Search NASA⌕ Search

SEARCH · Search NASA

Results for “Workflows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Atom probe tomography analysis of the reference Zircon GJ-1: An interlaboratory study

In recent years, atom probe tomography (APT) has been increasingly used to study minerals, and in particular the mineral zircon. Zircon (ZrSiO 4 ) is ideally suited for geochronology by utilising the U-Th-Pb isotope systems, and trace element compositions are also widely used to constrain petrogenetic processes. However, while standard geoanalytical techniques provide information at micron scale lengths, the unique combination of chemical/isotopic sensitivity and spatial resolution of APT allows compositional and textural measurements at the nanoscale. This round robin study aims to define the reproducibility of APT data across research facilities and assess the role of different aspects of the atom probe workflow on reproducibility. This is essential to allow correct evaluation of APT results and full utilization of this emerging technique within the geoscience community. In this study, nine samples from the same homogemeous, GJ-1/87 zircon reference grain were sent to nine APT institutes in Europe, USA, Canada and Australia. Each institute conducted three different rounds of APT analyses: using (i) unconstrained analysis parameters, [1] pre-defined analysis parameters, and (iii) a data analysis exercise. Data such as the measured composition, acquisition parameters, or mass spectrum peak identifications, were recorded and analyzed. We observe a significant variation in the measured composition across this round robin study as well as the number of trace elements identified. These differences are thought to directly result from the user's choice of peak identification, ranging and background correction model. The type of instrument does not seem to be a critical factor. Consequently, comparison of absolute trace element data on zircon using APT between laboratories is only valid if the same workflow has been ensured.

round robin, atom probe tomography, reference zirc↗
DOE OSTI2023

The use of gas chromatography – high resolution mass spectrometry for suspect screening and non-targeted analysis of per- and polyfluoroalkyl substances

This study is a workflow development for the analysis, identification, and categorization of per- and polyfluoroalkyl substances (PFAS) using gas chromatography-high resolution mass spectrometry (GC-HRMS) with non-targeted analysis (NTA) and suspect screening techniques. The behavior of various PFAS in a GC-HRMS was studied with regards to retention indices, ionization susceptibility, fragmentation patterns, etc. A custom PFAS database was constructed from 141 diverse PFAS. The database contains mass spectra from electron ionization (EI) mode, as well as MS and MS/MS spectra from positive and negative chemical ionization (PCI and NCI, respectively) modes. Common fragments of PFAS were identified across a diverse set of 141 PFAS analyzed. A workflow for suspect screening of PFAS and partially fluorinated products of incomplete combustion/destruction (PICs/PIDs) was developed which utilized both the custom PFAS database and external databases. PFAS and other fluorinated compounds were identified in both a challenge sample (designed to test the identification workflow) and incineration samples suspected to contain PFAS and fluorinated PICs/PIDs. The challenge sample resulted in a 100% true positive rate (TPR) for PFAS which were present in the custom PFAS database. In conclusion, several fluorinated species were tentatively identified in the incineration samples using the developed workflow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Full spectrum optical constant interface to the Materials Project

Optical constants characterize the interaction of materials with light and are important properties in material design. Here we present a Python-based Corvus workflow for simulations of full spectrum optical constants from the visible and ultraviolet to hard x-ray wavelengths based on the real-space Green’s function code FEFF10 and structural data from the Materials Project (MP). The Corvus workflow manager and its associated tools provide an interface to FEFF10 and the MP database. The workflow parallelizes the FEFF computations of optical constants over all absorption edges for each material in the MP database specified by a unique MP-ID. The workflow tools determine the distribution of computational resources needed for that case. Similarly, the optical constants for selected sets of materials can be computed in a single-shot. Additionally, to illustrate the approach, we present results for several elemental solids in the periodic table, as well as a sample compound, and compare our predictions with experimental results. In addition, we provide a database of calculated results for all elements for which there is a stable elemental solid at standard conditions available in the Materials Project database. As in x-ray absorption spectra, these results are interpreted in terms of an atomic-like background and fine-structure contributions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Genarris 2.0: A Random Structure Generator for Molecular Crystals

Genarris is an open source Python package for generating random molecular crystal structures with physical constraints for seeding crystal structure prediction algorithms and training machine learning models. Here we present a new version of the code, containing several major improvements. A MPI-based parallelization scheme has been implemented, which facilitates the seamless sequential execution of user-defined workflows. A new method for estimating the unit cell volume based on the single molecule structure has been developed using a machine-learned model trained on experimental structures. A new algorithm has been implemented for generating crystal structures with molecules occupying special Wyckoff positions. A new hierarchical structure check procedure has been developed to detect unphysical close contacts efficiently and accurately. New intermolecular distance settings have been implemented for strong hydrogen bonds. To demonstrate these new features, we study two specific cases: benzene and glycine. Genarris finds the experimental structures of the two polymorphs of benzene and the three polymorphs of glycine. Program summary Program Title: Genarris 2.0 Program Files doi: http://dx.doi.org/10.17632/grx6mz4pjn.1 Licensing provisions: BSD-3 Clause Programming language: Python, C External routines/libraries: Spglib, ASE, pymatgen, SciPy, mpi4py, scikit-learn, PyTorch, FHI-aims. Nature of problem: Molecular crystal structure prediction. Solution method: Genarris 2.0 generates molecular crystal structures over the 230 space groups, on general and special Wyckoff positions, using physical constraints. Down-sampling of the generated structures may be performed subsequently, based on molecular crystal packing descriptors and an unsupervised machine learning algorithm. Lastly, ab initio structure relaxation may be performed for the final pool. Depending on the user-defined workflow implemented, Genarris may be used to generate diverse molecular crystal datasets to seed evolutionary algorithms or to train machine learning algorithms or as a standalone crystal structure prediction method. Restrictions: For crystal structure generation, the molecule of interest must be semi-rigid with no bond rotational degrees of freedom. Unusual features: Genarris 2.0 is a highly distributed program, making use of MPI for Python parallelization. The user has the ability to design and implement workflows by executing a user-defined list of procedures. Genarris 2.0 offers new features including a machine learning model for estimating the molecular volume in the solid state from the single molecule structure, structure generation in special Wyckoff positions of space groups, hierarchical structure checks including rigorous treatment of non-orthogonal structures, and clustering and down-selection workflows combining first principles simulations with machine learning. (C) 2020 Elsevier B.V. All rights reserved.

Crystal structure prediction↗
DOE OSTI2022

Field validation of data-driven BSDF and peak extraction models for light-scattering fabric shades

Shading and daylighting systems affect cooling, heating, and lighting energy use by modulating solar radiation through the building façade. Characterizing shading systems holistically and accurately helps designers and engineers evaluate shading systems to achieve energy and non-energy performance goals. These complex fenestration systems can be modeled using Bidirectional Scattering Distribution Functions (BSDF), which map incident radiation to hemispherical distributions of outgoing radiation. Data-driven, tabulated BSDFs are derived from interpolated goniophotometer measured data, then sampled during the raytracing calculation. A peak extraction (PE) algorithm was developed to circumvent limits in BSDF angular resolution, where the specular peak is extracted during simulation by evaluating the BSDF in the through direction and surrounding region. The objective of this study was to validate this measurement and modeling workflow using field monitored data from a full scale testbed with eleven installed fabrics of different weaves, openness factors, and colors and assess the accuracy of the workflow under different adaptation and contrast conditions. Test conditions were limited to clear sky conditions with the sun in the field of view. Results showed that, for tensor tree datasets, vertical illuminance, solar luminance (2.5° apex), and daylight glare probability (DGP) were predicted to within a mean bias error (MBE) error of -456 lx (-12.3%), -3.46e5 (-38.4%), and -0.042 (-7.8%) when full PE occurred. With a binary classification of glare/ no glare, DGP was predicted accurately with a true positive rate of 0.98 and true negative rate of 1.0 using tensor tree data and less accurately with Klems BSDF data, particularly for cases of no glare. The workflow may be of insufficient accuracy to distinguish borderline performance between fabrics using the four-point glare scale, particularly under low adaptation, high contrast daylit conditions. Errors were due to reductions in peak shape and intensity across the BSDF interpolation and data reduction workflow. Future work is needed to better preserve measurement fidelity during interpolation and sampling, which in turn will improve PE performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Toward a smart data transfer node

Scientific computing systems are becoming significantly more complex, with distributed teams and complex workflows spanning resources from telescopes and light sources to fast networks and Internet of Things sensor systems. In such settings, no single, centralized administrative team and software stack can coordinate and manage all resources used by a single application. Indeed, we have reached a critical limit in manageability using current human-in-the-loop techniques. We therefore argue that resources must begin to respond automatically, adapting and tuning their behavior in response to observed properties of scientific workflows. Over time, machine learning methods can be used to identify effective strategies for autonomic, goal-driven management behaviors that can be applied end-to-end across the scientific computing landscape. Using the data transfer nodes that are widely deployed in modern research networks as an example, we explore the architecture, methods, and algorithms needed for a smart data transfer node to support future scientific computing systems that self-tune and self-manage.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Surrogate models for development of unconventional shale reservoirs by an integrated numerical approach of hydraulic fracturing, flow and geomechanics, and machine learning

We develop well-completion surrogate models by taking an integrated workflow of hydraulic fracturing, flow, geomechanics, and machine learning simulation. There are three steps in the proposed workflow. First, history-matching processes are conducted with the field data including pumping and production data for characterization. Second, full-physics simulation is performed with various parameters of the field development (e.g., cluster spacing, clusters per stage, pumping rates and times, amount of proppant, and well spacing) to generate multiple simulation results by changing the parameters of the completion design with well-known hydraulic fracturing, reservoir, geomechanics simulators to calculate fracture geometry, reservoir depressurization, induced stress changes. The workflow is demonstrated over a field in the Southern Midland Basin. Here, we take two completion scenarios: a single well case followed by a multi-well case. Finally, a Long Short-Term Memory (LSTM) machine learning algorithm is employed to create surrogate models that can replicate the full-physics simulation results. Furthermore, results show that the trained models applied in the single well and multi-well cases for a particular geological system can provide good accuracy close to those provided by full-physics simulations. Specifically, the site-specific surrogate models can predict fracture parameters (length, height, and surface area) and cumulative production accurately with computational efficiency, suggesting our proposed workflow can be used as a pragmatic tool for expediting the well completion optimization process.

Geomechanics↗
DOE OSTI2020

Visualization of hydraulic fracture using physics-informed clustering to process ultrasonic shear waves

Ultrasonic transmission is sensitive to the spatial variation in mechanical properties of materials due to the presence of cracks/fractures. Wave propagation through fractured media introduces changes in the frequency content, travel time and transmission coefficient of the wave. A workflow based on physics-informed unsupervised learning is developed to process the transmitted ultrasonic-shear waveforms to non-invasively visualize the geomechanical alterations due to hydraulic fracturing. Novelty of the work involves the assignment of both statistically consistent and physically consistent clusters to the measurements of shear waveforms acquired across the one axial and two frontal planes. Physically consistent/relevant information is incorporated by considering the travel time of the peak of spectral energy and transmission coefficient of the transmitted waveform. The proposed workflow generates maps of geomechanical alterations across the frontal and axial planes of the sample. The outputs of the workflow are in good agreement with independent techniques viz. acoustic emission and X-ray computed tomography. Finally, the proposed workflow can be adapted for improved fracture characterization in the subsurface when processing sonic-logging, cross-wellbore seismic or surface seismic waveform data.

42 ENGINEERING↗
DOE OSTI2023

Comparing Top-Down Proteoform Identification: Deconvolution, PrSM Overlap, and PTM Detection

Generating top-down tandem mass spectra (MS/MS) for complex mixtures of proteoforms has become possible through improvements in fractionation, on-line separation, dissociation, and mass analysis. The algorithms to match tandem mass spectra to sequences have undergone a parallel evolution, with both spectral alignment and peak matching being paired with diverse methods for scoring proteoform-spectral matches (PrSMs). This study assesses state-of-the-art algorithms for top-down identification through three distinct challenges. The first is identifying a large yield of PrSMs while controlling false discovery rate (FDR) in identifying thousands of proteoforms from complex cell lysates via four software workflows: ProSight Proteome Discoverer, TopPIC, Informed Proteomics, and pTop. The second is the deconvolution of data from both Thermo Orbitrap-class and Bruker maXis Q-TOF instruments to produce consistent precursor charge and mass determinations while generating fragment mass lists to optimize identification. The third attempts to detect diverse post-translational modifications (PTMs) in proteoforms from cow milk and human ovarian tissue. The data demonstrate that existing software suites produce admirable sensitivity, in some cases identifying a third of collected tandem mass spectra with FDR controlled below 2%; the overlap in these PrSMs, however, illustrates real value in searching data with multiple search engines. Differences among identification workflows seem to result from each search algorithm incorporating its own deconvolution algorithm. By transmitting deconvolution data from multiple deconvolution routes (Thermo Xtract, Bruker Auto MSn, Mascot Distiller, TopFD, and FLASHDeconv) to the downstream TopPIC search algorithm, we were able to detect common causes of deconvolution disagreement. The detection of PTMs was very inconsistent among search algorithms, with some workflows suggesting as little as 1% of PrSMs from cow’s milk were singly-phosphorylated while other workflows found that 18% of PrSMs were singly-phosphorylated. Taken together, these results make a strong argument for top-down researchers to adopt a standard practice of analyzing each MS/MS experiment with at least two different search engines.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

mzPeak: Designing a Scalable, Interoperable, and Future-Ready Mass Spectrometry Data Format

Advances in mass spectrometry (MS) instrumentation, such as higher resolution, faster scan speeds, and improved sensitivity, have significantly increased the volume and complexity of data. The growing adoption of imaging and ion mobility further amplifies these challenges across MS-based omics fields, including proteomics, metabolomics, and lipidomics. While these technologies unlock new possibilities, they also present significant challenges in data management, storage, and accessibility. Existing open formats, such as the XML-based community standards mzML and imzML, struggle to meet the demands of modern MS workflows due to their large file sizes, slow data access, and limited metadata support. Vendor-specific formats, while optimized for proprietary instruments, lack interoperability, comprehensive metadata support and long-term archival reliability. This white paper lays the groundwork for mzPeak, a next-generation community data format designed to address these challenges and support high-throughput, multi-dimensional MS workflows. By adopting a hybrid model that combines efficient binary storage for numerical data and both human and machine-readable metadata storage, mzPeak will reduce file sizes, accelerate data access, and offer a scalable, adaptable solution for evolving MS technologies. For researchers, mzPeak will enable enhanced interoperability across platforms, seamless support for complex workflows including ion mobility and MS imaging, and faster data access compared to existing community formats such as mzML. Its design will ensure data is managed in compliance with regulatory standards, essential for applications such as precision medicine and chemical safety, where long-term data integrity and accessibility are critical. For vendors, mzPeak provides a streamlined, open alternative to proprietary formats, reducing the burden of regulatory compliance while aligning with the industry's push for transparency and standardization. By offering a high-performance, interoperable solution, mzPeak positions vendors to meet customer demands for sustainable data management tools which will be able to handle emerging and future data types and workflows. mzPeak aspires to become the cornerstone of MS data management, empowering researchers, vendors, and developers to innovate and collaborate more effectively.

data formats↗
DOE OSTI2025

Machine Learning-Assisted Recovery of Delicate Kinetic Information from Transient Reactor Experiments

Identifying active sites and their roles in chemical reaction steps remains a vital challenge in heterogeneous catalysis. Transient experiments offer a unique way to probe active sites and distinguish subtle kinetic features. Although physics-based analysis methods may be well-developed, they can be highly susceptible to experimental noise, and smoothing methods may erase or even distort important features; a smooth curve is not always the best curve. We demonstrate a new workflow for the direct interpretation of intrinsic kinetic information from exit flux curves measured in transient reactor experiments. This workflow contains three artificial neural networks (ANNs), including a noise reducer, a concentration predictor, and a rate predictor to analyze experimental data, followed by the virtual TAP (VTAP) physics-based reactor model and density functional theory (DFT) calculations of adsorption energies on specific sites. We use this workflow to analyze the data from experiments titrating Pt/Al 2 O 3 and Pt/SiO 2 catalysts with carbon monoxide (CO) in the temporal analysis of products (TAP) reactor. Our workflow separates the time-evolving chemical reaction and mass transfer information contained in the TAP pulse response. The existence of strong- and weak-binding sites on the Pt/Al 2 O 3 catalyst is observed in the catalyst titration experiment in the transient reactor. The structures of the strong- and weak-binding sites are then identified by using DFT calculations. We find that the Pt/SiO 2 catalyst has only strong-binding sites, which aligns with the inactive support effect of SiO 2 . We demonstrate how machine learning methods provide unique insights with high-resolution data analysis that cannot be achieved by using state-of-the-art physics-based methods.

Adsorption↗
DOE OSTI2023

Coupling High-Throughput and Targeted Screening for Identification of Nonobvious Metabolic Engineering Targets

Identification of metabolic engineering targets is a fundamental challenge in strain development programs. While high-throughput (HTP) genetic engineering methodologies capable of generating vast diversity are being developed at a rapid rate, a majority of industrially interesting molecules cannot be screened at sufficient throughput to leverage these techniques. We propose a workflow that couples HTP screening of common precursors (e.g., amino acids) that can be screened either directly or by artificial biosensors, with low-throughput targeted validation of the molecule of interest to uncover nonintuitive beneficial metabolic engineering targets and combinations hereof. Using this workflow, we identified several nonobvious novel targets for improving p-coumaric acid (p-CA) and L -DOPA production from two large 4k gRNA libraries each deregulating 1000 metabolic genes in the yeast Saccharomyces cerevisiae. We initially screened yeast cells transformed with gRNA library plasmids for individual regulatory targets improving the production of l-tyrosine-derived betaxanthins, identifying 30 targets that increased intracellular betaxanthin content 3.5–5.7 fold. Hereafter, we screened the targets individually in a high-producing p-CA strain, narrowing down the targets to six that increased the secreted titer by up to 15%. To investigate whether any of the six targets could be additively combined to improve p-CA production further, we created a gRNA multiplexing library and subjected it to our proposed coupled workflow. The combination of regulating PYC1 and NTH2 simultaneously resulted in the highest (threefold) improvement of the betaxanthin content, and an additive trend was also observed in the p-CA strain. Lastly, we tested the initial 30 targets in a L -DOPA producing strain, identifying 10 targets that increased the secreted titer by up to 89%, further validating our screening by proxy workflow. This coupled approach is useful for strain development in the absence of direct HTP screening assays for products of interest.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Challenges of conventional iterative all-atom and coarse-grained multiscale molecular dynamics

In this work, we evaluate the biomolecular dynamics behaviors when conventionally iterating between all-atom (AA) and coarse-grained (CG) molecular dynamics (MD) simulations over multiple cycles. We implemented the workflow to iterate between AA and CG in OpenMM, namely the iterative multiscale MD (iMMD) simulation workflow. In particular, we aim to identify practical applications for iterating between AA and CG simulations in a conventional manner without any constraints or model modifications. We evaluate the iMMD workflow on four representative systems, spanning folding of two soluble proteins and protein-protein as well as protein-lipid interactions of two membrane proteins. We observe that iteration between AA and CG representations could help the soluble proteins exit undesirable metastable states to fold, resulting from random protein structural distortions due to cycling. Consequently, the most reliable use of iterative AA and CG simulations appears to be to accelerating complex lipid mixing for membrane-bound protein systems rather than sampling protein conformational space. Our work explores the practical usages and limitations for iterative AA and CG simulations using readily available AA and CG force fields. The evaluated iMMD workflow in OpenMM is made available at https://github.com/lanl/iMMD.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

The future of self-driving laboratories: from human in the loop interactive AI to gamification

Recent developments in artificial intelligence (AI) and machine learning (ML), implemented through self-driving laboratories (SDLs), are rapidly creating unprecedented opportunities for the accelerated discovery and optimization of materials. This paper provides a joint analysis of SDLs from both academic and industry perspectives, highlighting the importance of integrating human intelligence in these systems. It discusses the necessity of careful planning in SDL design across physical, data, and workflow dimensions, including instrumental setup, experimental workflow, data management, and human–SDL interaction. The significance of integrating human input within SDLs, especially as the focus shifts from individual tools and tasks to the creation and management of complex workflows, is emphasized. The paper stresses on the crucial role of reward function design in developing forward-looking workflows and examines the interplay between hardware evolution, ML application across chemical processes, and the influence of reward systems in research. Ultimately, the article advocates for a future where SDLs blend human intuition in hypothesis formulation with AI's precision, speed, and data-handling capabilities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Producing Madgraph5_aMC@NLO gridpacks and using TensorFlow GPU resources in the CMS HTCondor Global Pool

The CMS experiment has an HTCondor Global Pool, composed of more than 200K CPU cores available for Monte Carlo production and the analysis of da.The submission of user jobs to this pool is handled by either CRAB, the standard workflow management tool used by CMS users to submit analysis jobs requiring event processing of large amounts of data, or by CMS Connect, a service focused on final stage condor-like analysis jobs and applications that already have a workflow job manager in place. The latest scenario canbring cases in which workflows need further adjustments in order to efficiently work in a globally distributed pool of resources. For instance, the generation of matrix elements for high energy physics processes via Madgraph5_aMC@NLO and the usage of tools not (yet) fully supported by the CMS software, such as Ten-sorFlow with GPUsupport, are tasks with particular requirements. A special adaption, either at the pool factory level (advertising GPU resources) or at the execute level (e.g: to handle special parameters that describe certain needs for the remote execute nodes during submission) is needed in order to adequately work in the CMS global pool. This contribution describes the challenges and efforts performed towards adaptingsuch workflows so they can properly profit from the Global Pool via CMS Connect.

Bockelman, Brian Paul↗
DOE OSTI2026

Automated ICRF heating surrogate modeling via machine learning

This work introduces automated machine learning workflows that address critical bottlenecks in surrogate model development for Ion Cyclotron Range of Frequencies (ICRF) heating applications. The automated framework includes data analysis tools that transform raw datasets into actionable insights in seconds, replacing weeks of manual exploratory effort and ensuring consistent, reproducible dataset characterization. By integrating advanced hyperparameter optimization (HPO) methods including Bayesian optimization via BoTorch and Tree-structured Parzen Estimators (TPE), the framework significantly reduces model development time from weeks to hours, decreasing computational cost and required expertise, while enabling high-accuracy surrogate models. Compared to traditional hyperparameter scanning (HPS) techniques such as methodical, randomized, and grid searches, HPO methods achieve superior convergence and predictive performance, even when compared to already well-tuned reference models. On NSTX High Harmonic Fast Wave (HHFW) heating datasets, both Random Forest Regressor (RFR) and neural network surrogates demonstrate improved accuracy, achieving R 2 values beyond 0.97 and 0.98, respectively. The results show that while HPO gains are modest for robust architectures like RFR, they become essential for more sensitive models such as neural networks, highlighting the trade-offs across optimization strategies. Through automated workflows that eliminate manual hyperparameter tuning and require minimal ML expertise, this work enables widespread adoption of high-fidelity surrogate models across the fusion community for real-time plasma control, uncertainty quantification, rapid experimental scenario development, and integrated system optimization.

Sanchez-Villar, Alvaro [Princeton Plasma Physics L↗
DOE OSTI2023

High-throughput ab initio reaction mechanism exploration in the cloud with automated multi-reference validation

Quantum chemical calculations on atomistic systems have evolved into a standard approach to studying molecular matter. These calculations often involve a significant amount of manual input and expertise, although most of this effort could be automated, which would alleviate the need for expertise in software and hardware accessibility. Here, we present the AutoRXN workflow, an automated workflow for exploratory high-throughput electronic structure calculations of molecular systems, in which (i) density functional theory methods are exploited to deliver minimum and transition-state structures and corresponding energies and properties, (ii) coupled cluster calculations are then launched for optimized structures to provide more accurate energy and property estimates, and (iii) multi-reference diagnostics are evaluated to back check the coupled cluster results and subject them to automated multi-configurational calculations for potential multi-configurational cases. All calculations are carried out in a cloud environment and support massive computational campaigns. Key features of all components of the AutoRXN workflow are autonomy, stability, and minimum operator interference. We highlight the AutoRXN workflow with the example of an autonomous reaction mechanism exploration of the mode of action of a homogeneous catalyst for the asymmetric reduction of ketones.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Elevating zero dimensional global scaling predictions to self-consistent theory-based simulations

In this work, we have developed an innovative workflow, Stability, Transport, Equilibrium, and Pedestal (STEP)-zero-dimensional (0D), within the OMFIT integrated modeling framework. Through systematic validation against the International Tokamak Physics Activity global H-mode confinement database, we demonstrated that STEP-0D, on average, predicts the energy confinement time with a mean relative error of less than 19%. Moreover, this workflow showed promising potential in predicting plasmas for proposed fusion reactors such as the affordable, robust, compact (ARC) reactor, the European demonstration power plant (EU-DEMO), and the China fusion engineering test reactor (CFETR) indicating moderate H-factors between 0.9 and 1.2. STEP-0D allows theory-based prediction of tokamak scenarios, beginning with 0D quantities. The workflow initiates with the PRO-create module, generating physically consistent plasma profiles and equilibrium using the same 0D quantities as the IPB98(y,2) confinement scaling. This sets the starting point for the STEP module, which further iterates between theory-based physics models of equilibrium, core transport, and pedestal to yield a self-consistent solution. Given these attributes, STEP-0D not only improves the accuracy of predicting plasma performance but also provides a path toward a novel fusion power plant design workflow. When integrated with engineering and costing models within an optimization, this new approach could eliminate the iterative reconciliation between plasma models of varying fidelity. This potential for a more efficient design process underpins STEP-0D's significant contribution to future fusion power plant development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗