Search NASA⌕ Search

SEARCH · Search NASA

Results for “LEVELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Fermi level pinning induced electrostatic fields and band bending at organic heterojunctions

The energy level alignment at interfaces between organic semiconductors is of direct relevance to understand charge carrier generation and recombination in organic electronic devices. Commonly, work function changes observed upon interface formation are interpreted as interface dipoles. In this study, using ultraviolet and X-ray photoelectron spectroscopy, complemented by electrostatic calculations, we find a huge work function decrease of up to 1.4 eV at the C{sub 60} (bottom layer)/zinc phthalocyanine (ZnPc, top layer) interface prepared on a molybdenum trioxide (MoO{sub 3}) substrate. However, detailed measurements of the energy level shifts and electrostatic calculations reveal that no interface dipole occurs. Instead, upon ZnPc deposition, a linear electrostatic potential gradient is generated across the C{sub 60} layer due to Fermi level pinning of ZnPc on the high work function C{sub 60}/MoO{sub 3} substrate, and associated band-bending within the ZnPc layer. This finding is generally of importance for understanding organic heterojunctions when Fermi level pinning is involved, as induced electrostatic fields alter the energy level alignment significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlation of a generation-recombination center with a deep level trap in GaN

We report on the identification of a deep level trap centre which contributes to generation-recombination noise. A n-GaN epilayer, grown by MOCVD on sapphire, was measured by deep level transient spectroscopy (DLTS) and noise spectroscopy. DLTS found 3 well documented deep levels at E{sub c} − 0.26 eV, E{sub c} − 0.59 eV, and E{sub c} − 0.71 eV. The noise spectroscopy identified a generation recombination centre at E{sub c} − 0.65 ± 0.1 eV with a recombination lifetime of 65 μs at 300 K. This level is considered to be the same as the one at E{sub c} − 0.59 eV measured from DLTS, as they have similar trap densities and capture cross section. This result shows that some deep levels contribute to noise generation in GaN materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SATURATION LEVELS FOR WHITE-LIGHT FLARES OF FLARE STARS: VARIATION OF MINIMUM FLARE DURATION FOR SATURATION

Taking into account results obtained from models and from statistical analyses of obtained parameters, we discuss flare activity levels and flare characteristics of five UV Ceti stars. We present the parameters of unpublished flares detected over two years of observations of V1005 Ori. We compare parameters of the U-band flares detected over several seasons of observations of AD Leo, EV Lac, EQ Peg, V1054 Oph, and V1005 Ori. Flare frequencies calculated for all program stars and maximum energy levels of the flares are compared, and we consider which is the most correct parameter as an indicator of flare activity levels. Using the One Phase Exponential Association function, the distributions of flare equivalent duration versus flare total duration are modeled for each program star. We use the Independent Samples t-Test in the statistical analyses of the parameters obtained from the models. The results reveal some properties of flare processes occurring on the surfaces of UV Ceti type stars. (1) Flare energies cannot be higher than a specific value regardless of the length of the flare total duration. This must be a saturation level for white-light flares occurring in flare processes observed in the U band. Thus, for the first time it is shown that white-light flares have a saturation in a specific energy range. (2) The span values, which are the difference between the equivalent durations of flares with the shortest and longest total durations, are almost equal for each star. (3) The half-life values, minimum flare durations for saturation, increase toward the later spectral types. (4) Both maximum total durations and maximum rise times computed from the observed flares decrease toward the later spectral types among the UV Ceti stars. According to the maximum energy levels obtained from the models, both EV Lac and EQ Peg are more active than the other three program stars, while AD Leo is the most active flare star according to the flare frequencies.

79 ASTRONOMY AND ASTROPHYSICS↗

Deep level defects in dilute GaAsBi alloys grown under intense UV illumination

Dilute GaAs1-xBix alloys exhibiting narrow band edge photoluminescence (PL) were recently grown by molecular beam epitaxy (MBE) with the growth surface illuminated by intense UV radiation. To investigate whether the improved optical quality of these films results from a reduction in the concentration of deep level defects, p+/n and n+/p junction diodes were fabricated on both the illuminated and dark areas of several samples. Deep Level Transient Spectroscopy (DLTS) measurements show that the illuminated and dark areas of both the n- and p-type GaAs1-xBix epi-layers have similar concentrations of near mid-gap electron and hole traps, in the 1015 cm-3 range. Thus the improved PL spectra cannot be explained by a reduction in non-radiative recombination at deep level defects. We note that carrier freeze-out above 35 K is significantly reduced in the illuminated areas of the p-type GaAs1-xBix layers compared to the dark areas, allowing the first DLTS measurements of defect energy levels close to the valence band edge. These defect levels may account for differences in the PL spectra from the illuminated and dark areas of un-doped layers with a similar Bi fraction.

14 SOLAR ENERGY↗

Realizing tunable Fermi level in SnTe by defect control

The tuning of the Fermi level in tin telluride, a topological crystalline insulator, is essential for accessing its unique surface states and optimizing its electronic properties for applications such as spintronics and quantum computing. In this study, we demonstrate that the Fermi level in tin telluride can be effectively modulated by controlling the tin concentration during chemical vapor deposition synthesis. By introducing tin-rich conditions, we observed a blue shift in the x-ray photoelectron spectroscopy core-level peaks of both tin and tellurium, indicating an upward shift in the Fermi level. Further, this shift is corroborated by a decrease in work function values measured via ultraviolet photoelectron spectroscopy, confirming the suppression of Sn vacancies. Our findings provide a low-cost, scalable method to achieve tunable Fermi levels in tin telluride, offering a significant advancement in the development of materials with tailored electronic properties for next-generation technological applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analyzing the Performance Trade-Off in Implementing User-Level Threads

User-level threads have been widely adopted as a means of achieving lightweight concurrent execution without the costs of OS-level threads. Nevertheless, the costs of managing user-level threads represent a performance barrier that dictates how fine grained the concurrency exposed by an application can be without incurring significant overheads; this in turn may translate into insufficient parallelism to exploit highly parallel systems. This article is a deep dive into the fundamental costs in implementing user-level threads. We first identify that one of the highest sources of fork-join overheads stems from deviations, events that incur context switching during the execution of a thread and disrupt a run-to-completion execution. We then conduct an in-depth investigation of a wide spectrum of methods with respect to how they handle deviations while covering both parent- and child-first scheduling policies. Our methodology involves a comprehensive instruction- and cache-level analysis of all methods on several modern CPU architectures. Finally, the primary finding of our evaluation is that dynamic promotion methods that assume the absence of deviation and dynamically provide context-switching support offer the best trade-off between performance and capability when the likelihood of deviation is low.

97 MATHEMATICS AND COMPUTING↗

Li induced effects in the core level and π-band electronic structure of graphene grown on C-face SiC

Studies of the effects induced in the electronic structure after Li deposition, and subsequent heating, on graphene samples prepared on C-face SiC are reported. The as prepared graphene samples are essentially undoped, but after Li deposition, the Dirac point shifts down to 1.2 eV below the Fermi level due to electron doping. The shape of the C 1s level also indicates a doping concentration of around 10{sup 14 }cm{sup −2} after Li deposition, when compared with recent calculated results of core level spectra of graphene. The C 1s, Si 2p, and Li 1s core level results show little intercalation directly after deposition but that most of the Li has intercalated after heating at 280 °C. Heating at higher temperatures leads to desorption of Li from the sample, and at 1030 °C, Li can no longer be detected on the sample. The single π-band observable from multilayer C-face graphene samples in conventional angle resolved photoelectron spectroscopy is reasonably sharp both on the initially prepared sample and after Li deposition. After heating at 280 °C, the π-band appears more diffuse and possibly split. The Dirac point becomes located at 0.4 eV below the Fermi level, which indicates occurrence of a significant reduction in the electron doping concentration. Constant energy photoelectron distribution patterns extracted from the as prepared graphene C-face sample and also after Li deposition and heating at 280 °C look very similar to earlier calculated distribution patterns for monolayer graphene.

42 ENGINEERING↗

Vanadium deep impurity level in diluted magnetic semiconductors Pb{sub 1-x-y}Sn{sub x}V{sub y}Te

The crystal structure, Sn and V distribution over the length of single-crystal ingots, and galvanomagnetic effects in low magnetic fields (4.2 K {<=} T {<=} 300 K, B {<=} 0.07 T) in Pb{sub 1-x-y}Sn{sub x}V{sub y}Te alloys (x = 0.05-0.21, y {<=} 0.015) are studied. It is shown that all the samples are single-phase, while the Sn and V concentrations exponentially increase from the beginning to the end of the ingots. Upon doping with V, a decrease in the concentration of free holes and a metal-insulator transition are found. They are related to the appearance of a deep impurity level of V in the band gap, electron redistribution between the level and the valence band, and pinning of the Fermi-level to the impurity level. The shift rate of the V level relative to the conduction band bottom is determined and a diagram of the reconstruction of the electronic structure of the Pb{sub 1-x-y}Sn{sub x}V{sub y}Te alloy upon varying the host composition is suggested.

36 MATERIALS SCIENCE↗

Experimental level densities of atomic nuclei

It is almost 80 years since Hans Bethe described the level density as a non-interacting gas of protons and neutrons. In all these years, experimental data were interpreted within this picture of a fermionic gas. However, the renewed interest of measuring level density using various techniques calls for a revision of this description. In particular, the wealth of nuclear level densities measured with the Oslo method favors the constant-temperature level density over the Fermi-gas picture. Furthermore, trom the basis of experimental data, we demonstrate that nuclei exhibit a constant-temperature level density behavior for all mass regions and at least up to the neutron threshold.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Conceptual framework and trend analysis of water-level responses to hydrologic stresses, Pahute Mesa–Oasis Valley groundwater basin, Nevada, 1966-2016: U.S. Geological Survey Scientific Investigations Report 2018-5064

This report identifies water-level trends in wells and provides a conceptual framework that explains the hydrologic stresses and factors causing the trends in the Pahute Mesa– Oasis Valley (PMOV) groundwater basin, southern Nevada. Water levels in 79 wells were analyzed for trends between 1966 and 2016. The magnitude and duration of water-level responses to hydrologic stresses were analyzed graphically, statistically, and with water-level models. The conceptual framework consists of multiple stress-specific conceptual models to explain water-level responses to the following hydrologic stresses: recharge, evapotranspiration, pumping, nuclear testing, and wellbore equilibration. Dominant hydrologic stresses affecting waterlevel trends in each well were used to categorize trends as nonstatic, transient, or steady state.

54 ENVIRONMENTAL SCIENCES↗

Case Study: Field Evaluation of a Low-Cost Circuit-Level Electrical Submetering System

Circuit-level metering technologies provide the ability to monitor individual circuits within an electrical panel in a building, providing detailed power and energy consumption data at a much more granular level than was previously achievable in a cost-effective manner. While the fundamental hardware components of circuit-level—split-core current transformers (CTs) and power monitoring meters—have existed for some time, the new offerings in the market have tightly integrated these components, lower costs, and have streamlined data organization, transport, and access via software solutions accessible through web and application programming interfaces (API). NREL evaluated Meazon’s single-circuit metering system. The evaluation of the equipment under test (EUT) focused on three aspects: (1) accuracy of the data provided by the system, (2) ease of installation of this technology and ease of data integration into existing U.S. General Services Administration (GSA) analytics platforms, and (3) total cost of ownership and cost-effectiveness of the technology. The metering technology was tested in a field deployment where it was installed in low and high-voltage commercial electrical panels in the César E. Chávez Memorial Building in Denver, Colorado. The goals were to assess the metering accuracy, the ease of installation and data retrieval, and the total cost of ownership and cost-effectiveness. This technology proved easy to install by a certified electrician who completed the install of 6 meters in 2 separate panels (120/208 V and 277/480 V) and 2 circuit disconnects (along with associated commissioning) at the César E. Chávez Memorial Building in less than one day. The technology was installed in high- and low-voltage panels and with limited space in the electrical room, demonstrating the applicability of this technology to almost all commercial buildings in the GSA portfolio. Primary considerations for this technology include appropriate sizing of CTs for each circuit, selection of loads/circuits/panels that are of high value for detailed submetering (e.g., tailored for high-load devices), and how GSA would like to integrate these data with its existing energy management infrastructure. Through the field evaluation, we demonstrated data integration from the vendor system into the primary software component on the GSA enterprise-level energy management and information system, GSA Link. Data from the circuit-level metering were integrated into this platform and used to perform FDD. This demonstrated the ability of the EUT to augment existing energy management and information systems in buildings where GSA Link is deployed and provides a pathway for delivering FDD at other buildings throughout the portfolio.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Vulnerability of Wetlands Due to Projected Sea-Level Rise in the Coastal Plains of the South and Southeast United States

Coastal wetlands are vulnerable to accelerated sea-level rise, yet knowledge about their extent and distribution is often limited. We developed a land cover classification of wetlands in the coastal plains of the southern United States along the Gulf of Mexico (Texas, Louisiana, Mississippi, Alabama, and Florida) using 6161 very-high (2 m per pixel) resolution WorldView-2 and WorldView-3 satellite images from 2012 to 2015. Area extent estimations were obtained for the following vegetated classes: marsh, scrub, grass, forested upland, and forested wetland, located in elevation brackets between 0 and 10 m above sea level at 0.1 m intervals. Sea-level trends were estimated for each coastal state using tide gauge data collected over the period 1983–2021 and projected for 2100 using the trend estimated over that period. These trends were considered conservative, as sea level rise in the region accelerated between 2010 and 2021. Estimated losses in vegetation area due to sea level rise by 2100 are projected to be at least 12,587 km 2 , of which 3224 km 2 would be coastal wetlands. Louisiana is expected to suffer the largest losses in vegetation (80%) and coastal wetlands (75%) by 2100. Such high-resolution coastal mapping products help to guide adaptation plans in the region, including planning for wetland conservation and coastal development.

54 ENVIRONMENTAL SCIENCES↗

Role of Perturbing Ocean Initial Condition in Simulated Regional Sea Level Change

Multiple lines of observational evidence indicate that the global climate has been getting warmer since the early 20th century. This warmer climate has led to a global mean sea level rise of about 18 cm during the 20th century, and over 6 cm for the first 15 years of the 21st century. Regionally the sea level rise is not uniform due in large part to internal climate variability. To better serve the community, the uncertainties of predicting/projecting regional sea level changes associated with internal climate variability need to be quantified. Previous research on this topic has used single-model large ensembles with perturbed atmospheric initial conditions (ICs). Here we compare uncertainties associated with perturbing ICs in just the atmosphere and just the ocean using a state-of-the-art coupled climate model. We find that by perturbing the oceanic ICs, the uncertainties in regional sea level changes increase compared to those with perturbed atmospheric ICs. In order for us to better assess the full spectrum of the impacts of such internal climate variability on regional and global sea level rise, approaches that involve perturbing both atmospheric and oceanic initial conditions are thus necessary.

54 ENVIRONMENTAL SCIENCES↗

Level-1C Product from AIRS: Principal Component Filtering

The Atmospheric Infrared Sounder (AIRS), launched on the EOS Aqua spacecraft on May 4, 2002, is a grating spectrometer with 2378 channels in the range 3.7 to 15.4 microns. In a grating spectrometer each individual radiance measurement is largely independent of all others. Most measurements are extremely accurate and have very low noise levels. However, some channels exhibit high noise levels or other anomalous behavior, complicating applications needing radiances throughout a band, such as cross-calibration with other instruments and regression retrieval algorithms. The AIRS Level-1C product is similar to Level-1B but with instrument artifacts removed. This paper focuses on the "cleaning" portion of Level-1C, which identifies bad radiance values within spectra and produces substitute radiances using redundant information from other channels. The substitution is done in two passes, first with a simple combination of values from neighboring channels, then with principal components. After results of the substitution are shown, differences between principal component reconstructed values and observed radiances are used to investigate detailed noise characteristics and spatial misalignment in other channels.

Noise Equivalent delta Temperature (NEdT)↗

Flood Hazard Assessment from Storm Tides, Rain and Sea Level Rise for a Tidal River Estuary

Cities and towns along the tidal Hudson River are highly vulnerable to flooding through the combination of storm tides and high streamflows, compounded by sea level rise. Here a three-dimensional hydrodynamic model, validated by comparing peak water levels for 76 historical storms, is applied in a probabilistic flood hazard assessment. In simulations, the model merges streamflows and storm tides from tropical cyclones (TCs), offshore extratropical cyclones (ETCs) and inland "wet extratropical" cyclones (WETCs). The climatology of possible ETC and WETC storm events is represented by historical events (1931-2013), and simulations include gauged streamflows and inferred ungauged streamflows (based on watershed area) for the Hudson River and its tributaries. The TC climatology is created using a stochastic statistical model to represent a wider range of storms than is contained in the historical record. TC streamflow hydrographs are simulated for tributaries spaced along the Hudson, modeled as a function of TC attributes (storm track, sea surface temperature, maximum wind speed) using a statistical Bayesian approach. Results show WETCs are important to flood risk in the upper tidal river (e.g., Albany, New York), ETCs are important in the estuary (e.g., New York City) and lower tidal river, and TCs are important at all locations due to their potential for both high surge and extreme rainfall. The raising of floods by sea level rise is shown to be reduced by approximately 30-60 percent at Albany due to the dominance of streamflow for flood risk. This can be explained with simple channel flow dynamics, in which increased depth throughout the river reduces frictional resistance, thereby reducing the water level slope and the upriver water level.

Tidal river↗

Maldives Climate II: Evaluating the Potential Impacts of Sea Level Rise on Human Development and Coastal Infrastructure

The Republic of the Maldives is a low-lying island nation in the Indian Ocean which has experienced rapid urbanization, landcover changes, and sea level rise over recent years. The growth of tourism, coastal erosion, and urbanization have all driven land reclamation efforts across many islands. As in-situ landcover change monitoring has proven difficult across the vast archipelago, the NASA DEVELOP team collaborated with the Maldives Ministry of Environment, Climate Change, and Technology; USAID; and the U.S. Department of State, to utilize Earth observations to predict sea level rise impacts on coastal infrastructure. The team used a supervised classification algorithm within Google Earth Engine to create land use maps and time series analyses of nine islands and atolls using imagery from Landsat 7 Enhanced Thematic Mapper Plus, Landsat 8 Operational Land Imager, Sentinel-2 Multispectral Instrument, and PlanetScope, covering a combined period of 2000 through 2023. Additionally, the team projected coastal inundation with a modified deterministic Bathtub model utilizing elevation data from CoastalDEM and 2050-2100 Shared Socioeconomic Pathway scenarios identified in the NASA Sea Level Rise Projection Tool. The team found that islands undergoing urban growth experienced a 23% decrease in vegetation between 2014 and 2022. Furthermore, the model predicted that 51–57% of the study area’s-built environment has a chance of inundation by 2100 under the low and high sea level scenarios. These analyses demonstrate how remote sensing can be used to both track land use changes over time and project how coastlines will be affected by sea level rise.

remote sensing↗

Integrated Computational Materials Engineering (ICME) Capability Maturity Levels for Ecosystems Enabling Digital Transformation

Digital engineering (DE) and integrated computational materials engineering (ICME) are widely recognized as critical enablers of faster, more affordable, and more reliable aerospace systems. However, many organizations have struggled to realize the promised return on investment (ROI) from digital initiatives. A primary reason is the absence of a shared, decision-focused framework that distinguishes simple digitization of existing workflows from true digital transformation that fundamentally changes how engineering decisions are made. This paper introduces an ICME capability maturity framework that fills this gap. The framework defines six cumulative ICME capability maturity levels (CMLs), explicitly tied to decision authority, engineering integration, optimization, and uncertainty management across material, process, structure, and performance scales. It is designed to complement established readiness metrics such as technology readiness levels (TRLs), manufacturing readiness levels (MRLs), and integration readiness levels (IRLs), by addressing a missing dimension: the conditions required for model-informed decision authority across scales. A unifying figure and capability table illustrate the six-level ICME Capability Maturity Framework, showing how organizations progress from digitization—with limited or negative ROI—to true digital transformation, where ICME-enabled workflows deliver measurable improvements in decision quality, cycle time, risk reduction, and reuse. The framework is intended for both technical practitioners and executive leadership, providing a common language to assess current state, guide roadmaps, align software ecosystem investments, and set realistic expectations for digital transformation outcomes. A regulatory-relevant statement clarifying the relationship between ICME capability and existing certification frameworks is provided.

ICME↗

New high-spin level schemes and excitation modes of 117,118,119,120,122 Cd

High-spin level schemes of {sup 117,118,119,120,122}Cd are expanded by analyzing our high-statistics triple and higher-fold coincidence events of prompt fission {gamma} rays from {sup 252}Cf at Gammasphere. Spin/parity assignments were made based on new {gamma}-{gamma} angular correlation measurements and level systematics in the neighboring isotopes. Stretch-aligned band structures observed in low-lying levels in {sup 117,119,121}Cd are seen to weaken with increasing spins, with a quasi-rotational degree of freedom manifested at higher spins. The{sup 5-}levels in even-N{sup 118,120}Cd were tentatively interpreted as candidates of quadrupole-octupole (QOC) coupling. The model-independent spin versus {h_bar}{omega} curves for even-N and odd-N Cd isotopes imply quasirotational alignment of an h11/2 neutron pair in the even-N Cd isotopes. The relative energies of the lowest 11/{sup 2-}, 9/{sup 2-}, 7/{sup 2-}, and 15/{sup 2-} levels in {sup 117}Cd and {sup 119}Cd suggest triaxial shapes based on Meyer-Ter-Vehn theory for these odd-N Cd nuclei. For the even-N Cd isotopes evidence of triaxiality may also be provided by the Shell Correction version of the Tilted Axis Cranking model (SCTAC).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗