single planar wing are described. This system of programs is called FAST for Flutter Analysis System, and consists of five programs. Each program performs certain portions of a flutter analysis and can be run sequentially as a job step or individually. FAST uses natural vibration modes as input data and performs a conventional V-g type of solution. The unsteady aerodynamics programs in FAST are based on the subsonic kernel function lifting-surface theory although other aerodynamic programs can be used. Application of the programs is illustrated by a sample case of a complete flutter calculation that exercises each program.

Desmarais, R. N.↗

Analysis of preflutter and postflutter characteristics with motion-matched aerodynamic forces

The development of the equations of dynamic equilibrium for a lifting surface from Lagrange's equation is reviewed and restated for general exponential growing and decaying oscillatory motion. Aerodynamic forces for this motion are obtained from the three-dimensional supersonic kernel function that is newly generalized to complex reduced frequencies. Illustrative calculations were made for two flutter models at supersonic Mach numbers. Preflutter and postflutter motion isodecrement curves were obtained. This type of analysis can be used to predict preflutter behavior during flutter testing and to predict postflutter behavior for use in the design of flutter suppression systems.

Cunningham, H. J.↗

Mixed boundary-value problems in mechanics

Definitions in the case of multiple series equations and multiple integral equations are examined. In considering the solution of a given mixed boundary value problem perhaps the simplest technique is the direct application of the method of complex potentials provided the problem admits such potentials and the domain and the boundary conditions are suitable for such an application. The direct application of complex potentials is described with the aid of examples, taking into account a problem in potential theory, the case of periodic cuts, and an elasticity problem for a nonhomogeneous plane. The reduction to singular integral equations is discussed along with the numerical solution of singular integral equations of the first kind, integral equations with generalized Cauchy kernels, and singular integral equations of the second kind.

Erdogan, F.↗

Advanced panel-type influence coefficient methods applied to unsteady three dimensional potential flows

A panel method for solving unsteady, subsonic wind-body-tail flow problems is formulated and partially verified. The method is applicable to general aircraft configurations consisting of arbitrary arrangements of wings, bodies, tails, and nacelles. The wake may be located arbitrarily and the unsteady, transverse component of vorticity in the wake may be assigned any covection velocity. The wake in the unsteady flow problem, therefore, can be given the location and convection velocity of the wake produced by a steady flow which is the mean flow of the unsteady flow problem. The panel method has been used as a basis for expanding the unsteady kernel function in a power series to obtain panel influence coefficients which can be integrated in closed form.

Dusto, A. R.↗

Interfering surfaces in subsonic, transonic, and supersonic flow

Computer program provides analysis method based on kernel-function technique that uses assumed pressure functions with unknown coefficients. With technique, generalized forces are calculated in unsteady flow, and pressure distributions are obtained in steady and unsteady flow.

Cunningham, A. M., Jr.↗

Effect of tropospheric aerosols upon atmospheric infrared cooling rates

The effect of tropospheric aerosols on atmospheric infrared cooling rates is investigated by the use of recent models of infrared gaseous absorption. A radiative model of the atmosphere that incorporates dust as an absorber and scatterer of infrared radiation is constructed by employing the exponential kernel approximation to the radiative transfer equation. Scattering effects are represented in terms of a single scattering albedo and an asymmetry factor. The model is applied to estimate the effect of an aerosol layer made of spherical quartz particles on the infrared cooling rate. Calculations performed for a reference wavelength of 0.55 microns show an increased greenhouse effect, where the net upward flux at the surface is reduced by 10% owing to the strongly enhanced downward emission. There is a substantial increase in the cooling rate near the surface, but the mean cooling rate throughout the lower troposphere was only 10%.

Harshvardhan, MR.↗

Reducing the error of geoid undulation computations by modifying Stokes' function

The truncation theory as it pertains to the calculation of geoid undulations based on Stokes' integral, but from limited gravity data, is reexamined. Specifically, the improved procedures of Molodenskii et al. are shown through numerical investigations to yield substantially smaller errors than the conventional method that is often applied in practice. In this improved method, as well as in a simpler alternative to the conventional approach, the Stokes' kernel is suitably modified in order to accelerate the rate of convergence of the error series. These modified methods, however, effect a reduction in the error only if a set of low-degree potential harmonic coefficients is utilized in the computation. Consider, for example, the situation in which gravity anomalies are given in a cap of radius 10 deg and the GEM 9 (20,20) potential field is used. Then, typically, the error in the computed undulation (aside from the spherical approximation and errors in the gravity anomaly data) according to the conventional truncation theory is 1.09 m; with Meissl's modification it reduces to 0.41m, while Molodenskii's improved method gives 0.45 m. A further alteration of Molodenskii's method is developed and yields an RMS error of 0.33 m. These values reflect the effect of the truncation, as well as the errors in the GEM 9 harmonic coefficients. The considerable improvement, suggested by these results, of the modified methods over the conventional procedure is verified with actual gravity anomaly data in two oceanic regions, where the GEOS-3 altimeter geoid serves as the basis for comparison. The optimal method of truncation, investigated by Colombo, is extremely ill-conditioned. It is shown that with no corresponding regularization, this procedure is inapplicable.

Jekeli, C.↗

Unsteady Subsonic Loadings Due to Control-Surface Motion

RHOIV computer program predicts unsteady lifting-surface loadings caused by motions of leading edge and trailing-edge control surfaces having sealed gaps at hinge lines and side edges. Analysis is based on linear, subsonic, potential-flow theory using kernel function method. Linear combinations of pressure distributions are used that are continuous except at planform edges and hinge lines. Loading solution is obtained by downwash collocation for deflection or motion of main wing and control surfaces.

Rowe, W. S.↗

Scatter of X-rays on polished surfaces

In investigating the dispersion properties of telescope mirrors used in X-ray astronomy, the slight scattering characteristics of X-ray radiation by statistically rough surfaces were examined. The mathematics and geometry of scattering theory are described. The measurement test assembly is described and results of measurements on samples of plane mirrors are given. Measurement results are evaluated. The direct beam, the convolution of the direct beam and the scattering halo, curve fitting by the method of least squares, various autocorrelation functions, results of the fitting procedure for small scattering, and deviations in the kernel of the scattering distribution are presented. A procedure for quality testing of mirror systems through diagnosis of rough surfaces is described.

Hasinger, G.↗

Transonic flutter study of a wind-tunnel model of an arrow-wing supersonic transport

A 1/20-size, low-speed flutter model of the SCAT-15F complete airplane was tested on cables to simulate a near free-flying condition. Only the model wing and fuselage were flexible. Flutter boundaries were measured for a nominal configuration and a configuration with wing fins removed at Mach numbers M from 0.76 to 1.2. For both configurations, the transonic dip in the wing flutter dynamic pressure q boundary was relatively small and the minimum flutter q occurred near M = 0.92. Removing the wing fins increased the flutter q about 14 percent and changed the flutter mode from symmetric to antisymmetric. Vibration and flutter analyses were made using a finite-element structural representation and subsonic kernel-function aerodynamics. For the nominal configuration, the analysis (using calculated modal data) predicted the experimental flutter q levels within 10 percent but did not predict the correct flutter mode at the higher M. For the configuration without wing fins, the analysis predicted 16 to 36 percent unconservative (higher than experimental) flutter q levels and showed extreme sensitivity to mass representation details that affected wing tip mode shapes. For high subsonic M, empennage aerodynamics had a significant effect on the predicted flutter boundaries of several symmetric modes.

Ruhlin, C. L.↗