Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Technique for forming ITO films with a controlled refractive index

A new method for fabricating transparent conducting coatings based on indium-tin oxide (ITO) with a controlled refractive index is proposed. This method implies the successive deposition of material by electron-beam evaporation and magnetron sputtering. Sputtered coatings with different densities (and, correspondingly, different refractive indices) can be obtained by varying the ratio of the mass fractions of material deposited by different methods. As an example, films with effective refractive indices of 1.2, 1.4, and 1.7 in the wavelength range of 440–460 nm are fabricated. Two-layer ITO coatings with controlled refractive indices of the layers are also formed by the proposed method. Thus, multilayer transparent conducting coatings with desired optical parameters can be produced.

36 MATERIALS SCIENCE↗

Synergy on catalytic effect of Fe-Zr additives mixed in different proportions on the hydrogen desorption from MgH{sub 2}

Mg films with mixed Fe and Zr metallic additives were prepared by rf magnetron sputtering keeping the total metal content constant, about 7 at. %, and changing the [Fe]/[Zr] ratio. Isothermal hydrogen desorption curves showed that the kinetics depends on [Fe]/[Zr] ratio and is fastest when the [Fe]/[Zr] ratio is {approx}1.8. X-ray diffraction analysis revealed formation of Fe nanoclusters and Mg grain refinement. The improvement of the hydrogen desorption kinetics can be explained by the presence of atomically dispersed Zr and Fe nanoclusters acting as nucleation centers, as well as Mg grain refinement.

36 MATERIALS SCIENCE↗

Extracting the effective mass of electrons in transparent conductive oxide thin films using Seebeck coefficient

A method is proposed that combines Seebeck coefficient and carrier concentration to determine the electron effective mass of transparent conductive oxide (TCO) thin films. Experiments were conducted to test the validity of this approach on the transparent conductive Ga-doped ZnO thin films deposited by magnetron sputtering. An evident agreement of the calculated electron effective mass of the films is observed between the proposed approach and the previous studies. Besides, the optical carrier concentration and mobility derived from the calculated electron effective mass and spectroscopic ellipsometry using a complex dielectric function are consistent with those from direct Hall-effect measurement. The agreements suggest that Seebeck coefficient can serve as an alternative tool for extracting the effective mass of electrons in TCO films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly textured Sr, Nb co-doped BiFeO{sub 3} thin films grown on SrRuO{sub 3}/Si substrates by rf- sputtering

In this study, (011)-highly oriented Sr, Nb co-doped BiFeO{sub 3} (BFO) thin films were successfully grown on SrRuO{sub 3}/Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like grain growth with rms surface roughness values of {approx_equal}5.3 nm and average grain sizes of {approx_equal}65-70 nm for samples with different thicknesses. Remanent polarization values (2P{sub r}) of 54 {mu}C cm{sup -2} at room temperature were found for the BFO films with a ferroelectric behavior characteristic of an asymmetric device structure. Analysis of the leakage mechanisms for this structure in negative bias suggests Schottky injection and a dominant Poole-Frenkel trap-limited conduction at room temperature. Oxygen vacancies and Fe{sup 3+}/Fe{sup 2+} trap centers are consistent with the surface chemical bonding states analysis from x-ray photoelectron spectroscopy data. The (011)-BFO/SrRuO{sub 3}/Si film structure exhibits a strong magnetic interaction at the interface between the multiferroic film and the substrate layer where an enhanced ferromagnetic response at 5 K was observed. Zero-field cooled (ZFC) and field cooled (FC) magnetization curves of this film system revealed a possible spin glass behavior at spin freezing temperatures below 30 K depending on the BFO film thickness.

36 MATERIALS SCIENCE↗

Identification of B-K near edge x-ray absorption fine structure peaks of boron nitride thin films prepared by sputtering deposition

Four {pi}{sup *} resonance peaks were observed in the B-K near edge x-ray absorption fine structure spectra of boron nitride thin films prepared by magnetron sputtering. In the past, these peaks have been explained as the K-absorption of boron atoms, which are present in environment containing nitrogen vacancies, the number of which is 1-3 corresponding to the three peaks at higher photon energy. However, the authors found that there was a strong correlation between the intensities of these three peaks and that of O-K absorption after wide range scanning and simultaneous measurement of nitrogen and oxygen K-absorptions of the BN films. Therefore, the authors conclude that these three peaks at the higher energy side correspond to boron atoms bound to one-to-three oxygen atoms instead of three nitrogen atoms surrounding the boron atom in the h-BN structure. The result of the first-principles calculation with a simple cluster model supported the validity of this explanation.

36 MATERIALS SCIENCE↗

High quality ZnO:Al transparent conducting oxide films synthesized by pulsed filtered cathodic arc deposition

Aluminum-doped zinc oxide, ZnO:Al or AZO, is a well-known n-type transparent conducting oxide with great potential in a number of applications currently dominated by indium tin oxide (ITO). In this study, the optical and electrical properties of AZO thin films deposited on glass and silicon by pulsed filtered cathodic arc deposition are systematically studied. In contrast to magnetron sputtering, this technique does not produce energetic negative ions, and therefore ion damage can be minimized. The quality of the AZO films strongly depends on the growth temperature while only marginal improvements are obtained with post-deposition annealing. The best films, grown at a temperature of about 200?C, have resistivities in the low to mid 10-4 Omega cm range with a transmittance better than 85percent in the visible part of the spectrum. It is remarkable that relatively good films of small thickness (60 nm) can be fabricated using this method.

36 MATERIALS SCIENCE↗

Effect of target-substrate distance on properties of flexible InZnSnO films grown by linear facing target sputtering

The authors have investigated the effect of target-to-substrate distance (TSD) on the electrical, optical, and structural properties of flexible InZnSnO (IZTO) films grown on polyethylene terephthalate substrates using linear facing target sputtering (LFTS) at room temperature. The electrical and optical properties of IZTO film grown by LFTS were significantly influenced by TSD while the structural and surface properties of IZTO film were not affected by TSD, unlike conventional magnetron sputtering. Regardless of TSD, all IZTO film showed completely amorphous structure with very low root mean square roughness of 0.33 nm, due to the low kinetic energy of sputtered IZTO atoms and a substrate position that did not directly face the targets. Based on the figure of merit value, the optimized TSD for deposition of flexible IZTO films is 2.5 cm. At optimized conditions, the IZTO film showed a sheet resistance of 23.1 {Omega}/sq and an optical transmittance of 80%.

36 MATERIALS SCIENCE↗

Temperature and bias-voltage dependence of atomic-layer-deposited HfO{sub 2}-based magnetic tunnel junctions

Magnetic tunnel junctions with HfO{sub 2} tunnel barriers were prepared through a combination of magnetron sputtering and atomic layer deposition. We investigated the tunneling transport behavior, including the tunnel magnetoresistance ratio and the current-voltage characteristics between room temperature and 2 K. Here, we achieved a tunneling magneto resistance ratio of 10.3% at room temperature and 19.3% at 2 K. Furthermore, we studied the bias-voltage and temperature dependencies and compared the results with those of commonly used alumina- and magnesia-based magnetic tunnel junctions. We observed a polycrystalline/amorphous electrode-barrier system via high-resolution transmission electron microscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable giant magnetic anisotropy in amorphous SmCo thin films

SmCo thin films have been grown by magnetron sputtering at room temperature with a composition of 2-35 at. % Sm. Films with 5 at. % or higher Sm are amorphous and smooth. A giant tunable uniaxial in-plane magnetic anisotropy is induced in the films which peaks in the composition range 11-22 at. % Sm. This cross-over behavior is not due to changes in the atomic moments but rather the local configuration changes. The excellent layer perfection combined with highly tunable magnetic properties make these films important for spintronics applications.

36 MATERIALS SCIENCE↗

In-situ x-ray diffraction study of the growth of highly strained epitaxial BaTiO{sub 3} thin films

In-situ synchrotron x-ray diffraction was performed during the growth of BaTiO{sub 3} thin films on SrTiO{sub 3} substrates using both off-axis RF magnetron sputtering and pulsed laser deposition techniques. It was found that the films were ferroelectric during the growth process, and the presence or absence of a bottom SrRuO{sub 3} electrode played an important role in the growth of the films. Pulsed laser deposited films on SrRuO{sub 3} displayed an anomalously high tetragonality and unit volume, which may be connected to the previously predicted negative pressure phase of BaTiO{sub 3}.

36 MATERIALS SCIENCE↗

Direct synthesis of large size ferromagnetic SmCo{sub 5} nanoparticles by a gas-phase condensation method

Ferromagnetic SmCo{sub 5} nanoparticles with large size have been directly synthesized by a magnetron-sputtering-based gas-phase condensation method. Based on this method, we studied the effect of thermodynamic environment for the growth of SmCo{sub 5} nanoparticles. It was found that the well-crystallized SmCo{sub 5} nanoparticle tends to form a hexagonal disk shape with its easy axis perpendicular to the disk plane. More importantly, under the condition of high sputtering current, well-crystallized nanoparticles were found to be formed through a three-stage growth process: aggregation, coalescence, and second crystallization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ferromagnetism and ferroelectricity in epitaxial BiMnO{sub 3} ultra-thin films

We studied the ferroelectric and ferromagnetic properties of compressive strained and unstrained BiMnO{sub 3} thin films grown by rf-magnetron sputtering. BiMnO{sub 3} samples exhibit a two-dimensional cube-on-cube growth mode and a pseudo-cubic structure up to a thickness of 15 nm and of 25 nm when deposited on (001) SrTiO{sub 3} and (110) DyScO{sub 3}, respectively. Above these thicknesses, we observe a switching to a three-dimensional island growth mode and a simultaneous structural change to a (00l) oriented monoclinic unit cell. While ferromagnetism is observed below a T{sub C} ≈ 100 K for all samples, signatures of room temperature ferroelectricity were found only in the pseudo-cubic ultra-thin films, indicating a correlation between electronic and structural orders.

36 MATERIALS SCIENCE↗

Liquid-Phase Surface Alloying of Copper with Stainless Steel Using Low-Energy, High-Current Electron Beam

The paper deals with the formation of the stainless steel-copper surface alloy which occurs during the single vacuum cycle. Deposition of the stainless steel film onto a copper substrate is performed via successive magnetron sputtering followed by its liquid-phase mixing with copper using the low-energy, high-current electron beam of microsecond length. Numerical calculations are used to identify the optimum irradiation modes for the surface alloying. It is found that the optimum irradiation modes provide the homogeneous surface alloying, and the copper concentration in the obtained layer increases with the increase in energy density of the low-energy, high-current electron beam. The formation of the stainless steel-copper surface alloy increases the wear resistance of copper specimens by 7.5 times as compared to the original specimens. In addition, it is ascertained that the wear resistance of the surface alloy exceeds that of the common film coating (1 μm) more than 5 times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Antibacterial properties and cytocompatibility of tantalum oxide coatings with different silver content

Tantalum (Ta) oxides and their coatings have been proved to increase their applications in the biomedical fields by improving osseointegration and wear resistance. In this study, Ta oxide coatings containing different proportions of Ag are deposited on SS304 materials. A twin-gun magnetron sputtering system is used to deposit the tantalum oxide-Ag coating. In this study, Staphylococcus aureus, which exhibits physiological commensalism on the human skin, nares, and mucosal and oral areas, is chosen as the model for in vitro antibacterial analyses via a fluorescence staining method using Syto9. The cytocompatibility and adhesive morphology of human skin fibroblast cells (CCD-966SK) on the coatings are also determined by using the microculture tetrazolium assay. This study shows that Ta{sub 2}O{sub 5} and Ta{sub 2}O{sub 5}-Ag coatings with 12.5 at. % of Ag exhibit improved antibacterial effects against S. aureus and have good skin fibroblast cell cellular biocompatibility.

36 MATERIALS SCIENCE↗

Influence of N{sup +} ions on bandgap and electrical resistivity of TiN thin films

In the present work, nitrogen ions are embedded into Ti thin films (200 nm) using low energy ion beam implantation (70 keV) by varying ions fluence from 4×10{sup 15} ions/cm{sup 2} to 2×10{sup 16} ions/cm{sup 2}. For this, Ti films were grown using DC magnetron sputtering in Ar environment (power 200 W). TiN films were then characterized using versatile techniques for estimating the band gap and electrical resistivity. X-ray diffraction pattern shows shift in peaks towards higher angle with increase in nitrogen fluence that confirms the introduction of strain in Ti films. UV-Vis spectra show that band gap is reduced from 3.75 eV to 1.7 eV with increase in fluence from 4×10{sup 15} ions/cm{sup 2} to 2×10{sup 16} ions/cm{sup 2}. Furthermore, electrical resistivity also decreases from 2.67×10{sup −4} Ω.cm to 2.31×10{sup −4} Ωcm with nitrogen ion fluence. Based on these results, it can be inferred that ion implantation is an effective approach for uniform distribution of N ions in host matrix and tuning of optical and electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of RF power on structural and magnetic properties of La doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films

Effect of RF power on structural and magnetic properties of lanthanum (La{sup 3+}) doped Bi{sub 2}Fe{sub 4}O{sub 9} thin films grown on p-Si substrates by radio frequency (RF) magnetron sputtering has studied in this investigation. It is observed that the sputtering power affects the crystalline nature and magnetic properties of grown thin films. X-ray diffraction and Raman spectrum confirms that the Bi{sub 2}Fe{sub 4}O{sub 9} (BFO) thin films were crystallized well with orthorhombic structure. The BFO thin films which was prepared at sputtering power of 100 W have good crystallinity than those prepared at 40 W. The magnetic properties are investigated by vibrating sample magnetometer. The magnetic hysteresis perceptive loop shows that the anti-ferromagnetic behavior of the sample at room temperature. These results confirms that the crystallinity and magnetic properties of the BFO thin films were enhanced at the higher sputtering power (100 W).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High upper critical field in disordered niobium nitride superconductor

Superconducting Niobium Nitride thin films have been deposited on glass, aluminum nitride buffered glass, and oxidized silicon substrates by reactive DC magnetron sputtering at ambient substrate temperatures. The crystal structure of these thin films has been determined to be cubic fcc B1 structure by Glancing Incidence X-Ray Diffraction analysis. The superconducting transition temperatures of the thin films were measured to be greater than 11.6 K with a maximum of 13.4 K. The negative temperature coefficient of resistance observed in these thin films indicates the presence of disorder. Magneto-resistance measurements have been carried out on these thin films patterned into standard four probe geometry upto a maximum magnetic field of 12 T for two films and upto 15 T for the other two films. The dependence of transition temperature on the applied field is analyzed to estimate the upper critical field. The upper critical field for most of the films was estimated to exceed 35 T, while one of the most disordered films had an estimated upper critical field greater than 70 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ti seed layers on structure of self-organized epitaxial face-centered-cubic-Ag(001) oriented nanodots

The influence of Ti seed layers on the structure of self-organized Ag nanodots, obtained with a Ti seed-layer-assisted thermal agglomeration method, has been investigated. The samples were grown on MgO(001) single crystal substrates by RF magnetron sputter deposition. The samples were deposited at room temperature and post-annealed at 350 °C for 4 h while maintaining the chamber vacuum conditions. The results of atomic force microscopy (AFM) observations indicated that the insertion of the Ti seed layer (0.6–5.0 nm) between the MgO substrate and Ag layer promotes the agglomeration process, forming the nanodot array. Comparisons between the AFM images revealed that the size of the Ag nanodots was increased with an increase in the Ti seed layer thickness. The atomic concentration of the film surface was confirmed by X-ray photoelectron spectroscopy (XPS). The XPS result suggested that the nanodot surface mainly consisted of Ag. Moreover, X-ray diffraction results proved that the initial deposition of the Ti seed layer (0.6–5.0 nm) onto MgO(001) prior to the Ag deposition yielded high-quality fcc-Ag(001) oriented epitaxial nanodots. The optical absorbance spectra of the fabricated Ag nanodots with various Ti seed layer thicknesses were obtained in the visible light range.

36 MATERIALS SCIENCE↗