Search NASA⌕ Search

SEARCH · Search NASA

Results for “RESISTANCE DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Radiation-Induced Damage and Recovery of Ultra-Nanocrystalline Diamond: Toward Applications in Harsh Environments

Ultra-nanocrystalline diamond (UNCD) is increasingly being used in the fabrication of devices and coatings due to its excellent tribological properties, corrosion resistance, and biocompatibility. Here in this work, we study its response to irradiation with kiloelectronvolt electrons as a controlled model for extreme ionizing environments. Real time Raman spectroscopy reveals that the radiation-damage mechanism entails dehydrogenation of UNCD grain boundaries, and we show that the damage can be recovered by annealing at 883 K. Lastly, our results have significant practical implications for the implementation of UNCD in extreme environment applications, and indicate that the films can be used as radiation sensors.

36 MATERIALS SCIENCE↗

Critical role of oxide anchoring groups in organic electron transport layers for perovskite solar cell stability

Charge transport layers (CTLs) play a critical role in the performance and long-term stability of perovskite solar cells (PSCs) by facilitating efficient charge extraction and providing interfacial stabilization. For organic CTLs, different functional groups have been designed to modulate the interactions with the substrate. Anchoring groups are used to establish strong adhesion to transparent conductive oxides (TCOs) but are not routinely incorporated in organic CTL design. In this study, we investigate the influence of anchoring groups in organic electron transport layers (ETLs) on PSC performance and stability by synthesizing and evaluating two naphthalene diimide (NDI)-based ETLs: NDI-(PhPA) 2 , functionalized with polar phenyl phosphonic acid (PhPA) groups, and NDI-(PhBr) 2 , modified with nonpolar bromophenyl (PhBr) groups. X-ray photoelectron spectroscopy confirms that PhPA functionalization leads to NDIs anchored onto fluorine-doped tin oxide (FTO) following chemical bath deposition, while NDI-(PhBr) 2 shows no detectable surface presence after deposition. We show that NDI-(PhPA) 2 deposits as a thin film on FTO, exhibiting strong adhesion, high solvent resistance, and enhanced light and thermal stability, achieving a maximum device efficiency of 14.3%. Stability assessments conducted under continuous illumination at 25 °C for 200 hours and at 65 °C for 100 hours demonstrate performance on par with TiO 2 -based ETLs. In contrast, NDI-(PhBr) 2 , which lacks strong anchoring interactions, fails to adhere to the FTO surface, resulting in a rapid decrease in efficiency over a few hours, comparable to devices without an ETL. These findings highlight the importance of anchoring groups in organic CTLs for achieving long-term PSC stability under operational conditions.

Kim, Sanggyun [Georgia Institute of Technology, At↗

Bias-induced offset effect overlapped on bipolar-resistance effect based on Co/SiO{sub 2}/Si structure

Recent study shows the resistance of a metal-oxide-semiconductor (MOS) structure can be controlled by a laser via a bipolar-resistance effect (BRE). Based on this BRE phenomenon, we find an overlapped offset effect which is induced by an external bias applying to the structure. This offset effect features with a moveable equilibrium point of BRE, suggesting a combined control to the resistance and adding functionality to the MOS-based photoelectric devices.

36 MATERIALS SCIENCE↗

Encapsulated gate-all-around InAs nanowire field-effect transistors

We report the fabrication of lateral gate-all-around InAs nanowire field-effect transistors whose gate overlaps the source and drain electrodes and thus fully encapsulates the nanowire channel. They feature large drive current and transconductance that surpass those of conventional non-gate-overlap devices. The improved device characteristics can be attributed to the elimination of access resistance associated with ungated segments between the gate and source/drain electrodes. Our data also reveal a correlation between the normalized transconductance and the threshold voltage, which points to a beneficial effect of our wet-etching procedure performed prior to the atomic-layer-deposition of the gate dielectric.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Research Update: Electrical monitoring of cysts using organic electrochemical transistors

Organotypic three-dimensional (3D) cell culture models have the potential to act as surrogate tissues in vitro, both for basic research and for drug discovery/toxicology. 3D cultures maintain not only 3D architecture but also cell-cell and cell extracellular matrix interactions, particularly when grown in cysts or spheroids. Characterization of cell cultures grown in 3D formats, however, provides a significant challenge for cell biologists due to the incompatibility of these structures with commonly found optical or electronic monitoring systems. Electronic impedance spectroscopy is a cell culture monitoring technique with great potential; however, it has not been possible to integrate 3D cultures with commercially available systems to date. Cyst-like 3D cultures are particularly challenging due to their small size and difficulty in manipulation. Herein, we demonstrate isolation of cyst-like 3D cultures by capillarity and subsequent integration with the organic electrochemical transistor for monitoring the integrity of these structures. We show not only that this versatile device can be adapted to the cyst format for measuring resistance and, therefore, the quality of the cysts, but also can be used for quantitative monitoring of the effect of toxic compounds on cells in a 3D format. The ability to quantitatively predict effects of drugs on 3D cultures in vitro has large future potential for the fields of drug discovery and toxicology.

60 APPLIED LIFE SCIENCES↗

New model of calculating the energy transfer efficiency for the spherical theta-pinch device

Ion-beam-plasma-interaction plays an important role in the field of warm dense matter and inertial confinement fusion. A spherical theta pinch is proposed to act as a plasma target in various applications including a plasma stripper cell. One key parameter for such applications is the free electron density. A linear dependency of this density to the amount of energy transferred into the plasma from an energy storage was found by Teske. Since the amount of stored energy is known, the energy transfer efficiency is a reliable parameter for the design of a spherical theta pinch device. As the main assumption of a constant reflected plasma resistance is contradictory by the measured data, the traditional two models of energy transfer efficiency will lead to wrong results. From measurements, the parasitic resistance is derived as constant. Based on this key parameter, a new model is proposed. Due to no assumption, the new model is considered as exact. Further, a comparison of these three different models is given at a fixed operation voltage for the full range of working gas pressures. Due to the inappropriate assumptions included in the traditional models, one owns a tendency to overestimate the energy transfer efficiency whereas the other leads to an underestimation. Applying our new model to a wide spread set of operation voltages and gas pressures, an overall picture of the energy transfer efficiency results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

State diagram of an orthogonal spin transfer spin valve device

We present the switching characteristics of a spin-transfer device that incorporates a perpendicularly magnetized spin-polarizing layer with an in-plane magnetized free and fixed magnetic layer, known as an orthogonal spin transfer spin valve device. This device shows clear switching between parallel (P) and antiparallel (AP) resistance states and the reverse transition (AP → P) for both current polarities. Further, hysteretic transitions are shown to occur into a state with a resistance intermediate between that of the P and AP states, again for both current polarities. These unusual spin-transfer switching characteristics can be explained within a simple macrospin model that incorporates thermal fluctuations and considers a spin-polarized current that is tilted with respect to the free layer's plane, due to the presence of the spin-transfer torque from the polarizing layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Copper thiocyanate: An attractive hole transport/extraction layer for use in organic photovoltaic cells

We report the advantageous properties of the inorganic molecular semiconductor copper(I) thiocyanate (CuSCN) for use as a hole collection/transport layer (HTL) in organic photovoltaic (OPV) cells. CuSCN possesses desirable HTL energy levels [i.e., valence band at −5.35 eV, 0.35 eV deeper than poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS)], which produces a 17% increase in power conversion efficiency (PCE) relative to PEDOT:PSS-based devices. In addition, a two-fold increase in shunt resistance for the solar cells measured in dark conditions is achieved. Ultimately, CuSCN enables polymer:fullerene based OPV cells to achieve PCE > 8%. CuSCN continues to offer promise as a chemically stable and straightforward replacement for the commonly used PEDOT:PSS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band alignments in Fe/graphene/Si(001) junctions studied by x-ray photoemission spectroscopy

The control of tunnel contact resistance is of primary importance for semiconductor-based spintronic devices. This control is hardly achieved with conventional oxide-based tunnel barriers due to deposition-induced interface states. Manipulation of single 2D atomic crystals (such as graphene sheets) weakly interacting with their substrate might represent an alternative and efficient way to design new heterostructures for a variety of different purposes including spin injection into semiconductors. In the present paper, we study by x-ray photoemission spectroscopy the band alignments and interface chemistry of iron–graphene-hydrogenated passivated silicon (001) surfaces for a low and a high n-doping concentration. We find that the hydrogen passivation of the Si(001) surface remains efficient even with a graphene sheet on the Si(001) surface. For both doping concentrations, the semiconductor is close to flat-band conditions which indicates that the Fermi level is unpinned on the semiconductor side of the Graphene/Si(001):H interface. When iron is deposited on the graphene/Si(001):H structures, the Schottky barrier height remains mainly unaffected by the metallic overlayer with a very low barrier height for electrons, a sought-after property in semiconductor based spintronic devices. Finally, we demonstrate that the graphene layer intercalated between the metal and semiconductor also serves as a protection against iron-silicide formation even at elevated temperatures preventing from the formation of a Si-based magnetic dead layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrohydrodynamic printing of organic polymeric resistors on flat and uneven surfaces

In materials printing applications, the ability to generate fine droplets is critical for achieving high-resolution features. Other desirable characteristics are high print speeds, large stand-off distances, and minimal instrumentation requirements. In this work, a tunable electrohydrodynamic (EHD) printing technique capable of generating micron-sized droplets is reported. This method was used to print organic resistors on flat and uneven substrates. These ubiquitous electronic components were built using the commercial polymer-based conductive ink poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), which has been widely used in the manufacturing of organic electronic devices. Resistors with widths from 50 to 500 μm and resistances from 1 to 70 Ω/μm were created. An array of emission modes for EHD printing was identified. Among these, the most promising is the microdripping mode, where droplets 10 times smaller than the nozzle's inner diameter were created at frequencies in excess of 5 kHz. It was found that the ink flow rate, applied voltage, and stand-off distance all significantly influence the droplet generation frequency. In particular, the experimental results reveal that the frequency increases nonlinearly with the applied voltage. The non-Newtonian shear thinning behavior of PEDOT:PSS strongly influenced the droplet frequency. Finally, the topology of a 3-dimensional target substrate had a significant effect on the structure and function of a printed resistor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic Transport in Hydrogen-Terminated Si(001) Nanomembranes

Charge carrier transport in thin hydrogen (H)-terminated Si(001) sheets is explored via a four-probe device fabricated on silicon-on-insulator (SOI) using the bulk host Si as a back gate. The method enables electrical measurements without the need to contact the sample surface proper. Furthermore, sheet conductance measurements as a function of back-gate voltage demonstrate the presence of acceptor- and donorlike surface states. These states are distributed throughout the gap and can be removed or transformed with low-temperature annealing. The density of donorlike states is just under 10 12 cm -2 eV -1 and 3 times higher than that of the acceptorlike states. We discuss the possible origins of these states. The conductance through the surface layer is too small to measure.

2-dimensional systems↗

Enhancement-Mode GaN Monolithic Bidirectional Switch With Breakdown Voltage Over 3.3 kV

Here, this work demonstrates a GaN enhancement-mode monolithic bidirectional switch (MBDS) with breakdown voltage (BV) higher than 3.3 kV in both polarities. This MBDS is realized on a dual p-GaN gate high electron mobility transistor (HEMT) platform on sapphire substrate. It features a novel dual junction termination extension design for electric field management, which is built on the p-GaN layer in the gate stack and does not require epitaxial regrowth. The GaN MBDS exhibits symmetric on-state characteristics in both directions with a threshold voltage (V th ) of 0.6 V and a low specific on-resistance (R on,sp ) of 5.6 m Ω · cm2. This device presents the highest BV, as well as one of the best BV and R on,sp trade-offs, in all the reported MBDS devices. The R on,sp is lower than the performance limit of conventional BDS realized by two discrete devices. This 3.3 kV GaN MBDS opens the door for developing new circuit topologies and advancing system performance in medium-voltage power electronics.

42 ENGINEERING↗

Post-deposition Metal Halide Treatment of CuGaSe 2 for Photovoltaic Application

Copper gallium diselenide (CGS) semiconductor thin films were deposited by three-stage thermal co-evaporation process. Post-deposition treatments and recrystallization were performed at various AgBr doses of 40 mg, 60 mg, and 80 mg after the 2 nd stage. The changes in surface morphology were confirmed by SEM. The electrical properties were also modified, as the resistivity of the film decreases with increasing doses. Here, the device performance after the treatment did not change as expected, as the overall device performance only slightly increases in the case of 60 mg of AgBr. Substantial changes in the fabrication process will therefore be required for better device results.

14 SOLAR ENERGY↗

Passivation of AlN/GaN HEMTs Using Ozone Treatment

Ozone treatment of AlN on AlN/GaN heterostructures produces effective surface passivation and chemical resistance to the AZ positive photoresist developer used for subsequent device fabrication. The ozone-passivated AlN/GaN High Electron Mobility Transistors (HEMTs) exhibited low gate leakage currents, high gate modulation voltage, and minimal drain current degradation during gate pulse measurements. With an additional oxygen plasma treatment on the gate area prior to the gate metal deposition, enhancement-mode AlN/GaN high electron mobility transistors were realized. The gate characteristics of the HEMTs treated with the ozone and oxygen plasma behaved in a manner similar to a metal oxide semiconductor diode-like gate current-voltage characteristic instead of a Schottky diode. Drain breakdown voltages of 23 and 43V for d- and e-mode HEMT were obtained, respectively. For d-mode HEMTs, there was no reduction in drain current during the gate pulse measurements at frequencies of 1 kHz, 10 kHz and 100 kHz. For the e-mode HEMT, the drain current was reduced 5% at 100 kHz.

36 MATERIALS SCIENCE↗

Active High Assurance Authentication Protocol (AHAAP)

The AHAAP Maturation Project involves maturation and evaluation of a patented zero-trust tamper-resistant high-assurance session-less dynamic and active device authentication protocol that simultaneously authenticates identity and provides integrity verification in a single step, substantially reducing the risk of cyberattack, and eliminating the need for costly and complex conventional communication security systems requirements (i.e., cryptography, Public Key Infrastructure (PKI), and key management). These cybersecurity attributes of the technology must be preserved when applying the technology to different cybersecurity solutions, including Command & Control (C&C), Over-the-Air (OTA) update, Common Access Card (CAC), and distributed energy resource (DER) implementations, among others. The technology research objective is to test and verify that the cybersecurity attributes of the technology are not degraded in different cybersecurity applications. The primary technology development objective is to build minimum viable products to demonstrate the technology addresses today’s cybersecurity threats so that prospective investors, strategic partners, regulatory agencies, and commercial customers can interact with and assess the protection assured by the technology. The AHAAP Maturation Project goal is to develop, test, and validate one or more AHAAP implementations. The AHAAP Maturation Project tasks are: (i) engineer AHAAP implementation software, (ii) build a functional prototype that implements the AHAAP software for demonstration, testing, analysis, and evaluation purposes, and (iii) generate a report detailing the results of the AHAAP C&C software and hardware implementation. The final project deliverables are: (i) AHAAP software implementation and prototype, (ii) a report from Sandia National Laboratories detailing the results of the AHAAP implementations.

97 MATHEMATICS AND COMPUTING↗

An Analytical Model for Predicting Turn-ON Overshoot in Normally-OFF GaN HEMTs

Recently, a major challenge in the adoption of wide bandgap semiconductors for power electronic applications is the need to trade device performance for device safety. In this article, methods for predicting gate voltage overshoot in normally-OFF gallium nitride (GAN) high electron mobility transistors (HEMTs) are derived in order to deliver optimal device performance. Two models are proposed; a simple, yet less accurate second order model and a complex, yet more accurate fourth order model. These models allow for the calculation of gate resistances necessary for a desired amount of gate voltage overshoot. The nonlinear capacitances of the device are considered in the analysis. The models are validated with an experimental double-pulse tester. Furthermore, these newly developed models allow design engineers to extract the best possible performance of commercially available GaN devices while keeping the devices in their safe-operating region.

42 ENGINEERING↗

Framework to predict optimal buffer layer pairing for thin film solar cell absorbers: A case study for tin sulfide/zinc oxysulfide

An outstanding challenge in the development of novel functional materials for optoelectronic devices is identifying suitable charge-carrier contact layers. Herein, we simulate the photovoltaic device performance of various n-type contact material pairings with tin(II) sulfide (SnS), a p-type absorber. The performance of the contacting material, and resulting device efficiency, depend most strongly on two variables: conduction band offset between absorber and contact layer, and doping concentration within the contact layer. By generating a 2D contour plot of device efficiency as a function of these two variables, we create a performance-space plot for contacting layers on a given absorber material. For a simulated high-lifetime SnS absorber, this 2D performance-space illustrates two maxima, one local and one global. The local maximum occurs over a wide range of contact-layer doping concentrations (below 10{sup 16 }cm{sup −3}), but only a narrow range of conduction band offsets (0 to −0.1 eV), and is highly sensitive to interface recombination. This first maximum is ideal for early-stage absorber research because it is more robust to low bulk-minority-carrier lifetime and pinholes (shunts), enabling device efficiencies approaching half the Shockley-Queisser limit, greater than 16%. The global maximum is achieved with contact-layer doping concentrations greater than 10{sup 18 }cm{sup −3}, but for a wider range of band offsets (−0.1 to 0.2 eV), and is insensitive to interface recombination. This second maximum is ideal for high-quality films because it is more robust to interface recombination, enabling device efficiencies approaching the Shockley-Queisser limit, greater than 20%. Band offset measurements using X-ray photoelectron spectroscopy and carrier concentration approximated from resistivity measurements are used to characterize the zinc oxysulfide contacting layers in recent record-efficiency SnS devices. Simulations representative of these present-day devices suggest that record efficiency SnS devices are optimized for the second local maximum, due to low absorber lifetime and relatively well passivated interfaces. By employing contact layers with higher carrier concentrations and lower electron affinities, a higher efficiency ceiling can be enabled.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced photocurrent density in graphene/Si based solar cell (GSSC) by optimizing active layer thickness

Thickness dependent photocurrent density in active layer of graphene/Si based solar cell has been investigated via analytical – simulation study. This report is a preliminary comparison of experimental and analytical investigation of graphene/Si based solar cell. Graphene sheet was interfaced with Si thin film forming heterojunction solar cell that was treated as a device model for photocurrent generator. Such current can be enhanced by optimizing active layer thickness and involving metal oxide as supporting layer to shift photons absorption. In this case there are two type of devices model with and without TiO{sub 2} in which the silicon thickness varied at 20 – 100 nm. All of them have examined and also compared with each other to obtain an optimum value. From this calculation it found that generated currents almost linear with thickness but there are saturated conditions that no more enhancements will be achieved. Furthermore TiO{sub 2} layer is effectively increases photon absorption but reducing device stability, maximum current is fluctuates enough. This may caused by the disturbance of excitons diffusion and resistivity inside each layer. Finally by controlling active layer thickness, it is quite useful to estimate optimization in order to develop the next solar cell devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗