Search NASA⌕ Search

SEARCH · Search NASA

Results for “STOCKPILES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Distillation of Americium from Plutonium Americium Oxide

Understanding the changes that fuel undergoes inside a reactor and understanding the properties of recycled fuel to provide a foundation for the development of a sustainable nuclear fuel cycles are two of the main objectives of Fuel Cycle Research and Development (FCRD). Research on transmutation fuel aims to develop technologies needed to transmute the long-lived transuranic actinide isotopes contained in spent nuclear fuel into shorter-lived fission products, thereby decreasing both the volume of material requiring disposal and the long-term radiotoxicity of the waste. Since there is no recycled nuclear fuel available for study within the United States, studies of this type of fuel must be conducted on fabricated fuel. Americium is an important component of recycled fuel and, thus, is a vital additive in the fabrication process. Unfortunately, the supplies of pure americium metal are dwindling. Idaho National laboratory (INL) has acquired a stockpile of americium- bearing material from around the DOE complex which can be purified to supply the needs of the fuel fabrication process. In order to make this material usable, it must be distilled (or, in some cases, reduced from an oxide) to a material pure enough to be used in the fuel fabrication process. The americium distillation experiments were set up to develop a process to convert the available americium bearing material into pure americium metal. This work gives important insight into the best parameters to use in future americium distillation runs. Since future starting material is likely to contain significantly more oxide, it will be necessary to add a reducing agent such as lanthanum in order to reduce the oxide material prior to distillation. Early experiments show that the addition of lanthanum does not significantly change the purity of the end product. Soak time was found to be beneficial in producing a higher quantity of pure material. All experiments show that the material preferentially deposits on the walls of the crucible rather than on the cold finger as was originally intended. Future experiments will aim to deposit material on the cold finger rather than the crucible walls in order to make material retrieval easier as well as to increase yield. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Support of UJV Rez, a. s. for Shipments of Spent Nuclear Fuel Within the M3 Program - 19035

In 2005, UJV Rez, a. s. (UJV, the former Nuclear Research Institute Rez), Czech Republic joined the Russian Research Reactor Fuel Return (RRRFR) program under the US-Russian Global Threat Reduction Initiative (GTRI) (now Material Management and Minimization program, M{sup 3}). The primary goal of the program is to advance nuclear nonproliferation objectives encouraging eligible countries to convert their research reactors from highly enriched uranium (HEU) to low enriched uranium (LEU) fuel and eliminating stockpiles of HEU. UJV's daughter company, Research Centre Rez, operates the LVR-15 research reactor with output of 10 MWth, which has been in operation since 1957. After more than 50 years of operation of the reactor, a large amount of spent nuclear fuel (SNF) of Russian origin had been accumulated. The SKODA VPVR/M high capacity casks were used for SNF shipment from the LVR-15 research reactor back to the Russian Federation (RF). The cask has a capacity of 36 fuel assemblies, and 16 casks are available. This means that 576 FA can be transported in one shipment. Two SNF shipments of HEU and LEU SNF from UJV were realized in 2007 and 2013. After the shipments were completed, only LEU nuclear fuel remained on the territory of the Czech Republic. Proven to be an excellent and very sophisticated system for SNF transportation, the SKODA VPVR/M casks were further employed for SNF shipments from Bulgaria, Hungary, Poland, Ukraine, Belarus, Serbia, Vietnam, Uzbekistan and Georgia to Russia. Some shipments were carried out as air shipments with use of the TUK-145/C cask system developed in Russia that included the SKODA cask. In 2016, the new SKODA MNSR casks were developed on the base of the SKODA VPVR/M casks in the Czech Republic and currently are being employed in the shipments of HEU cores of Chinese Miniature Neutron Source Reactors (MNSR) to China. The TUK-145/C-MNSR cask system developed in Russia is used for air transportation. The shipment from Ghana was carried out in 2016; the shipment from Nigeria is under realization. Shipments from Syria, Iraq and Pakistan are planned. Sixteen shipments from eleven countries using a total of 109 SKODA casks have already been completed without any incident or accident and more than 3500 fuel assemblies or cores have been shipped to Russia and China. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

MPF X-Ray Module Setup for 2018

The Mobile Plutonium Facility (MPF) is a portable module design facility that can be deployed anywhere in the world for the safe recovery, packaging, and shipment of a nations legacy, or excess plutonium stockpile. All of the modules of MPF have specific purposes for operating in a mission if one were to ever come up. For my past four internships here at SRNL I have been working on the support of the X-Ray module for MPF. This year I installed new equipment I had purchased last year for the X-Ray Module and made sure the module was mission ready for the chance that the team deploys in the future for plutonium recovery. Using digital radiography (DR) and computed tomography (CT) provides the MPF team the ability to verify the contents of containers that would be holding material. This also ensures the safety of the team members in the glovebox facilities by verifying that there are no sharps, liquids, or other items that may harm the workers or glovebox operations when working with radioactive material. X-Ray imaging can also pick up low density objects like plastic bags and tape. Note how the DR image hides the puncture in the inner can while the CT image shows the damage. New DR and CT computers with upgraded software, New imaging panel, NOVO Portable X-Ray System. Because of the new upgrades to the X-Ray module system containers can be scanned and evaluated quicker than before. With the last system the 3D model reconstruction alone would take anywhere from 10-12 minutes, now with the new system that time has been brought down to just shy of 1 minute 30 seconds. The new portable system also can 1,2 or 4 images of an object and stitch them together into a mosaic for scanning of larger containers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The DOE Criticality safety support group - A retrospective perspective - 14580

The Department of Energy (DOE) Nuclear Criticality Safety Support Group (CSSG) came into being as a response to the DNFSB recommendation 1997-2 'Criticality Safety' which dealt with the continuation of criticality safety at defense nuclear facilities in the Department of Energy Enterprise. The DNFSB was concerned over the lack of capability management of practical experience pertinent to avoiding a criticality accident in non-reactor environments. One of the specific recommendations of 1997-2 was to 'Identify a core group of criticality experts experienced in the theoretical and experimental aspects of neutron chain reactions to advise on the above steps and assist in resolving future technical issues'. The CSSG, a group of 10 recognized experts in criticality safety, was chartered in late 1997 to address the recommendation. Members of the CSSG are drawn from DOE employees and contractor staff to provide advice and technical support to help meet the criticality safety needs of DOE missions, including stockpile stewardship, materials stabilization, transportation, storage, facilities life cycle (design through decommissioning), and waste disposal. The CSSG is an integral part of the DOE Nuclear Criticality Safety Program (NCSP) developed to maintain and enhance the operational and technical criticality safety expertise and capability within the Department of Energy Enterprise. This paper outlines the history, purpose and continuing contribution of the CSSG as well as providing an understanding of the interfaces between the DOE CSSG, the DOE Criticality Safety Coordinating Team (CSCT), the ANS Nuclear Criticality Safety Division and the EFCOG Criticality Safety Subgroup. (authors)

42 ENGINEERING↗

FY23 Laboratory Directed Research & Development Annual Report

At Savannah River National Laboratory (SRNL), we put science to work to protect the environment and address nuclear security challenges. Through our transformative science and technology efforts, SRNL provides solutions to the Department of Energy (DOE) Office of Environmental Management (EM) for the safe cleanup of environmental legacy resulting from nuclear weapons development and government-sponsored nuclear energy research. SRNL also supports DOE’s National Nuclear Security Administration (NNSA) as it maintains the nation’s nuclear stockpile and reduces the threat of nuclear proliferation around the world. Investments through SRNL’s Laboratory Directed Research and Development (LDRD) program drive exploratory research foundational to advancements in mission critical technologies for EM, NNSA and other offices of DOE. Our LDRD program also provides meaningful development opportunities for the people central to innovation. Seven Laboratory Director’s Postdoctoral Research Fellows were supported by LDRD during fiscal year 2023. These named postdoctoral fellows are driving SRNL’s scientific and technical core competencies forward through their dedication to research and advancement of technologies. The LDRD program supports established researchers to explore new concepts, while fueling opportunities for the next generation of scientists to join the SRNL workforce, contributing to the global scientific community through scientific publications. Enjoy reading this Annual Report which summarizes the innovative science and engineering contributions of SRNL staff supported by the LDRD Program. Dr. Vahid Majid

Majidi, Vahid↗

Fusion Ignition and the Path to Inertial Fusion Energy

The achievement of fusion ignition at Lawrence Livermore National Laboratory's (LLNL) National Ignition Facility (NIF) in December 2022 was the culmination of more than 60 years of research and development in laser-driven inertial confinement fusion at LLNL. That historic scientific, engineering, and technological accomplishment, a prime example of the value of ingenuity and commitment in the face of a grand scientific challenge, marked a significant advance in LLNL's support of the National Nuclear Security Administration's science-based Stockpile Stewardship Program to maintain the reliability and security of the nation's nuclear deterrent without underground testing. It also furthered Livermore's research in high energy density science and established the fundamental scientific basis for inertial fusion energy (IFE), emboldening further public and private research into the development of IFE as a potential source of abundance clean, safe, and reliable energy. Finally, the U.S. government has funded a multi-disciplinary, multi-institutional program that LLNL is now leading to make inertial fusion energy a reality.

36 MATERIALS SCIENCE↗

STEM Professional Development Program for Nuclear Security Science and Technology Consortium

This oral presentation captures the technical and developmental aspect of the program in support of UNLV. The goal of this project is to develop a steady pipeline of STEM educated professionals in area of national and international nuclear security. The goal is to train university students at NNSS laboratories in studies motivated by global nuclear security topics ranging from nuclear emergency response and management to physics experiments for stockpile stewardship program.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

A Mobile Hot Cell for Conditioning Disused Sealed Radioactive Sources for Storage or Transportation

An innovative Mobile Hot Cell (MHC) has been developed for conditioning Disused Sealed Radioactive Sources (DSRS) category 1 and 2 for storage or transportation. The MHC is designed to provide both Radiological and Biological containment with a maximum capacity of 1000 Ci Co60 or 5000Ci Cs137 source and can be transported via standard cargo containers. This project has been supported through the National Nuclear Safety Administration (NNSA) Offsite Source Recovery Program (OSRP). The project is intended for the international community rather than domestic although domestic use is a possibility. Many countries have significant stockpiles of these devices that are often stored in less-than-optimal circumstances. This necessitates that these devices be addressed expeditiously, and the sources secured. The MHC utilizes robotics, automation, and other non-traditional methods for disassembling, characterizing, and packaging these sources that have reached end of life or are otherwise not needed. These innovative approaches are necessary to facilitate an expedited timeline to efficiently and safely secure these sources in a non-proliferation effort. Conditioning efforts include disassembling the device such as a teletherapy head used for cancer treatment, or blood/research irradiators such that the radioactive sources may be removed safely. The sources are then characterized. Leak checks are performed, dimensions are verified, and serial numbers are confirmed. Upon completion, the sources are typically placed into a Standard Forms Capsule which is seal welded closed. It is leak tested and placed into a Long-Term Storage Shield (LTSS) which can either be secured for storage directly or loaded into an appropriate cask for transportation. Further innovations include multiple deployment scenarios that include a full deployment of MHC components, deployment of the MHC automation internal components to an existing hot cell, deployment of minimally required MHC components and incorporation of sand for shielding, and integration of the MHC for Silo Storage, or Bore Hole Storage efforts. The MHC has evolved from a very specific use case to a “Swiss Army Knife” type of a tool in that it can be readily adapted to a large variety of situations. Innovative approaches such as the use of robotics, Computer Numeric Control (CNC) machining centers, automated welding equipment, HDMI Cameras, and LED lighting are some of the developed technologies incorporated into the MHC design. Shielding is accomplished with a steel walled Base Box which is surrounded by four nesting doll shield shells which when combined limits the external dose rate to 5mr/hr when a 1000 Ci Co60 source is exposed inside.

99 - GENERAL AND MISCELLANEOUS↗

Effect of ionizing radiation on PuO2 and surrogate oxide materials under storage conditions

The stockpile of plutonium separated from used nuclear fuel amounts to many 100s of tonnes. The majority of this plutonium is stored as PuO2 powder packaged in multi-can containers. The conditions during the packaging of reprocessed PuO2 for long term storage are closely controlled to limit water uptake as radiolytic decomposition of any adsorbed water will lead to the formation of both a potentially flammable atmosphere containing molecular hydrogen as well as reactive oxygen species which may be incorporated into the oxide phase. Consequently, the safety case for the long-term storage of PuO2 requires a complete understanding of the fundamental physical, chemical and materials degradation processes occurring at the water-oxide interface inside the storage canisters. This study investigates the effect of ionizing radiation on PuO2 and various surrogate oxides under atmospheres potentially encountered in storage canisters.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NDCX-II project commencing at LBNL

NDCX-II is the second-generation Neutralized Drift Compression eXperiment, capable of accelerating and strongly bunching tens of nanoCoulombs of non-relativistic ions, for applications requiring nanosecond-scale pulses with short stopping ranges. As with the existing NDCX-I at Lawrence Berkeley National Laboratory (LBNL), the new machine is based on the technique of neutralized drift compression, whereby a head-to-tail velocity gradient is imparted to the beam, which then shortens as it drifts in a neutralizing plasma that suppresses space-charge forces. The figure shows the layout of the machine, to be sited at LBNL. It will make extensive use of induction cells and other parts from the decommissioned Advanced Test Accelerator (ATA) at Lawrence Livermore National Laboratory (LLNL). It will be extensible and reconfigurable; in the configuration that has received the most emphasis, each pulse will deliver 30-50 nC of Li+ ions at 3 MeV into a mm-scale spot onto a thin-foil target. Pulse compression to {approx} 1 ns begins in the accelerator and finishes in the drift compression line; the beam is manipulated using suitably tailored voltage waveforms in the accelerating gaps. NDCX-II employs novel beam dynamics. To use the 200 kV Blumlein pulsed power from ATA (blue cylinders in the figure), the pulse duration must first be reduced from an initial 500 ns to less than 70 ns. This shortening is accomplished in an initial stage of non-neutral drift compression, downstream of the injector and the first few induction cells (note the spaces between induction cells at the left end of the figure). The compression is rapid enough that fewer than ten long-pulse waveform generators are needed, with Blumleins powering the rest of the acceleration. Extensive particle-in-cell simulation studies have enabled an attractive physics design that meets the stringent cost goal. Snapshots from a simulation video are shown in the figure. Studies on a dedicated test stand are characterizing the performance of the ATA hardware, and of pulsed solenoids that will provide transverse beam confinement (ions require much stronger fields than the electrons accelerated by ATA). Applications of this facility will include studies of: the basic physics of the poorly understood 'warm dense matter' regime of temperatures around 10,000 K and densities near solid, using uniform, volumetric ion heating of thin foil targets; ion energy coupling into an ablating plasma (such as that which occurs in an inertial fusion target) using beams with time-varying kinetic energy; space-charge-dominated ion beam dynamics; and beam focusing and pulse compression in neutralizing plasma. The machine will complement facilities at GSI in Darmstadt, Germany, but will employ lower ion kinetic energies and commensurately shorter stopping ranges in matter. Much of this research will contribute directly toward the collaboration's ultimate goal of electric power production via heavy-ion beam-driven inertial confinement fusion ('Heavy-Ion Fusion,' or HIF). In inertial fusion, a target containing fusion fuel is heated by energetic 'driver' beams, and undergoes a miniature thermonuclear explosion. Currently the largest U.S. research program in inertial confinement is at Livermore's National Ignition Facility (NIF), a multibillion-dollar, stadium-sized laser facility that was developed for studying physics relevant to nuclear stockpile stewardship. NIF is expected to establish the fundamental feasibility of fusion ignition on the laboratory scale, and to thereby advance this approach to fusion energy. Heavy ion accelerators offer efficiency and longevity, and can use magnetic fields for final focusing onto a target. These attributes make them attractive candidates as inertial fusion energy drivers. The space-charge-dominated beams in such a system will require manipulation and control similar to that being pioneered on NDCX-II.

43 PARTICLE ACCELERATORS↗

Proton Radiography: Cross Section Measurements and Detector Development

Proton radiography has become an important tool for predicting the performance of stockpiled nuclear weapons. Current proton radiography experiments at LANSCE are confined to relatively small targets on the order of centimeters in size because of the low beam energy. LANL scientists have made radiographs with 12 and 24 GeV protons produced by the accelerator at Brookhaven National Laboratory. These energies are in the range required for hydrotest radiography. The design of a facility for hydrotest radiography requires knowledge of the cross sections for producing high-energy particles in the forward direction, which are incorporated into the Monte Carlo simulation used in designing the beam and detectors. There are few existing measurements of neutron production cross sections for proton-nuclei interactions in the 50 GeV range, and almost no data exist for forward neutron production, especially for heavy target nuclei. Thus the data from the MIPP EMCAL and HCAL, for which our group was responsible, are critical to proton radiography. Since neutrons and photons cannot be focused by magnets, they cause a background “fog” on the images. This problem can be minimized by careful design of the focusing system and detectors. The purpose of our research was to measure forward production of neutrons produced by high-energy proton beams striking a variety of targets. The forward-going particles carry most of the energy from a high-energy proton interaction, so these are the most important to proton radiography. This work was carried out in conjunction with the Fermilab E-907 (MIPP) collaboration. Our group was responsible for designing and building the E907 forward neutron and photon calorimeters. With the support of our Stewardship Science Academic Alliances grants, we were able to design, build, and commission the calorimeters on budget and ahead of schedule. The MIPP experiment accumulated a large amount of data in the first run that ended in early 2006. Our group has almost completed the analysis the forward neutron production data. Large dis-crepancies between our neutron production data and Monte Carlo expectations have been found.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

R- AND P- REACTOR VESSEL IN-SITU DECOMISSIONING VISUALIZATION

The R- & P- Reactor facilities were constructed in the early 1950's in response to Cold War efforts. The mission of the facilities was to produce materials for use in the nation's nuclear weapons stockpile. R-Reactor was removed from service in 1964 when President Johnson announced a slowdown of he nuclear arms race. PReactor continued operation until 1988 until the facility was taken off-line to modernize the facility with new safeguards. Efforts to restart the reactor ended in 1990 at the end of the Cold War. Both facilities have sat idle since their closure and have been identified as the first two reactors for closure at SRS.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

How NIF Works

The National Ignition Facility, located at Lawrence Livermore National Laboratory, is the world's largest laser system... 192 huge laser beams in a massive building, all focused down at the last moment at a 2 millimeter ball containing frozen hydrogen gas. The goal is to achieve fusion... getting more energy out than was used to create it. It's never been done before under controlled conditions, just in nuclear weapons and in stars. We expect to do it within the next 2-3 years. The purpose is threefold: to create an almost limitless supply of safe, carbon-free, proliferation-free electricity; examine new regimes of astrophysics as well as basic science; and study the inner-workings of the U.S. stockpile of nuclear weapons to ensure they remain safe, secure and reliable without the need for underground testing. More information about NIF can be found at:

42 ENGINEERING↗

Materials Data Science Ontology(MDS-Onto): Unifying Domain Knowledge in Materials and Applied Data Science

Ontologies have gained popularity in the scientific community as a way to standardize terminologies in organizations’ data. Although certain cohorts have created frameworks with rules and guidelines on creating ontologies, there exist significant variations in how Materials Science ontologies are currently developed. We seek to provide guidance in the form of a unified automated framework for developing interoperable and modular ontologies for Materials Data Science that simplifies the ontology terms matching by establishing a semantic bridge up to the Basic Formal Ontology(BFO). This framework provides key recommendations on how ontologies should be positioned within the semantic web, what knowledge representation language is recommended, and where ontologies should be published online to boost their findability and interoperability. Two fundamental components of the MDS-Onto framework are the bilingual package called FAIRmaterials for ontology creation and FAIRLinked, for FAIR data creation. To showcase the practical capabilities of FAIRmaterials, we present two exemplar domain ontologies of MDS-Onto: Synchrotron X-Ray Diffraction and Photovoltaics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

FAIRmaterials: Ontology Tools with Data FAIRification in Development

The bilingual FAIRmaterials package simplifies the creation and visualization of materials and data science ontologies. FAIRmaterials, available in the Python and R languages, addresses the complexities associated with traditional ontology editors based on manual user input such as Protege with an intuitive workflow and easy-to-use templates, making it accessible to users both experienced and inexperienced with ontologies. The FAIRmaterials package is its ability to programatically convert simple and structured CSV inputs into rich, well-defined ontologies. This capability is designed to support the findability, accessibility, interoperability, and reusability (FAIR) of research data and serve as a tool in the process of data FAIRification. Its additional features, such as automated ontology merging, static visualizations, and comprehensive documentation for outputs extend its utility, making it a valuable tool for any researcher engaged in knowledge management.

Bradley, Alexander Harding [Case Western Reserve U↗

FAIRLinked: Data FAIRification Tools for Materials Data Science

FAIRLinked is a software package created to support the FAIRification of materials science data, ensuring proper alignment with FAIR principles: Findable, Accessible, Interoperable, and Reusable. It is built to be compatible with MDS-Onto, an ontology designed to capture the semantics of various types of materials data, enabling integration and sharing across different research workflows. The package is subdivided into three subpackages: InterfaceMDS, RDFTableConversion, and QBWorkflow. The first subpackage, InterfaceMDS allows users to search for terms using either string search or various filters, explore different domains and subdomains, and add terms to MDS-Onto. RDFTableConversion is used for serialization and deserialization of data from CSV into JSONLDs and vice versa in a way that captures the semantics of the data using MDS-Onto. Lastly, QBWorkflow is a serialization and deserialization workflow that incorporates RDF Data Cube vocabulary, useful for working with multidimensional datasets. By offering these packages, FAIRLinked lowers the barrier of creating FAIR, machine-actionable data for researchers in the materials science community.

FAIR↗

Simultaneous CFD evaluation of wind flow and dust emission in open storage piles

Dust emission from storage yards is a multivariable problem to be solved not only at any new installation in order to obtain the licenses from the involved authorities but also at existing yards to continue the operation. Engineers have a great variety of methodologies available at the market to estimate such emissions, but in general the process is divided into two independent stages: wind flow analysis and application of emission rates into such wind pattern. This paper summarizes the research developed by this group to link both steps: by using CFX version 10.0, a powerful computational fluid dynamics (CFD) software, the wind flow around the piles is predicted, or even through a complex yard, and at the same time by implementing new subroutines introduced into the standard software, the program is able to give a quantitative evaluation of the total fugitive dust.

01 COAL, LIGNITE, AND PEAT↗

Effect of temperature and radiation damage on the local atomic structure of metallic plutonium and related compounds

This focused review provides an overview and a framework for understanding local structure in metallic plutonium (especially the metastable fcc $δ$-phase alloyed with Ga) as it relates to self-irradiation damage. Of particular concern is the challenge of understanding self-irradiation damage in plutonium-bearing materials where theoretical challenges of the unique involvement of the 5f electrons in bonding limit the efficacy of molecular dynamics simulations and experimental challenges of working with radioactive material have limited the ability to confirm the results of such simulations and to further push the field forward. The main concentration is on extended X-ray absorption fine-structure measurements of $δ$-phase Pu, but the scope is broadened to include certain studies on plutonium intermetallics and oxides insofar as they inform the physics of damage and healing processes in elemental Pu. Here, the studies reviewed here provide insight into lattice distortions and their production, damage annealing and defect migration, and the importance of understanding and controlling sample morphology when interpreting such experiments.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗