Search NASA⌕ Search

SEARCH · Search NASA

Results for “Panel method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A panel analysis of groundwater use in California

We report groundwater is a relevant source of drinking and agricultural water in many regions of the world, but many aquifers have been unsustainably over-drafted and polluted. This has significant environmental, health, and economic implications. We rely on panel analysis, with small-sample corrections for cluster-robust variance estimation and hypothesis testing, to investigate the dynamics of groundwater extraction. We focus on California, yet our approach could be helpful to analyze the dynamics of groundwater extraction in other groundwater-reliant regions of the world. In California, over-reliance on groundwater has led to significant overdraft, affecting long-term water supply reliability and groundwater pumping costs. It further caused subsidence and infrastructure damage, harmed groundwater-dependent ecosystems, and threatened the sustainability of groundwater resources in the state. We use panel data of the 56 California Water Plan planning areas over the 1998–2015 period. We concentrate on agricultural and urban water use and the major water projects in the state, to provide a better understanding of the relationships between groundwater extraction and water use and supply. Results suggest that reducing agricultural water in Central California and urban water in Southern California could reduce groundwater extraction in these regions by approximately the same amount of the reduced water. Other opportunities to reduce the stress on the groundwater resources in the state are available for other regions, yet with lower benefits. Results also suggest that a decrease in deliveries from the Central Valley Project to the southern part of the Central Valley would increase groundwater extraction by approximately the same proportion. Changes in deliveries from the major water projects in the state, as well as from other sources of surface water, would also have some, yet lower impacts on groundwater extraction in the Central and Southern California.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Protein engineering of a ubiquitin-variant inhibitor of APC/C identifies a cryptic K48 ubiquitin chain binding site

Ubiquitin (Ub)-mediated proteolysis is a fundamental mechanism used by eukaryotic cells to maintain homeostasis and protein quality, and to control timing in biological processes. Two essential aspects of Ub regulation are conjugation through E1-E2-E3 enzymatic cascades and recognition by Ub-binding domains. An emerging theme in the Ub field is that these 2 properties are often amalgamated in conjugation enzymes. In addition to covalent thioester linkage to Ub’s C terminus for Ub transfer reactions, conjugation enzymes often bind noncovalently and weakly to Ub at “exosites.” However, identification of such sites is typically empirical and particularly challenging in large molecular machines. In this work, studying the 1.2-MDa E3 ligase anaphase-promoting complex/cyclosome (APC/C), which controls cell division and many aspects of neurobiology, we discover a method for identifying unexpected Ub-binding sites. Using a panel of Ub variants (UbVs), we identify a protein-based inhibitor that blocks Ub ligation to APC/C substrates in vitro and ex vivo. Biochemistry, NMR, and cryo-electron microscopy (cryo-EM) structurally define the UbV interaction, explain its inhibitory activity through binding the surface on the APC2 subunit that recruits the E2 enzyme UBE2C, and ultimately reveal that this APC2 surface is also a Ub-binding exosite with preference for K48-linked chains. The results provide a tool for probing APC/C activity, have implications for the coordination of K48-linked Ub chain binding by APC/C with the multistep process of substrate polyubiquitylation, and demonstrate the power of UbV technology for identifying cryptic Ub-binding sites within large multiprotein complexes.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1972

Pressure-fluctuation inputs and response of panels underlying attached and separated supersonic turbulent boundary layers

Results are presented for an investigation of surface pressure fluctuations and response of panels underlying attached and separated turbulent boundary layers and shock waves. Tests conducted at transonic and supersonic Mach numbers to 3.6 to study the pressure fields. Assorted fixed edge flat panels were tested at Mach numbers from 1.6 to 3.6 in attached and completely separated flow fields, and also in mixed flow with a step-induced shock wave oscillating on the panels. The surface pressure fluctuations are described in terms of broadband rms, spectral density, and spatial correlation information. The effectiveness of parameters for scaling the pressure fluctuations is also illustrated. Measurements of the amplitude and strain response of the panels are compared with response computations by the normal mode method of analysis.

Coe, C. F.↗
NASA NTRS1979

Computer programs for calculating pressure distributions including vortex effects on supersonic monoplane or cruciform wing-body-tail combinations with round or elliptical bodies

Computer programs are presented which are capable of calculating detailed aerodynamic loadings and pressure distributions acting on pitched and rolled supersonic missile configurations which utilize bodies of circular or elliptical cross sections. The applicable range of angle of attack is up to 20 deg, and the Mach number range is 1.3 to about 2.5. Effects of body and fin vortices are included in the methods, as well as arbitrary deflections of canard or fin panels.

Dillenius, M. F. E.↗
NASA NTRS1990

Multilevel decomposition approach to the preliminary sizing of a transport aircraft wing

A multilevel/multidisciplinary optimization scheme for sizing an aircraft wing structure is described. A methodology using nonlinear programming in application to a very large engineering problem is presented. This capability is due to the decomposition approach. Over 1300 design variables are considered for this nonlinear optimization task. In addition, a mathematical link is established coupling the detail of structural sizing to the overall system performance objective, such as fuel consumption. The scheme is implemented as a three level system analyzing aircraft mission performance at the top level, the total aircraft structure as the middle level, and individual stiffened wing skin cover panels at the bottom level. Numerical show effectiveness of the method and its good convergence characteristics.

Wrenn, Gregory A.↗
NASA NTRS1993

Transonic panel flutter

FEM is here used to ascertain the stability and aeroelastic response of thin, 2D panels subjected to Mach 0.8-2.5 flows. In the absence of shocks, it is found that the Euler equations used to represent the unsteady flowfield dynamics predict response behaviors resembling those obtained via potential flow methods. Where shocks do play a significant role in the overall motion of the panel, divergence and limit cycle flutter are observed. In the Mach 1.4-1.5 range, flutter involved the higher modes of the panel, tending toward possible chaotic motion.

Davis, Gary A.↗
NASA NTRS1995

Structural Analysis of Composite Test panels

An analytical study was conducted for a 1/4 scale model skin-stringer compression panel using STructural Analysis of General Shells (STAGS) code for finite element analysis. This was a study to investigate scaling methods for composite structures using reduced ply thicknesses for 1/2 and 1/4 scale models. A computer model for a curved panel in a pressure-box was also constructed in order to simulate test conditions in the pressure box test machine. The pressure box is a test facility at NASA Langley Research Center used to simulate flight conditions in fuselage panels. This model will be used to investigate modifications to the pressure-box for curved panels with different radii.

Berhan, Sean↗
NASA NTRS2000

NASA Animal Enclosure Module Mouse Odor Containment Study for STS-107 September 15, 1999;SJSU Odor Panel Data

Experiment #153 by Scott Brady is manifested for shuttle flight STS-107. This evaluation of space flight induced stress and its effects on neuronal plasticity will use 18 six month old C57Bl/6 male mice. A 21 day evaluation study was proposed to determine the length of time groups of 6, 9, or 12 mice could be housed in the Animal Enclosure Module (AEM) without odor breakthrough. This study was performed at NASA-Ames Research Center beginning on September 15, 1999. NASA personnel, were responsible for animal care, maintenance, facilities, hardware, etc. San Jose State personnel performed the odor panel evaluations and data reduction. We used similar procedures and methods for earlier tests evaluating female mice.

Holley, Daniel C.↗
NASA NTRS2006

An Analysis of Nondestructive Evaluation Techniques for Polymer Matrix Composite Sandwich Materials

Structural sandwich materials composed of triaxially braided polymer matrix composite material face sheets sandwiching a foam core are being utilized for applications including aerospace components and recreational equipment. Since full scale components are being made from these sandwich materials, it is necessary to develop proper inspection practices for their manufacture and in-field use. Specifically, nondestructive evaluation (NDE) techniques need to be investigated for analysis of components made from these materials. Hockey blades made from sandwich materials and a flat sandwich sample were examined with multiple NDE techniques including thermographic, radiographic, and shearographic methods to investigate damage induced in the blades and flat panel components. Hockey blades used during actual play and a flat polymer matrix composite sandwich sample with damage inserted into the foam core were investigated with each technique. NDE images from the samples were presented and discussed. Structural elements within each blade were observed with radiographic imaging. Damaged regions and some structural elements of the hockey blades were identified with thermographic imaging. Structural elements, damaged regions, and other material variations were detected in the hockey blades with shearography. Each technique s advantages and disadvantages were considered in making recommendations for inspection of components made from these types of materials.

Cosgriff, Laura M.↗
NASA NTRS2018

Aeroservoelastic Optimization under Stochastic Gust Constraints

This work considers the aeroservoelastic optimization of a highly flexible transport aircraft wingbox with several control surfaces distributed along the trailing edge. The steady deflections of the control surfaces are designed to alleviate static maneuver loads, while the unsteady deflections are designed to alleviate stochastic continuous gust disturbances. Spatially-detailed unsteady stochastic stress and panel buckling constraints are formulated via modal acceleration, and by methods to locate the most-probable failure point along an equal-probability hypersurface. For the case considered here, it is found that the inclusion of such gust constraints during optimization presents a sizable structural mass penalty. In some cases, this mass penalty can be completely recovered with controlled gust load alleviation.

Stanford, Bret K.↗
DOE OSTI2020

Demand Response Potential from the Bulk Grid Perspective

Gain insight from an exploration of the potential value of demand response (DR) in future power systems. Using hourly DR resource estimates by sub-sector, electrical end-use, and grid service, we incorporate virtual generator models of DR resources into large-scale production cost models, and analyze the grid-level impacts in terms of the ability of DR to reduce system costs and potentially help integrate renewables or reduce system emissions. Additionally, we examine the value of DR, its revenue, and how these change under different system conditions. In this panel session, we will describe our input data and modeling methods, provide an overview of the production cost models used, and summarize key results from analyses in Florida and the western United States. Findings include variations in DR value by end-use and geography, an ability to increase economic PV deployment potential in high penetration systems, and mixed emissions outcomes depending on system composition and fuel prices.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2014

Laser Ablation Cleaning of Self-Reacting Friction Stir Weld Seam Surfaces: A Preliminary Evaluation

Anodized aluminum panels were cleaned by three lasers at three separate sites with a view to determining whether more economical laser cleaning might supplant current manual cleaning methods for preparation of surfaces to be welded by the self-reacting friction stir process. Uncleaned panels yielded welds exhibiting residual oxide defect (ROD) and failing at very low stresses along the trace of the weld seam. Manually cleaned panels yielded welds without ROD; these welds failed at nominal stress levels along an angled fracture surface not following the weld seam trace. Laser cleaned panels yielded welds failing at intermediate stress levels. The inadequacy of the laser cleaning processes leaves questions: Was the anodized aluminum test too stringent to represent actual cleaning requirements? Were the wrong laser cleaning techniques/parameters used for the study? Is the laser cleaning mechanism inadequate for effective preweld surface cleaning?

Nunes, A. C., Jr.↗
NASA NTRS1990

Application of the TRANAIR rectangular grid approach to the aerodynamic analysis of complex configurations

A numerical method is described which uses a rectangular grid to solve the nonlinear full potential equation about complex configurations. The grid is locally refined to resolve high velocity gradients arising from leading edge expansions or shock waves. The grid penetrates the boundary (described by networks of quadrilateral panels) and is generated automatically. Discrete operators are constructed using the finite element method. The system of nonlinear discrete equations is solved iteratively using a Krylov subspace method preconditioned by an exterior Poisson solver and a direct sparse solver. The primary emphasis is to provide design engineers with an aerodynamic analysis tool (the TRANAIR code) which is accurate, reliable, economical, and flexible to use. Computational results for many interesting configurations are presented.

Johnson, Forrester T.↗
NASA NTRS2004

PETI-298 Prepared by Microwave Synthesis: Neat Resin and Composite Properties

PETI-298 is a high temperature/high performance matrix resin that is processable into composites by resin transfer molding (RTM), resin infusion and vacuum assisted RTM techniques. It is typically synthesized in a polar aprotic solvent from the reaction of an aromatic anhydride and a combination of diamines and endcapped with phenylethynylphthalic anhydride. Microwave synthesis of PETI-298 was investigated as a means to eliminate solvent and decrease reaction time. The monomers were manually mixed and placed in a microwave oven for various times to determine optimum reaction conditions. The synthetic process was subsequently scaled-up to 330g. Three batches were synthesized and combined to give 1 kg of material that was characterized for thermal and rheological properties and compared to PETI-298 prepared by the classic solution based synthetic method. The microwave synthesized PETI-298 was subsequently used to fabricate flat laminates on T650 carbon fabric by RTM. The composite panels were analyzed and mechanical properties determined and compared with those fabricated from PETI-298 prepared by the classic solution method. The microwave synthesis process and characterization of neat resin and carbon fiber reinforced composites fabricated by RTM will be presented. KEY WORDS: Resin Transfer Molding, High Temperature Polymers, Phenylethynyl Terminated Imides, Microwave Synthesis

Smith, Joseph G.↗
NASA NTRS1993

Geometrically nonlinear analysis of stiffened composite panels with various end-support conditions

Recent enhancements to the NLPAN computer code are presented. NLPAN is a finite strip method for the geometrically nonlinear static analysis of prismatic composite structures subjected to in-plane and pressure loading. Refinements to the original approach of NLPAN are noted, and the modifications necessary to model clamped ends, eccentrically loaded ends, and ends with rotationally elastic support are discussed. Analytical predictions for axially loaded stiffened panels with various types of end support are compared with experimental measurements. Overall there is good agreement between analytical results and test results. The method is successful in modelling key mechanisms which can cause elastic collapse.

Stoll, Frederick↗
NASA NTRS1996

Thermal and Mechanical Buckling Analysis of Hypersonic Aircraft Hat-Stiffened Panels With Varying Face Sheet Geometry and Fiber Orientation

Mechanical and thermal buckling behavior of monolithic and metal-matrix composite hat-stiffened panels were investigated. The panels have three types of face-sheet geometry: Flat face sheet, microdented face sheet, and microbulged face sheet. The metal-matrix composite panels have three types of face-sheet layups, each of which is combined with various types of hat composite layups. Finite-element method was used in the eigenvalue extractions for both mechanical and thermal buckling. The thermal buckling analysis required both eigenvalue and material property iterations. Graphical methods of the dual iterations are shown. The mechanical and thermal buckling strengths of the hat-stiffened panels with different face-sheet geometry are compared. It was found that by just microdenting or microbulging of the face sheet, the axial, shear, and thermal buckling strengths of both types of hat-stiffened panels could be enhanced considerably. This effect is more conspicuous for the monolithic panels. For the metal-matrix composite panels, the effect of fiber orientations on the panel buckling strengths was investigated in great detail, and various composite layup combinations offering, high panel buckling strengths are presented. The axial buckling strength of the metal-matrix panel was sensitive to the change of hat fiber orientation. However, the lateral, shear, and thermal buckling strengths were insensitive to the change of hat fiber orientation.

Ko, William L.↗
DOE OSTI2025

JGI Plant Transformation Workshop, May 20-21, 2025

Domestic biomass crops such as sorghum, switchgrass, Miscanthus, and poplar can provide United States industries with renewable feedstocks while also supporting low-input farming systems and strengthening supply chains for biofuels, biochemicals and biomaterials. The U.S. leads globally in biomass crop genomics, yet progress in engineering traits is constrained by slow, genotype-dependent transformation methods and lengthy Design-Build-Test-Learn (DBTL) cycles. At a May 2025 workshop, a panel of experts recommended establishing a DOE Plant Transformation Capability (PTC) to overcome these barriers. The PTC would unite two missions: advancing research to achieve genotype-independent, automated methods, and delivering scalable transformation services through a user-facility model. With expected gains of 10–100x in efficiency, including transformation and cost reduction, the PTC would accelerate the path from discovery to engineered plants, expand community access and training, and support downstream applications and workflows including field trials and regulatory navigation. By enabling rapid and predictable crop engineering, the PTC would strengthen U.S. supply chains, enhance industrial competitiveness, and ensure that DOE’s genomic investments deliver national impact.

09 BIOMASS FUELS↗
NASA NTRS1993

Caul and method for bonding and curing intricate composite structures

The invention disclosed here is a method for forming and curing an intricate structure of criss-crossing composite stringers and frames that are bonded to a skin panel. A structure constructed in accordance with the invention would be well-suited for use as a portion of an aircraft fuselage, a boat hull, or the like. The method is preferably practiced by applying uncured composite stringers to an uncured composite sheet panel. This is followed by placing cured frames crosswise over the stringers. The frames have openings at the locations where they intersect with the stringers which enables the frames to come into direct contact with the skin along most of their length. During the forming and curing process, the stringers are covered with a plurality of cauls, and the entire assembly of skin panel, stringers, frames and cauls is subjected to a vacuum bagging and curing process. The cauls serve to maintain both part shape and to control the flow of resin within the stringers as they are cured. Further, they probably eliminate the need for intermediate protective materials between the vacuum bag and the stringers.

Willden, Kurtis S.↗