Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIGNITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Multistage fluidized bed reactor performance characterization for adsorption of carbon dioxide

Carbon dioxide and its different compounds are generated as primary greenhouse gases from the flue gases of coal-fired thermal power plants, boilers, and other stationary combustion processes. This greenhouse gas causes global warming after being emitted to the environment. To deal with this problem, a new dry scrubbing process was tested in this study. A three-stage countercurrent fluidized bed adsorber was developed, designed, and fabricated. It was used as a removal apparatus and operated in a continuous regime for the two-phase system. The height of each stage was 0.30 m, and the inner diameter was 0.10 m. The paper presents the removal of CO{sub 2} from gas mixtures by chemical sorption on porous granular calcium oxide particles in the reactor at ambient temperature. The advantages of a multistage fluidized bed reactor for high mass transfer and high gas-solid contact can enhance the removal of the gas when using a dry method. The effects of the operating parameters such as sorbent, superficial gas velocity, and the Weir height on CO{sub 2} removal efficiency in the multistage fluidized bed were investigated. The results indicate that the removal efficiency of the carbon dioxide was around 71% at a high solid flow rate corresponding to lower gas velocity at room temperature. In comparison with wet scrubbers, this dry process appears to have lower cost, less complicated configuration, and simpler disposal of used sorbent. The results in this study assume importance from the perspective of use of a multistage fluidized bed adsorber for control of gaseous pollutants at high temperature.

01 COAL, LIGNITE, AND PEAT↗

Long-term behavior of CaO-based pellets supported by calcium aluminate cements in a long series of CO{sub 2} capture cycles

A series of carbonation/calcination tests consisting of 1000 cycles was performed with CaO-based pellets prepared using hydrated lime and calcium aluminate cement. The change in CO{sub 2} carrying capacity of the sorbent was investigated in a thermogravimetric analyzer (TGA) apparatus and the morphology of residues after those cycles in the TGA was examined by scanning electron microscopy (SEM). Larger quantities of sorbent pellets underwent 300 carbonation/calcination cycles in a tube furnace (TF), and their properties were examined by nitrogen physisorption tests (BET and BJH). The crushing strength of the pellets before and after the CO{sub 2} cycles was determined by means of a custom-made strength testing apparatus. The results showed high CO{sub 2} carrying capacity in long series of cycles with an extremely high residual activity of the order of 28%. This superior performance is a result of favorable morphology due to the existence of large numbers of nanosized pores suitable for carbonation. This morphology is relatively stable during cycles due to the presence of mayenite (Ca{sub 12}Al{sub 14}O{sub 33}) in the CaO structure. However, the crushing tests showed that pellets lost strength after 300 carbonation/calcination cycles, and this appears to be due to the cracks formed in the pellets. This effect was not observed in smaller particles suitable for use in fluidized bed (FBC) systems.

01 COAL, LIGNITE, AND PEAT↗

Magnesia-stabilized calcium oxide absorbents with improved durability for high temperature CO{sub 2} capture

Calcium oxide based materials are attractive regenerable absorbents for separating CO{sub 2} from hot gas streams because of their high reactivity, high CO{sub 2} capacity, and low material cost. Their high carbonation temperature makes it possible to recover and use high quality heat released during CO{sub 2} capture, which increases overall process efficiency. However, the performance of all reported CaO-based absorbents deteriorates as the number of carbonation-decarbonation cycles increases. This is caused by absorbent sintering during the highly exothermic carbonation process. We have found that sintering can be effectively mitigated by properly mixing with a modest amount of MgO. A class of CaO-based absorbents with improved durability and CO{sub 2} reactivity were prepared by physical mixing of Ca(CH{sub 3}COO){sub 2} with small MgO particles followed by high temperature calcination. With 26 wt % MgO content, a CaO-MgO mixture prepared by this method gives as high as 53 wt % CO{sub 2} capacity after 50 carbonation-decarbonation cycles at 758{sup o}C. Without MgO addition, the CO{sub 2} capacity of pure CaO obtained from the same source decreases from 66 wt % for the first cycle to 26 wt % for the 50th cycle under the same test conditions.

01 COAL, LIGNITE, AND PEAT↗

Glass-based processing of mixed-oxide desulfurization sorbents

The favorable thermodynamics of the reaction between H{sub 2}S and oxides of iron, nickel, and zinc make these materials suitable for the sorption of sulfur from coal-derived synthesis gas. As an alternative to traditional solid-state processing, the suitability for coal gas desulfurization of glass-ceramics based on transition metal oxides has been evaluated. Glass-ceramics based on NiAl2O{sub 4} and ZnFe2O{sub 4} have similar sorption properties and a high resistance to agglomeration, but the inexpensive raw materials and moderate processing temperature of the ZnFe2O{sub 4}-based glass makes it more suitable for a commercial application. The overall performance is highly dependent on the particle size of the sorbent, but these materials can be formed with relatively high surface areas by using fiber-based processing. This material is a potential alternative to mixed oxide sorbents prepared by solid-state processing, as it offers comparable performance combined with the ability to process the glass by existing glass-processing techniques.

01 COAL, LIGNITE, AND PEAT↗

Modeling of multiphase flow and heat transfer in radiant syngas cooler of an entrained-flow coal gasification

A comprehensive model has been developed to analyze the multiphase flow and heat transfer in the radiant syngas cooler (RSC) of an industrial-scale entrained-flow coal gasification. The three-dimensional multiphase flow field and temperature field were reconstructed. The realizable {kappa}-{epsilon} turbulence model is applied to calculate the gas flow field, while the discrete random walk model is applied to trace the particles, and the interaction between the gas and the particle is considered using a two-way coupling model. The radiative properties of syngas mixture are calculated by weighted-sum-of-gray-gases model (WSGGM). The Ranz-Marshall correlation for the Nusselt number is used to account for convection heat transfer between the gas phase and the particles. The discrete ordinate model is applied to model the radiative heat transfer, and the effect of ash/slag particles on radiative heat transfer is considered. The model was successfully validated by comparison with the industrial plant measurement data, which demonstrated the ability of the model to optimize the design. The results show that a torch shape inlet jet was formed in the RSC, and its length increased with the diameter of the central channel. The recirculation zones appeared around the inlet jet, top, and bottom of the RSC. The overall temperature decreased with the heat-transfer surface area of the fins. The concentration distribution, velocity distribution, residence time distribution, and temperature distribution of particles with different diameters have been discussed. Finally, the slag/ash particles size distribution and temperature profile at the bottom of the RSC have been presented.

01 COAL, LIGNITE, AND PEAT↗

'Molecular Basket' sorbents for separation of CO{sub 2} and H{sub 2}S from various gas streams

A new generation of 'molecular basket' sorbents (MBS) has been developed by the optimum combination of the nanoporous material and CO{sub 2}/H{sub 2}S-philic polymer sorbent to increase the accessible sorption sites for CO{sub 2} capture from flue gas (Postdecarbonization), and for CO{sub 2} and H{sub 2}S separation from the reduced gases, such as synthesis gas, reformate (Predecarbonization), natural gas, coal/biomass gasification gas, and biogas. The sorption capacity of 140 mg of CO{sub 2}/g of sorb was achieved at 15 kPa CO{sub 2} partial pressure, which shows superior performance in comparison with other known sorbents. In addition, an exceptional dependence of MBS sorption performance on temperature for CO{sub 2} and H{sub 2}S was found and discussed at a molecular level via the computational chemistry approach. On the basis of the fundamental understanding of MBS sorption characteristics, an innovative sorption process was proposed and demonstrated at the laboratory scale for removing and recovering CO{sub 2} and H{sub 2}S, respectively, from a model gas. The present study provides a new approach for development of the novel CO{sub 2}/H{sub 2}S sorbents and may have a major impact on the advance of science and technology for CO{sub 2}/H{sub 2}S capture and separation from various gases.

01 COAL, LIGNITE, AND PEAT↗

Strong CO{sub 2} binding in a water-stable, triazolate-bridged metal-organic framework functionalized with ethylenediamine

Reaction of CuCl{sub 2}{center_dot}2H{sub 2}O with 1,3,5-tris(1H-1,2,3-triazol-5-yl)benzene (H{sub 3}BTTri) in DMF at 100{sup o}C generates the metal-organic framework H{sub 3}((Cu{sub 4}Cl){sub 3}(BTTri){sub 8}(DMF){sub 12}){center_dot}7DMF {center_dot} 76H{sub 2}O(1-DMF). The sodalite-type structure of the framework consists of BTTri{sup 3-}-linked (Cu{sub 4}Cl){sup 7+} square clusters in which each Cu-II center has a terminal DMF Ligand directed toward the interior of a large pore. The framework exhibits a high thermal stability of up to 270{sup o}C, as well as exceptional chemical stability in air, boiling water, and acidic media. Following exchange of the guest solvent and bound DMF molecules for methanol to give 1-MeOH, complete desolvation of the framework at 180 degrees C generated H{sub 3}(Cu{sub 4}Cl{sub 3}(BTTri){sub 8}) (1) with exposed Cu-II sites on its surface. Following a previously reported protocol, ethylenediamine molecules were grafted onto these sites to afford 1-en, featuring terminal alkylamine groups. The N{sub 2} adsorption isotherms indicate a reduction in the BET surface area from 1770 to 345 m{sup 2}/g following grafting. The H{sub 2} adsorption data at 77 K for 1 indicate a fully reversible uptake of 1.2 wt % at 1.2 bar, while the CO{sub 2} isotherm at 195 K shows a maximal uptake of 90 wt % at 1 bar. Compared to 1, the alkylamine-functionalized framework I-en exhibits a higher uptake of CO{sub 2} at 298 K and pressures up to ca. 0.1 bar, as well as a higher CO{sub 2}/N{sub 2} selectivity at all measured pressures. Significantly, 1-en also exhibits an isosteric heat of CO{sub 2} adsorption of 90 kJ/mol, which is much higher than the 21 kJ/mol observed for 1. This chemisorption interaction is the strongest reported to date for a metal-organic framework and points toward the potential utility of alkylamine-appended frameworks for the postcombustion capture of CO{sub 2} from low-pressure flue gas streams.

01 COAL, LIGNITE, AND PEAT↗

Solubility of carbon dioxide in an aqueous blend of diethanolamine and piperazine

The solubility of CO{sub 2} in aqueous blends of diethanolamine (DEA) and piperazine (PZ), from mixtures of CO{sub 2} and N{sub 2}, was measured for temperatures and CO{sub 2} partial pressures ranging from (303.14 to 353.14) K and (10.133 to 20.265) kPa, respectively. Measurements were made by a saturation method using a laboratory scale bubble column. The results of CO{sub 2} solubility in liquid are expressed as {alpha}(CO{sub 2}) (mol CO{sub 2}/mol amine) for all experimental runs. A solubility model is developed to correlate and predict the solubility data of CO{sub 2} in aqueous blends of DEA and PZ. There is all acceptable degree of agreement between the experimental data of the present study and predictions of the solubility model with an average absolute deviation of less than 4.5%.

01 COAL, LIGNITE, AND PEAT↗

Kinetically Relevant Steps and H2/D2 Isotope Effects in Fischer-Tropsch Synthesis on Fe and Co Catalysts

H2/D2 isotope effects on Fischer-Tropsch synthesis (FTS) rate and selectivity are examined here by combining measured values on Fe and Co at conditions leading to high C5+ yields with theoretical estimates on model Fe(110) and Co(0001) surfaces with high coverages of chemisorbed CO (CO*). Inverse isotope effects (rH/rD < 1) are observed on Co and Fe catalysts as a result of compensating thermodynamic (H2 dissociation to H*; H* addition to CO* species to form HCO*) and kinetic (H* reaction with HCO*) isotope effects. These isotopic effects and their rigorous mechanistic interpretation confirm the prevalence of H-assisted CO dissociation routes on both Fe and Co catalysts, instead of unassisted pathways that would lead to similar rates with H2 and D2 reactants. The small contributions from unassisted pathways to CO conversion rates on Fe are indeed independent of the dihydrogen isotope, as is also the case for the rates of primary reactions that form CO2 as the sole oxygen rejection route in unassisted CO dissociation paths. Isotopic effects on the selectivity to C5+ and CH4 products are small, and D2 leads to a more paraffinic product than does H2, apparently because it leads to preference for chain termination via hydrogen addition over abstraction. These results are consistent with FTS pathways limited by H-assisted CO dissociation on both Fe and Co and illustrate the importance of thermodynamic contributions to inverse isotope effects for reactions involving quasi-equilibrated H2 dissociation and the subsequent addition of H* in hydrogenation catalysis, as illustrated here by theory and experiment for the specific case of CO hydrogenation.

01 COAL, LIGNITE, AND PEAT↗

Explaining the differential solubility of flue gas components in ionic liquids from first-principle calculations

Flue gas is greatly responsible for acid rain formation and global warming. New generation ionic liquids (ILs) have potential in controlling the flue gas emissions, as they acquire high absorptivity for the component gases SO{sub 2}, CO{sub 2}, etc. The association of the IL-gas interactions to the absorptivity of gas molecules in ILs is, however, poorly understood. In this paper, we present a molecular level description of the interactions of ILs with SO{sub 2}, CO{sub 2}, and N{sub 2} and show its implications to the differential gas solubility. Our results indicate that the IL anion-gas interactions play a key role in deciding the gas solubility in ILs, particularly for polar gases such as SO{sub 2}. On the other hand, regular solution assumption applies to -2 solubility. In accordance with the previous theoretical and experimental findings, our results also imply that the IL anions dominate the interactions with gas molecules while the cations play a secondary role and the underlying fluid structures of the ILs remain unperturbed by the addition of gas molecules.

01 COAL, LIGNITE, AND PEAT↗

Combustion pathways of the alkylated heteroaromatics: bond dissociation enthalpies and alkyl group fragmentations

The bond dissociation enthalpies (BDEs) of the alkyl groups of the alkyl-substituted heterocycles have been studied and compiled using DFT methodology, with the intent of modeling the larger heterocyclic functionalities found in coal. DFT results were calibrated against CBS-QB3 calculations, and qualitative trends were reproduced between these methods. Loss of hydrogen at the benzylic position provided the most favorable route to radical formation, for both the azabenzenes and five-membered heterocycles. The ethyl derivatives had lower BDE values than the methyl derivatives due to increased stabilization of the corresponding radicals. Calculated spin densities correlated well with bond dissociation enthalpies for these compounds, while geometric effects were minimal with respect to the heterocycles themselves. Temperature effects on the bond dissociation enthalpies were minor, ranging by about 5 kcal/mol from 298 to 2000 K; the free energies of reaction dropped significantly over the same range due to entropic effects. Monocyclic heteroaromatic rings were seen to replicate the chemistry of multicyclic heteroaromatic systems.

01 COAL, LIGNITE, AND PEAT↗

Atomic-scale imaging and electronic structure determination of catalytic sites on Pd/Cu near surface alloys

Water-gas shift chemistry provides a useful method for producing hydrogen from coal; however, fuel cell applications demand that this hydrogen be free of impurities. Due to their unique properties, Pd/Cu alloys represent an import class of materials used for H purification membranes and also serve as the active metals in many heterogeneous catalysts. Little is known about how Pd and Cu interact electronically in these mixed systems and there is debate in the literature over the direction of charge transfer between the two species. This study used the differential conductance (dI/dV) spectroscopy capabilities of a low-temperature scanning tunneling microscope (STM) to investigate the atomic-scale electronic structure of Pd/Cu surface alloys. dI/dV spectroscopy gives a direct measure of the local density of states of surface sites with subnanometer precision. Results from this work demonstrate that individual, isolated Pd atoms in a Cu lattice are almost electronically identical to their host atoms. Over an energy range that spans 1 eV on either side of the Fermi level, the only significant electronic difference between isolated Pd and their host Cu atoms is that Pd atoms have a very slightly depleted electron density in the region of the Cu surface state maximum.

01 COAL, LIGNITE, AND PEAT↗

Infrared study of CO{sub 2} sorption over 'molecular basket' sorbent consisting of polyethylenimine-modified mesoporous molecular sieve

An infrared study has been conducted on CO{sub 2} sorption into nanoporous CO{sub 2} 'molecular basket' sorbents prepared by loading polyethylenimine (PEI) into mesoporous molecular sieve SBA-15. IR results from DRIFTS showed that a part of loaded PEI is anchored on the surface of SBA-15 through the interaction between amine groups and isolated surface silanol groups. Raising the temperature from 25 to 75{sup o}C increased the molecular flexibility of PEI loaded in the mesopore channels, which may partly contribute to the increase of CO{sub 2} sorption capacity at higher temperatures. CO{sub 2} sorption/desorption behavior studied by in situ transmission FTIR showed that CO{sub 2} is sorbed on amine sites through the formation of alkylammonium carbamates and absorbed into the multiple layers of PEI located in mesopores of SBA-15. A new observation by in situ IR is that two broad IR bands emerged at 2450 and 2160 cm{sup -1} with CO{sub 2} flowing over PEI(50)/SBA-15, which could be attributed to chemically sorbed CO{sub 2} species on PEI molecules inside the mesopores of SBA-15. The intensities of these two bands also increased with increasing CO{sub 2} exposure time and with raising CO{sub 2} sorption temperature. By comparison of the CO{sub 2} sorption rate at 25 and 75{sup o}C in terms of differential IR intensities, it was found that CO{sub 2} sorption over molecular basket sorbent includes two rate regimes which suggest two distinct steps: rapid sorption on exposed outer surface layers of PEI (controlled by sorption affinity or thermodynamics) and the diffusion and sorption inside the bulk of multiple layers of PEI (controlled by diffusion). The sorption of CO{sub 2} is reversible at 75{sup o}C.

01 COAL, LIGNITE, AND PEAT↗

Methanol to olefin Conversion on HSAPO-34 zeolite from periodic density functional theory calculations: a complete cycle of side chain hydrocarbon pool mechanism

For its unique position in the coal chemical industry, the methanol to olefin (MTO) reaction has been a hot topic in zeolite catalysis. Due to the complexities of catalyst structure and reaction networks, many questions such as how the olefin chain is built from methanol remain elusive. On the basis of periodic density functional theory calculations, this work establishes the first complete catalytic cycle for MTO reaction via hexamethylbenzene (HMB) trapped in HSAPO-34 zeolite based on the so-called side chain hydrocarbon pool mechanism. The cycle starts from the methylation of HMB that leads to heptamethylbenzenium ion (heptaMB{sup +}) intermediate. This is then followed by the growth of side chain via repeated deprotonation of benzenium ions and methylation of the exocyclic double bond. Ethene and propene can finally be released from the side ethyl and isopropyl groups of benzenium ions by deprotonation and subsequent protonation steps. We demonstrate that (i) HMB/HSAPO-34 only yields propene as the primary product based on the side chain hydrocarbon pool mechanism and (ii) an indirect proton-shift step mediated by water that is always available in the system is energetically more favorable than the traditionally regarded internal hydrogen-shift step. Finally, the implications of our results toward understanding the effect of acidity of zeolite on MTO activity are also discussed.

01 COAL, LIGNITE, AND PEAT↗

Hg binding on Pd binary alloys and overlays

The vast majority of the mercury released from coal combustion is elemental mercury. Noble metals such as Pd, Au, Ag, and Cu have been proposed to capture elemental mercury. Density functional theory calculations are carried out to investigate mercury interactions with Pd binary alloys and overlays in addition to pure Pd, Au, Ag, and Cu surfaces using a projected augmented wave method with the Perdew-Wang generalized 0 gradient approximation. It has been determined that Pd has the highest mercury binding energy in comparison to other noble metals. In addition, Pd is found to be the primary surface atom responsible for improving the interaction of mercury with the surface atoms in both Pd binary alloys and overlays. Deposition of Pd overlays on Au and Ag enhance the reactivity of the surface by shifting the d-states of surface atoms up in energy. Strong mercury binding causes a significant overlap between the s- and p-states of Pd and the d-state of Mercury.

01 COAL, LIGNITE, AND PEAT↗

Absorption of CO{sub 2} in the Ionic Liquid 1-n-Hexyl-3-methylimidazolium Tris(pentafluoroethyl)trifluorophosphate ((hmim)(FEP)): A Molecular View by Computer Simulations

Using a computational screening methodology, we predicted (AlChE J. 2008, 54, 2717) that the anion tris(pentafluoroethyl)trifluorophosphate ((FEP)) should increase the solubility of CO{sub 2} in ionic liquids (ILs) relative to a wide range of conventional anions. This prediction was confirmed experimentally. In this work, we develop a united-atom force field for the (FEP) anion and use the continuous fractional component Monte Carlo (CFC MC) method to predict CO{sub 2} absorption isotherms in 1-n-hexyl-3-methylimidazolium ((hmim)) (FEP) at 298.2 and 323.2 K and pressures up to 20.0 bar. The simulated isotherms overestimate the solubility of CO{sub 2} by about 20% but capture the experimental trends quite well. Additional Monte Carlo (MC) and molecular dynamics (MD) simulations are performed to study the mechanisms of CO{sub 2} absorption in (hmim)(FEP) and (hmim)(PF6). The site-site radial distribution functions (RDFs) show that CO{sub 2} is highly organized around the (PF6) anion due to its symmetry and smaller size, while less ordered distributions were found around (FEP) and (hmim). However, more CO{sub 2} can be found in the first coordination shell of (FEP) compared with (PF6). The Structures of ILs, illustrated by P-P radial distribution functions, change very little upon the addition of as much as 50 mol % CO{sub 2}. An energetic analysis shows that the van der Waals interactions between CO{sub 2} and ILs are generally larger than electrostatic interactions.

01 COAL, LIGNITE, AND PEAT↗

A kinetic investigation of high-temperature mercury oxidation by chlorine

First-stage mercury oxidation reactions typical of coal combustion flue gases were investigated. The present study is a determination of the kinetic and thermodynamic parameters of the bimolecular reactions, Hg + Cl{sub 2}{leftrightarrow} HgCl + Cl, Hg + HCl {leftrightarrow} HgCl + H, and Hg + HOCl {leftrightarrow} HgCl + OH, at the B3LYP/RCEP60 VDZ level of theory over a temperature range of 298.15 to 2000 K at atmospheric pressure. Conventional transition state theory was used to predict the forward and reverse rate constants for each reaction and ab initio based equilibrium constant expressions were calculated as a function of temperature. Reasonable agreement was achieved between the calculated equilibrium constants and the available experimental values.

01 COAL, LIGNITE, AND PEAT↗

Thermochemical Capture of Carbon Dioxide on Lithium Aluminates (LiAlO{sub 2} and Li{sub 5}AlO{sub 4}): A New Option for the CO{sub 2} Absorption

Lithium aluminates (LiAlO{sub 2} and Li{sub 5}AlO{sub 4}) were synthesized, characterized, and tested as possible CO{sub 2} captors. LiAlO{sub 2} did not seem to have good qualities for the CO{sub 2} absorption. On the contrary, Li{sub 5}AlO{sub 4} showed excellent behavior as a possible CO{sub 2} captor. Li{sub 5}AlO{sub 4} was thermally analyzed under a CO{sub 2} flux dynamically and isothermically at different temperatures. These results clearly showed that Li5AlO{sub 4} is able to absorb CO{sub 2} in a wide temperature range (200-700{sup o}C). Nevertheless, an important sintering effect was observed during the thermal treatment of the samples, which produced an atypical behavior during the CO{sub 2} absorption at low temperatures. However, at high temperatures, once the lithium diffusion is activated, the sintering effect did not interfere with the CO{sub 2} absorption. Eyring's model was used to determine the activation enthalpies of the CO{sub 2} absorption (15.6 kJ/mol) and lithium diffusion (52.1 kJ/mol); the last one is the limiting process.

01 COAL, LIGNITE, AND PEAT↗