Search NASA⌕ Search

SEARCH · Search NASA

Results for “ab initio phasing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Thermal Conductivity of Metallic Uranium

This project has developed a modeling and simulation approaches to predict the thermal conductivity of metallic fuels and their alloys. We focus on two methods. The first method has been developed by the team at the University of Wisconsin Madison. They developed a practical and general modeling approach for thermal conductivity of metals and metal alloys that integrates ab-initio and semi-empirical physics-based models to maximize the strengths of both techniques. The second method has been developed by the team at Virginia Tech. This approach consists of a determining the thermal conductivity using only ab-initio methods without any fitting parameters. Both methods were complementary. The models incorporated both phonon and electron contributions. Good agreement with experimental data over a wide temperature range were found. The models also provided insight into the different physical factors that govern the thermal conductivity under different temperatures. The models were general enough to incorporate more complex effects like additional alloying species, defects, transmutation products and noble gas bubbles to predict the behavior of complex metallic alloys like U-alloy fuel systems under burnup. 3 Introduction Thermal conductivity is an important thermal physical property affecting the performance and efficiency of metallic fuels. Some experimental measurement of thermal conductivity and its correlation with composition and temperature from empirical fitting are available for U, Zr and their alloys with Pu and other minor actinides. However, as reviewed in by Kim, Cho and Sohn, due to the difficulty in doing experiments on actinide materials, thermal conductivities of metallic fuels have only been measured at limited alloy compositions and temperatures, some of them even being negative and unphysical. Furthermore, the correlations developed so far are empirical in nature and may not be accurate when used for prediction at conditions far from those used in the original fitting. Moreover, as fuels burn up in the reactor and fission products are built up, thermal conductivity is also significantly changed. Unfortunately, fundamental understanding of the effect of fission products is also currently lacking. In this project, we probe thermal conductivity of metallic fuels with ab initio calculations, a theoretical tool with the potential to yield better accuracy and predictive power than empirical fitting. This work will both complement experimental data by determining thermal conductivity in wider composition and temperature ranges than is available experimentally, and also develop mechanistic understanding to guide better design of metallic fuels in the future. So far, we focused on α-U perfect crystal, the ground-state phase of U metal. We focus on two methods. The first method has been developed by the team at the University of Wisconsin Madison. They developed a practical and general modeling approach for thermal conductivity of metals and metal alloys that integrates ab-initio and semi-empirical physics-based models to maximize the strengths of both techniques. The second method has been developed by the team at Virginia Tech. This approach consists of a determining the thermal conductivity using only ab-initio methods without any fitting parameters. Both methods were complementary and very helpful to understand the physics behind the thermal conductivity in metallic uranium and other materials with similar characteristics. In Section I, the combined model developed at UWM is explained. In Section II, the ab-initio method developed at VT is described along with the uranium pseudo-potential and its validation. Section III is devoted to the work done by Jianguo Yu at INL. Finally, we will present the performance of the project in terms of milestones, publications, and presentations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probing charge density wave phases and the Mott transition in 1 T -TaS 2 by inelastic light scattering

We present a polarization-resolved, high-resolution Raman scattering study of the three consecutive charge density wave (CDW) regimes in 1T - TaS 2 single crystals, supported by ab initio calculations. Our analysis of the spectra within the low-temperature commensurate (C-CDW) regime shows P$\bar3$ symmetry of the system, thus excluding the previously proposed triclinic stacking of the “star-of-David” structure, and promoting trigonal or hexagonal stacking instead. The spectra of the high-temperature incommensurate (IC-CDW) phase directly project the phonon density of states due to the breaking of the translational invariance, supplemented by sizable electron-phonon coupling. Between 200 and 352 K, our Raman spectra show contributions from both the IC-CDW and the C-CDW phases, indicating their coexistence in the so-called nearly commensurate (NC-CDW) phase. The temperature dependence of the symmetry-resolved Raman conductivity indicates the stepwise reduction of the density of states in the CDW phases, followed by a Mott transition within the C-CDW phase. We determine the size of the Mott gap to be Ω gap ≈ 170 – 190 meV, and track its temperature dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical Studies of the Extra-terrestrial Chemistry of Biogenic Elements and Compounds

Results are presented on the following:(A) Ab initio quantum chemical studies of reactions in astrophysical ices.Theoretical electronic structure calculations were used to investigate reactions between formaldehyde (H2CO) and both hydrogen cyanide (HCN) and isocyanide (HNC) in search of other favorable reactions such as ammonia-formaldehyde addition, which was found in a recent theoretical study to be strongly enhanced when it occurs within cold ices.The present study examines further reactions between this product and H2CO in ices.(B) Heterogeneous hydrogenation of CO and H2CO on icy grain mantles.Formaldehyde (H2CO) and methanol (CH30H) are thought to be produced in the interstellar medium by the successive hydrogenation of carbon monoxide (CO) on grain surfaces. In the gas phase, the steps in which H adds to CO and H2CO possess modest barriers and are too inefficient to account for the observed abundances. Recent laboratory work has confirmed that formaldehyde and methanol are formed when H atoms are deposited on CO ice at 12 K. The present study employed ab initio quantum chemical calculations to investigate the impact of water ice on the sequential hydrogenation of CO.(C) Ice-bound condensed-phase reactions involving formic acid (HCOOH), methylenimine (CH2NH), hydrogen cyanide (HCN), hydrogen isocyanide (HNC), and ammonia ( 3) were investigated in order to characterize possible pathways to larger organic species that are efficient at the cold temperatures prevalent in cometary nuclei and the interstellar medium. (D) Pathways to glycine and other amino acids in ultraviolet-irradiated ices determined via quantum chemical modeling.(E) Photoionization in ultraviolet processing of astrophysical ice analogs at cryogenic temperatures.

Woon, David E.↗

Direct observation of the collective modes of the charge density wave in the kagome metal CsV 3 Sb 5

A recently discovered group of kagome metals AV 3 Sb 5 (A = K, Rb, Cs) exhibit a variety of intertwined unconventional electronic phases, which emerge from a puzzling charge density wave phase. Understanding of this charge-ordered parent phase is crucial for deciphering the entire phase diagram. However, the mechanism of the charge density wave is still controversial, and its primary source of fluctuations—the collective modes—has not been experimentally observed. Here, we use ultrashort laser pulses to melt the charge order in CsV 3 Sb 5 and record the resulting dynamics using femtosecond angle-resolved photoemission. We resolve the melting time of the charge order and directly observe its amplitude mode, imposing a fundamental limit for the fastest possible lattice rearrangement time. These observations together with ab initio calculations provide clear evidence for a structural rather than electronic mechanism of the charge density wave. Our findings pave the way for a better understanding of the unconventional phases hosted on the kagome lattice.

36 MATERIALS SCIENCE↗

Paramagnetic electronic structure of CrSBr: Comparison between ab initio G W theory and angle-resolved photoemission spectroscopy

Here, we explore the electronic structure of paramagnetic CrSBr by comparative first-principles calculations and angle-resolved photoemission spectroscopy. We theoretically approximate the paramagnetic phase using a supercell hosting spin configurations with broken long-range order and applying quasiparticle self-consistent GW theory, without and with the inclusion of excitonic vertex corrections to the screened Coulomb interaction (QS GW and QS $G\widehat{W}$, respectively). Comparing the quasiparticle band-structure calculations to angle-resolved photoemission data collected at 200 K results in excellent agreement. This allows us to qualitatively explain the significant broadening of some bands as arising from the broken magnetic long-range order and/or electronic dispersion perpendicular to the quasi-two-dimensional layers of the crystal structure. The experimental band gap at 200 K is found to be at least 1.51 eV at 200 K. At lower temperature, no photoemission data can be collected as a result of charging effects, pointing towards a significantly larger gap, which is consistent with the calculated band gap of approximately 2.1 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prediction of exotic magnetic states in the alkali-metal quasi-one-dimensional iron selenide compound Na 2 FeSe 2

The magnetic and electronic phase diagram of a model for the quasi-one-dimensional alkali-metal iron selenide compound Na 2 FeSe 2 is presented. The novelty of this material is that the valence of iron is Fe 2+ , contrary to most other iron-chain compounds with valence Fe 3+ . Using first-principles techniques, we developed a three-orbital tight-binding model that reproduces the ab initio band structure near the Fermi level. Including Hubbard and Hund couplings and studying the model via the density-matrix renormalization group and Lanczos methods, we constructed the ground-state phase diagram. A robust region where the block state ↑↑↓↓↑↑↓↓ is stabilized was unveiled. The analog state in iron ladders, employing 2×2 ferromagnetic blocks, is by now well established, but in chains a block magnetic order has not been observed yet in real materials. The phase diagram also contains a large region of canonical staggered spin order ↑↓↑↓↑↓↑ at very large Hubbard repulsion. At the block-to-staggered transition region, an exotic phase is stabilized with a mixture of both states: an inhomogeneous orbital-selective charge density wave with the exotic spin configuration ↑↑↓↑↓↓↑↓. Our predictions for Na 2 FeSe 2 may guide crystal growers and neutron-scattering experimentalists towards the realization of block states in one-dimensional iron selenide chain materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the Formation of Complex Phases: The Case of FeSi 2

One of the fundamental goals of materials science is to understand and predict the formation of complex phases. In this study, FeSi 2 is considered as an illustration of complex phase formation. Although Fe and Si both crystallize with a simple structure, namely, body-centered cubic (bcc A2) and diamond (A4) structures, respectively, it is rather intriguing to note the existence of two complex structures in the Si-rich part of the phase diagram around FeSi 2 : α-FeSi 2 at high temperatures (HT) with a slight iron-deficient structure and β-FeSi2 (also referred to as Fe 3 Si 7 ) at low temperatures (LT). We re-analyze the geometry of these two phases and rely on approximant phases that make the relationship between these two phases simple. To complete the analysis, we also introduce a surrogate of the C16 phase that is observed in FeGe 2 . We clearly identify the relationship that exists between these three approximant phases, corroborated by a ground-state analysis of the Ising model for describing ordering that takes place between the transition metal element and the “vacancies”. This work is further supported by ab initio electronic structure calculations based on density functional theory in order to investigate properties and transformation paths. Finally, extension to other alloys, including an entire class of alloys, is discussed.

36 MATERIALS SCIENCE↗

A Perspective on Multiscale Modeling of Explicit Solvation-Enabled Simulations of Catalysis at Liquid–Solid Interfaces

Catalysis at liquid-solid interfaces is profoundly influenced by the interfacial solvent structure, which affects catalytic activity, selectivity, and reaction pathways. This perspective discusses state-of-the-art multiscale modeling methods that integrate quantum mechanics and molecular mechanics approaches to apply explicit solvent molecules to capture these interfacial phenomena. Specifically, the construction of multiscale models, the importance of capturing the interfacial solvent structure, and the computational strategies used to achieve this are explored, and the challenges in balancing chemical accuracy with computational expense are highlighted. Additionally, this perspective addresses the limitations of current methods. Opportunities for integrating machine learning are proposed. Here, by advancing the efficiency and user friendliness of multiscale modeling, it is argued that deeper insights into heterogeneous catalysis in liquid phases can be provided, which will ultimately contribute to the development of more efficient catalytic processes.

Ab initio molecular dynamics↗

Spectroscopic and computational studies of matrix-isolated iso-CHBr{sub 3}: Structure, properties, and photochemistry of iso-bromoform

Iso-polyhalomethanes are known reactive intermediates that play a pivotal role in the photochemistry of halomethanes in condensed phases. In this work, iso-bromoform (iso-CHBr{sub 3}) and its deuterated isotopomer were characterized by matrix isolation infrared and UV/visible spectroscopy, supported by ab initio and density functional theory calculations, to further probe the structure, spectroscopy, and photochemistry of this important intermediate. Selected wavelength laser irradiation of CHBr{sub 3} isolated in Ar or Ne matrices at {approx}5 K yielded iso-CHBr{sub 3}; the observed infrared and UV/visible absorptions are in excellent agreement with computational predictions, and the energies of various stationary points on the CHBr{sub 3} potential energy surface were characterized computationally using high-level methods in combination with correlation consistent basis sets. These calculations show that, while the corresponding minima lie {approx}200 kJ/mol above the global CHBr{sub 3} minimum, the isomer is bound by some 60 kJ/mol in the gas phase with respect to the CHBr{sub 2}+ Br asymptote. The photochemistry of iso-CHBr{sub 3} was investigated by selected wavelength laser irradiation into the intense S{sub 0}{yields} S{sub 3} transition, which resulted in back photoisomerization to CHBr{sub 3}. Intrinsic reaction coordinate calculations confirmed the existence of a first-order saddle point connecting the two isomers, which lies energetically below the threshold of the radical channel. Subsequently, natural bond orbital analysis and natural resonance theory were used to characterize the important resonance structures of the isomer and related stationary points, which demonstrate that the isomerization transition state represents a crossover from dominantly covalent to dominantly ionic bonding. In condensed phases, the ion-pair dominated isomerization transition state structure is preferentially stabilized, so that the barrier to isomerization is lowered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the Solution-Phase Structure and Behavior of 8-Hydroxyquinoline Zinc in DMSO

Here, the solution-phase structure and electronic relaxation dynamics of zinc bis-8-hydroxyquinoline [Zn(8HQ) 2 ] in dimethyl sulfoxide (DMSO) were examined using a broad array of spectroscopic techniques, complimented by ab initio calculations of molecular structure. The ground-state structure was determined using extended X-ray absorption fine structure (EXAFS) data collected on the Zn Kedge and diffusion ordered spectroscopy (DOSY) NMR The complex was found to be monomeric and octahedral, with two bidentate 8-hydroxyquinolate ligands and two DMSO molecules coordinated to the zinc through oxygen atoms. Electronic relaxation dynamics were examined with ultrafast transient absorption spectroscopy and complementary density functional calculations. Electronic relaxation was observed to proceed through both singlet and triplet pathways. This solution-phase data provides a deeper physical understanding of the behavior of this molecule, which has a variety of uses such as sensing, OLEDs, and biological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consistent thermodynamic properties for alicyclic components of jet fuels: Experimental data, estimation methods, and homologous series trends

Alkylcycloalkanes represent a significant fraction of jet fuel components. An evaluation of their thermodynamic properties, enthalpies of formation in liquid and gas phases and enthalpies of vaporization, was conducted. A combination of available experimental data, up-to-date group-contribution methods, high-level quantum-chemical calculations, and homologous series trends was used to identify outliers and to recommend the most reliable values. The group-contribution approach was found to work well for the enthalpies of vaporization. Its performance for the enthalpies of formation in the liquid and gas phases was found to be substantially less effective, especially considering notable differences in this property among stereoisomers. Computationally affordable high-level ab initio results and homologous series trend analysis appeared more reliable. In conclusion, the recommended property values for 212 individual compounds and their isomeric mixtures were provided.

09 BIOMASS FUELS↗

Taming convergence in the determinant approach for x-ray excitation spectra

A determinant formalism in combination with ab initio calculations was proposed recently and has paved a way for simulating and interpreting x-ray excitation spectra in condensed-phase systems. The method systematically takes into account many-electron effects in the Mahan-Noziéres-De Dominicis (MND) theory, including core-level excitonic effects, the Fermi-edge singularity, shakeup excitations, and wave function overlap effects such as the orthogonality catastrophe, all within a universal framework using many-electron configurations. A heuristic search algorithm was introduced to search for the configurations that are important for defining the x-ray spectral line shape, instead of enumerating them in a brute-force way. The algorithm has proven to be efficient for calculating O K edges of transition metal oxides, which converge at the second excitation order (denoted as $f^{(n)}$ with n = 2), i.e., the final-state configurations with two e-h pairs (with one hole being the core hole). However, it remains unknown how the determinant x-ray spectra converge for general cases and at which excitation order n should one stop the determinant calculation. Even with the heuristic algorithm, the number of many-electron configurations still grows exponentially with the excitation order n. In this work we prove two theorems that can indicate the order of magnitude of the contribution of the $f^{(n)}$ configurations, so that one can estimate their contribution very quickly without actually calculating their amplitudes. The two theorems are based on singular-value decomposition (SVD) analysis, a method that is widely used to quantify entanglement between two quantum many-body systems. Finally, we examine the K edges of several metallic systems with the determinant formalism up to $f^{(5)}$ to illustrate the usefulness of the theorems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Properties of molten CaCO 3 at high pressure

We report here the structure of molten CaCO3 studied by in situ X-ray diffraction using a Paris-Edinburgh press up to 8.7 GPa. Variations are observed in the medium range order with shrinkage of the intermolecular contributions, reflecting higher packing efficiency of the carbonate molecules. Density of the melt is obtained from the radial distribution functions, assuming a constant coordination number of 3 for the C-O contribution. Bulk modulus values increase by a factor of 2 over the experimental pressure-temperature range, reaching a value similar to that of underlying crystalline phases at the highest pressure investigated. These are the first direct density measurements of compressed CaCO3 melt; they agree well with recent ab initio predictions (Li et al., 2017), which implies that the reported flattening of the melting curve followed by a slightly negative curve above 8 GPa cannot be due to crystal-melt density inversion. Instead, the enthalpy of fusion is likely responsible, and we note the peculiar high diffusivity of oxygen in crystalline calcite-V in this regard, with further implications for the mobility of carbonate melts at depth.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The molecular composition of dense interstellar clouds

Presented in this paper is an ab initio chemical model for dense interstellar clouds that incorporates 598 grain surface reactions, with small grains providing the reaction area. Gas-phase molecules are depleted through collisions with grains. The abundances of 372 chemical species are calculated as a function of time and are found to be of sufficient magnitude to explain most observations. Peak abundances are achieved on time scales of the order of 100,000 to 1 million years, depending on cloud density and kinetic temperature. The reaction rates for ion-molecule chemistry are approximately the same, indicating that surface and gas-phase chemistry may be coupled in certain regions. The composition of grain mantles is shown to be a function of grain radius. In certain grain-size ranges, large molecules containing two or more heavy atoms are more predominant than lighter 'ices' - H2O, NH3, and CH4. It is possible that absorption due to these large molecules in the mantle may contribute to the observed 3-micron band in astronomical spectra.

Allen, M.↗

Magnetic properties of CrFeCoNi based high entropy alloys

Monte Carlo simulations are performed on three high entropy alloys: Cr0.25Fe0.25Co0.25Ni0.25, Cr0.2Fe0.2Co0.2Ni0.2Pd0.2, and Cr0.2Mn0.2Fe0.2Co0.2Ni0.2, with exchange interactions extracted from The ab initio Korringa-Kohn-Rostoker method combined with the coherent potential approximation calculations. Using finite size scaling analyses, we estimate the magnetic phase transition temperature for the four component alloy to be 108(2) K, and although the individual critical exponents are different from 3D Heisenberg universality class, the reduced exponent follows Suzuki weak universality. With the additional Palladium component, the transition temperature elevates to about 200 K. In contrast, we find no magnetic order for the five component alloy with Manganese at any finite temperatures.

Yin, Junqi↗

Particle-hole asymmetric phases in doped twisted bilayer graphene

Twisted bilayer graphene (TBG) has emerged as a paradigmatic platform for exploring the interplay between strong interactions in a multi-band system with nearly flat bands, while offering unprecedented control over the filling fraction of electron/hole carriers. Despite much theoretical work, developing a comprehensive ab initio model for this system has proven challenging due to the inherent trade-off between accurately describing the band structure and incorporating the interactions within the Hamiltonian. Here, we constructed an extended multi-orbital Hubbard model, and performed Hartree-Fock (HF) calculations to explore its phase diagram across commensurate fillings. We found several nearly-degenerate insulating states at charge neutrality, all of which exhibit orbital orders. We also observed that most of the Hartree–Fock ground states exhibit a generalized valley Hund’s-like rule, resulting in valley polarization. Importantly, we show that the incorporation of the intra-valley and inter-valley exchange interactions is crucial to properly stabilize the ordered symmetry-broken states. In agreement with experiments, we find significant particle-hole asymmetry, which underscores the importance of using particle-hole asymmetric models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of disorder on thermodynamic instability of binary Rare-earth – Nickel – Palladium compounds

In this work, we have investigated the thermodynamic stability of disordered rare-earth phases SmX 2 and Sm 10 X 21 (X=Ni, Pd) using machine-learning based analytical descriptor and first-principles density functional theory methods. The absence of Laves phase compounds in R-Pd binary systems is a longstanding problem of rare earth science: even though Ni and Pd belong to the same group of the periodic table and have similar electronic structure, the Pd compound crystallizes in a monoclinic (C2/m) phase with 10:21 stoichiometry, i.e., Sm 10 Pd 21 , while the Ni compound adopts a cubic Laves phase (MgCu 2 ) structure. To understand this contrasting phase stability, we performed thermodynamic convex hull analysis of Sm x Ni 1-x and Sm x Pd 1-x binary systems, which is experimentally validated using powder X-ray diffraction (PXRD) analyzes of polycrystalline Sm(Ni x Pd 1-x ) 2 samples with x=0, 0.5, and 1. A detailed electronic-structure (band-structure, charge density, and Fermi-surface) analysis of the differences between SmNi 2 /SmPd 2 and Sm 10 Ni 21 /Sm 10 Pd 21 compounds provides the quantum mechanical origin of the unfavorable mixing of Pd with Ni in cubic Laves phase. We show that the stability of Sm-Pd in 10:21 stoichiometry arises from improved intra-/inter-layer 5d-4d bonding compared to the 1:2 stoichiometry. Our work emphasizes the importance of ab-initio methods and computationally inexpensive analytical descriptors for the detailed analysis of thermodynamic and electronic properties of hard-to-prepare rare-earth compounds.

36 MATERIALS SCIENCE↗

Transmission electron microscopy and ab initio calculations to relate interfacial intermixing and the magnetism of core/shell nanoparticles

Significant efforts towards understanding bi-magnetic core-shell nanoparticles are underway currently as they provide a pathway towards properties unavailable with single-phased systems. Recently, we have demonstrated that the magnetism of γ-Fe2O3/CoO core-shell nanoparticles, in particular, at high temperatures, originates essentially from an interfacial doped iron-oxide layer that is formed by the migration of Co{sup 2+} from the CoO shell into the surface layers of the γ-Fe2O3 core [Skoropata et al., Phys. Rev. B 89, 024410 (2014)]. To examine directly the nature of the intermixed layer, we have used high-resolution transmission electron microscopy (HRTEM) and first-principles calculations to examine the impact of the core-shell intermixing at the atomic level. By analyzing the HRTEM images and energy dispersive spectra, the level and nature of intermixing was confirmed, mainly as doping of Co into the octahedral site vacancies of γ-Fe2O3. The average Co doping depths for different processing temperatures (150 °C and 235 °C) were 0.56 nm and 0.78 nm (determined to within 5% through simulation), respectively, establishing that the amount of core-shell intermixing can be altered purposefully with an appropriate change in synthesis conditions. Through first-principles calculations, we find that the intermixing phase of γ-Fe2O3 with Co doping is ferromagnetic, with even higher magnetization as compared to that of pure γ-Fe2O3. In addition, we show that Co doping into different octahedral sites can cause different magnetizations. This was reflected in a change in overall nanoparticle magnetization, where we observed a 25% reduction in magnetization for the 235 °C versus the 150 °C sample, despite a thicker intermixed layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗