Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Local atomic structure and Ni nanophase segregation in Zn 1-x Ni x S thin films

Here, the local atomic structure of Zn 1-x Ni x S thin films was investigated using X-ray absorption spectroscopy. The films were grown using RF-sputtering at atomic concentrations x = 0.00, x = 0.04, x = 0.08 and x = 0.14. X-ray diffraction shows that the lattice parameter contracts with increasing Ni concentration, consistent with the smaller atomic radii of Ni compared to that one of Zn. Optical absorption reveals a reduction of the bandgap as Ni concentration increases, except for sample x = 0.14 where a complex behavior is observed. Results from X-ray absorption near edge structure (XANES) spectroscopy indicate a shift in the valence state of Ni for the x = 0.14 sample. The analysis of the extended X-ray absorption fine structure (EXAFS) spectra indicate a contraction of ~0.7 Å in the Ni–S bond distance when compared to the Zn–S bond length, which generates local lattice distortions and an increment of the static disorder as the Ni concentration increases. The EXAFS results for sample x = 0.14 show the presence of a Zn 1-x Ni x S phase and a nanoscopic metallic Ni phase with domain sizes below the diffraction limit. These results reveal that the local atomic structure differs in a significant manner from the average crystalline structure, implying its importance for the determination of the electronic properties of this material.

36 MATERIALS SCIENCE↗

Epitaxial growth and properties of La{sub 0.7}Sr{sub 0.3}MnO{sub 3} thin films with micrometer wide atomic terraces

La{sub 0.7}Sr{sub 0.3}MnO{sub 3} (LSMO) films with extraordinarily wide atomic terraces are epitaxially grown on SrTiO{sub 3} (100) substrates by pulsed laser deposition. Atomic force microscopy measurements on the LSMO films show that the atomic step is ∼4 Å and the atomic terrace width is more than 2 μm. For a 20 monolayers (MLs) LSMO film, the magnetization is determined to be 255 ± 15 emu/cm{sup 3} at room temperature, corresponding to 1.70 ± 0.11 μ{sub B} per Mn atom. As the thickness of LSMO increases from 8 MLs to 20 MLs, the critical thickness for the temperature dependent insulator-to-metal behavior transition is shown to be 9 MLs. Furthermore, post-annealing in oxygen environment improves the electron transport and magnetic properties of the LSMO films.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of local atomic configuration in AlGdN phosphor thin films on deep ultra-violet luminescence intensity

We investigated the narrowband ultraviolet emission properties of Al{sub 0.94}Gd{sub 0.06}N phosphor thin films pumped by an electron beam. An extremely narrow luminescence line, which was less than 1 nm from the intra-orbital f-f transition in Gd{sup 3+} ions, was confirmed at 318 nm. The corresponding emission efficiency was improved by decreasing the growth temperature. The extended X-ray absorption fine structure analysis of the local atomic structure revealed that a low-temperature growth led to the formation of a uniform atomic configuration around Gd, which was found to play a key role in improving the luminescence intensity of the films.

36 MATERIALS SCIENCE↗

Atomic-Layer Engineering of Oxide Superconductors

Molecular beam epitaxy technique has enabled synthesis of atomically smooth thin films, multilayers, and superlattices of cuprates and other complex oxides. Such heterostructures show high temperature superconductivity and enable novel experiments that probe the basic physics of this phenomenon. For example, it was established that high temperature superconductivity and anti-ferromagnetic phases separate on Angstrom scale, while the pseudo-gap state apparently mixes with high temperature superconductivity over an anomalously large length scale (the 'Giant Proximity Effect'). We review some recent experiments on such films and superlattices, including X-ray diffraction, atomic force microscopy, angle-resolved time of flight ion scattering and recoil spectroscopy, transport measurements, high resolution transmission electron microscopy, resonant X-ray scattering, low-energy muon spin resonance, and ultrafast photo-induced reflection high energy electron diffraction. The results include an unambiguous demonstration of strong coupling of in-plane charge excitations to out-of-plane lattice vibrations, a discovery of interface high temperature superconductivity that occurs in a single CuO{sub 2} plane, evidence for local pairs, and establishing tight limits on the temperature range of superconducting fluctuations.

36 MATERIALS SCIENCE↗

Channel cracks in atomic-layer and molecular-layer deposited multilayer thin film coatings

Metal oxide thin film coatings produced by atomic layer deposition have been shown to be an effective permeation barrier. The primary failure mode of such coatings under tensile loads is the propagation of channel cracks that penetrate vertically into the coating films. Recently, multi-layer structures that combine the metal oxide material with relatively soft polymeric layers produced by molecular layer deposition have been proposed to create composite thin films with desired properties, including potentially enhanced resistance to fracture. In this paper, we study the effects of layer geometry and material properties on the critical strain for channel crack propagation in the multi-layer composite films. Using finite element simulations and a thin-film fracture mechanics formalism, we show that if the fracture energy of the polymeric layer is lower than that of the metal oxide layer, the channel crack tends to penetrate through the entire composite film, and dividing the metal oxide and polymeric materials into thinner layers leads to a smaller critical strain. However, if the fracture energy of the polymeric material is high so that cracks only run through the metal oxide layers, more layers can result in a larger critical strain. For intermediate fracture energy of the polymer material, we developed a design map that identifies the optimal structure for given fracture energies and thicknesses of the metal oxide and polymeric layers. These results can facilitate the design of mechanically robust permeation barriers, an important component for the development of flexible electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Efficient Holographic Huygens? Metasurface based on Dielectric Resonant Meta-Atoms.

Subwavelength-thin metasurfaces have shown great promises for the control of optical wavefronts, thus opening new pathways for the development of efficient flat optics. In particular, Huygens’ metasurfaces based on all-dielectric resonant meta-atoms have already shown a huge potential for practical applications with their polarization insensitivity and high transmittance efficiency. Here, we experimentally demonstrate a holographic Huygens’ metasurface based on dielectric resonant meta-atoms capable of complex wavefront control at telecom wavelengths. Our metasurface produces a hologram image in the far-field with 82% transmittance efficiency and 40% imaging efficiency. Such efficient complex wavefront control shows that Huygens’ metasurfaces based on resonant dielectric meta-atoms are a big step towards practical applications of metasurfaces in wavefront design related technologies, including computer-generated holograms, ultra-thin optics, security and data storage devices.

47 OTHER INSTRUMENTATION↗

Atomic layer deposition of superparamagnetic and ferrimagnetic magnetite thin films

One of the key challenges in realizing superparamagnetism in magnetic thin films lies in finding a low-energy growth way to create sufficiently small grains and magnetic domains which allow the magnetization to randomly and rapidly reverse. In this work, well-defined superparamagnetic and ferrimagnetic Fe{sub 3}O{sub 4} thin films are successfully prepared using atomic layer deposition technique by finely controlling the growth condition and post-annealing process. As-grown Fe{sub 3}O{sub 4} thin films exhibit a conformal surface and poly-crystalline nature with an average grain size of 7 nm, resulting in a superparamagnetic behavior with a blocking temperature of 210 K. After post-annealing in H{sub 2}/Ar at 400 °C, the as-grown α−Fe{sub 2}O{sub 3} sample is reduced to Fe{sub 3}O{sub 4} phase, exhibiting a ferrimagnetic ordering and distinct magnetic shape anisotropy. Atomic layer deposition of magnetite thin films with well-controlled morphology and magnetic properties provides great opportunities for integrating with other order parameters to realize magnetic nano-devices with potential applications in spintronics, electronics, and bio-applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding time-resolved processes in atomic-layer etching of ultra-thin Al{sub 2}O{sub 3} film using BCl{sub 3} and Ar neutral beam

We scrutinize time-resolved processes occurring in atomic-layer etching (ALET) of ultra-thin Al{sub 2}O{sub 3} film using BCl{sub 3} gas and Ar neutral beam by employing density functional theory calculations and experimental measurements. BCl{sub 3} gas is found to be preferentially chemisorbed on Al{sub 2}O{sub 3}(100) in trans form with the surface atoms creating O-B and Al-Cl contacts. We disclose that the most likely sequence of etching events involves dominant detachment of Al-associated moieties at early etching stages in good agreement with our concurrent experiments on tracking Al{sub 2}O{sub 3} surface compositional variations during Ar bombardment. In this etching regime, we find that ALET requires half the maximum reaction energy of conventional plasma etching, which greatly increases if the etching sequence changes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial ferromagnetic oxide thin films on silicon with atomically sharp interfaces

A bottleneck in the integration of functional oxides with silicon, either directly grown or using a buffer, is the usual formation of an amorphous interfacial layer. Here, we demonstrate that ferromagnetic CoFe{sub 2}O{sub 4} films can be grown epitaxially on Si(111) using a Y{sub 2}O{sub 3} buffer layer, and remarkably the Y{sub 2}O{sub 3}/Si(111) interface is stable and remains atomically sharp. CoFe{sub 2}O{sub 4} films present high crystal quality and high saturation magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer deposition grown MO{sub x} thin films for solar water splitting: Prospects and challenges

The magnitude of energy challenge not only calls for efficient devices but also for abundant, inexpensive, and stable photoactive materials that can enable efficient light harvesting, charge separation and collection, as well as chemical transformations. Photoelectrochemical systems based on semiconductor materials have the possibility to transform solar energy directly into chemical energy the so-called “solar hydrogen.” The current challenge lies in the harvesting of a larger fraction of electromagnetic spectrum by enhancing the absorbance of electrode materials. In this context, atomically precise thin films of metal oxide semiconductors and their multilayered junctions are promising candidates to integrate high surface areas with well-defined electrode–substrate interface. Given its self-limited growth mechanism, the atomic layer deposition (ALD) technique offers a wide range of capabilities to deposit and modify materials at the nanoscale. In addition, it opens new frontiers for developing precursor chemistry that is inevitable to design new processes. Herein, the authors review the properties and potential of metal oxide thin films deposited by ALD for their application in photoelectrochemical water splitting application. The first part of the review covers the basics of ALD processes followed by a brief discussion on the electrochemistry of water splitting reaction. The second part focuses on different MO{sub x} films deposited by atomic layer deposition for water splitting applications; in this section, The authors discuss the most explored MO{sub x} semiconductors, namely, Fe{sub 2}O{sub 3}, TiO{sub 2}, WO{sub 3}, and ZnO, as active materials and refer to their application as protective coatings, conductive scaffolds, or in heterojunctions. The third part deals with the current challenges and future prospects of ALD processed MO{sub x} thin films for water splitting reactions.

36 MATERIALS SCIENCE↗

Enhanced Oxide Reduction by Hydrogen at Cuprous Oxide–Copper Interfaces near Ascending Step Edges

We report that understanding the dynamic processes involved in the interaction of hydrogen with oxides is of fundamental importance in catalysis. This paper probes the reduction of Cu 2 O-‘29’ surfaces by hydrogen at room temperature combining in situ ambient pressure scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. Reduction of the atomic layer thin Cu 2 O film is observed to be preferentially initiated2 at step edges and terrace defects, where perfect Cu 2 O(111) terraces are found to be stable towards hydrogenation under the same conditions. After a long induction period, regions of partially reduced Cu 2 O-‘29’ and metallic Cu co-exist before the surface is fully reduced to Cu(111). The reduction rate strongly depends on the nature of nearby Cu step edges. We propose a mechanism for the reduction of Cu 2 O-‘29’ by hydrogen where free copper atoms from ascending metallic step edges facilitate the formation of active ensembles for H 2 dissociation and transfer H to the edges of Cu2O regions

08 HYDROGEN↗

“Intelligent” Pt Catalysts Based on Thin LaCoO3 Films Prepared by Atomic Layer Deposition

LaCoO3 films were deposited onto MgAl2O4 powders by atomic layer deposition (ALD) and then used as catalyst supports for Pt. X-ray diffraction (XRD) showed that the 0.5 nm films exhibited a perovskite structure after redox cycling at 1073 K, and scanning transmission electron microscopy and elemental mapping via energy-dispersive X-ray spectroscopy (STEM/EDS) data demonstrated that the films covered the substrate uniformly. Catalysts prepared with 3 wt % Pt showed that the Pt remained well dispersed on the perovskite film, even after repeated oxidations and reductions at 1073 K. Despite the high Pt dispersion, CO adsorption at room temperature was negligible. Compared with conventional Pt on MgAl2O4, the reduced forms of the LaCoO3-containing catalyst were highly active for the CO oxidation and water gas shift (WGS) reactions, while the oxidized catalysts showed much lower activities. Surprisingly, the reduced catalysts were much less active than the oxidized catalysts for toluene hydrogen. Catalysts prepared from thin films of Co3O4 or La2O3 exhibited properties more similar to Pt/MgAl2O4. Possible reasons for how LaCoO3 affects properties are discussed.

42 ENGINEERING↗

Temperature dependence of the superconducting proximity effect quantified by scanning tunneling spectroscopy

Here, we present the first systematic study on the temperature dependence of the extension of the superconducting proximity effect in a 1–2 atomic layer thin metallic film, surrounding a superconducting Pb island. Scanning tunneling microscopy/spectroscopy (STM/STS) measurements reveal the spatial variation of the local density of state on the film from 0.38 up to 1.8 K. In this temperature range the superconductivity of the island is almost unaffected and shows a constant gap of a 1.20 ± 0.03 meV. Using a superconducting Nb-tip a constant value of the proximity length of 17 ± 3 nm at 0.38 and 1.8 K is found. In contrast, experiments with a normal conductive W-tip indicate an apparent decrease of the proximity length with increasing temperature. This result is ascribed to the thermal broadening of the occupation of states of the tip, and it does not reflect an intrinsic temperature dependence of the proximity length. Our tunneling spectroscopy experiments shed fresh light on the fundamental issue of the temperature dependence of the proximity effect for atomic monolayers, where the intrinsic temperature dependence of the proximity effect is comparably weak.

36 MATERIALS SCIENCE↗

Low-frequency dielectric properties of intrinsic and Al-doped rutile TiO{sub 2} thin films grown by the atomic layer deposition technique

Dielectric spectroscopy is carried out for intrinsic and aluminum-doped TiO{sub 2} rutile films which are deposited on RuO{sub 2} by the atomic layer deposition technique. Capacitance and conductance are measured in the 0.1 Hz–100 kHz range, for ac electric fields up to 1 MV{sub rms}/cm. Intrinsic films have a much lower dielectric constant than rutile crystals. This is ascribed to the presence of oxygen vacancies which depress polarizability. When Al is substituted for Ti, the dielectric constant further decreases. By considering Al-induced modification of polarizability, a theoretical relationship between the dielectric constant and the Al concentration is proposed. Al doping drastically decreases the loss in the very low frequency part of the spectrum. However, Al doping has almost no effect on the loss at high frequencies. The effect of Al doping on loss is discussed through models of hopping transport implying intrinsic oxygen vacancies and Al related centers. When increasing the ac electric field in the MV{sub rms}/cm range, strong voltage non-linearities are evidenced in undoped films. The conductance increases exponentially with the ac field and the capacitance displays negative values (inductive behavior). Hopping barrier lowering is proposed to explain high-field effects. Finally, it is shown that Al doping strongly improves the high-field dielectric behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thickness-dependent growth orientation of F-doped ZnO films formed by atomic layer deposition

ZnO thin films were doped with fluorine using atomic layer deposition (ALD) with an in-house F source at a deposition temperature of 140 °C. Structural and morphological properties of the resulting F-doped ZnO (ZnO:F) films were investigated by x-ray diffraction analysis, field emission scanning electron microscopy, and grazing incidence wide-angle x-ray diffraction. During the initial growth stage of up to 200 ALD cycles, no difference was observed between the preferred growth orientations of undoped ZnO and ZnO:F films. However, after 300 ALD cycles, ZnO and ZnO:F films showed (002) and (100) preferred orientation, respectively. This difference in preferred growth orientation arose from the perturbation-and-passivation effect of F doping, which involves F anions filling the oxygen-related defect sites in the ZnO lattice. Ultraviolet photoelectron spectroscopic analyses were carried out to investigate the surface plane dependency of the films' work functions, which confirmed that the ZnO and ZnO:F films had different growth behaviors.

36 MATERIALS SCIENCE↗

Atomic layer deposited nanocrystalline tungsten carbides thin films as a metal gate and diffusion barrier for Cu metallization

Tungsten carbides (WC{sub x}) thin films were deposited on thermally grown SiO{sub 2} substrates by atomic layer deposition (ALD) using a fluorine- and nitrogen-free W metallorganic precursor, tungsten tris(3-hexyne) carbonyl [W(CO)(CH{sub 3}CH{sub 2}C ≡ CCH{sub 2}CH{sub 3}){sub 3}], and N{sub 2} + H{sub 2} plasma as the reactant at deposition temperatures between 150 and 350 °C. The present ALD-WC{sub x} system showed an ALD temperature window between 200 and 250 °C, where the growth rate was independent of the deposition temperature. Typical ALD characteristics, such as self-limited film growth and a linear dependency of the film grown on the number of ALD cycles, were observed, with a growth rate of 0.052 nm/cycle at a deposition temperature of 250 °C. The ALD-WC{sub x} films formed a nanocrystalline structure with grains, ∼2 nm in size, which consisted of hexagonal W{sub 2}C, WC, and nonstoichiometric cubic β-WC{sub 1−x} phase. Under typical deposition conditions at 250 °C, an ALD-WC{sub x} film with a resistivity of ∼510 μΩ cm was deposited and the resistivity of the ALD-WC{sub x} film could be reduced even further to ∼285 μΩ cm by further optimizing the reactant pulsing conditions, such as the plasma power. The step coverage of ALD-WC{sub x} film was ∼80% on very small sized and dual trenched structures (bottom width of 15 nm and aspect ratio of ∼6.3). From ultraviolet photoelectron spectroscopy, the work function of the ALD-WC{sub x} film was determined to be 4.63 eV. Finally, the ultrathin (∼5 nm) ALD-WC{sub x} film blocked the diffusion of Cu, even up to 600 °C, which makes it a promising a diffusion barrier material for Cu interconnects.

36 MATERIALS SCIENCE↗

Self‐Assembled LuFeO 3 /LuFe 2 O 4 Heterostructure with Emergent Ferroic Orderings

Abstract Achieving self‐assembling structures that exhibit emergent properties and functionalities is one of the holy grails in nanotechnology and holds great promise for a wide range of potential applications. Herein, a self‐assembled LuFeO 3 –(1/3)LuFe 2 O 4 –LuFeO 3 heterostructure that consists of two model multiferroics, i.e., hexagonal LuFeO 3 and rhombohedral LuFe 2 O 4 , is reported in single‐layer epitaxial LuFeO 3 thin films. Atomic‐scale electron microscopy investigations reveal the spontaneous organization of ferroelectric polarization in each building block, which forms a series of polar configurations. Specifically, the charge and lattice of neighboring LuFeO 3 and LuFe 2 O 4 blocks are closely coupled with competing degrees of freedom. A combination of the quantitative analysis of atomically resolved images and spectroscopy with theoretical calculations determines how charge‐ordering‐induced polarization accommodates charge naturality across the interfaces to reduce the system energy and unravels the formation mechanism of this heterostructure. The results point to the possibilities of generation and control of multiferroic self‐assembled systems, which may provide a basis for engineering novel materials with emergent properties.

Deng, Shiqing↗

Insights in High-Temperature Superconductivity from the Study of Films and Heterostructures Synthesized by Molecular Beam Epitaxy

Using molecular beam epitaxy, we synthesize atomically smooth thin films, multilayers and superlattices of cuprate high-temperature superconductors (HTS). Such heterostructures enable novel experiments that probe the basicphysics of HTS. For example, we have established that HTS and antiferromagnetic phases separate on Ångstrom scale, while the pseudo-gap state apparently mixes with HTS over an anomalously large length scale ('Giant Proximity Effect'). Here, we briefly review our most recent experiments on such films and superlattices. The new results include an unambiguous demonstration of strong coupling of in-plane charge excitations to out-of-plane lattice vibrations and the discovery of interface HTS.

36 MATERIALS SCIENCE↗