Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Plasmonic Based Sensing Using an Array of Au-Metal Oxide Thin Films

An optical plasmonic-based sensing array has been developed and tested for the selective and sensitive detection of H2, CO, and NO2 at a temperature of 500°C in an oxygen-containing background. The three element sensing array used Au nanoparticles embedded in separate thin films of yttria stabilized zirconia (YSZ), CeO2, and TiO2. A peak in the absorbance spectrum due to a localized surface plasmon resonance (LSPR) on the Au nanoparticles was monitored for each film during gas exposures and showed a blue shift in the peak positions for the reducing gases, H2 and CO, and a red shift for the oxidizing gas NO2. A more in-depth look at the sensing response was performed using the multivariate methods of principal component analysis (PCA) analysis and linear discriminant analysis (LDA) on data from across the entire absorbance spectrum range. Qualitative results from both methods showed good separation between the three analytes for both the full array and the Au-TiO2 sample. Quantification of LDA cluster separation using the Mahalanobis distance showed better cluster separation for the array, but there were some instances with the lowest concentrations where the single Au-TiO2 film had better separation than the array. A second method to quantify cluster separation in LDA space was developed using multidimensional volume analysis of the individual cluster volume, overlapped cluster volume and empty volume between clusters. Compared to the individual sensing elements, the array showed less cluster overlap, smaller cluster volumes, and more space between clusters, all of which were expected for improved separability between the analytes.

Environmental Molecular Sciences Laboratory↗

All Roads Lead to TiO 2 : TiO 2 -Rich Surfaces of Barium and Strontium Titanate Prepared by Hydrothermal Synthesis

Through high-resolution electron microscopy, the surface structure of barium titanate and strontium titanate nanoparticles are found to be terminated by a TiO 2 double layer. These results confirm prior observations of TiO 2 -rich surface reconstructions on strontium titanate nanoparticles made hydrothermally at high pH and single crystals prepared with wet chemical etching. Of all the reconstructions observed on single crystals for these two materials, we report for first time the √13 × √13R33.7° structure on the {001} facets of hydrothermally prepared barium titanate and strontium titanate nanocrystals. The aqueous environment common to the two preparation methods preferentially leaves strontium and barium depleted from the A-sites near the surface and leads to TiO 2 -terminated surfaces for both materials. Analysis indicates that the observed structures are the thermodynamic lowest energy structures in aqueous conditions.

36 MATERIALS SCIENCE↗

Continuous Structural Transition in Glass-Forming Molten Titanate BaTi 2 O 5

The structure of the model titanate glass former BaTi2O5 has been studied over a wide temperature (T) range in the molten, supercooled, and glassy states under conditions of aerodynamic levitation. Both high-energy X-ray diffraction and Ti K-edge X-ray absorption spectroscopy reveal a continuous structural transition involving reduction of the cation-oxygen (and oxygen-cation) average coordination numbers and bond lengths with increasing T. Ti-0 coordination in the moderately supercooled and equilibrium melt follows a linear trend n(Tio) = 5.4(1)- [3.5(7) x 10(-4)]T [K] (1300 <= T <= 1830 K, T-g = 960 K, T-m = 1660 K). Comparison to the melt-quenched glass implies an increase in partial derivative n(Tio)/partial derivative T at lower T, as T-g is approached from above. Both Ba-0 coordination and bond length also decrease at higher T, and the role of Ba addition is to reduce n(Tio) below its value in pure molten TiO2, which is related to the presence of density maxima in molten BaO-TiO2. Density measurements made by imaging of the levitated melt yielded rho(T) = 4.82(55)- 0.0004(3)T in units of K and g cm(-3). While BaTi2O5 glass likely consists of a fully connected Ti-0 network, free of nonbridging oxygen (NBO) [OTi1 and with at least 13(4)% [OTi3] triclusters, the 1835(40) K equilibrium melt contains at least 10(4)% NBO along with 90(4)% bridging oxygen [OTi2]. The results highlight the fact that glasses can be considered as structural analogues of melts only for those melts deeply supercooled into the glass transition region. The results imply possible fictive T dependence of titanate glass structure, suggesting applications as, e.g., laser written waveguides with large refractive indices and refractive index contrasts. The temperature-dependent structure further implies a super-Arrhenian melt viscosity with consequences for glass manufacture, titanate-rich slags produced in iron smelting, TiO2-bearing magmas, and by analogy silicate melts at high pressures, as found in planetary interiors.

36 MATERIALS SCIENCE↗

Adsorption and Photodesorption of CO from Charged Point Defects on TiO 2 (110)

Adsorption and photodesorption of weakly-bound carbon monoxide, CO, from reduced and hydroxylated rutile TiO2(110) (r- and h- TiO2(110)) at sub-monolayer coverages is studied with atomically-resolved scanning tunneling microscopy (STM) along with ensemble-averaged temperature-programmed desorption (TPD) and angle-resolved photon-stimulated desorption (PSD) at low temperatures ( 50 K). STM data weighted by the concentration of each kind of adsorption sites on r-TiO2(110) give an adsorption probability which is the highest for the bridging oxygen vacancies (VO) and very low for the Ti5c sites closest to VO. Occupancy of the remaining Ti5c sites with CO is significant, but smaller than for VO. The probability distribution for the different adsorption sites corresponds to a very small difference in CO adsorption energies: < 0.02 eV. We also find that UV irradiation stimulates both diffusion and desorption of CO at low temperature. CO photodesorbs primarily from the vacancies with a bi-modal angular distribution. In addition to a major, normal to the surface component, there is a broader cosine component indicating scattering from the surface which likely also leads to photo-stimulated diffusion. Hydroxylation of VO’s does not significantly change the CO PSD yield and angular distribution, indicating that not atomic but rather electronic surface defects are involved in the site-specific PSD process. We suggest that photodesorption can be initiated by recombination of photo-generated holes with excess unpaired electrons localized near the surface point-defect (either VO or bridging hydroxyl), leading to the surface atoms rearrangement and ejection of the weakly-bound CO molecules.

Environmental Molecular Sciences Laboratory↗

Determining the Conduction Band-Edge Potential of Solar-Cell-Relevant Nb{sub 2}O{sub 5} Fabricated by Atomic Layer Deposition

Often key to boosting photovoltages in photo electrochemical and related solar-energy-conversion devices is the preferential slowing of rates of charge recombination especially recombination at semiconductor/solution, semiconductor/polymer, or semiconductor/perovskite interfaces. In devices featuring TiO2 as the semiconducting component, a common approach to slowing recombination is to install an ultrathin metal oxide barrier layer or trap-passivating layer atop the semiconductor, with the needed layer often being formed via atomic layer deposition (ALD). A particularly promising barrier layer material is Nb2O5. Its conduction-band-edge potential Ecg is low enough that charge injection from an adsorbed molecular, polymeric, or solid-state light absorber and into the semiconductor can still occur, but high enough that charge recombination is inhibited. While a few measurements of Ecg have been reported for conventionally synthesized, bulk Nb2O5, none have been described for ALD-fabricated versions. Here, we specifically determine the conduction-band-edge energy of ALD-fabricated Nb2O5 relative to that of TiO2. We find that, while the value for ALD-Nb2O5 is indeed higher than that for TiO2, the difference is less than anticipated based on measurements of conventionally synthesized Nb2O5 and is dependent on the thermal history of the material. The implications of the findings for optimization of competing interfacial rate processes, and therefore photovoltages, are briefly discussed.

Hoffeditz, William L.↗

Computational Approach for Epitaxial Polymorph Stabilization through Substrate Selection

With the ultimate goal of finding new polymorphs through targeted synthesis conditions and techniques, we outline a computational framework to select optimal substrates for epitaxial growth using first principle calculations of formation energies, elastic strain energy, and topological information. To demonstrate the approach, we study the stabilization of metastable VO2 compounds which provides a rich chemical and structural polymorph space. We find that common polymorph statistics, lattice matching, and energy above hull considerations recommends homostructural growth on TiO2 substrates, where the VO2 brookite phase would be preferentially grown on the a-c TiO2 brookite plane while the columbite and anatase structures favor the a-b plane on the respective TiO2 phases. Overall, we find that a model which incorporates a geometric unit cell area matching between the substrate and the target film as well as the resulting strain energy density of the film provide qualitative agreement with experimental observations for the heterostructural growth of known VO2 polymorphs: rutile, A and B phases. The minimal interfacial geometry matching and estimated strain energy criteria provide several suggestions for substrates and substrate-film orientations for the heterostructural growth of the hitherto hypothetical anatase, brookite, and columbite polymorphs. These criteria serve as a preliminary guidance for the experimental efforts stabilizing new materials and/or polymorphs through epitaxy. The current screening algorithm is being integrated within the Materials Project online framework and data and hence publicly available.

36 MATERIALS SCIENCE↗

TiO 2 -Assisted Photoisomerization of Azo Dyes Using Self-Assembled Monolayers: Case Study on para -Methyl Red Towards Solar-Cell Applications

The optical and electronic properties of a TiO2 nanoparticle-assisted photo-isomerizable surface, prepared by an azo dye/TiO2 nanocomposite film, are examined experimentally and computationally. The azo dye, para-methyl red, undergoes photoisomerization at room temperature, catalyzed by the TiO2 nanoparticle supports, while it exhibits negligible photoisomerization in solvents under otherwise identical conditions. Density functional theory and time-dependent density functional theory are employed to explain the origin of this photoisomerization in these dye…TiO2 nanoparticle self-assembled monolayers (SAMs). The device performance of these SAMs when embedded into dye-sensitized solar cells is used to further elucidate the nature of this azo dye photoisomerization and relate it to the ensuing optoelectronic properties.

Zhang, Lei↗

Variation in Optoelectronic Properties of Azo Dye-Sensitized TiO 2 Semiconductor Interfaces with Different Adsorption Anchors: Carboxylate, Sulfonate, Hydroxyl and Pyridyl Groups

The optoelectronic properties of four azo dye-sensitized TiO2 interfaces are systematically studied as a function of a changing dye anchoring group: carboxylate, sulfonate, hydroxyl, and pyridyl. The variation in optoelectronic properties of the free dyes and those in dye/TiO 2 nanocomposites are studied both experimentally and computationally, in the context of prospective dye-sensitized solar cell (DSSC) applications. Experimental UV/vis absorption spectroscopy, cyclic voltammetry, and DSSC device performance testing reveal a strong dependence on the nature of the anchor of the optoelectronic properties of these dyes, both in solution and as dye/TiO2 nanocomposites. First-principles calculations on both an isolated dye/TiO2 cluster model (using localized basis sets) and each dye modeled onto the surface of a 2D periodic TiO2 nanostructure (using plane wave basis sets) are presented. Detailed examination of these experimental and computational results, in terms of light harvesting, electron conversion and photovoltaic device performance characteristics, indicates that carboxylate is the best anchoring group, and hydroxyl is the worst, whereas sulfonate and pyridyl groups exhibit competing potential. Different sensitization solvents are found to affect critically the extent of dye adsorption achieved in the dye-sensitization of the TiO2 semiconductor, especially where the anchor is a pyridyl group.

anchor↗

Au ↔ N Synergy and N-Doping of Metal Oxide-Based Photocatalysts

N-doping of titania makes photocatalytic activity possible for the splitting of water, and other reactions, under visible light. Here, we show from both theory and experiment that Au preadsorption on TiO2 surfaces significantly increases the reachable amount of N implanted in the oxide. The stabilization of the embedded N is due to an electron transfer from the Au 6s levels toward the N 2p levels, which also increases the Au-surface adhesion energy. Theoretical calculations predict that Au can also stabilize embedded N in other metal oxides with photocatalytic activity, such as SrTiO3 and ZnO, producing new states above the valence band or below the conduction band of the oxide. In experiments, the Au/TiNxO2-y system was found to be more active for the dissociation of water than TiO2, Au/TiO2, or TiO2-y. Furthermore, the Au/TiNxO2-y surfaces were able to catalyze the production of hydrogen through the water-gas shift reaction (WGS) at elevated temperatures (575-625 K), displaying a catalytic activity superior to that of pure copper (the most active metal catalysts for the WGS) or Cu nanoparticles supported on ZnO.

08 HYDROGEN↗

Development of Highly Active Titania-Based Nanoparticles for Energetic Materials

Recent advances in nanostructured fuels and oxidizers may lead to high-performance energetic materials for propulsion, but these nanoparticulates present serious challenges due to their inherent instability and safety hazards and difficulty of manufacture. In this paper, we develop an alternate route, the use of nanoscale metal-oxides to catalyze reactions between micrometer-scale energetic constituents. Methods to synthesize TiO2-based nanoparticles that are highly active toward energetic reactions and effectively incorporate them into energetic composites are reported. Activity was maximized by tuning the physical and chemical properties of the nano-TiO2 dispersion in the composite. An 81% increase in combustion rate was achieved with a nanoparticle loading of 1 wt %, making energetically active nano-TiO2 a viable material for advanced propulsion, without the hazards and difficulties of competing technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nature of Ptn/TiO2(110) Interface under Water-Gas Shift Reaction Conditions: A Constrained ab Initio Thermodynamics Study

The electronic structure of small Ptn (n = 1-8) clusters supported on the stoichiometric and partially reduced rutile TiO2(110) surface have been investigated using density functional theory. Pt atoms prefer to form a close-packed structure with (111) facet near an oxygen vacancy of the TiO2 support and a less dense structure with (100) facet away from oxygen vacant sites. Themain focus of this study is on identifying a realistic catalyst model for the Pt/TiO2 interface under watergas shift (WGS) reaction conditions. Constrained ab initio thermodynamic simulations on the stability of oxygen vacancies and formation of adsorbed gas phase molecules such as oxygen, CO, and hydrogen at the metal/oxide interface reveal that under WGS reaction conditions the formation of surface oxygen vacancies are thermodynamically favorable, platinum oxide species (PtOx) can easily be reduced and should not be present, CO adsorbs only weakly on interfacial Pt atoms, and CO poisoning of these sites should be less important. While hydrogen generally interacts weakly with interfacial Pt atoms, it forms very stable hydride species on Pt atoms neighboring an oxygen vacancy of the TiO2(110) support, possibly negatively affecting the WGS reaction rate.

Environmental Molecular Sciences Laboratory↗

Low-Temperature Synthesis of Tunable Mesoporous Crystalline Transition Metal Oxides and Applications as Au Catalyst Supports

Mesoporous transition metal oxides are of great potential as catalyst supports, shape-selective catalysts, photocatalysts, and sensor materials. Previously stable crystalline mesoporous oxides were mostly obtained by thermally induced crystallization or by segregating the nanocrystals with an amorphous phase. Here we report a novel direct approach to crystalline mesoporous frameworks via the spontaneous growth and assembly of transition metal oxide nanocrystals (i.e., rutile TiO2, fluorite CeO2, cassiterite SnO2, and anatase SnxTi1-xO2) by oxidative hydrolysis and condensation in the presence of anionic surfactants. The influences of synthesis time, surfactants with different chain lengths, concentrations of the oxidant (i.e., hydrogen peroxide), and synthesis temperatures on the composition and morphologies of the resulting materials were investigated by X-ray diffraction (XRD), N2-sorption, transmission electron microscopy (TEM), selected area electron diffraction (SAED), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). A mechanism for the templated synthesis of crystalline mesoporous metal oxides was tentatively proposed. To demonstrate the catalytic applications of these materials, gold nanoparticles were loaded on mesoporous rutile TiO2 and fluorite CeO2 supports, and their catalytic performance in CO oxidation and water-gas shift was surveyed. Au nanoparticles supported on the mesoporous crystalline metal oxides exhibit higher reactivity and excellent on-stream stability towards CO oxidation and water-gas shift reaction compared with commercial TiO2 and CeO2.

08 HYDROGEN↗

MoS 2 /TiO 2 heterostructures as nonmetal plasmonic photocatalysts for highly efficient hydrogen evolution

In this study, we report a nonmetal plasmonic MoS2@TiO2 heterostructure for highly efficient photocatalytic H2 generation. Large area laminated Z-scheme MoS2 in conjunction with TiO2 nanocavity arrays are achieved via carefully controlled anodization, physical vapor deposition, and chemical vapor deposition processes. Broad spectral response ranging from ultraviolet (UV)-visible (vis) to near-infrared (NIR) wavelengths and finite element frequency-domain simulation suggest that this MoS2@TiO2 heterostructured photocatalyst possesses an enhanced activity for H+ reduction. A high H2 yield rate of 580 mmol h-1 g-1 is achieved using a low catalyst loading mass of 10.2 μg. The spatially uniform heterostructure, correlated to plasmon-resonance through conformal coating MoS2 that effectively regulated charge transfer pathways, is proven to be vitally important for the unique solar energy harvesting and photocatalytic H2 production. As an innovative exploration, our study demonstrates that the photocatalytic activities of nonmetal, earth-abundant materials can be enhanced with plasmonic effects, which may serve as an excellent catalytic agent for solar energy conversion to chemical fuel. Periodically patterned MoS 2 /TiO 2 heterostructures were rationally designed as nonmetal plasmonic photocatalysts for highly efficient hydrogen evolution.

Environmental Molecular Sciences Laboratory↗

A contactless in situ EFISH method for measuring electrostatic potential profile of semiconductor/electrolyte junctions

In photoelectrochemical cells, promising devices for directly converting solar energy into storable chemical fuels, the spatial variation of the electrostatic potential across the semiconductor–electrolyte junction is the key parameter that determines the cell performance. In principle, electric field induced second harmonic generation (EFISH) provides a contactless in situ spectroscopic tool to measure the spatial variation of electrostatic potential. However, the total second harmonic generation (SHG) signal contains the contributions of the EFISH signals of semiconductor space charge layer and the electric double layer, in addition to the SHG signal of the electrode surface. The interference of these complex quantities hinders their analysis. In this work, to understand and deconvolute their contributions to the total SHG signals, bias-dependent SHG measurements are performed on the rutile TiO2(100)–electrolyte junction as a function of light polarization and crystal azimuthal angle (angle of the incident plane relative to the crystal [001] axis). A quadratic response between SHG intensity and the applied potential is observed in both the accumulation and depletion regions of TiO2. The relative phase difference and amplitude ratio are extracted at selected azimuthal angles and light polarizations. At 0° azimuthal angle and s-in–p-out polarization, the SHG intensity minimum has the best match with the TiO2 flatband potential due to the orthogonal relative phase difference between bias-dependent and bias-independent SHG terms. We further measure the pH-dependent flatband potential and probe the photovoltage under open circuit conditions using the EFISH technique, demonstrating the capability of this contactless method for measuring electrostatic potential at semiconductor–electrolyte junctions.

Chemistry↗

Bandgap narrowing of titanium oxide semiconductors by non-compensated anion-cation codoping for enhanced visible-light photoactivity

Titanium dioxide (TiO2) is widely recognized as one of the most promising photocatalysts for solar energy utilization and environmental cleanup, but because of its wide bandgap, pure TiO2 can only absorbs ultraviolet light, which represents 4% of the solar spectrum1-6. Here we establish a conceptually novel approach, termed non-compensated n-p codoping, to narrow the bandgap of TiO2 and shift the optical response into the visible spectral range where a much larger fraction of the solar spectrum can be captured. The concept embodies two key ingredients: The electrostatic attraction within the n-p dopant pair enhances the thermodynamic and kinetic solubility in substitutional doping, and the non-compensated nature ensures the creation of broadened intermediate electronic states that effectively narrow the bandgap. The concept is demonstrated quantitatively within first-principles density functional theory. The experimental evidence for bandgap narrowing is obtained in the forms of direct measurements of the density of states by scanning tunneling spectroscopy, dramatically redshifted and increased optical absorbance, and enhanced photoactivity manifested by efficient hole-electron separation in the visible spectral region. These findings represent the first crucial steps toward development of a new class of titania-based photocatalysts with greatly enhanced efficiency of solar energy conversion facilitating environmentally friendly applications ofrenewable energy.

14 SOLAR ENERGY↗

High Temperature Integrated Thermoelectric Ststem and Materials

The final goal of this project is to produce, by the end of Phase II, an all ceramic high temperature thermoelectric module. Such a module design integrates oxide ceramic n-type, oxide ceramic p-type materials as thermoelectric legs and oxide ceramic conductive material as metalizing connection between n-type and p-type legs. The benefits of this all ceramic module are that it can function at higher temperatures (> 700 C), it is mechanically and functionally more reliable and it can be scaled up to production at lower cost. With this all ceramic module, millions of dollars in savings or in new opportunities recovering waste heat from high temperature processes could be made available. A very attractive application will be to convert exhaust heat from a vehicle to reusable electric energy by a thermoelectric generator (TEG). Phase I activities were focused on evaluating potential n-type and p-type oxide compositions as the thermoelectric legs. More than 40 oxide ceramic powder compositions were made and studied in the laboratory. The compositions were divided into 6 groups representing different material systems. Basic ceramic properties and thermoelectric properties of discs sintered from these powders were measured. Powders with different particles sizes were made to evaluate the effects of particle size reduction on thermoelectric properties. Several powders were submitted to a leading thermoelectric company for complete thermoelectric evaluation. Initial evaluation showed that when samples were sintered by conventional method, they had reasonable values of Seebeck coefficient but very low values of electrical conductivity. Therefore, their power factors (PF) and figure of merits (ZT) were too low to be useful for high temperature thermoelectric applications. An unconventional sintering method, Spark Plasma Sintering (SPS) was determined to produce better thermoelectric properties. Particle size reduction of powders also was found to have some positive benefits. Two composition systems, specifically 1.0 SrO - 0.8 x 1.03 TiO2 - 0.2 x 1.03 NbO2.5 and 0.97 TiO2 - 0.03 NbO2.5, have been identified as good base line compositions for n-type thermoelectric compositions in future module design. Tests of these materials at an outside company were promising using that company's processing and material expertise. There was no unique p-type thermoelectric compositions identified in phase I work other than several current cobaltite materials. Ca3Co4O9 will be the primary p-type material for the future module design until alternative materials are developed. BaTiO3 and rare earth titanate based dielectric compositions show both p-type and n-type behavior even though their electrical conductivities were very low. Further research and development of these materials for thermoelectric applications is planned in the future. A preliminary modeling and optimization of a thermoelectric generator (TEG) that uses the n-type 1.0 SrO - 1.03 x 0.8 TiO2 - 1.03 x 0.2 NbO2.5 was performed. Future work will combine development of ceramic powders and manufacturing expertise at TAM, development of SPS at TAM or a partner organization, and thermoelectric material/module testing, modeling, optimization, production at several partner organizations.

25 ENERGY STORAGE↗

FEEDSTOCK-FLEXIBLE REFORMER SYSTEM (FFRS) FOR SOLID OXIDE FUEL CELL (SOFC)- QUALITY SYNGAS

The U.S. Department of Energy National Energy Technology Laboratory funded this research collaboration effort between NextEnergy and the University of Michigan, who successfully designed, built, and tested a reformer system, which produced highquality syngas for use in SOFC and other applications, and a novel reactor system, which allowed for facile illumination of photocatalysts. Carbon and raw biomass gasification, sulfur tolerance of non-Platinum Group Metals (PGM) based (Ni/CeZrO2) reforming catalysts, photocatalysis reactions based on TiO2, and mild pyrolysis of biomass in ionic liquids (ILs) were investigated at low and medium temperatures (primarily 450 to 850 C) in an attempt to retain some structural value of the starting biomass. Despite a wide range of processes and feedstock composition, a literature survey showed that, gasifier products had narrow variation in composition, a restriction used to develop operating schemes for syngas cleanup. Three distinct reaction conditions were investigated: equilibrium, autothermal reforming of hydrocarbons, and the addition of O2 and steam to match the final (C/H/O) composition. Initial results showed rapid and significant deactivation of Ni/CeZrO2 catalysts upon introduction of thiophene, but both stable and unstable performance in the presence of sulfur were obtained. The key linkage appeared to be the hydrodesulfurization activity of the Ni reforming catalysts. For feed stoichiometries where high H2 production was thermodynamically favored, stable, albeit lower, H2 and CO production were obtained; but lower thermodynamic H2 concentrations resulted in continued catalyst deactivation and eventual poisoning. High H2 levels resulted in thiophene converting to H2S and S surface desorption, leading to stable performance; low H2 levels resulted in unconverted S and loss in H2 and CO production, as well as loss in thiophene conversion. Bimetallic catalysts did not outperform Ni-only catalysts, and small Ni particles were found to have lower activities under S-free conditions, but did show less effect of S on performance, in this study. Imidazolium-based ILs, choline chloride compounds and low-melting eutectics of metal nitrates were evaluated, and it was found that, ILs have some capacity to dissolve cellulose and show thermal stability to temperatures where pyrolysis begins, have no vapor pressure, (simplifying product recoveries), and can dissolve ionic metal salts, allowing for the potential of catalytic reactions on breakdown intermediates. Clear evidence of photoactive commercial TiO2 was obtained, but in-house synthesis of photoactive TiO2 proved difficult, as did fixed-bed gasification, primarily due to the challenge of removing the condensable products from the reaction zone quickly enough to prevent additional reaction. Further investigation into additional non-PGM catalysts and ILs is recommended as a follow-up to this work.

09 BIOMASS FUELS↗