Search NASA⌕ Search

SEARCH · Search NASA

Results for “Performance Tools”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Magnetic Properties of Vacancies and Doped Chromium in a ZnO Crystal

The electronic and magnetic properties of ZnO containing Cr doped atoms and Zn and O vacancies in its crystal structure are theoretically investigated. Calculations are performed using Atomistix Tool Kit and Vienna Ab-initio Simulation Package software implementing the electron density functional theory method with the Hubbard correction. It is shown that the magnetic moment of a defect supercell strongly depends on the impurity concentration and presence of vacancies. The doping of an oxygen atom increases the probability of zinc-vacancy formation.

36 MATERIALS SCIENCE↗

Elastic Bayesian Model Calibration

Functional data are ubiquitous in scientific modeling. For instance, quantities of interest are modeled as functions of time, space, energy, density, etc. Uncertainty quantification methods for computer models with functional response have resulted in tools for emulation, sensitivity analysis, and calibration that are widely used. However, many of these tools do not perform well when the computer model’s parameters control both the amplitude variation of the functional output and its alignment (or phase variation). This paper introduces a framework for Bayesian model calibration when the model responses are misaligned functional data. The approach generates two types of data out of the misaligned functional responses: (1) aligned functions so that the amplitude variation is isolated and (2) warping functions that isolate the phase variation. These two types of data are created for the computer simulation data (both of which may be emulated) and the experimental data. The calibration approach uses both types so that it seeks to match both the amplitude and phase of the experimental data. The framework is careful to respect constraints that arise, especially when modeling phase variation, and is framed in a way that it can be done with readily available calibration software. In conclusion, we demonstrate the techniques on two simulated data examples and on two dynamic material science problems: a strength model calibration using flyer plate experiments and an equation of state model calibration using experiments performed on the Sandia National Laboratories’ Z-machine.

97 MATHEMATICS AND COMPUTING↗

CGSim: A Simulation Framework for Large Scale Distributed Computing Environment

Large-scale distributed computing infrastructures such as the Worldwide LHC Computing Grid (WLCG) require comprehensive simulation tools for evaluating performance, testing new algorithms, and optimizing resource allocation strategies. However, existing simulators suffer from limited scalability, hardwired algorithms, lack of real-time monitoring, and inability to generate datasets suitable for modern machine learning approaches. We present CGSim, a simulation framework for large-scale distributed computing environments that addresses these limitations. Built upon the validated SimGrid simulation framework, CGSim provides high-level abstractions for modeling heterogeneous grid environments while maintaining accuracy and scalability. Key features include a modular plugin mechanism for testing custom workflow scheduling and data movement policies, interactive real-time visualization dashboards, and automatic generation of event-level datasets suitable for AI-assisted performance modeling. We demonstrate CGSim’s capabilities through a comprehensive evaluation using production ATLAS PanDA workloads, showing significant calibration accuracy improvements across WLCG computing sites. Scalability experiments show near-linear scaling for multi-site simulations, with distributed workloads achieving 6 × better performance compared to single-site execution. The framework enables researchers to simulate WLCG-scale infrastructures with hundreds of sites and thousands of concurrent jobs within practical time budget constraints on commodity hardware.

Vatsavai, Sairam Sri [Brookhaven National Laborato↗

Sierra Center of Excellence: Lessons Learned

The introduction of heterogeneous computing via GPUs from the Sierra architecture represented a significant shift in direction for computational science at Lawrence Livermore National Laboratory (LLNL), and therefore required significant preparation. Over the last five years, the Sierra Center of Excellence (CoE) has brought employees with specific expertise from IBM and NVIDIA together with LLNL in a concentrated effort to prepare applications, system software, and tools for the Sierra supercomputer. This article shares the process we applied for the CoE and documents lessons learned during the collaboration, with the hope that others will be able to learn from both our success and intermediate setbacks. We describe what we have found to work for the management of such a collaboration and best practices for algorithms and source code, system configuration and software stack, tools, and application performance.

97 MATHEMATICS AND COMPUTING↗

OpenDSS-wrapper (Distribution System Co-simulator with Distributed Energy Resource Controls)

Electric grid transformation with the proliferation of distributed energy resources (DER), such as solar photovoltaic (PV), wind, advanced energy storage technologies, and electric vehicles, and the growing use of communication technologies in both transmission and distribution systems are increasing the need to capture the interactions among these systems. Advanced modeling, control, and simulation tools that can perform co-simulation of electric power systems with other domains become indispensable to accurately model these interactions. To address this need, we have developed a codebase that integrates an electric power distribution system simulator, DER models, and DER controls. The codebase is based on OpenDSS, a distribution system simulator, and an existing open source co-simulation framework called HELICS. The contribution and uniqueness of the proposed codebase is that it tailors the generic HELICS framework specifically for distribution grid-related applications. The codebase includes an OpenDSS wrapper that controls the simulation, implements advanced DER controls, and extracts power flows, voltages, and other power system element information from the the distribution network modeled in OpenDSS. Sample HELICS federates, including a federate for OpenDSS, are provided that can communicate messages through the HELICS interface. Sample federates can be modified and additional HELICS federates can be added by the user depending on their use case requirements. SEE ALSO: https://github.com/NREL/dss-cosim

Blonsky, Michael↗

initAnalysis

A tool to quickly perform recon in the init process of a given firmware.

Craig, Chris↗

Genomad v1.0

Genomad aims to identify mobile genetic elements (namely, viruses and plasmids) from DNA sequence data. It uses a combination of marker gene identification and machine learning models to find likely virus/plasmid candidates in environmental DNA sequencing data. It has an improved classification performance over similar tools.

Camargo, Antonio↗

A consensus-based ensemble approach to improve transcriptome assembly

Systems-level analyses, such as differential gene expression analysis, co-expression analysis, and metabolic pathway reconstruction, depend on the accuracy of the transcriptome. Multiple tools exist to perform transcriptome assembly from RNAseq data. However, assembling high quality transcriptomes is still not a trivial problem. This is especially the case for non-model organisms where adequate reference genomes are often not available. Different methods produce different transcriptome models and there is no easy way to determine which are more accurate. Furthermore, having alternative-splicing events exacerbates such difficult assembly problems. While benchmarking transcriptome assemblies is critical, this is also not trivial due to the general lack of true reference transcriptomes. In this study, we first provide a pipeline to generate a set of the simulated benchmark transcriptome and corresponding RNAseq data. Using the simulated benchmarking datasets, we compared the performance of various transcriptome assembly approaches including both de novo and genome-guided methods. The results showed that the assembly performance deteriorates significantly when alternative transcripts (isoforms) exist or for genome-guided methods when the reference is not available from the same genome. To improve the transcriptome assembly performance, leveraging the overlapping predictions between different assemblies, we present a new consensus-based ensemble transcriptome assembly approach, ConSemble. Without using a reference genome, ConSemble using four de novo assemblers achieved an accuracy up to twice as high as any de novo assemblers we compared. When a reference genome is available, ConSemble using four genome-guided assemblies removed many incorrectly assembled contigs with minimal impact on correctly assembled contigs, achieving higher precision and accuracy than individual genome-guided methods. Furthermore, ConSemble using de novo assemblers matched or exceeded the best performing genome-guided assemblers even when the transcriptomes included isoforms. We thus demonstrated that the ConSemble consensus strategy both for de novo and genome-guided assemblers can improve transcriptome assembly. The RNAseq simulation pipeline, the benchmark transcriptome datasets, and the script to perform the ConSemble assembly are all freely available from: http://bioinfolab.unl.edu/emlab/consemble/.

59 BASIC BIOLOGICAL SCIENCES↗

Retroactive Generation of Covariance Matrix of Nuclear Model Parameters Using Marginalization Techniques

An uncertainty propagation methodology relying on marginalization techniques was recently developed to produce covariance matrices between existing model parameters involved in describing neutron-induced reactions. This work has been implemented in the nuclear data assimilation tool CONRAD. The performance of the code was demonstrated through simplified test cases based on a Reich-Moore description of the {sup 155}Gd(n,{gamma}) reaction. Results are compared with those produced via Monte Carlo techniques.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Preliminary Designs for Criticality Safety Benchmarks—Iron/Steel/Chromium Series

The nuclear criticality safety community uses critical benchmarks extensively when analyzing nuclear systems. Having benchmarks sensitive to important materials of interest helps to ensure safety and constrain results. Critical benchmarks are also invaluable to the nuclear data community, which uses these benchmarks as a check and measure of quality of nuclear data libraries. Additionally, integral benchmarks are often used to validate the performance of computational tools for simulating nuclear systems. Many integral benchmarks have been documented in the International Criticality Safety Benchmark Evaluation Project (ICSBEP) handbook, the International Reactor Physics Experiment Evaluation Project (IRPhEP) handbook, and the Shielding Integral Benchmark Archive Database (SINBAD). The National Criticality Experiments Research Center (NCERC), operated by Los Alamos National Laboratory, is the only general purpose critical experiments facility in the United States of America. NCERC regularly designs and executes critical experiments and other measurements useful to a wide variety of fields including nuclear criticality safety, commercial nuclear energy, nonproliferation, and nuclear data. NCERC has recently developed tools to visualize gaps and deficiencies in existing criticality benchmarks – this work is still ongoing. Through this work and other reviews, some high priority deficiencies have been identified. This paper aims to highlight three areas where additional critical benchmarks would be useful to the nuclear criticality safety community and various other groups. Additionally, NCERC is seeking feedback in regard to these proposed measurements to make sure they are as useful to as many communities as possible.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diffraction properties of cylindrically bent KAP crystals in energy range of 2.3–7.5 keV using synchrotron radiation

Verification of physics models and computer simulations are heavily reliant upon the accuracy of experimental measurements. Calibration of instrument responses becomes an important step to achieve this goal. This paper presents systematic studies of bent potassium acid phthalate (KAP) crystals using Lawrence Berkeley National Laboratories, Advanced Light Source, beamline 9.3.1 in the energy range of 2.3 to 7.5 keV. A set of KAP crystals, gradually bent from flat up to a 50.8 mm cylindrical curvature. The measured integrated reflectivity for this set of KAP crystals shows good agreement with the X-ray Oriented Program (XOP) calculations when adjusting the Debye–Waller temperature factor and using the multilamellar model in the calculations. Significant differences in rocking curve profiles were observed between experimental measurements and theory. A forward convolution model and software code were developed to include experimental parameters, allowing the investigation of the difference between measurements and calculations. After considering the experimental parameters, good agreements were obtained for the rocking curve profiles for all bending radii with a unique set of parameters. Our results show that XOP can be a useful and reliable tool to predict performance of cylindrically bent KAP crystals in this energy range.

Wu, Ming↗

Validation of the BERT Point Source Inversion Scheme Using the Joint Urban 2003 Tracer Experiment Dataset (Final Report)

A terrorist attack in a U.S. city utilizing biological weapons could have severe consequences. A biological agent could be aerosolized and emitted into the air in the middle of a city, invisibly traveling with the winds, and dosing an unknowing populace. The magnitude of the problem would only be revealed as sick people started arriving several days later at hospitals with symptoms, many already too ill to be saved. A national program has deployed a network of biological agent collectors in U.S. cities to provide early detection of a bio-weapon attack, thereby hastening medical intervention and potentially saving many thousands of lives. In fact, the most effective treatment takes place prior to infection or in its early stages and early warning might reduce the disease progression and, consequently, the possibility of an outbreak. If a biological attack were to occur in a city, one or more collectors may register hits with specific dosages and the city would be alerted that an attack had taken place. This piece of information alone, however, would not be enough to determine how serious the attack was, i.e., how much biological agent was released into the air and where the bio-plume traveled. The first responders and public health communities will want to know what regions were impacted, how many persons might get sick, which people most need medical supplies, and where to clean up. The law enforcement community will want to look for forensic evidence at the release location. The Bio-Agent Event Reconstruction Tool (BERT) has been developed in order to recreate what might have happened during an airborne biological agent attack based on biological agent collector measurements and wind collectors mounted around a city. The tool can be used to estimate possible release areas while eliminating other areas, and can estimate bounds on the amount of material released. The tool can then be used to project forward from the possible source areas to estimate potential hazard zones. Due to a unique source inversion technique - called the upwind collector footprint approach - the tool runs fast and the source regions can be determined in a few minutes. In this report, we provide an overview of the BERT framework, followed by a description of the source inversion technique. The Joint URBAN 2003 field experiment held in Oklahoma City that was used to validate BERT is then described. Subsequent sections describe the metrics used for evaluation, the comparison of the experimental data and BERT output, and under what conditions the BERT tool succeeds and performs poorly. Results are aggregated in different ways (e.g., daytime vs. nighttime releases, 1 vs. 2 vs. 3 hit collectors) to determine if BERT shows any systematic errors. Finally, recommendations are given for how to improve the code and procedures for optimizing performance in operational mode.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Beam Size Measurement by Optical Diffraction Radiation and Laser System for Compton Polarimeter

Beam diagnostics is an essential constituent of any accelerator, so that it is named as "organs of sense" or "eyes of the accelerator." Beam diagnostics is a rich field. A great variety of physical effects or physical principles are made use of in this field. Some devices are based on electro-magnetic influence by moving charges, such as faraday cups, beam transformers, pick-ups; Some are related to Coulomb interaction of charged particles with matter, such as scintillators, viewing screens, ionization chambers; Nuclear or elementary particle physics interactions happen in some other devices, like beam loss monitors, polarimeters, luminosity monitors; Some measure photons emitted by moving charges, such as transition radiation, synchrotron radiation monitors and diffraction radiation-which is the topic of the first part of this thesis; Also, some make use of interaction of particles with photons, such as laser wire and Compton polarimeters-which is the second part of my thesis. Diagnostics let us perceive what properties a beam has and how it behaves in a machine, give us guideline for commissioning, controlling the machine and indispensable parameters vital to physics experiments. In the next two decades, the research highlight will be colliders (TESLA, CLIC, JLC) and fourth-generation light sources (TESLA FEL, LCLS, Spring 8 FEL) based on linear accelerator. These machines require a new generation of accelerator with smaller beam, better stability and greater efficiency. Compared with those existing linear accelerators, the performance of next generation linear accelerator will be doubled in all aspects, such as 10 times smaller horizontal beam size, more than 10 times smaller vertical beam size and a few or more times higher peak power. Furthermore, some special positions in the accelerator have even more stringent requirements, such as the interaction point of colliders and wigglor of free electron lasers. Higher performance of these accelerators increases the difficulty of diagnostics. For most cases, intercepting measurements are no longer acceptable, and nonintercepting method like synchrotron radiation monitor can not be applied to linear accelerators. The development of accelerator technology asks for simutanous diagnostics innovations, to expand the performance of diagnostic tools to meet the requirements of the next generation accelerators. Diffraction radiation and inverse Compton scattering are two of the most promising techniques, their nonintercepting nature avoids perturbance to the beam and damage to the instrumentation. This thesis is divided into two parts, beam size measurement by optical diffraction radiation and Laser system for Compton polarimeter. Diffraction radiation, produced by the interaction between the electric field of charged particles and the target, is related to transition radiation. Even though the theory of diffraction radiation has been discussed since 1960s, there are only a few experimental studies in recent years. The successful beam size measurement by optical diffraction radiation at CEBAF machine is a milestone: First of all, we have successfully demonstrated diffraction radiation as an effective nonintercepting diagnostics; Secondly, the simple linear relationship between the diffraction radiation image size and the actual beam size improves the reliability of ODR measurements; And, we measured the polarized components of diffraction radiation for the first time and I analyzed the contribution from edge radiation to diffraction radiation.

43 PARTICLE ACCELERATORS↗

Host Event Based Network Monitoring

The purpose of INL’s research on this project is to demonstrate the feasibility of a host event based network monitoring tool and the effects on host performance. Current host based network monitoring tools work on polling which can miss activity if it occurs between polls. Instead of polling, a tool could be developed that makes use of event APIs in the operating system to receive asynchronous notifications of network activity. Analysis and logging of these events will allow the tool to construct the complete real-time and historical network configuration of the host while the tool is running. This research focused on three major operating systems commonly used by SCADA systems: Linux, WindowsXP, and Windows7. Windows 7 offers two paths that have minimal impact on the system and should be seriously considered. First is the new Windows Event Logging API, and, second, Windows 7 offers the ALE API within WFP. Any future work should focus on these methods.

24 POWER TRANSMISSION AND DISTRIBUTION↗

V&V Framework Part 1 Release

The objective of this document is to accurately predict, assess and optimize wind plant performance utilizing High Performance Modeling (HPC) tools developed in a community-based, open-source simulation environment to understand and accurately predict the fundamental physics and complex flows of the atmospheric boundary layer, interaction with the wind plant, as well as the response of individual turbines to the complex flows within that plant

54 ENVIRONMENTAL SCIENCES↗

Towards Accurate Application Characterization for Exascale (APEX)

Sandia National Laboratories has been engaged in hardware and software codesign activities for a number of years, indeed, it might be argued that prototyping of clusters as far back as the CPLANT machines and many large capability resources including ASCI Red and RedStorm were examples of codesigned solutions. As the research supporting our codesign activities has moved closer to investigating on-node runtime behavior a nature hunger has grown for detailed analysis of both hardware and algorithm performance from the perspective of low-level operations. The Application Characterization for Exascale (APEX) LDRD was a project conceived of addressing some of these concerns. Primarily the research was to intended to focus on generating accurate and reproducible low-level performance metrics using tools that could scale to production-class code bases. Along side this research was an advocacy and analysis role associated with evaluating tools for production use, working with leading industry vendors to develop and refine solutions required by our code teams and to directly engage with production code developers to form a context for the application analysis and a bridge to the research community within Sandia. On each of these accounts significant progress has been made, particularly, as this report will cover, in the low-level analysis of operations for important classes of algorithms. This report summarizes the development of a collection of tools under the APEX research program and leaves to other SAND and L2 milestone reports the description of codesign progress with Sandia’s production users/developers.

97 MATHEMATICS AND COMPUTING↗

Advanced Dynamically Adaptive Algorithms for Stochastic Simulations on Extreme Scales

The focus of the project is the development of mathematical methods and high-performance com- putational tools for stochastic simulations, with a particular emphasis on computations on extreme scales. The core of the project revolves around the design of highly e cient and scalable numer- ical algorithms that can adaptively and accurately, in high dimensional spaces, resolve stochastic problems with limited smoothness, even containing discontinuities.

97 MATHEMATICS AND COMPUTING↗

Final technical report for DE-SC00012633 AToM (Advanced Tokamak Modeling)

This final report for the AToM project documents contributions from University of California, San Diego researchers over the period of 9/1/2014 – 8/31/2017. The primary focus of these efforts was on performing validation studies of core tokamak transport models using the OMFIT framework, including development of OMFIT workflow scripts. Additional work was performed to develop tools for use of the nonlinear magnetohydrodynamics code NIMROD in OMFIT, and its use in the study of runaway electron dynamics in tokamak disruptions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗