Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Low temperature dielectric relaxation and charged defects in ferroelectric thin films

We report a dielectric relaxation in BaTiO{sub 3}-based ferroelectric thin films of different composition and with several growth modes: sputtering (with and without magnetron) and sol-gel. The relaxation was observed at cryogenic temperatures (T < 100 K) for frequencies from 100 Hz up to 10 MHz. This relaxation activation energy is always lower than 200 meV and is very similar to the relaxation that we reported in the parent bulk perovskites. Based on our Electron Paramagnetic Resonance (EPR) investigation, we ascribe this dielectric relaxation to the hopping of electrons among Ti{sup 3+}-V(O) charged defects. Being dependent on the growth process and on the amount of oxygen vacancies, this relaxation can be a useful probe of defects in actual integrated capacitors with no need for specific shaping.

36 MATERIALS SCIENCE↗

Impacts of Forest Fire Ash on Aquatic Mercury Cycling

Mercury (Hg) is a ubiquitous contaminant in the environment and its methylated form, methylmercury (MeHg), poses a worldwide health concern for humans and wildlife, primarily through fish consumption. Global production of forest fire ash, derived from wildfires and prescribed burns, is rapidly increasing due to a warming climate, but their interactions with aqueous and sedimentary Hg are poorly understood. In this study, we compared the differences of wildfire ash with activated carbon and biochar on the sorption of aqueous inorganic Hg and sedimentary Hg methylation. Sorption of aqueous inorganic Hg was greatest for wildfire ash materials (up to 0.21 μg g ₋1 or 2.2 μg g ₋1 C) among all of the solid sorbents evaluated. A similar Hg adsorption mechanism for activated carbon, biochar made of walnut, and wildfire ash was found that involves the formation of complexes between Hg and oxygen-containing functional groups, especially the ₋COO group. Notably, increasing dissolved organic matter from 2.4 to 70 mg C L ₋1 remarkably reduced Hg sorption (up to 40% reduction) and increased the time required to reach Hg–sorbent pseudo-equilibrium. Surprisingly, biochar and wildfire ash, but not activated carbon, stimulated MeHg production during anoxic sediment incubation, possibly due to the release of labile organic matter. Overall, our study indicates that while wildfire ash can sequester aqueous Hg, the leaching of its labile organic matter may promote production of toxic MeHg in anoxic sediments, which has an important implication for potential MeHg contamination in downstream aquatic ecosystems after wildfires.

54 ENVIRONMENTAL SCIENCES↗

Kinetic Modeling of the Reaction Rate for Quartz and Carbon Black Pellet

The kinetic modeling for the carbothermal reduction reaction rate in quartz and carbon black pellets is studied at different temperatures, under varying CO partial pressures in ambient atmosphere, varying carbon contents, different quartz particle sizes, and different crucible opening areas. Carbon black is produced by the cracking of natural gas. The activation energy of the SiC-producing step was determined to be 594 kJ/mol. The averaged pre-exponential factor A obtained from 1898 K, 1923 K, and 1948 K (1625 °C, 1650 °C, and 1675 °C) is 2.62E+16 min -1 . The reaction rate of the gas-solid interface factor, fix-C content (X fix-C ), temperature (T), and CO partial pressure (X CO ) can be expressed as follows:((d pct)/(dt))=(1-0.40×X fix-C -0.86 ×pct)×2.62×10 16 ×exp(-(594000/(RT)))×(2.6-0.015×X co ).

36 MATERIALS SCIENCE↗

La and Ca co-doped ceria-based electrolyte materials for IT-SOFCs

Co-doped ceria-based electrolytes of Ce{sub 1-x}La{sub x-y}Ca{sub y}O{sub 2-{delta}}, wherein x = 0.15 and 0.20, 0 {<=} y {<=} x, were sintered from powders obtained by solid state reaction method. The phase identification, thermal expansion and ionic conductivities of samples were studied by X-ray diffraction (XRD), dilatometry and AC impedance spectroscopy (IS). Results showed that the samples of co-doping with La and Ca can significantly increase the ionic conductivity and lower activation energies compared with those of the singly doped ones in the temperature range of 500-800 deg. C. The ionic conductivities of co-doping samples decrease with Ca content. Although both systems reached the optimum ionic conductivity at y = 0.05, Ce{sub 0.85}La{sub 0.15-y}Ca{sub y}O{sub 2-{delta}} exhibits better electrical performance. The results also showed that all the synthesized samples were fluorite-type ceria-based solid solutions. The thermal expansion was linear for all the samples.

36 MATERIALS SCIENCE↗

Biomass for bio-energy and bio-char applications - 15653

Exponential population growth is a growing challenge that will increase the global demand for both food and bio-energy, increase the pressure on land and water resources and change its availability, and also influence the pattern of biomass production. The objective of this study is to evaluate and compare the efficiency of bio-sorbents obtained from different parent materials, zeolite, and activated carbon as an infiltration media of contaminated surface-groundwater by assessing reductions of chemical oxygen demand, nitrogen and phosphorus compounds, as well as sum selected trace elements. Furthermore, the current research will investigate how long the cleaning capacity of the selected bio-sorbents lasts and how the performance of the filter changes under an increased load of contaminants. Bio-sorbents characteristics, its applications as a green environmental sorbents for the contaminated water and soil, and its importance for the soil sustainable use are also reviewed. (authors)

54 ENVIRONMENTAL SCIENCES↗

Electrical parameters of polycrystalline Sm{sub 1–x}Eu{sub x}S rare-earth semiconductors

The electrical parameters of polycrystalline Sm{sub 1–x}Eu{sub x}S compounds are studied. The conductivity, concentration of free electrons, their mobility, and the conductivity activation energy are measured as functions of the quantity x. The structural parameters of the compounds are determined. A heterostructure is fabricated with x in the range from 0 to 0.3, and the electrical voltage generated by the structure, when heated to a temperature of T = 450 K, due to the thermovoltaic effect is measured. This voltage is found to be 55 mV. A method for measuring the thermally induced voltage is described. The method provides a means for separating the thermovoltaic effect from the Seebeck effect.

36 MATERIALS SCIENCE↗

Effective temperature concept evaluated in an active colloid mixture

Significance In the long-standing debate on whether the insights of statistical thermodynamics could apply to nonequilibrium systems, a key unsolved problem is whether it is useful to postulate an emergent effective temperature, different from the thermal temperature. Here, we introduce a two-component system of driven Janus colloids such that collisions induced by external energy sources play the role of temperature. We find that this nonequilibrium system quantitatively behaves as if at equilibrium, with collisions caused by differential rhythmic motion between the two components acting as a strict analog to thermal motion. We demonstrate that the effective temperature can serve as a common control parameter for both kinetics and phase behavior.

36 MATERIALS SCIENCE↗

Effect of Mn addition on deformation behaviour of 23% Cr low nickel duplex stainless steel

Highlights: • Increasing Mn content obviously affects dynamic softening behaviour of flow curves. • More complete austenite DRX occurred with middle Mn addition of 10.3% at 1 s{sup −1}. • The constitutive equations for different Mn addition alloys are developed. • The values of activation energy and Z parameter are lowest with middle Mn addition. • Different Mn addition processing maps with increasing strain were established. - Abstract: Isothermal compression testing of 23% Cr low nickel duplex stainless steels, with different Mn concentrations, was investigated in the temperature range of 1173–1423 K, the strain rate range of 0.01–10 s{sup −1} and with a height reduction of 70%. Increasing the Mn content from 6.3 to 14.1% affected the deformation dynamic softening behaviour of flow curves at lower temperature and higher strain rate. It was also observed that increasing the deformation stain rate contributed to flow softening, and was caused by dynamic recrystallization (DRX) as a function of Mn addition. Deformation microstructure analysis demonstrated that more complete austenite phase DRX occurred with 10.3% Mn addition than that with 6.3% Mn addition at 1 s{sup −1}, but an excessive Mn content of 14.1% was unfavourable due to the increase of austenite fraction and stacking fault energy enhancement. Increasing the strain rate to 10 s{sup −1} promoted austenite phase DRX at 1323 K with the Mn addition under large strain. Meanwhile, the ferrite phase DRX occurred at 1173 K/1–10 s{sup −1} with 6.3% Mn, and was weakened with higher Mn addition. Compared to the 6.3% and 14.1% Mn, continuous DRX occurred at 1323 K/1 s{sup −1} with 10.3% Mn, due to the larger fraction of high angle misorientations. The values for the activation energy and Zener–Hollomon parameter decreased with Mn addition from 6.3 to 10.3%, and then increased with a higher Mn addition of 14.1%, indicating that a proper content of Mn addition can reduce the thermal deformation resistance and promote DRX. The constitutive equations for different Mn addition alloys were developed using a hyperbolic sine equation. Processing maps with different Mn addition for the strains of 0.3, 0.6 and 1.2 were established. The 10.3% Mn content sample corresponded to the lowest instability region, implying that the workability was improved with the middle Mn addition.

36 MATERIALS SCIENCE↗

Fiber-optic thermometer application of thermal radiation from rare-earth end-doped SiO{sub 2} fiber

Visible light thermal radiation from SiO{sub 2} glass doped with Y, La, Ce, Pr, Nd, Eu, Tb, Dy, Ho, Er, Tm, Yb, and Lu were studied for the fiber-optic thermometer application based on the temperature dependence of thermal radiation. Thermal radiations according to Planck's law of radiation are observed from the SiO{sub 2} fibers doped with Y, La, Ce, Pr, Eu, Tb, and Lu at the temperature above 1100 K. Thermal radiations due to f-f transitions of rare-earth ions are observed from the SiO{sub 2} fibers doped with Nd, Dy, Ho, Er, Tm, and Yb at the temperature above 900 K. Peak intensities of thermal radiations from rare-earth doped SiO{sub 2} fibers increase sensitively with temperature. Thermal activation energies of thermal radiations by f-f transitions seen in Nd, Dy, Ho, Er, Tm, and Yb doped SiO{sub 2} fibers are smaller than those from SiO{sub 2} fibers doped with Y, La, Ce, Pr, Eu, Tb, and Lu. Thermal radiation due to highly efficient f-f transitions in Nd, Dy, Ho, Er, Tm, and Yb ions emits more easily than usual thermal radiation process. Thermal radiations from rare-earth doped SiO{sub 2} are potentially applicable for the fiber-optic thermometry above 900 K.

36 MATERIALS SCIENCE↗

Observation of amorphous to crystalline phase transformation in Te substituted Sn-Sb-Se thin films

Thin films of Sn-Sb-Se-Te (8 ≤ x ≤ 14) chalcogenide system were prepared by thermal evaporation technique using melt quenched bulk samples. The as-prepared thin films were found amorphous as evidenced from X-ray diffraction studies. Resistivity measurement showed an exponential decrease with temperature upto critical temperature (transition temperature) beyond which a sharp decrease was observed and with further increase in temperature showed an exponential decrease in resistivity with different activation energy. The transition temperature showed a decreasing trend with tellurium content in the sample. The resistivity measurement during cooling run showed no abrupt change in resistivity. The resistivity measurements of annealed films did not show any abrupt change revealing the structural transformation occurring in the material. The transition width showed an increase with tellurium content in the sample. The resistivity ratio showed two order of magnitude improvements for sample with higher tellurium content. The observed transition temperature in this system was found quite less than already commercialized Ge-Sb-Te system for optical and electronic memories.

36 MATERIALS SCIENCE↗

Quaternary (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloys and photosensitive structures on their basis

Using directional crystallization of the melt of the (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloy, homogeneous crystals of a similar atomic composition are grown over the entire range of compositions 1 {>=} x {>=} 0. It is established that the crystals of the continuous series of quaternary alloys in the range x = 0-1 crystallize in the spinel structure and lattice parameter a linearly depends on x. It is established that it is possible to obtain In(Al)/(FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} photosensitive structures. Room-temperature spectra of relative quantum efficiency of photoconversion of the In(Al)/(FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} structures fabricated for the first time are obtained. From the analysis of these spectra, activation energies of direct and indirect band-to-band transitions for the crystals of the (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloys are determined and the dependence of these parameters on the composition of the position-disordered phases of mentioned alloys is discussed. It is concluded that the crystals of the (FeIn{sub 2}S{sub 4}){sub x}(MnIn{sub 2}S{sub 4}){sub 1-x} alloys can be used in broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗

Specific features of self-compensation in Er{sub x}Sn{sub 1-x}Se solid solutions

The effect of doping and degree of compensation on the conductivity activation energy {Delta}E{sub i} in Er{sub x}Sn{sub 1-x}Se has been investigated. The carrier concentration decreases at a low doping level in the case of low and moderate compensations. It is found that, beginning with x {>=} 0.005 at % Er, carriers in the solid solutions under study change sign, depending on the amount of substituted erbium in the SnSe samples that is in equilibrium with the selenium phase. This phenomenon can be explained in terms of the concepts of the self-compensation of donors in the Sn sublattice.

36 MATERIALS SCIENCE↗

Regulating the properties of activated carbon for supercapacitors: impact of particle size and degree of aromatization of hydrochar

Hydrochar (HC), obtained by the hydrothermal carbonization (HTC) of biomass, is an excellent precursor for preparing activated carbon (AC). However, the effects of the intrinsic properties of HC on the microstructure and electrochemical properties of AC are largely unknown. Here, this study investigates the impact of particle size and the degree of aromatization of in-situ HC on the microstructure and electrochemical properties of AC. Our results show that a large particle size and a high degree of aromatization help protect the HC from overactivation by ZnCl 2 , resulting in an large specific surface area (SSA > 2000 m 2 /g) and high mesopore to micropore volume ratio value ( V mes /V mic > 0.3) of the AC. Electrochemical performance measurements show a maximum specific capacitance of 218 F/g at 0.5 A/g was achieved in all samples where the AC (AC180-10 h) was prepared by activating HC180-10 h with a large size, a high degree of aromatization, and abundant surface oxygen-containing functional groups. After AC180-10 h was assembled into a supercapacitor, the specific capacitance of AC180-10 h still reached 158 F/g at 0.5 A/g, and it showed excellent cycling stability. This study advances the understanding of the impact of HC particle size and degree of aromatization on AC properties, providing new insights into tailoring HC qualities so that improving improve the properties of AC.

36 MATERIALS SCIENCE↗

Capacitance of coarse-grained carbon electrodes with thickness up to 800 μm

We report that increasing the mass loading of active material in a supercapacitor electrode improves the energy storage capability per electrode area. However, the increase of mass loading is accompanied by the increased electrode thickness, which often causes drops in specific capacitance and counteracts the potential increase in areal capacitance once the electrode thickness exceeds 100 μm. In our previous work, we showed high specific capacitance retention of coarse-grained carbide derived carbon (CDC) with electrode thicknesses up to 1000 μm in organic electrolytes. In this work, we report that this behavior can be extended to coarse-grained activated carbon (AC). AC is the most common commercial supercapacitor electrode material with a much broader pore size distribution and lower electric conductivity compared to CDC. The areal capacitance of the AC electrode is enhanced from 2.3 F/cm 2 to 7.4 F/cm 2 at 5 mV/s, as the electrode thickness increases from 200 to 800 μm. With the increased mass loading of the active electrode material, the mass and volume occupied by current collectors and separators are reduced in the electrode stack, which leads to an increase of the gravimetric and volumetric energy density of the device. Finally, by reporting on this advantageous behavior in thick electrodes using coarse-grained carbons, we hope to garner interest toward an unexplored method for improving the performance of porous carbon-based supercapacitors, without increasing the cost or changing the current used supercapacitor manufacturing process.

36 MATERIALS SCIENCE↗

Microstructure and deformation behavior of nickel based superalloy Inconel 740 prepared by electron beam smelting

Electron beam smelting (EBS) has been used to fabricate the Inconel 740 superalloy. Microstructures, hardness, and deformation characteristics of the alloy are studied. It is observed that carbides and fine secondary phase nuclei are distributed in the hot worked EBS 740 superalloy. The Ostwald ripening occurs during solution treatment and leads to aggregation of the γ′ precipitates, the size of γ′ precipitates varies from several nanometers to more than one hundred nanometers as a result. The average size of the secondary phase is < 30 nm after aging treatment and the average Vickers hardness is measured to be about 370. The critical shear stress is calculated to be 0.627 GPa with governing mechanism of shearing, causing a stronger strengthening effect than the traditionally prepared Inconel 740 superalloy. The compression behavior indicates that the EBS 740 superalloy shows higher flow stress than 740H at low Zener-Hollomon parameter, which may arise from the undissolved γ′ precipitates and higher activation energy Q. The tensile results show that the fracture surface exhibits a ductile fracture pattern, in contrast to no obvious plastic deformation on the macroscopic fracture. Crack propagation proceeds in a transgranular fracture mode with facets and voids presented on the fracture surface. - Graphical abstract: Electron beam smelting (EBS) has been used to fabricate the Inconel 740 superalloy. Microstructures, hardness, and deformation characteristics of the alloy are studied. The average size of the secondary phase is < 30 nm after aging treatment and the average Vickers hardness is measured to be about 370. The critical shear stress is calculated to be 0.627 GPa with governing mechanism of shearing, causing a stronger strengthening effect than the traditionally prepared Inconel 740 superalloy. The EBS 740 superalloy shows higher flow stress than 740H at low Zener-Hollomon parameter, which may arise from the undissolved γ′ precipitates and higher activation energy Q. The EBS technology shows encouraging potential in preparation of nickel-based superalloys. Morphologies of γ′ precipitates and Vickers hardness as well as hot compression curves for electron beam smelting 740 superalloy. - Highlights: • Electron beam smelting, a novel method, was used to prepare the Inconel 740 superalloy. • The average size of the γ′ precipitates after aging treatment is < 30 nm. • The shearing mode generates a stronger strengthening effect than the traditional 740. • At low Zener-Hollomon parameter, the EBS 740 shows higher flow stress than 740H.

36 MATERIALS SCIENCE↗

Building a Cyberinfrastructure for Environmental System Science: Modeling Frameworks, Data Management, and Scientific Workflows, Workshop Report, Potomac, Maryland, April 30-May 1, 2015

The Environmental System Science (ESS) activity within the Department of Energy’s (DOE) Office of Biological and Environmental Research (BER) seeks to advance a robust, predictive understanding of terrestrial environments, extending from bedrock to the top of the vegetative canopy and from molecular to global scales, through an iterative cycle of model-driven experimentation and observation dubbed MODEX. Considerable progress has been made toward achieving this overarching goal, but widely recognized is the fragmentation across projects and disciplines of the relevant modeling and simulation capabilities, observational and experimental data, analysis algorithms, and workflow tools. This fragmentation creates significant challenges for studying impacts and feedbacks in these complex multiscale systems. These challenges are further exacerbated by ongoing disruptive changes in high-performance computational architectures and the exponential growth in the types and volume of data that render obsolete the conventional approaches to software development and data management. Overcoming these challenges will require the development of a BER Climate and Environmental Sciences Division (CESD)–wide enabling cyberinfrastructure to support data management, cross-domain modeling, data analysis, and collaborative research. To explore the potential for working groups to initiate and guide a more integrated and community-based cyberinfrastructure, BER held the ESS Workshop on Model-Data Integration: Modeling Frameworks, Data Management, and Scientific Workflows on April 30-May 1, 2015, following the ESS Principal Investigator Meeting in Potomac, Maryland. Participants included model developers, software engineers, and data management specialists from eight national laboratories, which represented a wide range of projects and programs from CESD as well as cross-cutting projects from DOE’s Office of Advanced Scientific Computing Research (ASCR; both BER and ASCR are operated from within DOE’s Office of Science). A series of plenary talks provided background information and clarified the workshop’s three objectives: (1) develop requirements for this community-based cyberinfrastructure to ensure enhanced scientific productivity of the community as a whole; (2) identify challenges associated with developing this new cyberinfrastructure using a phased approach guided by project-driven use cases; and, given these requirements and challenges, (3) chart a path forward for ESS working groups to lead the phased development of the new cyberinfrastructure.

54 ENVIRONMENTAL SCIENCES↗

Investigation of structural, optical, electrical and dielectric properties of catalytic sprayed hausmannite thin film

Hausmannite Mn{sub 3}O{sub 4} thin film have been synthesized using spray pyrolysis method. These films are characterized using X-ray diffraction (XRD), atomic force microscope AFM, UV–vis–NIR spectroscopy and impedance spectroscopy. XRD study confirms the tetragonal structure of the as-deposited films with lattice parameters, a = 5.1822 Å and c = 9.4563 Å and a grain size of about 56 nm. UV–vis–NIR spectroscopy was further used to estimate optical constants such as extinction coefficient, refractive index, band gap and Urbach energy. Moreover, impedance spectroscopy analysis was employed to estimate electrical and dielectrical properties of the sprayed thin films. The activation energy values deduced from DC conductivity and relaxation frequency were almost the same, revealing that the transport phenomena is thermally activated by hopping between localized states. The AC conductivity is found to be proportional to ω{sup s}. The temperature dependence of the AC conductivity and the frequency exponent, s was reasonably well interpreted in terms of the correlated barrier-hopping CBH model. The dielectric properties were sensitive to temperature and frequency. The study of the electrical modulus indicated that the charge carrier was localized. Experimental results concerning optical constants as Urbach energy, dielectric constant, electric modulus and AC and DC conductivity were discussed in terms of the hopping model as suggested by Elliott.

36 MATERIALS SCIENCE↗