Search NASA⌕ Search

SEARCH · Search NASA

Results for “Model validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Detailed characterization of runaway electron driven whistler waves in low-density DIII-D discharges

RE-driven whistler waves during quiescent DIII-D shots have been investigated further. The waves are confirmed to be mostly perpendicularly propagating and are observed for the first time with frequencies up to 700 MHz. Phase-spectral analysis has been used to infer their toroidal mode numbers, n, which are expected to scale with the wavenumber, k, of the mode. Though we derive a theoretical scaling of k ≈ 4n, the measured mode numbers are found to exhibit a very weak dependence on k. In addition, increases in synchrotron emission have been found to consistently lag whistler wave bursts by roughly 3–5 ms, suggesting the waves are causing pitch-angle scattering, since the emitted synchrotron radiation is a strong function of the REs' perpendicular energy. The stronger the wave bursts, the greater the subsequent increase in synchrotron emission. A predator-prey model is used to describe these nonlinear wave-particle interactions, from which the wave damping rates and the loss parameter can be inferred. The damping rates are found to be of the order of (1.6 ± 0.8) × 10 4 /s, and the unitless loss parameter is found to be approximately 2, suggesting that the loss mechanism is diffusive. These observations will serve to validate models of RE-driven waves in tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Update on the Investigation of Commercial Drying Cycles Using the Advanced Drying Cycle Simulator

The purpose of this report is to document updates on the apparatus to simulate commercial vacuum drying procedures at the Nuclear Energy Work Complex at Sandia National Laboratories. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system during subsequent storage and disposal. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates well-designed investigations of drying process efficacy and water retention. Scaled tests that incorporate relevant physics and well-controlled boundary conditions are essential to provide insight and guidance to the simulation of prototypic systems undergoing drying processes. This report documents a new test apparatus, the Advanced Drying Cycle Simulator (ADCS). This apparatus was built to simulate commercial drying procedures and quantify the amount of residual water remaining in a pressurized water reactor (PWR) fuel assembly after drying. The ADCS was constructed with a prototypic 17×17 PWR fuel skeleton and waterproof heater rods to simulate decay heat. These waterproof heaters are the next generation design to heater rods developed and tested at Sandia National Laboratories in FY20. This report describes the ADCS vessel build that was completed late in FY22, including the receipt of the prototypic length waterproof heater rods and construction of the fuel basket and the pressure vessel components. In addition, installations of thermocouples, emissivity coupons, pressure and vacuum lines, pressure transducers, and electrical connections were completed. Preliminary power functionality testing was conducted to demonstrate the capabilities of the ADCS. In FY23, a test plan for the ADCS will be developed to implement a drying procedure based on measurements from the process used for the High Burnup Demonstration Project. While applying power to the simulated fuel rods, this procedure is expected to consist of filling the ADCS vessel with water, draining the water with applied pressure and multiple helium blowdowns, evacuating additional water with a vacuum drying sequence at successively lower pressures, and backfilling the vessel with helium. Additional investigations are expected to feature failed fuel rod simulators with engineered cladding defects and guide tubes with obstructed dashpots to challenge the drying system with multiple water retention sites.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Preliminary Simulations of Commercial Drying Cycles Using the Advanced Drying Cycle Simulator

The purpose of this report is to document updates on the apparatus to simulate commercial vacuum drying procedures at the Nuclear Energy Work Complex at Sandia National Laboratories. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system during subsequent storage and disposal. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates well-designed investigations of drying process efficacy and water retention. Scaled tests that incorporate relevant physics and well-controlled boundary conditions are essential to provide insight and guidance to the simulation of prototypic systems undergoing drying processes. This report documents fiscal year 2023 (FY23) updates on the Advanced Drying Cycle Simulator (ADCS). This apparatus was built to simulate commercial drying procedures and quantify the amount of residual water remaining in a pressurized water reactor (PWR) fuel assembly after drying. The ADCS was constructed with a prototypic 17×17 PWR fuel skeleton and waterproof heater rods to simulate decay heat. These waterproof heaters are the next generation design to heater rods developed and tested at Sandia National Laboratories in FY20. In FY23, a series of four simulated commercial drying tests was completed. This report presents the temperature and pressure histories of the drying tests as well as axial temperature profiles that can be compared to data from the Electric Power Research Institute (EPRI) High Burnup Demonstration TN-32B cask. Water content measurements and dew point calculations from a Hiden Analytical HPR-30 mass spectrometer are also presented in this report. Due to familiarization with this first-of-a-kind system, refinements to equipment calibration and test procedures have been identified to better match commercial drying cycles for future simulated tests. However, the presented data demonstrate the successful construction and operation of a viable research platform for quantifying residual water content closely approaching that expected in dry storage canisters during commercial drying procedures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Commission < 5 µm spatial resolution x-ray imager for High Resolution Turbulence experiments

This report presents the successful development, commissioning, and deployment of the Scintillation-Based X-ray Imager (SBXI) for the High-Resolution Turbulence (HRT) campaign at the National Ignition Facility (NIF). The SBXI system was designed to overcome the spatial resolution and efficiency limitations of conventional x-ray imaging detectors. Through careful system engineering, rigorous laboratory characterization, and experimental validation at NIF, the SBXI has demonstrated spatial resolution at the object plane of 5 μm (±0.5 μm) and a detective quantum efficiency (DQE) of 34% at 7.2 keV, both of which surpass the requirements set by the campaign, and meeting the L2 milestone. The system’s deployment enables high-fidelity imaging of fine-scale hydrodynamic instabilities, directly supporting advanced turbulence model validation and future high energy density physics research.

42 ENGINEERING↗
DOE OSTI2024

Bi-fidelity variational auto-encoder for uncertainty quantification

Quantifying the uncertainty of quantities of interest (QoIs) from physical systems is a primary objective in model validation. However, achieving this goal entails balancing the need for computational efficiency with the requirement for numerical accuracy. To address this trade-off, we propose a novel bi-fidelity formulation of variational auto-encoders (BF-VAE) designed to estimate the uncertainty associated with a QoI from low-fidelity (LF) and high-fidelity (HF) samples of the QoI. Here, this model allows for the approximation of the statistics of the HF QoI by leveraging information derived from its LF counterpart. Specifically, we design a bi-fidelity auto-regressive model in the latent space which is integrated within the VAE’s probabilistic encoder–decoder structure. An effective algorithm is proposed to maximize the variational lower bound of the HF log-likelihood in the presence of limited HF data, resulting in the synthesis of HF realizations with a reduced computational cost. Additionally, we introduce the concept of the bi-fidelity information bottleneck (BF-IB) to provide an information-theoretic interpretation of the proposed BF-VAE model. Our numerical results demonstrate that the BF-VAE leads to considerably improved accuracy, as compared to a VAE trained using only HF data, when limited HF data is available.

42 ENGINEERING↗
DOE OSTI2017

A Mathematical Model for the Multiphase Transport and Reaction Kinetics in a Ladle with Bottom Powder Injection

A computation fluid dynamics-population balance model-simultaneous reaction model (CFD-PBM-SRM) coupled model has been proposed to study the multiphase flow behavior and refining reaction kinetics in a ladle with bottom powder injection, and some new and important phenomena and mechanisms are presented. For the multiphase flow behavior, the effects of bubbly plume flow, powder particle motion, particle-particle collision and growth, particle-bubble collision and adhesion, and powder particle removal into top slag are considered. For the reaction kinetics, the mechanisms of multicomponent simultaneous reactions, including Al, S, Si, Mn, Fe, and O, at the multi-interface, including top slag-liquid steel interface, air-liquid steel interface, powder droplet-liquid steel interface, and bubble-liquid steel interface, are presented, and the effect of sulfur solubility in the powder droplet on the desulfurization is also taken into account. Model validation is carried out using hot tests in a 2-t induction furnace with bottom powder injection. The result shows that the powder particles gradually disperse in the entire furnace; in the vicinity of the bottom slot plugs, the desulfurization product CaS is liquid phase, while in the upper region of the furnace, the desulfurization product CaS is solid phase. The predicted sulfur contents by the present model agree well with the measured data in the 2-t furnace with bottom powder injection.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Benchmarking and validation of global model code for negative hydrogen ion sources

Benchmarking and validation are prerequisites for using simulation codes as predictive tools. In this work, we have developed a Global Model for Negative Hydrogen Ion Source (GMNHIS) and performed benchmarking of the GMNHIS against another independently developed code, Global Enhanced Vibrational Kinetic Model (GEVKM). This is the first study to propose a quite comprehensive benchmarking test of this kind for models of negative hydrogen ion sources (NHIS), and excellent agreements have been achieved for collisional energy loss per electron-ion pair created, electron number density, electron temperature, densities of H$^{+}_{3}$ and H$^{+}_{2}$ ions, and densities of H(n = 1–3) atoms. Very small discrepancies in number densities of H - ions and H + ions, as well as the vibrational distribution function of hydrogen molecules, can be attributed to the differences in the chemical reactions datasets. The GEVKM includes additional chemical reactions that are more important at high pressures. Moreover, we validated the GMNHIS against experimental data obtained in an electron cyclotron resonance discharge used for H - production. The model qualitatively (and even quantitatively for certain conditions) reproduces the experimental H - number density. The H - number density as a function of pressure first increases at pressures below 1.6 Pa and then saturates for higher pressures. This dependence was analyzed by evaluating contributions from different reaction pathways to the creation and loss of the H - ions. The developed codes can be used for predicting the H - production, improving the performance of NHIS, and ultimately optimizing the parameters of negative ion beams for fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

A time-domain electromechanical co-simulation framework for power system transient analysis with retainment of user defined models

This paper proposes a time-domain electromechanical co-simulation framework to accomplish concurrent running of multiple simulators in order to preserve user-defined models and allow maximum simulation accuracy for power system transient analysis. Here, a middleware interface is developed to manage the interaction and synchronization of the multiple simulators via boundary model. Consequently, it eliminates the requirement of model conversion of each subsystem and thus ensure the user-defined models in each specific software are retained for entire system situational awareness. Preliminary testing results on 140-bus Northeastern Power Coordinating Council (NPCC) model validate the effectiveness and accuracy of the proposed framework for PSS/E and PSLF co-simulation.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2019

Thermal Modeling of the TN-32B Cask for the High Burnup Spent Fuel Data Project

This report describes thermal modeling done for the High Burnup Dry Storage Research Project that is being performed by the U.S. Department of Energy’s Spent Fuel and Waste Science and Technology (SFWST) research and development (R&D) program. The purpose of this project to investigate the performance of high-burnup spent nuclear fuel in dry storage. Part of this project is a demonstration test being performed with a storage module in the North Anna Nuclear Power Station’s Independent Spent Fuel Storage Installation (ISFSI). The storage module selected for this demonstration is an Orano TN-32B High Burnup cask (Fig. S-1) which has been loaded with fuel assemblies from the North Anna spent fuel pool. The main goals of this test are to provide confirmatory data for model validation and potential improvement, support license renewals and new licenses for ISFSIs, and support transportation licensing for high burnup spent nuclear fuel (EPRI 2014).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Boiling Closure Model Validation/Development Effort with TAMU Experimental Data

This report describes a model validation and developmental effort in INL based on the analysis of experimental data taken from TAMU subcooled flow boiling facility. This report first describes briefly the test loop, experimental strategy, measurement techniques, data quality achieved, and test boundary conditions. Then, two main topics are discussed based on the experimental observation, bubble departure frequency and sliding bubble characteristics. The comparison of experimental data with the prediction of bubble departure frequency models shows that the predictive capability of existing models depends strongly on flow conditions. Also, the best performance region of each bubble departure frequency model could be determined from this analysis. Another critical achievement through this study is that the limitation of existing CFD boiling models dealing with sliding bubble effect was clearly identified. Specifically, the experimental observation indicates that the wall area influenced by sliding bubbles is not just a function of bubble size, but also depends strongly on sliding bubble trajectory and sliding distance. As a result, the bubble influence factor ( K ) for the small size of sliding bubbles was often found substantially higher than those reported in literature. In this regard, an effort is currently being made in INL to develop a new model to predict the sliding bubble effect on wall heat transfer based on the insight achieved from TAMU subcooled flow boiling experiment.

42 ENGINEERING↗
DOE OSTI2016

Benchmark Progress towards TREAT M8CAL Core Loading to Support Validation of TREAT Operations

Benchmark experiment data is necessary to validate modeling and simulation activities to support Transient Reactor Experiment Test (TREAT) Facility restart and operations. Key measurements of interest include criticality, control rod worth, excess reactivity, and shutdown margin for varying core loading sizes. Benchmark evaluations are being developed according the guidelines provided in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook) that can also support advanced modeling and simulation activities, new experiment design for advanced reactors and accident tolerant fuel, and potential low-enriched uranium conversion of the TREAT reactor. This summary discusses development activities supporting a benchmark evaluation of the TREAT M8CAL core loading, which will be submitted for peer-review and publication in the IRPhEP Handbook with the identifier TREAT-FUND-RESR-002. Detailed models of TREAT were developed and evaluated to prepare benchmark models of the minimum critical mass configuration. Calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Discussion of results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Modeling Shock-Driven Reaction in Low-Density Non-energetic polymeric materials

Shock experiments on low density polyurethane foams reveal evidence of reaction at low impact pressures. However, these reaction thresholds are not evident over the low pressures reported for historical Hugoniot data of highly distended polyurethane at densities below 0.1 g/cc. To fill this gap, impact data for PMDI foam with a density of 0.087 g/cc were acquired for model validation. An equation of state (EOS) was developed to predict the shock response of these highly distended materials over the full range of impact conditions representing compaction of the inert material, low-pressure decomposition, and compression of the reaction products. A tabular SESAME EOS of the reaction products was generated using the JCZS database in the TIGER equilibrium code. In particular, the Arrhenius Burn EOS, a two-state model which transitions from an unreacted to a reacted state using Arrhenius kinetics, as implemented in the shock physics code CTH, was modified to include a statistical distribution of states. Hence, a single EOS is presented that predicts the onset to reaction due to shock loading in PMDI-based polyurethane foams. This methodology was also used to predict the anomalous compaction of PMDI foams over published data sets from 0.087 to 0.87 g/cc, and solid Polyurethane at a theoretical maximum density (TMD) of 1.264 g/cc. Likewise, similar modeling techniques were used to predict the performance of SX-358 foam, an RTV-based stress cushion material at a nominal density of 0.41 g/cc, and the matrix material, with properties similar to Sylgard, at 1.1 g/cc. At the start of this study, data were only available at a single impact condition below the threshold for reaction; hence, the decomposition of this material at higher pressures was revealed as a significant finding of this work. The decomposition of SX-358 at higher impact pressures to product species including solid, liquid, and gaseous molecules was estimated with thermochemical equilibrium calculations using TIGER. with thermochemical equilibrium calculations using TIGER. This modeling approach, developed for PMDI foam, was shown to predict gas gun data, acquired as part of this study, up to pressures of 14 GPa. Furthermore, additional phase transitions were predicted in the product species under shock compression. To date, this study is the first known to the authors that demonstrates and successfully predicts the decomposition of these low-density polymer-based foams using a single model applicable to a broad range of impact loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Mechanical performance of short models for MQXF, the Nb3Sn low-β quadrupole for the Hi-Lumi LHC

In the framework of the Hi-Lumi LHC Project, CERN and U.S. LARP are jointly developing MQXF, a 150-mm aperture high-field Nb3Sn quadrupole for the upgrade of the inner triplet of the low-beta interaction regions. The magnet is supported by a shell-based structure, providing the preload by means of bladder-key technology and differential thermal contraction of the various components. Two short models have been produced using the same cross section currently considered for the final magnet. The structures were preliminarily tested replacing the superconducting coils with blocks of aluminum. This procedure allows for model validation and calibration, and also to set performance goals for the real magnet. Strain gauges were used to monitor the behavior of the structure during assembly, cool down and also excitation in the case of the magnets. The various structures differ for the shell partitioning strategies adopted and for the presence of thick or thin laminations. This study presents the results obtained and discusses the mechanical performance of all the short models produced up to now.

43 PARTICLE ACCELERATORS↗
DOE OSTI2018

Big Area Additive Manufacturing (BAAM) Materials Development and Reinforcement with Advanced Composites

Additive manufacturing (AM) by extrusion deposition is rapidly developing as an energy efficient process that greatly reduces development time for new products including vehicle structures. Development of reinforced thermoplastic compounds that are specifically tailored to the AM process and possess the properties necessary for engineering structures is currently underway. This project focused on developing a fundamental understanding of printability by performing a number of polymer characterization tests, initial printability screenings, and basic mechanical property determinations for a number of compounds. Structural evaluations of more complex printed articles were also performed in order to build a database of mechanical performance for validation of structural simulations planned for Phase II. Included in the structural tests were components that were reinforced using a number of methods including over-wrapping with dry fabric and resin infusing to form an advanced composite having the shape of the 3D printed structure. The results indicate a number of factors that affect printability of materials, and initial structural analysis shows that the data generated will be useful for model validation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Downloadable Dynamometer Database (D3): Public Test Data on Advanced-Technology Vehicles

Access to high-quality, independent vehicle test data is critical to advancing energy-efficient transportation research. The Downloadable Dynamometer Database (D3) is a public repository of dynamometer test data on advanced-technology vehicles, generated at the Advanced Mobility Technology Laboratory (AMTL) at Argonne National Laboratory and hosted by the Transportation and Power Systems Division. The database has been made available to support researchers, students, and professionals engaged in energy-efficient vehicle research, development, and education. A wide range of vehicle categories has been tested (i.e., alternative fuel vehicles, conventional gasoline and diesel vehicles, all-electric vehicles, hybrid electric vehicles, and plug-in hybrid electric vehicles), as well as various drive cycles and test conditions documented in the accompanying D3 user presentation. Stakeholders can select a vehicle type, identify a vehicle of interest, and download the associated test data for use in their own analyses. Data downloaded from D3 must be accompanied by the required attribution: "This data is from the Downloadable Dynamometer Database and was generated at the Advanced Mobility Technology Laboratory (AMTL) at Argonne National Laboratory." These data are critical to vehicle modeling, validation, technology assessment, and educational use.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2016

Benchmark Development for TREAT Minimum Critical Mass Core Loading to Support Validation of TREAT Operations

Benchmark experiment data is necessary to validate modeling and simulation activities to support Transient Reactor Experiment Test (TREAT) Facility restart and operations. Key measurements of interest include criticality, control rod worth, excess reactivity, and shutdown margin for varying core loading sizes. Benchmark evaluations are being developed according the guidelines provided in the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook) that can also support advanced modeling and simulation activities, new experiment design for advanced reactors and accident tolerant fuel, and potential low-enriched uranium conversion of the TREAT reactor. This summary discusses development activities supporting a benchmark evaluation of the TREAT minimum critical mass core loading, which will be submitted for peer-review and publication in the IRPhEP Handbook with the identifier TREAT-FUND-RESR-001. Detailed models of TREAT were developed and evaluated to prepare benchmark models of the minimum critical mass configuration. Calculations were performed using MCNP6.1 with ENDF/B-VII.1 nuclear data libraries. Discussion of results.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2025

High-resolution leaf area index maps generated from unoccupied aerial system, Teller Mile 27, Seward Peninsula, Alaska

Leaf area index (LAI), a measure of the amount of one-side leaf area per ground unit, is an important indicator of plant carbon, energy, and water cycle. In the heterogeneous Arctic landscapes, it has been challenging to accurately measure LAI across species and space needed for Earth system model validation. Here, we use multispectral unoccupied aerial systems (UASs) to scale up and map leaf area index (LAI) , in a low-Arctic tundra landscape on the Seward Peninsula, Alaska. We linked previous published LAI measurements with high-resolution, UAS-collected multispectral data collected over the region of Next Generation Ecosystem Experiments in the Arctic (NGEE Arctic)’s Teller Mile Maker 27 site in 2022 to develop random forest (RF) machine learning models to predict and map LAI. 100 RF models were developed to account for uncertainties in ground LAI plot measurements and process scaling. This dataset includes a raster (*.tif) map of the mean LAI value of the 100 RF models, a raster (*.tif) map of the standard deviation of the RF-modeled LAI data, and a user guide (*.pdf).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Application of Machine Learning Techniques to an Agent-Based Model of Pantoea

Agent-based modeling (ABM) is a powerful simulation technique which describes a complex dynamic system based on its interacting constituent entities. While the flexibility of ABM enables broad application, the complexity of real-world models demands intensive computing resources and computational time; however, a metamodel may be constructed to gain insight at less computational expense. Here, we developed a model in NetLogo to describe the growth of a microbial population consisting of Pantoea . We applied 13 parameters that defined the model and actively changed seven of the parameters to modulate the evolution of the population curve in response to these changes. We efficiently performed more than 3,000 simulations using a Python wrapper, NL4Py . Upon evaluation of the correlation between the active parameters and outputs by random forest regression, we found that the parameters which define the depth of medium and glucose concentration affect the population curves significantly. Subsequently, we constructed a metamodel, a dense neural network, to predict the simulation outputs from the active parameters and found that it achieves high prediction accuracy, reaching an R 2 coefficient of determination value up to 0.92. Our approach of using a combination of ABM with random forest regression and neural network reduces the number of required ABM simulations. The simplified and refined metamodels may provide insights into the complex dynamic system before their transition to more sophisticated models that run on high-performance computing systems. The ultimate goal is to build a bridge between simulation and experiment, allowing model validation by comparing the simulated data to experimental data in microbiology.

59 BASIC BIOLOGICAL SCIENCES↗