Search NASA⌕ Search

SEARCH · Search NASA

Results for “ULTRAVIOLET SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Modification of molecular transitions in fullerene films under ion impacts

The photoluminescence properties of as-deposited and 90 MeV Si ion irradiated fullerene films are reported. The irradiation of fullerene films leads to some enhancement or quenching in molecular transition intensities (photoluminescence intensities) depending on the ion fluence. These effects are explained in terms of lowering in the energy level symmetry resulting from induced chemical disordering. The structural modifications occurring upon irradiation were investigated using Fourier transform infrared and UV-vis spectroscopies.

36 MATERIALS SCIENCE↗

Ionizing radiation induced degradation of poly (2-methoxy-5-(2'-ethyl-hexyloxy) -1,4-phenylene vinylene) in solution

In this paper we investigate the causes of the chromatic alteration observed in chloroform solutions of poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene) (MEH-PPV) after gamma ray irradiation. Structural and chemical changes were analyzed by gel permeation chromatography, fourier transform infrared spectroscopy, and proton nuclear magnetic resonance techniques and complemented by electronic structure calculations. The results indicate chlorine incorporation in the polymer structure and main chain scission after irradiation. Based on our findings we propose that the main mechanism for the blue-shifts, observed in the UV-Vis absorption spectra of MEH-PPV after irradiation, is the result of a radical attack on the polymer main chain. Gamma rays generate radicals, Cl and CHCl{sub 2} from chloroform radiolysis that attack preferentially the vinyl double bonds of the polymer backbone, breaking the electronic conjugation and eventually the chain. Our results indicate that oxygen does not play a major role in the effect. Electronic spectra simulations were performed based on these assumptions reproducing the UV-Vis experimental results.

36 MATERIALS SCIENCE↗

Microstructure, optical property, and electronic band structure of cuprous oxide thin films

Cuprous oxide (Cu{sub 2}O) thin films were grown via radio frequency sputtering deposition at various temperatures. The dielectric functions and luminescence properties of the Cu{sub 2}O thin films were measured using spectroscopic ellipsometry and photoluminescence, respectively. High-energy peaks were observed in the photoluminescence spectra. Several critical points (CPs) were found using second derivative spectra of the dielectric functions and the standard critical point model. The electronic band structure and the dielectric functions were calculated using density functional theory, and the CP energies were estimated to compare with the experimental data. We identified the high-energy photoluminescence peaks to quasi-direct transitions which arose from the granular structures of the Cu{sub 2}O thin films.

36 MATERIALS SCIENCE↗

Band gap enhancement of glancing angle deposited TiO{sub 2} nanowire array

Vertically oriented TiO{sub 2} nanowire (NW) arrays were fabricated by glancing angle deposition technique. Field emission-scanning electron microscopy shows the formation of two different diameters {approx}80 nm and {approx}40 nm TiO{sub 2} NW for 120 and 460 rpm azimuthal rotation of the substrate. The x-ray diffraction and Raman scattering depicted the presence of rutile and anatase phase TiO{sub 2}. The overall Raman scattering intensity decreased with nanowire diameter. The role of phonon confinement in anatase and rutile peaks has been discussed. The red (7.9 cm{sup -1} of anatase E{sub g}) and blue (7.4 cm{sup -1} of rutile E{sub g}, 7.8 cm{sup -1} of rutile A{sub 1g}) shifts of Raman frequencies were observed. UV-vis absorption measurements show the main band absorption at 3.42 eV, 3.48 eV, and {approx}3.51 eV for thin film and NW prepared at 120 and 460 rpm, respectively. Three fold enhance photon absorption and intense light emission were observed for NW assembly. The photoluminescence emission from the NW assembly revealed blue shift in main band transition due to quantum confinement in NW structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crystal field disorder effects in the optical spectra of Nd{sup 3+} and Yb{sup 3+}-doped calcium lithium niobium gallium garnets laser crystals and ceramics

The optical spectroscopic properties of RE{sup 3+} (Nd, 1 at. % or Yb, 1 to 10 at. %)-doped calcium-lithium-niobium-gallium garnet (CLNGG) single crystals and ceramics in the 10 K-300 K range are analyzed. In these compositionally disordered materials, RE{sup 3+} substitute Ca{sup 2+} in dodecahedral sites and the charge compensation is accomplished by adjusting the proportion of Li{sup +}, Nb{sup 5+}, and Ga{sup 3+} to the doping concentration. The crystals and ceramics show similar optical spectra, with broad and structured (especially at low temperatures) bands whose shape depends on temperature and doping concentration. At 10 K, the Nd{sup 3+4}I{sub 9/2}{yields}{sup 4}F{sub 3/2,5/2} and Yb{sup 3+2}F{sub 7/2}{yields}{sup 2}F{sub 5/2} absorption bands, which show prospect for diode laser pumping, can be decomposed in several lines that can be attributed to centers with large differences in the crystal field. The positions of these components are the same, but the relative intensity depends on the doping concentration and two main centers dominate the spectra. Non-selective excitation evidences broad emission bands, of prospect for short-pulse laser emission, whereas the selective excitation reveals the particular emission spectra of the various centers. The modeling reveals that the nonequivalent centers correspond to RE{sup 3+} ions with different cationic combinations in the nearest octahedral and tetrahedral coordination spheres, and the most abundant two centers have 4Nb and, respectively, 3Nb1Li in the nearest octahedral sphere. At 300 K, the spectral resolution is lost. It is then inferred that the observed optical bands are envelopes of the spectra of various structural centers, whose resolution is determined by the relative contribution of the temperature-dependent homogeneous broadening and the effects of crystal field disordering (multicenter structure, inhomogeneous broadening). The relevance of spectroscopic properties for selection of pumping conditions and of laser design that would enable utilization of the broad optical bands for efficient laser emission and reduced heat generation is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoconductivity of germanium tin alloys grown by molecular beam epitaxy

Photocurrent spectroscopy was used to measure the infrared absorption of germanium-tin alloys grown by molecular beam epitaxy. To study dependence on Sn composition, the photocurrent was measured at 100 K on alloys of Ge{sub 1-x}Sn{sub x} with atomic percentages of Sn up to 9.8%. The optical absorption coefficient was calculated from the photocurrent, and it was found that the absorption edge and extracted bandgap energy decreased with increasing Sn content. For all Ge{sub 1-x}Sn{sub x} samples, a fundamental bandgap below that of bulk Ge was observed, and a bandgap energy as low as 0.624 eV was found for a Sn percentage of 9.8% at 100 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superhydrophobicity on transparent fluorinated ethylene propylene films with nano-protrusion morphology by Ar + O{sub 2} plasma etching: Study of the degradation in hydrophobicity after exposure to the environment

Fluorinated ethylene propylene (FEP) films were made superhydrophobic by Ar + O{sub 2} plasma etching process. Field emission scanning electron microscopy and atomic force microscopy studies of the plasma-treated FEP samples detected the presence of uniformly distributed nano-protrusions exhibiting a low surface roughness necessary for maintaining the transparency of the samples. In fact, optical transmittance measurements showed an improvement in the transparency of FEP samples after plasma treatment. The X-ray photoelectron spectroscopic analysis showed the presence of –CF{sub x}–O–CF{sub x}– (x = 1, 2, or 3) linkages in both untreated and plasma-treated samples which explains the hydrophilic nature (contact angle below 90{sup ∘}) of the untreated sample. Fourier transform infrared spectroscopy showed no changes in the bulk properties of the plasma-treated samples. Moreover, exposure to the environment caused the surfaces to lose their superhydrophobic property in an indefinite amount of time. This has been further studied through a water immersion experiment and explained through the wetting state transition from Cassie state to Wenzel state.

36 MATERIALS SCIENCE↗

Optical and morphological properties of graphene sheets decorated with ZnO nanowires via polyol enhancement

Graphene-ZnO nanocomposites have proven to be very useful materials for photovoltaic and sensor applications. Here, we report a facile, one-step in situ polymerization method for synthesis of graphene sheets randomly decorated with zinc oxide nanowires using ethylene glycol as solvent. We have used hydrothermal treatment for growth of ZnO nanowires. UV-visible spectra peak shifting around 288nm and 307 nm shows the presence of ZnO on graphene structure. Photoluminiscence spectra (PL) in 400nm-500nm region exhibits the luminescence quenching effect. Scanning electron microscopy (SEM) image confirms the growth of ZnO nanowires on graphene sheets.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Design of molecular switches and sensors based on proton transfer - Theory vs. experiment

Substituent and solvent effects on tautomeric equilibria of isomeric phenylazo naphthols and the analogous Schiff bases are calculated by various quantum chemical methods and solvation models. Special emphasis is put on the reliability of the computational procedures used. The results obtained should aid in resolving discrepancies of experimental data resulting from UV/Vis and NMR spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of calcination temperature on phase transformation of HfO{sub 2} nanoparticles

Oxides nanomaterials exhibit unique physical, chemical and structural properties and motivated a big research that focus in the integration of these materials for various optoelectronic device applications. In present work, hafnium oxide (HfO{sub 2}) nanoparticles (NPs) have been synthesized using precipitation method. Hafnium tetrachloride and sodium hydroxide has been used as starting precursors. Prepared oxide material has been characterized by X-Ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR) and UV-Vis spectroscopy. The phase transformation from amorphous to monoclinic is observed with the increase in calcination temperature from 500 °C and 800 °C. In FTIR spectra, the characteristic bands at ν ∼ 758.53 and 509.57 cm{sup −1} reveals the monoclinic phase of prepared HfO{sub 2} NPs. UV-Vis spectroscopy shows an absorption peak at 204 nm and the bandgap calculated is 6.07 eV.

36 MATERIALS SCIENCE↗

X-ray photoelectron spectroscopy analysis for the chemical impact of solvent addition rate on electromagnetic shielding effectiveness of HCl-doped polyaniline nanopowders

An in-depth analysis of the chemical functionality in HCl-doped polyaniline (PANI) nanopowders is discussed through interpretations of x-ray photoelectron spectra. The distinctions between three PANI sample types, produced under varied synthesis conditions, are compared on the basis correlations between newly collected electron spectra for chemical analysis (or also x-ray photoelectron spectroscopy) and electromagnetic (EM) shielding effectiveness (SE) within two frequency bands (100–1500 MHz and ∼2–14 GHz). The findings are discussed with reference to previous data analysis of electrical conductivities and Raman and UV-vis spectra analyzed from replicates of the same PANI nanopowders, where only the 8–12 GHz range for SE was tested. They further corroborate previous results for limited-solvent conditions that enhance EM shielding. The three nanopowder types show distinctive differences in polaron, bipolaron, and polar lattice contributions. The collective findings describe the chemical connections between controlling and, most importantly, limiting the available solvent for polymerization with simultaneously doping and how it is that the newly developed solvent-limited approach for HCl-PANI nanopowders provides better shielding than traditionally solvent-rich methods by having more extended and perhaps even faster polaron delocalization than other PANI-based products. The maximum oxidation (50%) and doping (49%) levels obtained in the solvent-free nanopowders also produced the highest SE values of 37.3 ± 3.7 dB (MHz band) and 68.6 ± 4.6 dB (GHz band)

36 MATERIALS SCIENCE↗

Lasing in the UV, IR and visible spectral ranges in a runaway-electron-preionised diffuse dischrage

Lasers on the mixtures of inert gases, H{sub 2}, D{sub 2}, and nitrogen with NF{sub 3} and (or) SF{sub 6} are studied under pumping by the volume (diffusive) discharge formed in a nonuniform electric field due to runaway-electron preionisation. Generation in the IR, visible and UV spectral ranges is obtained on atomic transitions of neon ({lambda} = 585.3 nm), argon (750.3 nm) and fluorine (712.8 and 731.1 nm), and on molecular transitions of N2 (337.1 nm), XeF * (351 and 353 nm), HF (2.8 - 3.2 {mu}m) and DF (3.8 - 4.2 {mu}m). It is shown that in N{sub 2} - SF{sub 6}, H{sub 2} - SF{sub 6} and D{sub 2} - SF{sub 6} mixtures the generation efficiency approaches the limiting values. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optical properties of human colon tissues in the 350 – 2500 nm spectral range

We present the optical characteristics of the mucosa and submucosa of human colon tissue. The experiments are performed in vitro using a LAMBDA 950 spectrophotometer in the 350 – 2500 nm spectral range. The absorption and scattering coefficients and the scattering anisotropy factor are calculated based on the measured diffuse reflectance and total and collimated transmittance spectra using the inverse Monte Carlo method. (laser biophotonics)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of gold films and the Casimir force

Precise optical properties of metals are very important for accurate prediction of the Casimir force acting between two metallic plates. Therefore we measured ellipsometrically the optical responses of Au films in a wide range of wavelengths from 0.14 to 33 {mu}m. The films at various thicknesses were deposited at different conditions on silicon or mica substrates. Considerable variation of the frequency dependent dielectric function from sample to sample was found. Detailed analysis of the dielectric functions was performed to check the Kramers-Kronig consistency, and extract the Drude parameters of the films. It was found that the plasma frequency varies in the range from 6.8 to 8.4 eV. It is suggested that this variation is related with the film density. X-ray reflectivity measurements support qualitatively this conclusion. The Casimir force is evaluated for the dielectric functions corresponding to our samples, and for that typically used in the precise prediction of the force. The force for our films was found to be 5%-14% smaller at a distance of 100 nm between the plates. Noise in the optical data is responsible for the force variation within 1%. It is concluded that prediction of the Casimir force between metals with a precision better than 10% must be based on the material optical response measured from visible to mid-infrared range.

36 MATERIALS SCIENCE↗

Two multi-dimensional frameworks constructed from zinc coordination polymers with pyridine carboxylic acids

Two novel zinc coordination polymers [Zn{sub 2}(H{sub 2}O)L(MoO{sub 4})]{sub n} (1) and [Zn{sub 4}(PO{sub 4}){sub 2}L'(H{sub 2}O)]{sub n} (2) (H{sub 2}L=2,2'-bipyridine-6.6'-dicarboxylic acid, H{sub 2}L'=2,2'-bipyridine-4,4'-dicarboxylic acid) have been hydrothermally synthesized and characterized by elemental analyses, IR spectra, UV spectra, single-crystal X-ray diffraction and thermogravimetric analyses. Structural analyses indicate that 1 represents a 2-D sheet structure built by dimeric [Zn{sub 2}L(H{sub 2}O)]{sup 2+} units and MoO{sub 4}{sup 2-} groups whereas 2 displays an interesting 3-D framework constructed by tetranuclear zinc clusters, L'{sup 2-} ligands and PO{sub 4}{sup 3-} groups. Examination of UV spectra suggests that both 1 and 2 can stably exist in the pH range of 2.45-5.45 and 3.01-8.55 in aqueous solution, respectively. The room-temperature solid-state photoluminescence of 1 and 2 are derived from the intra-ligands {pi}-{pi}* transitions of H{sub 2}L and H{sub 2}L' ligands and the ligand-to-metal-charge-transfer transitions. - Graphical Abstract: Two new transition metal coordination polymers, namely, [Zn{sub 2}(H{sub 2}O)L{sub 1}(MoO{sub 4})]{sub n} (1), [Zn{sub 4}(PO{sub 4}){sub 2}L{sub 2}(H{sub 2}O)]{sub n} (2) (H{sub 2}L{sub 1}=2,2'-bipyridine-6,6'-dicarboxylic acid, H{sub 2}L{sub 2}=2,2'-bipyridine-4,4'-dicarboxylic acid) have been hydrothermally synthesized. 1 represents a 2-D sheet structure while 2 represents 3-D network. Highlights: {yields}Two new transition metal coordination polymers have been hydrothermally synthesized. > The two compounds have been characterized by elemental analyses, IR, UV spectra, single-crystal X-ray diffraction, thermogravimetric analyses and photoluminescence. > Compound 1 represents a 2-D sheet structure while 2 represents 3-D network.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reassignment of the Iron (3) Absorption Bands in the Spectra of Mars

Absorption features in the near-infrared and visible region reflectance spectra of Mars have been assigned to specific Fe (3+) crystal-field and o(2-) yields Fe(3+) charge transfer transitions. Recently, near-ultraviolet absorption spectra of iron oxides were obtained and the energies of o(2-) yields Fe(3+) charge-transfer (LMCT) transitions were determined from accurate SCF-X # alpha-SW molecular orbital calculations on (FeO6)(9-) and (FeO4)(5-) clusters. Both the theoretical and experimental results, together with existing data in the literature, show that some of the previous Fe(3+) band assignments in the spectra of Mars need to be revised. The theory of Fe(3+) spectra in minerals is discussed and applied to the spectrum of Mars.

Sherman, D. M.↗

Synthesis and anion exchange properties of a Zn/Ni double hydroxide salt with a guarinoite structure

In this study, the first route to synthesize a compound with the guarinoite structure (Zn,Co,Ni){sub 6}(SO{sub 4})(OH,Cl){sub 10}.5H{sub 2}O is reported. Zn/Ni guarinoite is obtained from the reaction of NiSO{sub 4}.7H{sub 2}O with solid ZnO in aqueous solution. The resulting green Zn/Ni guarinoite ((Zn{sub 3.52}Ni{sub 1.63})(SO{sub 4}){sub 1.33}(OH{sub 7.64}).4.67H{sub 2}O) was characterized by X-ray diffraction, infrared spectrometry, UV-Visible spectrometry and thermal analysis. It is shown that its structure is similar to the one described for the layered Zn sulfate hydroxide hydrate, i.e. brucite layers with 1/4 empty octahedra presenting tetrahedrally coordinated divalent atoms above and below the empty octahedra. Ni atoms are located in the octahedra and zinc atoms in tetrahedra and octahedra. In this structure the exchangeable anions are located at the apex of tetrahedra. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations show that the Zn/Ni guarinoite is composed of aggregates of hexagonal plates of several hundreds of nanometers. Due to its interest for industrial or environmental applications, the exchange of sulfate groups by carbonates has been investigated. Results show a limited exchange and a higher affinity of the Zn/Ni guarinoite for sulfates compared to carbonates. - Graphical abstract: SEM micrograph (secondary electrons) of the synthesized Zn/Ni guarinoite showing that aggregates are composed of small plate-like particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual nutraceutical nanohybrids of folic acid and calcium containing layered double hydroxides

Dual nutraceutical nanohybrids consisting of organic nutrient, folic acid (FA), and mineral nutrient, calcium, were prepared based on layered double hydroxide (LDH) structure. Among various hybridization methods such as coprecipitation, ion exchange, solid phase reaction and exfoliation-reassembly, it was found that exfoliation-reassembly was the most effective in terms of intercalation of FA moiety between Ca-containing LDH layers. X-ray diffraction patterns and infrared spectra indicated that FA molecules were well stabilized in the interlayer space of LDHs through electrostatic interaction. From the atomic force and scanning electron microscopic studies, particle thickness of LDH was determined to be varied with tens, a few and again tens of nanometers in pristine, exfoliated and reassembled state, respectively, while preserving particle diameter. The result confirmed layer-by-layer hybrid structure of FA and LDHs was obtained by exfoliation-reassembly. Solid UV–vis spectra showed 2-dimensional molecular arrangement of FA moiety in hybrid, exhibiting slight red shift in n→π* and π→π* transition. The chemical formulae of FA intercalated Ca-containing LDH were determined to Ca{sub 1.30}Al(OH){sub 4.6}FA{sub 0.74}·3.33H{sub 2}O and Ca{sub 1.53}Fe(OH){sub 5.06}FA{sub 2.24}·9.94H{sub 2}O by inductively coupled plasma-atomic emission spectroscopy, high performance liquid chromatography and thermogravimetry, showing high nutraceutical content of FA and Ca. - Highlights: • We successfully intercalated FA molecules into Ca-containing LDHs. • Exfoliation-reassembly was proven to be the most effective. • The interaction between LDH and FA were studied by FT-IR and UV–vis spectra. • Thermal stability of FA were enhanced by electrostatic interaction with LDH layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗