Search NASA⌕ Search

SEARCH · Search NASA

Results for “Total Number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Modeling evacuation demand during no-notice emergency events: Tour formation behavior

Disastrous events have been drastically increasing – both in frequency and destructive capacity – over the past few years. While advance-notice events have received a great deal of attention in the literature of disaster management, not much attention so far has been given to the no-notice events mainly because of the scarcity of data. As an attempt to address this critical gap, the current study proposes a disaggregate evacuation demand framework to understand evacuees’ travel behavior in case of no-notice emergency events. Here, the proposed framework comprises four main steps of evacuation decision, evacuation planning, tour formation, and activity schedule update. This article is dedicated to the introduction of the framework structure and elaboration on the tour formation step. In this step, we first estimate the total number of intermediate stops, travel time, and distance of the evacuation tours for those who decide to evacuate through a joint modeling structure and then, determine the type of each intermediate stop (if any). It is found that a broad range of factors including evacuees’ demographic profiles, built-environment attributes, and characteristics of the disastrous event plays a significant role in people’s evacuation behavior during no-notice emergency events. The findings of this study can assist responsible agencies in understanding evacuees’ complex behavior, and consequently, in devising effective strategies to alleviate economic damages and casualties resulted by such events.

99 GENERAL AND MISCELLANEOUS↗

The DR6 protein from human herpesvirus-6B induces p53-independent cell cycle arrest in G{sub 2}/M

HHV-6B infection inhibits cell proliferation in G{sub 2}/M, but no protein has so far been recognized to exert this function. Here we identify the protein product of direct repeat 6, DR6, as an inhibitor of G{sub 2}/M cell-cycle progression. Transfection of DR6 reduced the total number of cells compared with mock-transfected cells. Lentiviral transduction of DR6 inhibited host cell DNA synthesis in a p53-independent manner, and this inhibition was DR6 dose-dependent. A deletion of 66 amino acids from the N-terminal part of DR6 prevented efficient nuclear translocation and the ability to inhibit DNA synthesis. DR6-induced accumulation of cells in G{sub 2}/M was accompanied by an enhanced expression of cyclin B1 that accumulated predominantly in the cytoplasm. Pull-down of cyclin B1 brought down pCdk1 with the inactivating phosphorylation at Tyr15. Together, DR6 delays cell cycle with an accumulation of cells in G{sub 2}/M and thus might be involved in HHV-6B-induced cell-cycle arrest. - Highlights: • HHV-6B-encoded DR6 protein inhibits cell proliferation. • DR6 inhibits host cell DNA synthesis independent of p53. • DR6 delays the cell cycle in G{sub 2}/M. • An N-terminal sequence is necessary for DR6 function. • DR6 induces cytoplasmic accumulation of cyclin B1.

60 APPLIED LIFE SCIENCES↗

LCA of local strategies for energy recovery from waste in England, applied to a large municipal flow

An intense waste management (WM) planning activity is currently undergoing in England to build the infrastructure necessary to treat residual wastes, increase recycling levels and the recovery of energy from waste. From the analyses of local WM strategic and planning documents we have identified the emerging of three different energy recovery strategies: established combustion of residual waste; pre-treatment of residual waste and energy recovery from Solid Recovered Fuel in a dedicated plant, usually assumed to be a gasifier; pre-treatment of residual waste and reliance on the market to accept the 'fuel from waste' so produced. Each energy recovery strategy will result in a different solution in terms of the technology selected; moreover, on the basis of the favoured solution, the total number, scale and location of thermal treatment plants built in England will dramatically change. To support the evaluation and comparison of these three WM strategy in terms of global environmental impacts, energy recovery possibilities and performance with respect to changing 'fuel from waste' market conditions, the LCA comparison of eight alternative WM scenarios for a real case study dealing with a large flow of municipal wastes was performed with the modelling tool WRATE. The large flow of waste modelled allowed to formulate and assess realistic alternative WM scenarios and to design infrastructural systems which are likely to correspond to those submitted for approval to the local authorities. The results show that all alternative scenarios contribute to saving abiotic resources and reducing global warming potential. Particularly relevant to the current English debate, the performance of a scenario was shown to depend not from the thermal treatment technology but from a combination of parameters, among which most relevant are the efficiency of energy recovery processes (both electricity and heat) and the calorific value of residual waste and pre-treated material. The contribution and relative importance of recycling and treatment/recovery processes change with the impact category. The lack of reprocessing plants in the area of the case study has shown the relevance of transport distances for recyclate material in reducing the efficiency of a WM system. Highly relevant to the current English WM infrastructural debate, these results for the first time highlight the risk of a significant reduction in the energy that could be recovered by local WM strategies relying only on the market to dispose of the 'fuel from waste' in a non dedicated plant in the case that the SRF had to be sent to landfill for lack of treatment capacity.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Environmental impacts of residual Municipal Solid Waste incineration: A comparison of 110 French incinerators using a life cycle approach

Highlights: • 110 French incinerators are compared with LCA based on plant-specific data. • Environmental impacts vary as a function of plants energy recovery and NO{sub x} emissions. • E.g. climate change impact ranges from −58 to 408 kg CO{sub 2}-eq/tonne of residual MSW. • Implications for LCA of waste management in a decision-making process are detailed. - Abstract: Incineration is the main option for residual Municipal Solid Waste treatment in France. This study compares the environmental performances of 110 French incinerators (i.e. 85% of the total number of plants currently in activity in France) in a Life Cycle Assessment perspective, considering 5 non-toxic impact categories: climate change, photochemical oxidant formation, particulate matter formation, terrestrial acidification and marine eutrophication. Mean, median and lower/upper impact potentials are determined considering the incineration of 1 tonne of French residual Municipal Solid Waste. The results highlight the relatively large variability of the impact potentials as a function of the plant technical performances. In particular, the climate change impact potential of the incineration of 1 tonne of waste ranges from a benefit of −58 kg CO{sub 2}-eq to a relatively large burden of 408 kg CO{sub 2}-eq, with 294 kg CO{sub 2}-eq as the average impact. Two main plant-specific parameters drive the impact potentials regarding the 5 non-toxic impact categories under study: the energy recovery and delivery rate and the NO{sub x} process-specific emissions. The variability of the impact potentials as a function of incinerator characteristics therefore calls for the use of site-specific data when required by the LCA goal and scope definition phase, in particular when the study focuses on a specific incinerator or on a local waste management plan, and when these data are available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An upregulation of CD8{sup +}CD25{sup +}Foxp3{sup +} T cells with suppressive function through interleukin 2 pathway in pulmonary arterial hypertension

Accumulating evidence suggests that abnormal inflammation plays a critical role in the pathogenesis of pulmonary arterial hypertension (PAH). CD8{sup +}CD25{sup +}Foxp3{sup +} T cell is a novel cell subtype, and its role in PAH is not yet investigated. Here, we observed that PAH patients presented a significant upregulation of CD8{sup +}CD25{sup +}Foxp3{sup +} T cells and a downregulation of CD4{sup +}CD25{sup +}Foxp3{sup +} T cells compared to healthy controls. Regardless, the total number of CD25{sup +}Foxp3{sup +} T cells in PAH patients was still smaller than that in healthy controls. Compared to CD8{sup +}CD25{sup -} T cells, CD8{sup +}CD25{sup +} T cells presented higher Foxp3 expression, lower interferon (IFN)-γ expression and higher transforming growth factor (TGF)-β expression, in both healthy and PAH individuals. The CD8{sup +}CD25{sup +} T cells in PAH patients also demonstrated regulatory function by suppressing the proliferation of CD4{sup +}CD25{sup -} and CD8{sup +}CD25{sup -} effector T cells, albeit at lower efficiency than CD4{sup +}CD25{sup +} T cells from PAH patients and healthy volunteers. CD8{sup +}CD25{sup +} T cells from PAH responded to interleukin (IL)−2 supplement by expansion and upregulating Foxp3 expression. In PAH patients, IL-2-treated CD8{sup +}CD25{sup +} T cells were more potent at inhibiting CD4{sup +}CD25{sup -} effector T cell proliferation than IL-2-untreated CD8{sup +}CD25{sup +} T cells. Together, we found an upregulation of CD8{sup +}CD25{sup +}Foxp3{sup +} T cells in PAH patients, and this T cell population presented suppressive activity that could be enhanced by IL-2 treatment.

60 APPLIED LIFE SCIENCES↗

Bayesian-based response expansion and uncertainty quantification using sparse measurement sets

Systems subjected to dynamic loads often require monitoring of their vibrational response, but limitations on the total number and placement of the measurement sensors can hinder the data-collection process. Here, we present an indirect approach to estimate a system’s full-field dynamic response, including all uninstrumented locations, using response measurements from sensors sparsely located on the system. This approach relies on Bayesian inference that utilizes a system model to estimate the full-field response and quantify the uncertainty in these estimates. By casting the estimation problem in the frequency domain, this approach utilizes the modal frequency response functions as a natural, frequency-dependent weighting scheme for the system mode shapes to perform the expansion. This frequency-dependent weighting scheme enables an accurate expansion, even with highly correlated mode shapes that may arise from spatial aliasing due to the limited number of sensors, provided these correlated modes do not have natural frequencies that are closely spaced. Furthermore, the inherent regularization mechanism that arises in this Bayesian-based procedure enables the utilization of the full set of system mode shapes for the expansion, rather than any reduced subset. This approach can produce estimates when considering a single realization of the measured responses, and with some modification, it can also produce estimates for power spectral density matrices measured from many realizations of the responses from statistically stationary random processes. A simply supported beam provides an initial numerical validation, and a cylindrical test article excited by acoustic loads in a reverberation chamber provides experimental validation.

42 ENGINEERING↗

Study of Highly Selective and Efficient Thiol Derivatization using Selenium Reagents by Mass Spectrometry

Biological thiols are critical physiological components and their detection often involves derivatization. This paper reports a systemic mass spectrometry (MS) investigation of the cleavage of Se-N bond by thiol to form a new Se-S bond, the new selenium chemistry for thiol labeling. Our data shows that the reaction is highly selective, rapid, reversible and efficient. For instance, among twenty amino acids, only cysteine was found to be reactive with Se-N containing reagents and the reaction takes place in seconds. By adding dithiothreitol (DTT), the newly formed Se-S bond of peptides/proteins can be reduced back to free thiol. The high selectivity and excellent reversibility of the reaction provide potential of using this chemistry for selective identification of thiol compounds or enriching and purifying thiol peptides/proteins. In addition, the derivatized thiol peptides have interesting dissociation behavior, which is tunable using different selenium reagents. For example, by introducing an adjacent nucleophilic group into the selenium reagent in the case of using ebselen, the reaction product of ebselen with glutathione (GSH) is easy to lose the selenium tag upon collision-induced dissociation (CID), which is useful to "fish out" those peptides containing free cysteine residues by precursor ion scan. By contrast, the selenium tag of N-(phenylseleno) phthalimide reagent can be stable and survive in CID process, which would be of value in pinpointing thiol location using a top-down proteomic approach. Also, the high conversion yield of the reaction allows the counting of total number of thiol in proteins. We believe that ebselen or N-(phenylseleno) phthalimide as tagging thiol-protein reagents will have important applications in both qualitative and quantitative analysis of different thiol-proteins derived from living cells by MS method.

59 BASIC BIOLOGICAL SCIENCES↗

Resolving Severe Elemental Isobaric Interferences with a Combined Atomic and Molecular Ionization Source - Orbitrap Mass Spectrometry Approach: The 87Sr and 87Rb Geochronology Pair

Many fields of basic and applied sciences, including geochronology, astronomy, metabolism, nutrition and forensics rely on the ability of mass spectrometry to make isotope ratio measurements with a high degree of certainty. The inability to resolve difficult isobaric interferences still plagues certain measurements of this type. A combined atomic and molecular (CAM) ionization source has been interfaced to a high-field Orbitrap mass spectrometer in an effort to alleviate severe atomic, isobaric interferences. Specifically, this work examines the geochronological-significant 87Sr and 87Rb isotope pair. The mass difference between 87Sr and 87Rb is ~0.3 mDa, requiring a minimum resolving power (R = m/?m) of ~290,000, a value ~30X higher than available with conventional (sector-field) elemental mass spectrometers. Under ultra-high resolution conditions, Sr isotope ratio accuracy and precision were evaluated using NIST Sr SRM 987, yielding precision values of <0.1% relative standard deviation (RSD) for the major isotopes and a calculated LOD of 2 pg mL-1, equivalent to 120 fg Sr for a 60 µL injection. In addition to manipulating the signal transient length, which controls the Orbitrap resolving power, the total number of ions in the electrostatic trap and the relative ion populations (i.e. the 87Sr/87Rb concentration ratio), were found to be influential towards resolving the isobaric species. Ultimately, the 87Sr and 87Rb isotopes were baseline resolved with a calculated mass resolution of >1.7 M. At equal 87Sr and 87Rb intensities, the 87Sr/86Sr was measured as 0.71294 (an error of 0.37%) with a precision of 0.097 %RSD, clearly reflecting the alleviation of the isobaric interference.

Hoegg, Edward D.↗

Heterogeneous Composition of Oxygen-Evolving Complexes in Crystal Structures of Dark-Adapted Photosystem II

Photosystem II (PSII) is a homodimeric protein complex that catalyzes water oxidation at the oxygen-evolving complex (OEC), a heterocubanoid calcium-tetra-manganese cluster. Here, we analyze the omit electron-density peaks of the OEC’s metal ions in five X-ray free-electron laser PSII structures at a resolution between 2.15 Å and 1.95 Å. The omit peaks can be described by the total number of electrons and approximated by the variance of electron density distribution when the distributions are spherically symmetric. We show that the number of electrons of metal centers are different in the two OECs of PSII dimers, implying that either the oxidation states and/or occupancies of individual metal ions are different in the two monomers. In either case, we find that the two OECs of dark-adapted PSII dimers in crystals are not fully synchronized in the same expected S 1 state. Differences in redox states of the OEC in PSII only partially account for the observation that the electron densities integrate to a smaller number of electrons than expected. Differences between the determined and expected relative electron numbers are much larger than the estimated errors, indicating heterogeneity in the OEC composition. Here, the reported findings suggest that two OECs of dark-adapted PSII crystals are typically not fully synchronized in the S 1 state and likely generate heterogeneity in the crystallographical data of PSII intermediate structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduced Dislocation Introduction in III–V/Si Heterostructures with Glide-Enhancing Compressively Strained Superlattices

The novel use of a GaAs y P 1-y /GaP compressively-strained superlattice (CSS) to provide enhanced control over misfit dislocation (MD) evolution and threading dislocation density (TDD) during GaP/Si metamorphic heteroepitaxy is demonstrated. Here, the insertion of the CSS just after critical thickness, and thus prior to substantial dislocation introduction, is found to yield significantly reduced TDD in relaxed, 500 nm thick, n-type GaP/Si versus comparable control samples. The impact of CSS period count on average TDD and the overall dislocation network morphology was examined, supported by quantitative microstructural characterization, revealing a nearly 20× relative TDD reduction (to 2.4 ± 0.4×10 6 cm -2 ) with a 3-period CSS structure. A similarly low TDD (3.0 ± 0.6×10 6 cm -2 ) is maintained when the resultant n-GaP/Si virtual substrate is used for the growth of a subsequent n-type GaAs 0.75 P 0.25 -terminal GaAs y P 1-y step-graded metamorphic buffer. Although the physical mechanism for TDD reduction provided by these structures is not yet entirely understood, this initial work suggests that enhanced glide dynamics of MDs at or within the CSS placed early in the growth leads to a reduction in the total number of dislocations introduced overall, as opposed to annihilation-based reduction that occurs in conventional strained-layer superlattice dislocation filter approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-Resolved Elemental Composition of Respiratory Particles in Three Healthy Subjects

The chemical composition of respiratory particles is of interest because the viability of any viruses and bacteria in the particles has been shown to depend on this factor. Here, using computer controlled scanning electron microscopy/energy dispersive X-ray spectroscopy (CCSEM/EDX), we analyzed the size-resolved chemical composition of greater than 35,000 individual respiratory particles collected from three healthy human subjects, quantitatively at nanometer-scale spatial resolution. The desiccated particles ranged in size from 0.05 to 4.4 μm, and the mode of the size distribution was approximately 0.1 μm. Particles were heterogeneous in composition, with approximately 42% of them containing a carbon atomic percentage greater than 95% and approximately 53% of them containing a Na + P + K + Cl percentage greater than 5%. Based on the particles’ elemental composition, we classified them into five categories: 48%–56% of the total number were carbonaceous, mostly organic; 40%–50% Na-rich salt; 0.3%–0.5% P-rich salt; 0.1–0.8% K-rich salt; and 1%–2.5% mixed salt. The number ratio of Na-rich salt particles to carbonaceous particles increased with increasing particle size; particles larger than approximately 2 μm were dominated by Na-rich salt. Size-dependent differences in the chemical composition of respiratory particles may have important implications for the efficiency of airborne transmission of respiratory pathogens.

60 APPLIED LIFE SCIENCES↗

Identification of Known and Novel Monomers for Poly(hydroxyurethanes) from Biobased Materials

Sourcing polymers from biobased materials is desirable for a transition to a more sustainable world. However, finding new monomers sourced from biobased molecules requires extensive experimental effort, due to the fact that most biomolecules lack the functional groups or properties needed to serve as a monomer in a particular polymeric system without chemical modification. In this work, we demonstrate a computational screening method to obtain monomers of a non-isocyanate polyurethane (NIPU), polyhydroxyurethane (PHU), from biomolecules. Our method generates candidate monomers from a list of 15 selected biobased starting molecules by performing chemical transformations that are standard to chemical catalysis and organic synthesis on these starting molecules and then screening the results for molecules with moieties that can be used as monomers for a PHU. Product molecules from two generations of reaction, a total number of 20,057, were analyzed automatically to identify molecules that have two or more epoxy or cyclic carbonate functional groups as candidates for further derivatization. These 21 candidate molecules were then subjected to another two generations of reaction, producing a set of 17,913 additional molecules. Further scrutiny of this set for desired functional groups characterizing PHUs and querying against the PubChem database was carried out, and 15 known molecules that are commercially available were identified, with the desirable features that they are predicted to be derived from biobased starting molecules in four or fewer steps. Moreover, molecule space generated from this process was primarily comprised of molecules that were not known to PubChem, indicating the framework also has the ability to generate novel candidate monomers that originate from biobased starting points.

36 MATERIALS SCIENCE↗

Superposition of Fragment Excitations for Excited States of Large Clusters with Application to Helium Clusters

We develop a local excited-state method, based on the configuration interaction singles (CIS) wave function, for large atomic and molecular clusters. This method exploits the properties of absolutely localized molecular orbitals (ALMOs), which strictly limits the total number of excitations, and results in formal scaling with the third power of the system size for computing the full spectrum of ALMO-CIS excited states. Here, the derivation of the equations and design of the algorithm are discussed in detail, with particular emphasis on the computational scaling. Clusters containing ~500 atoms were used in evaluating the scaling, which agrees with the theoretical predictions, and the accuracy of the method is evaluated with respect to standard CIS. Finally, a pioneering application to the size dependence of the helium cluster spectrum is also presented for clusters of 25-231 atoms, the largest of which results in the computation of 2310 excited states per sampled cluster geometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photon Counting Data Analysis: Application of the Maximum Likelihood and Related Methods for the Determination of Lifetimes in Mixtures of Rose Bengal and Rhodamine B

It is often convenient to know the minimum amount of data needed in order to obtain a result of desired accuracy and precision. It is a necessity in the case of subdiffraction-limited microscopies, such as stimulated emission depletion (STED) microscopy, owing to the limited sample volumes and the extreme sensitivity of the samples to photobleaching and photodamage. We present a detailed comparison of probability-based techniques (the maximum likelihood method and methods based on the binomial and the Poisson distributions) with residual minimization-based techniques for retrieving the fluorescence decay parameters for various two-fluorophore mixtures, as a function of the total number of photon counts, in time-correlated, single-photon counting experiments. The probability-based techniques proved to be the most robust (insensitive to initial values) in retrieving the target parameters and, in fact, performed equivalently to 2-3 significant figures. This is to be expected, as we demonstrate that the three methods are fundamentally related. Furthermore, methods based on the Poisson and binomial distributions have the desirable feature of providing a bin-by-bin analysis of a single fluorescence decay trace, which thus permits statistics to be acquired using only the one trace for not only the mean and median values of the fluorescence decay parameters but also for the associated standard deviations. Lastly, these probability-based methods lend themselves well to the analysis of the sparse data sets that are encountered in subdiffraction-limited microscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Multiscale Simulation Study of Influence of Morphology on Ion Transport in Block Copolymeric Ionic Liquids

In this work, we present results of a multiscale simulation study involving coarse-graining and reverse-mapping steps probing at an atomistic resolution the influence of morphology on ion transport in block copolymer polymeric ionic liquids. We provide a detailed description of the multiscale simulation methodology and then describe the results in the context of four microphase-separated morphologies: two lamella systems, a cylinder, and a gyroid morphology. For the framework adopted in this study (in which the total number of ions was maintained fixed), morphology had little influence on the fraction of ions segregating to the interface and the coordination and hopping characteristics of such interfacially present ions. Such results manifested in anion mobilities being insensitive to the morphology once the dimensionality of the morphology was accounted for. Overall, our results are consistent with the hypothesis that the mobility of ions in such microphase-separated morphologies, after accounting for the dimensionality effects, can be roughly correlated to a linear superposition based on the fraction of bulk anions, which possess mobilities unperturbed from their values in the conducting homopolymers, and the interfacial anions, which exhibit much lower mobilities.

36 MATERIALS SCIENCE↗

Star Block Copolymers at Homopolymer Interfaces: Conformation and Compatibilization

Star block copolymers (s-BCPs), comprised of multiple linear diblock copolymers joined at a central point, are shown to segregate to the interface between two immiscible homopolymers that are identical to the blocks of the s-BCPs. The s-BCPs undergo a configurational transition at the interface, with different blocks of copolymers being embedded in their respective homopolymers, thereby bridging the interface and promoting adhesion. A series of 4-arm s-BCPs were synthesized with hydrogenated or deuterated polystyrene (PS/dPS) as the core block and poly(2-vinylpyridine) (P2VP) as the corona block, which was directly placed at the interface between the two homopolymers. Neutron reflectivity (NR) was used to determine the concentration profiles of the PS homopolymer, s-BCP core blocks, and P2VP total segments under equilibrium. The investigation varies the molecular weight (MW) and the total number of s-BCPs at the interface. Self-consistent-field theory (SCFT) was also employed to calculate the concentration profiles of the components at the interface, which were in excellent agreement with experimental results. The NR showed that the interfacial width between the homopolymers increased with the increasing number of s-BCPs at the interface up to a saturation limit. Beyond this limit, additional s-BCPs were released into the corona-miscible phase as unimolecular micelles. For a comparable interlayer thickness of s-BCPs at the interface, lower MW s-BCPs generated a broader interface. SCFT analysis suggested that, at the same packing density, the arms of the low MW s-BCPs align more parallel to the interface, while the arms of high MW s-BCPs adopt a more normal orientation, like their linear BCP counterparts. Furthermore, it was also observed that the core blocks, constrained by the junction points, were oriented more parallel and closer to the interface than the corona blocks. The phase behavior of the polymer blends revealed that s-BCP additives can efficiently reduce the domain size, with the low MW yielding smaller domain sizes due to the greater reduction in the interfacial energy and the high MW arresting phase separation due to their higher binding energy and a jamming of the interfacial assemblies. Asymmetric double cantilever beam (ADCB) tests demonstrated that s-BCPs promoted adhesion more efficiently than their linear BCP counterparts due to stronger binding energy per molecule, suggesting a more efficient compatibilizer for polymer upcycling. In conclusion, the results from these studies provide fundamental insights into the assembly of s-BCPs at homopolymer interfaces, the reduction of domain size, and promotion of adhesion, providing a strategy for the use of s-BCPs as stealth surfactants and universal compatibilizers.

interface↗

Role of Defects in Ion Transport in Block Copolymer Electrolytes

Ion conducting block copolymers can overcome traditional limitations of homopolymer electrolytes by phase separating into nanoarchitectures that can be simultaneously optimized for two or more orthogonal material properties such as high ionic conductivity and mechanical stability. A key challenge in understanding the ion transport properties of these materials is the difficulty of extracting structure-function relationships without having complete knowledge of all nanoscale transport pathways in bulk samples. In this paper, we demonstrate a method for deriving structure-transport relationships for ion conducting block copolymers using thin films and interdigitated electrodes. Well-defined and directly imaged structure in films of poly(styrene)-block-poly(2-vinylpyridine) is controlled using techniques of directed self-assembly then the poly(2-vinylpyridine) is selectively converted into an ion conductor. The ion conductivity is found to be directly proportional to the total number of connected paths between electrodes and the path length. A single defect such as a dislocation anywhere in the path of an ion conducting route disconnects and precludes that pathway from contributing to the conductivity and results in an increase in the dielectric parameter of the film. When all the ion conduction pathways are blocked between electrodes, the conductivity is negligible, 4 orders of magnitude lower compared to a completely connected morphology and the dielectric parameter increases by a factor of 50. Lastly, these results have profound implications for the interpretation, design, and processing of block copolymer electrolytes for applications as ion conducting membranes.

36 MATERIALS SCIENCE↗

The Dependence of Olefin Hydrogenation and Isomerization Rates on Zirconium Metal–Organic Framework Structure

Zirconium metal–organic frameworks (Zr-MOFs) are a structurally diverse and well-defined class of materials studied in heterogeneous catalysis. Previously, we showed that partial dehydration of the Zr 6 O 8 node in NU-1000 results in heterolytic H 2 cleavage over adjacent Lewis acid and base sites, leading to catalytic conversion of 1-butene. In this work, given the ubiquity of the Zr 6 O 8 node as a secondary building unit (SBU) in Zr-MOFs, with many different potential MOF topologies and capping ligands surrounding the cluster, we study the influence of thermal pretreatments and MOF topology (MOF-808, NU-1000, UiO-66, and NU-1000-NDC) on the activity of the Zr 6 O 8 cluster for H 2 activation and 1-butene hydrogenation and isomerization. Diffuse reflectance IR in the presence of H 2 and pyridine shows that both thermal pretreatment and MOF topology affect the Brønsted acidity of protons generated from H 2 activation and their resulting activity for olefin conversion. High isomerization activity of dehydrated NU-1000 is correlated with the formation of μ 3 OH species after H 2 activation. Additionally, catalytic studies show that the geometry of open coordination sites on individual Zr 6 O 8 nodes influences butene hydrogenation. For this reason, MOF-808 gives anomalously low hydrogenation activity, despite its relatively high total number of open coordination sites, as calculated either from its crystal structure or from NH 3 adsorption. Furthermore, these results reiterate the importance of pretreatment in defining MOF catalytic activity and demonstrate that MOF topology, outside of simply affecting node accessibility, influences reactivity at individual nodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗