Search NASA⌕ Search

SEARCH · Search NASA

Results for “Probabilistic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Towards a Probabilistic Preliminary Design Criterion for Buckling Critical Composite Shells

A probability-based analysis method for predicting buckling loads of compression-loaded laminated-composite shells is presented, and its potential as a basis for a new shell-stability design criterion is demonstrated and discussed. In particular, a database containing information about specimen geometry, material properties, and measured initial geometric imperfections for a selected group of laminated-composite cylindrical shells is used to calculate new buckling-load "knockdown factors". These knockdown factors are shown to be substantially improved, and hence much less conservative than the corresponding deterministic knockdown factors that are presently used by industry. The probability integral associated with the analysis is evaluated by using two methods; that is, by using the exact Monte Carlo method and by using an approximate First-Order Second- Moment method. A comparison of the results from these two methods indicates that the First-Order Second-Moment method yields results that are conservative for the shells considered. Furthermore, the results show that the improved, reliability-based knockdown factor presented always yields a safe estimate of the buckling load for the shells examined.

Arbocz, Johann↗
NASA NTRS2003

Upward Flammability Testing: A Probabilistic Measurement

Examination of NASA-STD-6001 Test 1 data suggests burn length outcome for a given environment has a large statistical variation from run to run. Large data sets show that burn length data form cumulative probability distribution curves, which describe a material's characteristic to burn in a specific environment, suggesting that the current practice of testing three samples at specific conditions is inadequate. Sufficient testing can establish material characteristics probability curves to provide the probability that a material will sustain a burn length of at least 15.24 cm (6.0 in.) or will sustain burning until all material is consumed. A simple pasdfail criterion may not be possible or practical. Future application of flammability data for some material classes may require the engineer to assess risk based on the probability of an occurrence and the probable outcome with different materials as characterized with cumulative burn length distributions for specific use conditions.

Davis, Samuel E.↗
NASA NTRS2003

A Probabilistic Approach to Technology Identification, Evaluation, and Selection for Affordable Transport Concepts

Most grant goals were accomplished over the course of the grant, albeit only partial success was achieved in applying ASDL s existing advanced design methods to HAVOC. The limited success in applying ASDL's advanced design methods occurred due to: fundamental 20 of 197 limitations in the RSM metamodeling process used; the highly computationally intensive nature of HAVOC as compared to many other advanced system synthesis and sizing codes; and the highly curved nature of low I(sub sp) rocket system spaces. These challenges encountered during the grant led to ongoing efforts in more efficient and robust sequential metamodeling/surrogate optimization based advanced design methods which are expected to overcome all of the challenges encountered with RSM during the grant. Other achievements over the course of the grant included the documentation of the existing HAVOC cost module and formulation of new cost estimation relationships in support of APS analysis of 3rd Gen RLV. Further achievements beyond the scope of the grant as originally defined were also achieved such as HAVOC code and portability improvements, historical propulsion performance and reliability regression relationships, and new visualization routines to vacilitate visualization of HAVOC DOE case file results.

Source record↗
NASA NTRS2004

Application of Probabilistic Risk Assessment (PRA) During Conceptual Design for the NASA Orbital Space Plane (OSP)

In order to meet the space transportation needs for a new century, America's National Aeronautics and Space Administration (NASA) has implemented an Integrated Space Transportation Plan to produce safe, economical, and reliable access to space. One near term objective of this initiative is the design and development of a next-generation vehicle and launch system that will transport crew and cargo to and from the International Space Station (ISS), the Orbital Space Plane (OSP). The OSP system is composed of a manned launch vehicle by an existing Evolved Expendable Launch Vehicle (EELV). The OSP will provide emergency crew rescue from the ISS by 2008, and provide crew and limited cargo transfer to and from the ISS by 2012. A key requirement is for the OSP to be safer and more reliable than the Soyuz and Space Shuttle, which currently provide these capabilities.

Rogers, James H.↗
NASA NTRS2004

The Application of Probabilistic Methods to the Mistuning Problem

FMM is a reduced order model for efficiently calculating the forced response of a mistuned bladed disk. FMM ID is a companion program which determines the mistuning in a particular rotor. Together, these methods provide a way to acquire data on the mistuning in a population of bladed disks, and then simulate the forced response of the fleet. This process is tested experimentally, and the simulated results are compared with laboratory measurements of a fleet of test rotors. The method is shown to work quite well. It is found that accuracy of the results depends on two factors: the quality of the statistical model used to characterize mistuning, and how sensitive the system is to errors in the statistical modeling.

Griffin, J. H.↗
NASA NTRS2005

Probabilistic Design of a Wind Tunnel Model to Match the Response of a Full-Scale Aircraft

approach is presented for carrying out the reliability-based design of a plate-like wing that is part of a wind tunnel model. The goal is to design the wind tunnel model to match the stiffness characteristics of the wing box of a flight vehicle while satisfying strength-based risk/reliability requirements that prevents damage to the wind tunnel model and fixtures. The flight vehicle is a modified F/A-18 aircraft. The design problem is solved using reliability-based optimization techniques. The objective function to be minimized is the difference between the displacements of the wind tunnel model and the corresponding displacements of the flight vehicle. The design variables control the thickness distribution of the wind tunnel model. Displacements of the wind tunnel model change with the thickness distribution, while displacements of the flight vehicle are a set of fixed data. The only constraint imposed is that the probability of failure is less than a specified value. Failure is assumed to occur if the stress caused by aerodynamic pressure loading is greater than the specified strength allowable. Two uncertain quantities are considered: the allowable stress and the thickness distribution of the wind tunnel model. Reliability is calculated using Monte Carlo simulation with response surfaces that provide approximate values of stresses. The response surface equations are, in turn, computed from finite element analyses of the wind tunnel model at specified design points. Because the response surface approximations were fit over a small region centered about the current design, the response surfaces were refit periodically as the design variables changed. Coarse-grained parallelism was used to simultaneously perform multiple finite element analyses. Studies carried out in this paper demonstrate that this scheme of using moving response surfaces and coarse-grained computational parallelism reduce the execution time of the Monte Carlo simulation enough to make the design problem tractable. The results of the reliability-based designs performed in this paper show that large decreases in the probability of stress-based failure can be realized with only small sacrifices in the ability of the wind tunnel model to represent the displacements of the full-scale vehicle.

Mason, Brian H.↗
NASA NTRS2005

Probabilistic Fracture Mechanics Analysis of the Orbiter's LH2 Feedline Flowliner

Work performed by Southwest Research Institute (SwRI) as part of an Independent Technical Assessment (ITA) for the NASA Engineering and Safety Center (NESC) is summarized. The ITA goal was to establish a flight rationale in light of a history of fatigue cracking due to flow induced vibrations in the feedline flowliners that supply liquid hydrogen to the space shuttle main engines. Prior deterministic analyses using worst-case assumptions predicted failure in a single flight. The current work formulated statistical models for dynamic loading and cryogenic fatigue crack growth properties, instead of using worst-case assumptions. Weight function solutions for bivariant stressing were developed to determine accurate crack "driving-forces". Monte Carlo simulations showed that low flowliner probabilities of failure (POF = 0.001 to 0.0001) are achievable, provided pre-flight inspections for cracks are performed with adequate probability of detection (POD)-specifically, 20/75 mils with 50%/99% POD. Measurements to confirm assumed POD curves are recommended. Since the computed POFs are very sensitive to the cyclic loads/stresses and the analysis of strain gage data revealed inconsistencies with the previous assumption of a single dominant vibrant mode, further work to reconcile this difference is recommended. It is possible that the unaccounted vibrational modes in the flight spectra could increase the computed POFs.

Bonacuse, Peter J.↗
NASA NTRS1999

Multidisciplinary Probabilistic Heat Transfer/Structural Analysis Code Developed: NESTEM

High-Speed Civil Transport (HSCT) engine combustor liners are subjected to complex thermal environments and have to endure these for thousands of hours with assured reliability. In the past, several deterministic analyses have been performed, including detailed heat transfer analyses to obtain thermal profiles and deterministic stress analyses to identify critical locations of high stresses. Actual rig tests also have been performed for segments by simulating these loading situations as closely as possible. However, it is well known that many uncertainties exist in loading (primarily thermal loads due to heat transfer), boundary conditions (end fixity unknowns), and material properties (moduli, thermal-expansion coefficients, and conductivities). The present in-house effort at the NASA Lewis Research Center is directed toward accounting for these in a formal way to assess the performance of liner components under complex and uncertain loading conditions as well as subject to other geometry- and material-related uncertainties.

Murthy, Pappu L. N.↗
NASA NTRS2001

Probabilistic Risk-Based Approach to Aeropropulsion System Assessment Developed

In an era of shrinking development budgets and resources, where there is also an emphasis on reducing the product development cycle, the role of system assessment, performed in the early stages of an engine development program, becomes very critical to the successful development of new aeropropulsion systems. A reliable system assessment not only helps to identify the best propulsion system concept among several candidates, it can also identify which technologies are worth pursuing. This is particularly important for advanced aeropropulsion technology development programs, which require an enormous amount of resources. In the current practice of deterministic, or point-design, approaches, the uncertainties of design variables are either unaccounted for or accounted for by safety factors. This could often result in an assessment with unknown and unquantifiable reliability. Consequently, it would fail to provide additional insight into the risks associated with the new technologies, which are often needed by decisionmakers to determine the feasibility and return-on-investment of a new aircraft engine.

Tong, Michael T.↗
NASA NTRS2004

Probabilistic Study Conducted on Sensor-Based Engine Life Calculation

Turbine engine life management is a very complicated process to ensure the safe operation of an engine subjected to complex usage. The challenge of life management is to find a reasonable compromise between the safe operation and the maximum usage of critical parts to reduce maintenance costs. The commonly used "cycle count" approach does not take the engine operation conditions into account, and it oversimplifies the calculation of the life usage. Because of the shortcomings, many engine components are regularly pulled for maintenance before their usable life is over. And, if an engine has been running regularly under more severe conditions, components might not be taken out of service before they exceed their designed risk of failure. The NASA Glenn Research Center and its industrial and academic partners have been using measurable parameters to improve engine life estimation. This study was based on the Monte Carlo simulation of 5000 typical flights under various operating conditions. First a closed-loop engine model was developed to simulate the engine operation across the mission profile and a thermomechanical fatigue (TMF) damage model was used to calculate the actual damage during takeoff, where the maximum TMF accumulates. Next, a Weibull distribution was used to estimate the implied probability of failure for a given accumulated cycle count. Monte Carlo simulations were then employed to find the profiles of the TMF damage under different operating assumptions including parameter uncertainties. Finally, probabilities of failure for different operating conditions were analyzed to demonstrate the importance of a sensor-based damage calculation in order to better manage the risk of failure and on-wing life.

Guo, Ten-Huei↗
NASA NTRS2005

Fundamental Mistuning Model for Probabilistic Analysis Studied Experimentally

The Fundamental Mistuning Model (FMM) is a reduced-order model for efficiently calculating the forced response of a mistuned bladed disk. FMM ID is a companion program that determines the mistuning in a particular rotor. Together, these methods provide a way to acquire mistuning data in a population of bladed disks and then simulate the forced response of the fleet. This process was tested experimentally at the NASA Glenn Research Center, and the simulated results were compared with laboratory measurements of a "fleet" of test rotors. The method was shown to work quite well. It was found that the accuracy of the results depends on two factors: (1) the quality of the statistical model used to characterize mistuning and (2) how sensitive the system is to errors in the statistical modeling.

Griffin, Jerry H.↗
NASA NTRS2005

NESTEM Probabilistic Analysis Used to Study Mistuned Bladed Disks and Blisks With Aerodynamic and Structural Coupling

This document summarizes the initial results from a research effort at the NASA Glenn Research Center on blisk and bladed disk mistuning, including both structural and aerodynamic coupling. The structural coupling model is based on the Fundamental Mistuning Model (FMM, developed by Feiner and Griffin). This effort extends the FMM technique to accept aerodynamic coupling coefficients from computational fluid dynamic codes. The model was applied to a representative modern front compressor stage. Flutter stability and forced response were determined with structural coupling only, with aerodynamic coupling only, and with both structural and aerodynamic coupling. Tuned, randomly mistuned, and near alternately mistuned rotors were considered.

Kielb, Robert E.↗
NASA NTRS2005

A First and Second Order Moment Approach to Probabilistic Control Synthesis

This paper presents a robust control design methodology based on the estimation of the first two order moments of the random variables and processes that describe the controlled response. Synthesis is performed by solving an multi-objective optimization problem where stability and performance requirements in time- and frequency domains are integrated. The use of the first two order moments allows for the efficient estimation of the cost function thus for a faster synthesis algorithm. While reliability requirements are taken into account by using bounds to failure probabilities, requirements related to undesirable variability are implemented by quantifying the concentration of the random outcome about a deterministic target. The Hammersley Sequence Sampling and the First- and Second-Moment- Second-Order approximations are used to estimate the moments, whose accuracy and associated computational complexity are compared numerically. Examples using output-feedback and full-state feedback with state estimation are used to demonstrate the ideas proposed.

Crespo, Luis G.↗
NASA NTRS2005

A Probabilistic Software System Attribute Acceptance Paradigm for COTS Software Evaluation

Standard software requirement formats are written from top-down perspectives only, that is, from an ideal notion of a client s needs. Despite the exactness of the standard format, software and system errors in designed systems have abounded. Bad and inadequate requirements have resulted in cost overruns, schedule slips and lost profitability. Commercial off-the-shelf (COTS) software components are even more troublesome than designed systems because they are often provided as is and subsequently delivered with unsubstantiated validation of described capabilities. For COTS software, there needs to be a way to express the client s software needs in a consistent and formal manner using software system attributes derived from software quality standards. Additionally, the format needs to be amenable to software evaluation processes that integrate observable evidence garnered from historical data. This paper presents a paradigm that effectively bridges the gap between what a client desires (top-down) and what has been demonstrated (bottom-up) for COTS software evaluation. The paradigm addresses the specification of needs before the software evaluation is performed and can be used to increase the shared understanding between clients and software evaluators about what is required and what is technically possible.

Morris, A. Terry↗
NASA NTRS2003

Probabilistic risk reduction

We present an integrated approach to risk assessment and risk mitigation that is well suited to planning the development of complex software systems.

risk requirements architectures↗