Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Self-Assembly of Metal-Oxide Nanoparticles into Hierarchically Patterned Porous Architectures using Ionic Liquid/Oil Emulsions

Hierarchically patterned macroporous TiO2 structures can be fabricated via the spontaneous self-assembly of TiO2 nanoparticles prepared using a mixture of 1-octadecene (ODE) and an ODE-immiscible 1-alkyl-3-methylimidazolium-based ionic liquid as the reaction medium. A study of the influence of side chain lengths of ionic liquids (n = 4, 8, or 16) reveals that this parameter can be further used to fine-tune the morphologies of the products. This synthetic methodology can also be extended to the formation of patterned macroporous ZrO2 and Fe3O4 structures. Finally, the potential reasons for the formation of hierarchical structures are discussed and the implications to further research are proposed.

Zhou, Shenghu↗

Tuning piezoelectric properties through epitaxy of La 2 Ti 2 O 7 and related thin films

Current piezoelectric sensors and actuators are limited to operating temperatures less than ~200ºC due to the low Curie temperature of the piezoelectric material. The strengthening the piezoelectric coupling of high-temperature piezoelectric materials, such as La 2 Ti 2 O 7 (LTO), would allow sensors to operate across a broad temperature range. The crystalline orientation and piezoelectric coupling direction of LTO thin films can be controlled by epitaxial matching to SrTiO 3 (001), SrTiO 3 (110), and rutile TiO 2 (110) substrates via pulsed laser deposition. The structure and phase purity of the films are investigated by x-ray diffraction and scanning transmission electron microscopy. Piezoresponse force microscopy is used to measure the in-plane and out-of-plane piezoelectric coupling in the films. The strength of the out-of-plane piezoelectric coupling can be increased when the piezoelectric direction is rotated partially out-of-plane via epitaxy. The strongest out-of-plane coupling is observed for LTO/STO(001). Deposition on TiO 2 (110) results in epitaxial La 2/3 TiO 3 , an orthorhombic perovskite of interest as a microwave dielectric material and an ion conductor. La 2/3 TiO 3 can be difficult to stabilize in bulk form, and epitaxial stabilization on TiO 2 (110) is a promising route to realize La 2/3 TiO 3 for both fundamental studies and device applications. Overall, these results confirm that control of the crystalline orientation of epitaxial LTO-based materials can govern the resulting functional properties.

36 MATERIALS SCIENCE↗

NiO as a peculiar support for metal nanoparticles in polyols oxidation

The peculiar influence of a NiO support was studied by preparing gold catalysts supported on NiO(1-x) –TiO2(x) mixed oxides. PVA protected Au nanoparticles showed high activity when supported on NiO for the selective oxidation of glycerol and ethan-1,2-diol. A detailed characterization of the resulting Au catalysts revealed a preferential deposition of the metal nanoparticles on the NiO phase. However, the activity of Au on NiO(1-x)-TiO2(x) decreased with respect to pure NiO and the selectivity evolved with changes to the support.

Villa, Alberto↗

Composition dependent intrinsic defect structures in SrTiO3

Intrinsic point defect complexes in SrTiO3 under different chemical conditions are studied using density functional theory. The Schottky defect complex consisting of nominally charged Sr, Ti and O vacancies is predicted to be the most stable defect structure in stoichiometric SrTiO3, with a relatively low formation energy of 1.64 eV/defect. In addition, the mechanisms of defect complex formation in nonstoichiometric SrTiO3 are investigated. Excess SrO leads to the formation of the oxygen vacancies and a strontium-titanium antisite defect, while a strontium vacancy together with an oxygen vacancy and the titanium-strontium antisite defect are produced in an excess TiO2 environment. Since point defects, such as oxygen vacancies and cation antisite defects, are intimately related to the functionality of SrTiO3, these results provide guidelines for controlling the formation of intrinsic point defects and optimizing the functionality of SrTiO3 by controlling nonstoichiometric chemical compositions of SrO and TiO2 in experiments.

defects↗

Crystal and Electronic Structure of Lithiated Nanosized RutileTiO2 by Electron Diffraction and Electron Energy-loss Spectroscopy

The electronic structure of the nanosized rutile TiO2 before and after mechanical lithiation were studied using TEM and EELS. EELS reveals the Li K-edge at the energy-loss position of ~ 61 eV. After lithiation, the separation of the t2g-eg crystal-field splitting on both Ti L2,3-edge and O K-edge decreases, the O K-edge shifts towards a higher energy-loss position and the separation between the pre-edge peak and main peak on the O K-edge decreases. These results suggest that the lithiation of rutile TiO2 was accompanied by the reduction of Ti ion and a charge transfer from Li to Ti.

36 MATERIALS SCIENCE↗

Improvement of catalytic activity of Fe{sub 3}O{sub 4}/CuO/TiO{sub 2} nanocomposites using the combination of ultrasonic and UV light irradiation for degradation of organic dyes

Iron-copper-titania mixed oxides was synthesized with Fe3O4/CuO to various TiO2 molar ratio using sol-gel method at low temperature and the intrinsic characteristics were studied by a variety of techniques such as X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and BET surface area analyzer. The results demonstrate that all samples contained Fe3O4, CuO and TiO2 structures and exhibited ferromagnetic behavior at room temperature. In this study, methylene blue is used as a model of organic dyes. The degradation of methylene blue was observed using sonocatalysis and photocatalysis systems simultaneously. The experimental results showed that kinetic data followed the pseudo-first order model and the apparent rate constant of simultaneously processes of sonocatalysis and photocatalysis is higher than the respective individual processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of ZnO/CuO and TiO{sub 2}/CuO nanocomposites for light and ultrasound assisted degradation of a textile dye in aqueous solution

ZnO/CuO and TiO2/CuO nanocomposites with different Zn/Cu and Ti/Cu ratios were prepared using sol-gel method. The obtained composite samples were used as catalyst. Methylene blue was used as a model of textile dye to evaluate their photocatalytic, sonocatalytic and photosonocatalytic activities. X-ray diffraction and energy dispersive X- ray analysis confirmed that only monoclinic CuO and hexagonal wurtzite ZnO structures are present in ZnO/CuO nanocomposites, while in TiO2/CuO nanocomposites monoclinic CuO and anatase TiO2 structures were observed. The degradation of methylene blue indicated that the incorporation of CuO in ZnO/CuO and TiO2/CuO nanocomposites exhibited an appreciable higher photocatalytic activity, which was mainly attributed to the extended photoresponding range and more light energy could be utilized than pure ZnO and TiO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Catalytic Activity of Au/CeOx/TiO2(110) Controlled by the Nature of the Mixed Metal Oxide at the Nanometer Level

Mixed-metal oxides play a very important role in many areas of chemistry, physics, materials science, and geochemistry. Recently, there has been a strong interest in understanding phenomena associated with the deposition of oxide nanoparticles on the surface of a second (host) oxide. Here, scanning tunneling microscopy, photoemission, and density-functional calculations are used to study the behavior of ceria nanoparticles deposited on a TiO2(110) surface. The titania substrate imposes nontypical coordination modes on the ceria nanoparticles. In the CeOx/TiO2(110) systems, the Ce cations adopt an structural geometry and an oxidation state (+3) that are quite different from those seen in bulk ceria or for ceria nanoparticles deposited on metal substrates. The increase in the stability of the Ce3+ oxidation state leads to an enhancement in the chemical and catalytic activity of the ceria nanoparticles. The codeposition of ceria and gold nanoparticles on a TiO2(110) substrate generates catalysts with an extremely high activity for the production of hydrogen through the water-gas shift reaction (H2O + CO ? H2 + CO2) or for the oxidation of carbon monoxide (2CO + O2 ? 2CO2). The enhanced stability of the Ce3+ state is an example of structural promotion in catalysis described here on the atomic level. The exploration of mixed-metal oxides at the nanometer level may open avenues for optimizing catalysts through stabilization of unconventional surface structures with special chemical activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of MgO during Chemical Magnesiation of Mg-Ion Battery Materials

Chemical magnesiation phenomena of α-MnO2, V2O5 and h-TiO2 using dibutyl magnesium has been studied using a long range (XRD) and a short range structural probe (NMR). XRD showed no significant phase transformations in the bulk whereas color change has been observed for TiO2 and V2O5 after treatment. 25Mg MAS NMR showed significant amorphous MgO formation for samples with color change which is suggestive of concomitant transition metal reduction on the surface. No significant bulk magnesiation due to intercalation has been observed for any of the oxides treated with dibutyl magnesium.

Wang, H.↗

Ultrafast thin-film laser-induced breakdown spectroscopy of doped oxides

Single-shot femtosecond laser induced breakdown spectroscopy (LIBS) has been shown to be an effective means of detecting heavy metal dopants in porous thin films. Traditional LIBS analysis of trace dopants in modern painted surfaces or TiO2 films is difficult due to the broad noisy spectra of the titanium constituent and interference due to the substrate material. Femtosecond laser pulses provide excellent ablation of the target material with little damage to the underlying substrate. In this study a Ti:sapphire femtosecond laser pulse operated at 800 and 266 nm wavelengths and an Nd:YAG nanosecond laser operated at 266 nm were used to ablate 0.15-15 {mu}m films of TiO2 doped with varying amounts of MgO. This application shows excellent detection of Mg down to 60 ppm with little interference by the substrate material.

36 MATERIALS SCIENCE↗

Materials Data on Ti2O7 by Materials Project

Ti2O7 is Low Tridymite-like structured and crystallizes in the triclinic P1 space group. The structure is two-dimensional and consists of two trioxidane molecules and one TiO2 sheet oriented in the (0, 0, 1) direction. In the TiO2 sheet, there are four inequivalent Ti sites. In the first Ti site, Ti is bonded to four O atoms to form corner-sharing TiO4 tetrahedra. There are a spread of Ti–O bond distances ranging from 1.82–1.84 Å. In the second Ti site, Ti is bonded to four O atoms to form corner-sharing TiO4 tetrahedra. There is one shorter (1.82 Å) and three longer (1.83 Å) Ti–O bond length. In the third Ti site, Ti is bonded to four O atoms to form corner-sharing TiO4 tetrahedra. There is two shorter (1.82 Å) and two longer (1.83 Å) Ti–O bond length. In the fourth Ti site, Ti is bonded to four O atoms to form corner-sharing TiO4 tetrahedra. There are a spread of Ti–O bond distances ranging from 1.82–1.84 Å. There are eight inequivalent O sites. In the first O site, O is bonded in a bent 150 degrees geometry to two Ti atoms. In the second O site, O is bonded in a bent 150 degrees geometry to two Ti atoms. In the third O site, O is bonded in a linear geometry to two Ti atoms. In the fourth O site, O is bonded in a bent 150 degrees geometry to two Ti atoms. In the fifth O site, O is bonded in a bent 150 degrees geometry to two Ti atoms. In the sixth O site, O is bonded in a linear geometry to two Ti atoms. In the seventh O site, O is bonded in a bent 150 degrees geometry to two Ti atoms. In the eighth O site, O is bonded in a bent 150 degrees geometry to two Ti atoms.

36 MATERIALS SCIENCE↗

Materials Data on BaTiO3 by Materials Project

BaTiO3 crystallizes in the orthorhombic Amm2 space group. The structure is two-dimensional and consists of one BaO sheet oriented in the (0, 0, 1) direction and one TiO2 sheet oriented in the (0, 0, 1) direction. In the BaO sheet, Ba2+ is bonded in a square co-planar geometry to four equivalent O2- atoms. There are three shorter (2.66 Å) and one longer (2.67 Å) Ba–O bond lengths. O2- is bonded in a square co-planar geometry to four equivalent Ba2+ atoms. In the TiO2 sheet, Ti4+ is bonded in a rectangular see-saw-like geometry to four equivalent O2- atoms. There is two shorter (1.76 Å) and two longer (2.02 Å) Ti–O bond length. O2- is bonded in a linear geometry to two equivalent Ti4+ atoms.

36 MATERIALS SCIENCE↗

Highly-Ordered Titania Nanotube Arrays: Architecture-Property Relationships for Efficient, Wideband Solar-Generation of Hydrogen

Under program auspices we have investigated material chemistries suitable for the solar generation of hydrogen by water photoelectrolysis. We have built upon, and extended, our knowledge base on the synthesis and application of TiO2 nanotube arrays, a material architecture that appears ideal for water photoelectrolysis. To date we have optimized, refined, and greatly extended synthesis techniques suitable for achieving highly ordered TiO2 nanotube arrays of given length, wall thickness, pore diameter, and tube-to-tube spacing for use in water photoelectrolysis. We have built upon this knowledge based to achieve visible light responsive, photocorrosion stable n-type and p-type ternary oxide nanotube arrays for use in photoelectrochemical diodes.

14 SOLAR ENERGY↗

Rational Design and Nanoscale Integration of Multi-Heterostructures as Highly Efficient Photocatalysts

The central goal of this project is to design and synthesize complex multi-hetero-nanostructures and fundamental investigation of their potential as efficient and robust photocatalysts. Specifically, the project aims to develop a nanoscale light-harvesting antenna that can efficiently convert solar photon energy into excited electrons and holes, and integrate such antenna with efficient redox nanocatalysts that can harness the photo-generated carriers for productive electrochemical processes. Focusing on this central goal, we have investigated several potential light-harvesting antennas including: silicon nanowires, nitrogen-doped TiO2 nanowires and the emerging perovskite materials. We also devoted considerable effort in developing electrocatalysts including: hydrogen evolution reaction (HER) catalysts, oxygen evolution reaction (OER) catalysts and oxygen reduction reaction catalysts (ORR). In previous annual reports, we have described our effort in the synthesis and photoelectrochemical properties of silicon, TiO2, perovskite-based materials and heterostructures. Here, we focus our discussion on the recent effort in investigating charge transport dynamics in organolead halide perovskites, as well as carbon nanostructure and platinum nanostructure-based electrocatalysts for energy conversion and storage.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nucleation and Crystal Growth in the Formation of Hierarchical Three-Dimensional Nanoarchitecture

This project is to obtain fundamental understandings of the operation of the Ostwald-Lussac (OL) Law and the oriented attachment (OA) mechanism in nucleation and growth of TiO2 nanorods (NR) via surface-reaction-limited pulsed chemical vapor deposition (SPCVD) process. Three-dimensional (3D) NW networks are a unique type of mesoporous architecture that offers extraordinary surface area density and superior transport properties of electrons, photons, and phonons. It is exceptionally promising for advancing the design and application of functional materials for photovoltaic devices, catalysts beds, hydrogen storage systems, sensors, and battery electrodes. Our group has developed the SPCVD technique by mimicking the mechanism of atomic layer deposition (ALD), which effectively decoupled the crystal growth from precursor concentration while retaining anisotropic 1D growth. For the first time, this technique realized a 3D NW architecture with ultrahigh density and achieved ~4-5 times enhancement on photo-conversion efficiency. Through the support of our current DOE award, we revealed the governing role of the OL Law in the nucleation stage of SPCVD. The formation of NR morphology in SPCVD was identified following the OA mechanism. We also discovered a unique vapor-phase Kirkendall effect in the evolution of tubular or core-shell NR structures. These understandings opened many new opportunities in designing 3D NW architectures with improved properties or new functionalities. Specifically, our accomplishments from this project include five aspects: (1) Observation of the Ostwald-Lussac Law in high-temperature ALD. (2) Observation of vapor-solid Kirkendall effect in ZnO-to-TiO2 nanostructure conversion. (3) Development of highly-efficient capillary photoelectrochemical (PEC) solar-fuel generation. (4) Development of efficient and stable electrochemical protections for black silicon PEC electrodes. (5) Development of doped polymers with tunable electrical properties. This project brings a new level of transformative knowledge on nucleation and crystal growth in the SPCVD NR growth processes. Specifically, quantification of the activation energy landscape guided by the OL law will allow us to establish a critical knowledge base of nucleation kinetics for SPCVD synthesis of NR branches on different material surfaces. Studying the OA kinetics will establish a transformative knowledge base to support this new crystal growth mechanism that can be applied to many functional material systems. This research will pave the road toward a capable and versatile synthesis technology for creating 3D hierarchical mesoscale structures.

36 MATERIALS SCIENCE↗

The Catalysis of Uniform Metal Nanoparticles Deposited onto Oxide Supports: The Components of a Catalyst that Control Activity and Selectivity

Model materials consisting of metal nanoparticles loaded onto oxide supports were synthesized, characterized, and investigated in a number of catalytic chemical reactions. By varying the size, shape, and composition of nanoparticle, as well as the material used to support the nanoparticles, it was found that small changes to the catalyst can have enormous changes to the reaction activity and selectivity. Investigation of these carefully synthesized catalysts via in situ characterization, and reaction studies, leads to a deeper understanding of the molecular level parameters that govern catalysis. Through study of the properties of the nanoparticles it was discovered that nanoparticle size and shape have a dominant role in the chemoselective catalysis of furfural over platinum nanoparticles. When vapor phase furfural and hydrogen gas were passed over Pt nanoparticles ranging in size from 1.5 to 7.1 nm, the catalytic selectivity was found to be dominated by the size of the nanoparticle. Large nanoparticles promoted hydrogenation of furfural to furfuryl alcohol, while smaller nanoparticles favored decarbonylation to furan. The same size specific selectivity was found in the hydrogenative reforming (the transformation of hydrocarbons to branched isomers) of C6 hydrocarbons, in which Pt nanoparticle size controls isomerization selectivity. Methylcyclopentane was found to be extremely size dependent at lower temperatures (553 K). It was found that smaller sized nanoparticles favored isomer formation, while larger sizes catalyzed the aromatization reaction more efficiently. n-hexane was found to be much less dependent on particle size, but still showed an increase in isomerization with small particles over larger sized Pt nanoparticles. The composition of PtxRh1-x bimetallic nanoparticles was also studied. These catalysts were characterized under hexane reforming conditions with Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS), in order to find the actual surface atomic composition under real catalytic working conditions. By using AP-XPS and catalytic data in tandem, it was found that an optimum Rh loading occurred when the surface ensemble statistically favored one Rh atom surrounded by Pt atoms. By utilizing different oxide materials for catalytic supports the flow of charge can play a role in the reaction at the surface or interface in a phenomenon known as the strong metal-support interaction (SMSI). When Pt nanoparticles were loaded onto mesoporous supports made of Co3O4, NiO, MnO2, Fe2O3, and CeO2 it was found that their activity for carbon monoxide oxidation was greatly enhanced relative to the support alone or Pt loaded onto inert mesoporous silica. This finding demonstrates that the interface of the metallic Pt nanoparticle and the oxide 2 support is able to produce turnovers that are orders of magnitude higher than the two materials separately. When the same type of experiments were investigated with n-hexane as the reactant and macroporous Al2O3, TiO2, Nb2O5, Ta2O5, and ZrO2 were utilized as supports, it was found that the reaction selectivity was greatly altered depending on the catalytic support material. TiO2, Nb2O5, and Ta2O5 (all of which are strong Lewis acids) were found to be much more selective for isomer production than the standard SiO2 mesoporous silica supported Pt nanoparticle catalyst. Finally, an acidified mesoporous silica material was utilized as the support. This material was synthesized by using AlCl3 to modify the surface of mesoporous silica. This support was found to have no activity for hexane isomerization alone. However, when Pt nanoparticles were supported on the material, the activity and isomer selectivity in hexane reforming was increased several orders of magnitude as compared to the same nanoparticles supported on unmodified mesoporous silica. This dissertation builds on the existing knowledge of known concepts in catalysis science such as structure sensitive reactions, the metal-support interaction, and acid-base chemistry. The results show how small changes in the active sites of a catalyst can create large changes in the catalytic chemistry. This research demonstrates how careful material control, characterization and reaction study can help to elucidate the molecular level components necessary to design efficient catalysts.

Musselwhite, Nathan↗