Search NASA⌕ Search

SEARCH · Search NASA

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Safety Performance of Airborne Separation: Preliminary Baseline Testing

The Safety Performance of Airborne Separation (SPAS) study is a suite of Monte Carlo simulation experiments designed to analyze and quantify safety behavior of airborne separation. This paper presents results of preliminary baseline testing. The preliminary baseline scenario is designed to be very challenging, consisting of randomized routes in generic high-density airspace in which all aircraft are constrained to the same flight level. Sustained traffic density is varied from approximately 3 to 15 aircraft per 10,000 square miles, approximating up to about 5 times today s traffic density in a typical sector. Research at high traffic densities and at multiple flight levels are planned within the next two years. Basic safety metrics for aircraft separation are collected and analyzed. During the progression of experiments, various errors, uncertainties, delays, and other variables potentially impacting system safety will be incrementally introduced to analyze the effect on safety of the individual factors as well as their interaction and collective effect. In this paper we report the results of the first experiment that addresses the preliminary baseline condition tested over a range of traffic densities. Early results at five times the typical traffic density in today s NAS indicate that, under the assumptions of this study, airborne separation can be safely performed. In addition, we report on initial observations from an exploration of four additional factors tested at a single traffic density: broadcast surveillance signal interference, extent of intent sharing, pilot delay, and wind prediction error.

Consiglio, Maria C.↗

Sulfate radical oxidation of aromatic contaminants: a detailed assessment of density functional theory and high-level quantum chemical methods

We present that advanced oxidation processes that utilize highly oxidative radicals are widely used in water reuse treatment. In recent years, the application of sulfate radical (SO 4 ˙ - ) as a promising oxidant for water treatment has gained increasing attention. To understand the efficiency of SO 4 ˙ - in the degradation of organic contaminants in wastewater effluent, it is important to be able to predict the reaction kinetics of various SO 4 ˙ - -driven oxidation reactions. In this study, we utilize density functional theory (DFT) and high-level wavefunction-based methods (including computationally-intensive coupled cluster methods), to explore the activation energies of SO 4 ˙ - -driven oxidation reactions on a series of benzene-derived contaminants. Additionally, these high-level calculations encompass a wide set of reactions including 110 forward/reverse reactions and 5 different computational methods in total. Based on the high-level coupled-cluster quantum calculations, we find that the popular M06-2X DFT functional is significantly more accurate for OH - additions than for SO 4 ˙ - reactions. Most importantly, we highlight some of the limitations and deficiencies of other computational methods, and we recommend the use of high-level quantum calculations to spot-check environmental chemistry reactions that may lie outside the training set of the M06-2X functional, particularly for water oxidation reactions that involve SO 4 ˙ - and other inorganic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

La 1– x Bi 1+ x S 3 ( x ≈ 0.08): An n-Type Semiconductor

The new bismuth chalcogenide LaBiS3 crystallizes in the monoclinic space group C2/m with a = 27.997(5) Å, b = 4.0663(4) Å, c = 14.747(3) Å, and β = 118.55(3)°. The structure of LaBiS3 is built up of NaCl-type Bi2S5 blocks, and BiS4 and LaS5 infinitely long chains forming a compact three-dimensional framework. Optical spectroscopy and resistivity measurements reveal a semiconducting behavior with a direct band gap of 1.08(2) eV and activation energy of 0.36(1) eV. Thermopower measurements suggest the majority carriers of LaBiS3 are electrons. Heat capacity measurement indicates no phase transition from 2 to 300 K. Band structure calculations at the density function level support the presence of a direct band gap in LaBiS3.

Han, Fei↗

Electronic and magnetic properties of epitaxial perovskite SrCrO3(001)

We have investigated the intrinsic properties of SrCrO3 epitaxial thin films synthesized by molecular beam epitaxy. We find compelling evidence that SrCrO3 is a correlated metal. X-ray photoemission valence band and O K-edge x-ray absorption spectra indicate a strongly hybridized Cr3d-O2p state crossing the Fermi level, leading to metallic behavior. Comparison between valence band spectra near the Fermi level and the densities of states calculated using density functional theory (DFT) also suggests the presence of coherent and incoherent states and points to a strong electron-electron correlation effects. The magnetic susceptibility can be described by Pauli paramagnetism at temperatures above 100 K, but reveals antiferromagnetic behavior at lower temperatures resulting from orbital ordering as suggested by Ortega-San-Martin et al. [Phys. Rev. Lett. 99, 255701 (2007)].

Environmental Molecular Sciences Laboratory↗

Effects of the Wavelength of the Plasma Waves on Cross-Field Electron Transport in Partially Magnetized Plasmas

In this article, the effects of increasing plasma density on the cross-field electron transport driven by kinetic instabilities are investigated. A 2-D collisionless particle-in-cell (PIC) simulation is performed on cases with only singly charged ions and with a mixture of singly and doubly charged ions, at different levels of plasma density. It is observed using the PIC simulations that the level of plasma density affects the plasma waves that are driven by the microinstabilities, including the electron cyclotron drift instability (ECDI) and ion–ion two-stream instability (IITSI). Here, the simulation results suggest that the enhancement of cross-field electron transport is correlated with the excitation of smaller wavelength modes and the increased amplitude of the plasma waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Carbon X-ray absorption spectra of fluoroethenes and acetone: A study at the coupled cluster, density functional, and static-exchange levels of theory

Near carbon K-edge X-ray absorption fine structure spectra of a series of fluorine-substituted ethenes and acetone have been studied using coupled cluster and density functional theory (DFT) polarization propagator methods, as well as the static-exchange (STEX) approach. With the complex polarization propagator (CPP) implemented in coupled cluster theory, relaxation effects following the excitation of core electrons are accounted for in terms of electron correlation, enabling a systematic convergence of these effects with respect to electron excitations in the cluster operator. Coupled cluster results have been used as benchmarks for the assessment of propagator methods in DFT as well as the state-specific static-exchange approach. Calculations on ethene and 1,1-difluoroethene illustrate the possibility of using nonrelativistic coupled cluster singles and doubles (CCSD) with additional effects of electron correlation and relativity added as scalar shifts in energetics. It has been demonstrated that CPP spectra obtained with coupled cluster singles and approximate doubles (CC2), CCSD, and DFT (with a Coulomb attenuated exchange-correlation functional) yield excellent predictions of chemical shifts for vinylfluoride, 1,1-difluoroethene, trifluoroethene, as well as good spectral features for acetone in the case of CCSD and DFT. Following this, CPP-DFT is considered to be a viable option for the calculation of X-ray absorption spectra of larger {pi}-conjugated systems, and CC2 is deemed applicable for chemical shifts but not for studies of fine structure features. The CCSD method as well as the more approximate CC2 method are shown to yield spectral features relating to {pi}*-resonances in good agreement with experiment, not only for the aforementioned molecules but also for ethene, cis-1,2-difluoroethene, and tetrafluoroethene. The STEX approach is shown to underestimate {pi}*-peak separations due to spectral compressions, a characteristic which is inherent to this method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Demonstrating 1 nm-oxide-equivalent-thickness HfO{sub 2}/InSb structure with unpinning Fermi level and low gate leakage current density

In this work, the band alignment, interface, and electrical characteristics of HfO{sub 2}/InSb metal-oxide-semiconductor structure have been investigated. By using x-ray photoelectron spectroscopy analysis, the conduction band offset of 1.78 ± 0.1 eV and valence band offset of 3.35 ± 0.1 eV have been extracted. The transmission electron microscopy analysis has shown that HfO{sub 2} layer would be a good diffusion barrier for InSb. As a result, 1 nm equivalent-oxide-thickness in the 4 nm HfO{sub 2}/InSb structure has been demonstrated with unpinning Fermi level and low leakage current of 10{sup −4} A/cm{sup −2}. The D{sub it} value of smaller than 10{sup 12} eV{sup −1}cm{sup −2} has been obtained using conduction method.

36 MATERIALS SCIENCE↗

Modeling and Numerical Simulation of Microwave Pulse Propagation in Air Breakdown Environment

Numerical simulation is used to investigate the extent of the electron density at a distant altitude location which can be generated by a high-power ground-transmitted microwave pulse. This is done by varying the power, width, shape, and carrier frequency of the pulse. The results show that once the breakdown threshold field is exceeded in the region below the desired altitude location, electron density starts to build up in that region through cascading breakdown. The generated plasma attenuates the pulse energy (tail erosion) and thus deteriorates the energy transmission to the destined altitude. The electron density saturates at a level limited by the pulse width and the tail erosion process. As the pulse continues to travel upward, though the breakdown threshold field of the background air decreases, the pulse energy (width) is reduced more severely by the tail erosion process. Thus, the electron density grows more quickly at the higher altitude, but saturates at a lower level. Consequently, the maximum electron density produced by a single pulse at 50 km altitude, for instance, is limited to a value below 10(exp 6) cm(exp -3). Three different approaches are examined to determine if the ionization at the destined location can be improved: a repetitive pulse approach, a focused pulse approach, and two intersecting beams. Only the intersecting beam approach is found to be practical for generating the desired density level.

Kuo, S. P.↗

A quantum relaxation-time approximation for finite fermion systems

We propose a relaxation time approximation for the description of the dynamics of strongly excited fermion systems. Our approach is based on time-dependent density functional theory at the level of the local density approximation. This mean-field picture is augmented by collisional correlations handled in relaxation time approximation which is inspired from the corresponding semi-classical picture. The method involves the estimate of microscopic relaxation rates/times which is presently taken from the well established semi-classical experience. The relaxation time approximation implies evaluation of the instantaneous equilibrium state towards which the dynamical state is progressively driven at the pace of the microscopic relaxation time. As test case, we consider Na clusters of various sizes excited either by a swift ion projectile or by a short and intense laser pulse, driven in various dynamical regimes ranging from linear to strongly non-linear reactions. We observe a strong effect of dissipation on sensitive observables such as net ionization and angular distributions of emitted electrons. The effect is especially large for moderate excitations where typical relaxation/dissipation time scales efficiently compete with ionization for dissipating the available excitation energy. Technical details on the actual procedure to implement a working recipe of such a quantum relaxation approximation are given in appendices for completeness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A liquid hydrogen target for the MUSE experiment at PSI

A 280 ml liquid hydrogen target has been constructed and tested here for the MUSE experiment at PSI to investigate the proton charge radius via simultaneous measurement of elastic muon–proton and elastic electron–proton scattering. To control systematic uncertainties at a sub-percent level, strong constraints were put on the amount of material surrounding the target and on its temperature stability. The target system was successfully operated during a commissioning run at PSI at the end of 2018. The target temperature was stable at the 0.01 K level. This indicates a density stability at the 0.02% level, which is about a factor of ten better than required.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Vibrational excitation of H2 in intense ultraviolet fluxes

The vibrational excitation of H2 in intense ultraviolet radiation fields is studied. The radiative cascade through bound levels of the ground electronic state, following absorption of Lyman- and Werner-band photons, is modified to include effects of 'multiple pumping' and direct photodissociation from the high vibrational levels. Although the column densities in the excited vibrational levels produced by UV pumping appear too low to explain the recently observed Orion quadrupole emission lines, it is suggested that the far-red lines in the (3-0) and (4-0) bands, produced by UV pumping from O stars near dense molecular clouds, may be detectable.

Shull, J. M.↗

Density Functional Study of Perovskite Superconductor MgCNi{sub 3}

We here report the first principle density functional study of MgCNi{sub 3} which crystallize in cubic perovskite structure having critical transition temperature of 8 K. The interesting aspect of this compound is that in normal state it is non magnetic in nature despite conduction electrons in it are derived from partially filled Ni d states, which typically lead to ferromagnetism in metallic Ni and many Ni-based binary alloys. To investigate the detailed microscopic origin of the non magnetic nature we have done density functional based calculations on this compound. The lattice constant is calculated using minimum energy criteria from total energy versus lattice constant plot. By taking the calculated values of lattice constant we have done the precise calculations on the compound using Full Potential Linear Augmented Plane Wave (FP-LAPW) method implemented in ELK code. The electronic density of states is found spin degenerate that corresponds to a non-magnetic ground state. The density of states (DOS) at Fermi level, N(E{sub F}) is dominated by Ni-d states. The sharp peak observed just below Fermi level corresponds to van Hove singularity (vHs). The projected density of states (PDOS) suggests a strong hybridization of Ni-3d and C-2p states which is responsible for the observed non magnetic nature of MgCNi{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excited level populations and excitation kinetics of nonequilibrium ionizing argon discharge plasma of atmospheric pressure

Population densities of excited states of argon atoms are theoretically examined for ionizing argon plasma in a state of nonequilibrium under atmospheric pressure from the viewpoint of elementary processes with collisional radiative model. The dependence of excited state populations on the electron and gas temperatures is discussed. Two electron density regimes are found, which are distinguished by the population and depopulation mechanisms for the excited states in problem. When the electron impact excitation frequency for the population or depopulation is lower than the atomic impact one, the electron density of the plasma is considered as low to estimate the population and depopulation processes. Some remarkable characteristics of population and depopulation mechanisms are found for the low electron density atmospheric plasma, where thermal relaxation by atomic collisions becomes the predominant process within the group of close-energy states in the ionizing plasma of atmospheric pressure, and the excitation temperature is almost the same as the gas temperature. In addition to the collisional relaxation by argon atoms, electron impact excitation from the ground state is also an essential population mechanism. The ratios of population density of the levels pairs, between which exists a large energy gap, include information on the electron collisional kinetics. For high electron density, the effect of atomic collisional relaxation becomes weak. For this case, the excitation mechanism is explained as electron impact ladderlike excitation similar to low-pressure ionizing plasma, since the electron collision becomes the dominant process for the population and depopulation kinetics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Photodissociation resonances of jet-cooled NO{sub 2} at the dissociation threshold by CW-CRDS

Around 398 nm, the jet-cooled-spectrum of NO{sub 2} exhibits a well identified dissociation threshold (D{sub 0}). Combining the continuous-wave absorption-based cavity ringdown spectroscopy technique and laser induced fluorescence detection, an energy range of ∼25 cm{sup −1} is analyzed at high resolution around D{sub 0}. In addition to the usual molecular transitions to long-lived energy levels, ∼115 wider resonances are observed. The position, amplitude, and width of these resonances are determined. The resonance width spreads from ∼0.006 cm{sup −1} (i.e., ∼450 ps) to ∼0.7 cm{sup −1} (∼4 ps) with large fluctuations. The identification of at least two ranges of resonance width versus the excess energy can be associated with the opening of the dissociation channels NO{sub 2}→NO(X {sup 2}Π{sub 1/2}, v=0, J=1/2)+O({sup 3}P{sub 2}) and NO{sub 2}→NO(X {sup 2}Π{sub 1/2}, v=0, J=3/2)+O({sup 3}P{sub 2}). This analysis corroborates the existence of loose transition states close to the dissociation threshold as reported previously and in agreement with the phase space theory predictions as shown by Tsuchiya’s group [Miyawaki et al., J. Chem. Phys. 99, 254–264 (1993)]. The data are analyzed in the light of previously reported frequency- and time-resolved data to provide a robust determination of averaged unimolecular dissociation rate coefficients. The density of reactant levels deduced (ρ{sub reac} ∼ 11 levels/cm{sup −1}) is discussed versus the density of transitions, the density of resonances, and the density of vibronic levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Demonstration of rapid shutdown using large shattered deuterium pellet injection in DIII-D

A severe consequence of a disruption on large tokamaks such as ITER could be the generation of multi-megaelectronvolt electron beams that could damage the vacuum vessel and the structures of the machine if they hit the wall unmitigated. The mitigation of runaway electron beams is thus a key requirement for reliable operation of ITER. In order to achieve reliable disruption mitigation, a new fast shutdown technique has been developed: the injection of a large shattered cryogenic pellet in the plasma, which is expected to increase the electron density up to levels where the beam generation processes are mitigated by collisional losses. This technique has been implemented and tested for the first time ever on DIII-D. The first tests show evidence of an almost instantaneous deposition of more than 260 Pa m(3) of deuterium deep in the core. Record local densities during the thermal quench were observed for each injection with a very high reliability. Pellet mass and plasma energy content scans show an improvement of the assimilation of the particles for higher plasma energy and larger pellet mass.

Commaux, Nicolas JC↗

Defect-reduction mechanism for improving radiative efficiency in InGaN/GaN light-emitting diodes using InGaN underlayers

The influence of a dilute In{sub x}Ga{sub 1-x}N (x ∼ 0.03) underlayer (UL) grown below a single In{sub 0.16}Ga{sub 0.84}N quantum well (SQW), within a light-emitting diode (LED), on the radiative efficiency and deep level defect properties was studied using differential carrier lifetime (DCL) measurements and deep level optical spectroscopy (DLOS). DCL measurements found that inclusion of the UL significantly improved LED radiative efficiency. At low current densities, the non-radiative recombination rate of the LED with an UL was found to be 3.9 times lower than the LED without an UL, while the radiative recombination rates were nearly identical. This suggests that the improved radiative efficiency resulted from reduced non-radiative defect concentration within the SQW. DLOS measurement found the same type of defects in the InGaN SQWs with and without ULs. However, lighted capacitance-voltage measurements of the LEDs revealed a 3.4 times reduction in a SQW-related near-mid-gap defect state for the LED with an UL. Quantitative agreement in the reduction of both the non-radiative recombination rate (3.9×) and deep level density (3.4×) upon insertion of an UL corroborates deep level defect reduction as the mechanism for improved LED efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗