Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trajectory analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Radiative Effect of Springtime Biomass-Burning Aerosols over Northern Indochina During 7-SEAS Baseline 2013 Campaign

The direct aerosol radiative effects of biomass-burning (BB) aerosols over northern Indochina were estimated by using aerosol properties (physical, chemical, and optical) along with the vertical profile measurements from ground-based measurements with integration of an optical and a radiative transfer model during the Seven South East Asian Studies Biomass-Burning Aerosols Stratocumulus Environment: Lifecycles Interactions Experiment (7-SEASBASELInE) conducted in spring 2013. Cluster analysis of backward trajectories showed the air masses arriving at mountainous background site (Doi Ang Khang; 19.93degN, 99.05degE, 1536 m above mean sea level) in northern Indochina, mainly from near-source inland BB activities and being confined in the planetary boundary layer. The PM(sub10) and black carbon (BC)mass were 87 +/- 28 and 7 +/- 2 micrograms m(exp -3), respectively. The aerosol optical depth (AOD (sub 500) was found to be 0.26--1.13 (0.71 +/- 0.24). Finer (fine mode fraction is approximately or equal to 0.95, angstrom-exponent at 440-870 nm is approximately or equal to 1.77) and significantly absorbing aerosols(single scattering albedo is approximately or equal to 0.89, asymmetry-parameter is approximately or equal to 0.67, and absorption AOD 0.1 at 440 nm) dominated over this region. BB aerosols (water soluble and BC) were the main contributor to the aerosol radiative forcing (ARF), while others (water insoluble, sea salt and mineral dust) were negligible mainly due to their low extinction efficiency. BC contributed only 6 to the surface aerosol mass but its contribution to AOD was 12 (2 times higher). The overall mean ARF was 8.0 and -31.4 W m(exp -2) at top-of-atmosphere (TOA) and at the surface (SFC), respectively. Likely, ARF due to BC was +10.7 and -18.1 W m(exp -2) at TOA and SFC, respectively. BC imposed the heating rate of +1.4 K d(exp -1) within the atmosphere and highlighting its pivotal role in modifying the radiation budget. We propose that to upgrade our knowledge on BB aerosol radiative effects in BB source region, the long-term and extensive field measurements are needed.

aerosol optical properties↗
NASA NTRS2019

Multidisciplinary Optimization of a Turboelectric Tiltwing Urban Air Mobility Aircraft

Urban air taxis, also known as urban air mobility (UAM) vehicles, are anticipated to be an area of significant market growth in the near future. These vehicles are typically vertical take-off and landing (VTOL) designs which are capable of carrying 1 to 30 passengers in an intra-urban environment with flights of less than 50 nautical miles. Development of UAM vehicles and their integration into the airspace will be enabled by advancements in a number of areas including electrified propulsion systems, structures, acoustics, automation, and controls. However, the strong multidisciplinary interactions for these unique vehicles presents a significant new design challenge. This work describes the development of a multidisciplinary analysis and optimization environment which can be used to support the conceptual design of these UAM vehicles, using efficient gradient based optimization with analytic derivatives. The tools included in this multidisciplinary analysis model the aircraft trajectory, vehicle aerodynamics, structures, and electrified propulsion system. The multidisciplinary environment created in this research is unique in that all the physics tools are tightly integrated together, with the trajectory model directly calling the aerodynamics, structures, and propulsion models. This multidisciplinary analysis environment is then demonstrated in the design optimization of a turboelectric tiltwing UAM vehicle concept.

Hendricks, Eric S.↗
NASA NTRSDate not supplied

Trajectory Design for a Spacecraft Capable of Deploying Probes to the Martian Surface en Route to Low Mars Orbit

The presented trajectory design and analysis was performed for the Aeolus spacecraft mission concept. The Aeolus spacecraft consists of an orbiter (i.e., “mothership”) with the goal of transferring from Earth to low Mars orbit via propulsive and/or atmospheric braking (i.e., aerobraking). During various phases of flight from hyperbolic approach of Mars through low Mars Orbit, the Aeolus orbiter will deploy multiple probes which are targeted to land on the Martian surface with the goal of achieving global surface coverage.

Mars hyperbolic approach↗
NASA NTRSDate not supplied

Trajectory Design for a Spacecraft Capable of Deploying Probes to the Martian Surface en Route to Low Mars Orbit

The presented trajectory design and analysis was performed for the Aeolus spacecraft mission concept. The Aeolus spacecraft consists of an orbiter (i.e., “mothership”) with the goal of transferring from Earth to low Mars orbit via propulsive and/or atmospheric braking (i.e., aerobraking). During various phases of flight from hyperbolic approach of Mars through low Mars Orbit, the Aeolus orbiter will deploy multiple probes which are targeted to land on the Martian surface with the goal of achieving global surface coverage.

Mars hyperbolic approach↗
NASA NTRSDate not supplied

OSIRIS-REx Earth Return & Entry: Targeting Strategy and Maneuver Performance

The OSIRIS-REx sample return capsule landed safely in the Utah desert on September 24, 2023. Starting with the departure from asteroid Bennu in May 2021 through the release of the sample capsule and its arrival at the edge of Earth’s atmosphere hours later, this phase of the mission was planned and analyzed thoroughly to optimize the probability of a successful sample return in a large number of nominal and off-nominal scenarios, all while emphasizing spacecraft safety. This paper discusses the spacecraft and sample capsule Earth return and atmospheric entry trajectory design, maneuver analysis, and flight performance, which ultimately helped lead to a successful sample return and initiation of the OSIRIS-APEX extended mission.

Daniel R. Wibben↗
NASA NTRSDate not supplied

Flight Dynamics Analysis of Lunar Fly-By Altitudes and Near Rectilinear Halo Orbit (NRHO) Resonances With Applications to NASA's Artemis Program

As the interest in lunar exploration grows exponentially, many companies and government agencies around the world are looking to establish presence on the lunar surface. With NASA’s Artemis program and Lunar Gateway, NASA seeks to return to the moon and for exploration. To achieve such goals, many orbit regimes and patterns were explored. Due to its minimal station keeping requirements and communications access, a specific set of Halo Orbits known as Near Rectilinear Halo Orbits (NRHO) was selected for use cases in both NASA’s Artemis Program as well as Lunar Gateway. The primary objective of this effort is to perform a flight dynamics analysis, which analyzes trajectories targeting specific lunar fly-by altitudes and NRHO Resonances in the L2 Southern Family.

NASA↗
NASA NTRS2023

Overview of the NASA Spacecraft Trade Modeling System (NSTRDMS), A Rapid Mission Analysis Tool

A rapid mission analysis tool is developed to support the ongoing design of the Lunar Transit trajectory of the Power and Propulsion Element (PPE). A 50-kW class electric propulsion system is envisioned to transit a massive vehicle be-tween a Medium Earth Orbit (MEO) parking orbit and a lunar L2 southern Near Rectilinear Halo Orbit (NRHO). A parameterization is developed by which the Lunar Transit can be analyzed in the context of varying vehicle mass, solar elec-tric propulsion (SEP) configurations, and solar array power output. A rapid and novel mission analysis tool enables a wide array of these trade analyses to be completed without the need for extensive computing resources or time. This tool is shown to be useful in the analysis of a reference trajectory, where changes to the baseline vehicle architecture or off-nominal operational scenarios (such as electric thruster failures) can be rapidly assessed by the mission designer.

Low thrust↗
NASA NTRSDate not supplied

NASA Spacecraft Trade Modeling System (NSTRDMS)

A rapid mission analysis tool is developed to support the ongoing design of the Lunar Transit trajectory of the Power and Propulsion Element (PPE). A 50-kW class electric propulsion system is envisioned to transit a massive vehicle be-tween a Medium Earth Orbit (MEO) parking orbit and a lunar L2 southern Near Rectilinear Halo Orbit (NRHO). A parameterization is developed by which the Lunar Transit can be analyzed in the context of varying vehicle mass, solar elec-tric propulsion (SEP) configurations, and solar array power output. A rapid and novel mission analysis tool enables a wide array of these trade analyses to be completed without the need for extensive computing resources or time. This tool is shown to be useful in the analysis of a reference trajectory, where changes to the baseline vehicle architecture or off-nominal operational scenarios (such as electric thruster failures) can be rapidly assessed by the mission designer.

Low thrust↗
NASA NTRS1969

Advanced mission analysis programs

Computer programs provide preliminary trajectory and guidance information required for feasibility studies in space mission analysis. The advanced mission analysis computer programs include programs for approximate solutions, programs for targeting and output, and programs for Monte Carlo and linear guidance analysis.

Bjorkman, W. S.↗
NASA NTRS2005

Analysis of Chemical, REP, and SEP missions to the Trojan asteroids

Recent studies suggest significant benefits from using 1st and 2nd generation Radioisotope Power Systems (RPS) as a power source for electric propulsion (EP) missions to the outer planets. This study focuses on trajectories to the Trojan asteroids. A high level analysis is performed with chemical trajectories to determine potential canidates for REP trajectory optimization. Extensive analysis of direct trajectories using REP is performed on these candidates. Solar Electric Propulsion (SEP) trajectories are also considered for comparison against REP trajectories.

Trojan asteroids↗
NASA NTRS1989

Analysis of a turning point problem in flight trajectory optimization

The optimal control policy for the aeroglide portion of the minimum fuel, orbital plane change problem for maneuvering entry vehicles is reduced to the solution of a turning point problem for the bank angle control. For this problem a turning point occurs at the minimum altitude of the flight, when the flight path angle equals zero. The turning point separates the bank angle control into two outer solutions that are valid away from the turning point. In a neighborhood of the turning point, where the bank angle changes rapidly, an inner solution is developed and matched with the two outer solutions. An asymptotic analysis of the turning point problem is given, and an analytic example is provided to illustrate the construction of the bank angle control.

Gracey, C.↗
NASA NTRS2001

Development of a Mars Airplane Entry, Descent, and Flight Trajectory

An entry, descent, and flight (EDF) trajectory profile for a Mars airplane mission is defined as consisting of the following elements: ballistic entry of an aeroshell; supersonic deployment of a decelerator parachute; subsonic release of a heat shield; release, unfolding, and orientation of an airplane to flight attitude; and execution of a pull up maneuver to achieve trimmed, horizontal flight. Using the Program to Optimize Simulated Trajectories (POST) a trajectory optimization problem was formulated. Model data representative of a specific Mars airplane configuration, current models of the Mars surface topography and atmosphere, and current estimates of the interplanetary trajectory, were incorporated into the analysis. The goal is to develop an EDF trajectory to maximize the surface-relative altitude of the airplane at the end of a pull up maneuver, while subject to the mission design constraints. The trajectory performance was evaluated for three potential mission sites and was found to be site-sensitive. The trajectory performance, examined for sensitivity to a number of design and constraint variables, was found to be most sensitive to airplane mass, aerodynamic performance characteristics, and the pull up Mach constraint. Based on the results of this sensitivity study, an airplane-drag optimized trajectory was developed that showed a significant performance improvement.

Murray, James E.↗
NASA NTRSDate not supplied

Mission Planning and Trajectory Design of Roundtrip Mars Transfers

NASA’s Exploration Systems Development Mission Directorate has been evaluating architecture concepts that can deliver crew and cargo to Mars vicinity and return the crew safely back to Earth. A series of trade studies and sensitivity analyses are performed to explore the trade space in an effort to inform the decision of the transportation architecture for future human missions to Mars. This paper documents the tools and methods used to perform mission scans for systems that use high-thrust propulsion and provides discussion on some interesting challenges for the roundtrip transportation architecture. Results for the reference trajectories from the current analysis cycle are presented.

Mars↗
NASA NTRS2010

Computational Aeroelastic Analysis of the Ares Launch Vehicle During Ascent

This paper presents the static and dynamic computational aeroelastic (CAE) analyses of the Ares crew launch vehicle (CLV) during atmospheric ascent. The influence of launch vehicle flexibility on the static aerodynamic loading and integrated aerodynamic force and moment coefficients is discussed. The ultimate purpose of this analysis is to assess the aeroelastic stability of the launch vehicle along the ascent trajectory. A comparison of analysis results for several versions of the Ares CLV will be made. Flexible static and dynamic analyses based on rigid computational fluid dynamic (CFD) data are compared with a fully coupled aeroelastic time marching CFD analysis of the launch vehicle.

Bartels, Robert E.↗
NASA NTRSDate not supplied

Co-Optimization of Navigation System Requirements and Trajectory Design Using a Sweeping Gradient Method and Linear Covariance Analysis

We describe the application of a sweeping gradient method for ordinary differential equations with events (SGM) and linear covariance analysis (LinCov) to the co-optimization of navigation system requirement generation and robust trajectory design. SGM is a method for computing the gradient of trajectory analyses defined by performance indices over initial value problems with events with respect to static parameters. LinCov is an analytic technique for predicting stochastic behavior of dynamical systems. By combining SGM and LinCov, it is possible use efficient, off-the-shelf, gradient-based optimizers to solve a combined robust optimal trajectory and navigation system design problem. In this paper, we formulate the required models to apply the combined SGM and LinCov techniques to a Near-Rectilinear Halo Orbit rendezvous approach scenario and show results for several intermediate problems.

Benjamin W L Margolis↗
NASA NTRSDate not supplied

Mission Planning and Trajectory Design of Roundtrip Mars Transfers

NASA’s Exploration Systems Development Mission Directorate has been evaluating architecture concepts that can deliver crew and cargo to Mars vicinity and return the crew safely back to Earth. A series of trade studies and sensitivity analyses are performed to explore the trade space in an effort to inform the decision of the transportation architecture for future human missions to Mars. This paper documents the tools and methods used to perform mission scans for systems that use high-thrust propulsion and provides discussion on some interesting challenges for the roundtrip transportation architecture. Results for the reference trajectories from the current analysis cycle are presented.

Mars↗
NASA NTRSDate not supplied

Generalized Linear Targeting For Cislunar Flight

An important element of Artemis and NASA’s campaign to explore the Moon is the autonomous onboard two-level targeter (TLT) used during all cislunar flight phases. The function of the TLT is to autonomously recompute the burn targets for the upcoming burn (or multiple burns) in response to navigation and vehicle dispersion providing a solution that meets all of the trajectory constraints. Although the TLT has been utilized previously as a ground-based planning tool, and flown onboard during the Artemis I mission, it’s complexity and iterative nature make is difficult to incorporate into and support rapid analyses such as robust optimal trajectory design applications where speed is essential. In this paper, a set of generalized linear targeting algorithms that mimics many of the properties of the TLT is derived. The generalized algorithms can handle single or multiple impulsive maneuvers, with multiple constraints at multiple fixed or variable times. A linear targeting algorithm for finite burn maneuvers is also derived. The generalized linear targeting algorithms are exceptionally fast and easy to implement in Monte Carlo analysis, linear covariance (LinCov) analysis, and robust optimal trajectory design. Several cislunar flight examples are provided.

Linear Covariance Analysis↗