Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Energy dissipation channels affecting photoluminescence from resonantly excited Er{sup 3+} ions doped in epitaxial ZnO host films

We identified prerequisite conditions to obtain intense photoluminescence at 1.54 μm from Er{sup 3+} ions doped in ZnO host crystals. The epitaxial ZnO:Er films were grown on sapphire C-plane substrates by sputtering, and Er{sup 3+} ions were resonantly excited at a wavelength of 532 nm between energy levels of {sup 4}I{sub 15/2} and {sup 2}H{sub 11/2}. There is a threshold deposition temperature between 500 and 550 °C, above which epitaxial ZnO films become free of miss-oriented domains. In this case, Er{sup 3+} ions are outside ZnO crystallites, having the same c-axis lattice parameters as those of undoped ZnO crystals. The improved crystallinity was correlated with enhanced emissions peaking at 1538 nm. Further elevating the deposition temperature up to 650 °C generated cracks in ZnO crystals to relax the lattice mismatch strains, and the emission intensities from cracked regions were three times as large as those from smooth regions. These results can be consistently explained if we assume that emission-active Er{sup 3+} ions are those existing at grain boundaries and bonded to single-crystalline ZnO crystallites. In contrast, ZnO:Er films deposited on a ZnO buffer layer exhibited very weak emissions because of their degraded crystallinity when most Er{sup 3+} ions were accommodated into ZnO crystals. Optimizing the degree of oxidization of ZnO crystals is another important factor because reduced films suffer from non-radiative decay of excited states. The optimum Er content to obtain intense emissions was between 2 and 4 at. %. When 4 at. % was exceeded, the emission intensity was severely attenuated because of concentration quenching as well as the degradation in crystallinity. Precipitation of Er{sub 2}O{sub 3} crystals was clearly observed at 22 at. % for films deposited above 650 °C. Minimizing the number of defects and impurities in ZnO crystals prevents energy dissipation, thus exclusively utilizing the excitation energy to emissions from Er{sup 3+} ions.

36 MATERIALS SCIENCE↗

Coalescence of GaAs on (001) Si nano-trenches based on three-stage epitaxial lateral overgrowth

The coalescence of selective area grown GaAs regions has been performed on patterned 1.8 μm GaAs buffer layer on Si via metal-organic chemical vapor deposition. We propose a promising method of three-stage epitaxial lateral overgrowth (ELO) to achieve uniform coalescence and flat surface. Rough surface caused by the coalescence of different growth fronts is smoothened by this method. Low root-mean-square surface roughness of 6.29 nm has been obtained on a 410-nm-thick coalesced ELO GaAs layer. Cross-sectional transmission electron microscope study shows that the coalescence of different growth fronts will induce some new dislocations. However, the coalescence-induced dislocations tend to mutually annihilate and only a small part of them reach the GaAs surface. High optical quality of the ELO GaAs layer has been confirmed by low temperature (77 K) photoluminescence measurements. This research promises a very large scale integration platform for the monolithic integration of GaAs-based device on Si.

36 MATERIALS SCIENCE↗

Ferromagnetic properties of fcc Gd thin films

Magnetic properties of sputtered Gd thin films grown on Si (100) substrates kept at two different temperatures were investigated using X-ray diffraction, ac magnetic susceptibility, and dc magnetization measurements. The obtained Gd thin films have a mixture of hcp and fcc structures, but with their fractions depending on the substrate temperature T{sub S} and film thickness x. Gd fcc samples were obtained when T{sub S} = 763 K and x = 10 nm, while the hcp structure was stabilized for lower T{sub S} (300 K) and thicker film (20 nm). The fcc structure is formed on the Ta buffer layer, while the hcp phase grows on the fcc Gd layer as a consequence of the lattice relaxation process. Spin reorientation phenomenon, commonly found in bulk Gd species, was also observed in the hcp Gd thin film. This phenomenon is assumed to cause the magnetization anomalous increase observed below 50 K in stressed Gd films. Magnetic properties of fcc Gd thin films are: Curie temperature above 300 K, saturation magnetization value of about 175 emu/cm{sup 3}, and coercive field of about 100 Oe at 300 K; features that allow us to classify Gd thin films, with fcc structure, as a soft ferromagnetic material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Arrays of ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2} nanocables with tunable shell composition for efficient photovoltaics

Arrays of one-dimensional (1D) nanostructure are receiving much attention for their optoelectronic and photovoltaic applications due to their advantages in light absorption, charge separation, and transportation. In this work, arrays of ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2} core/shell nanocables with tunable shell compositions over the full range of 0 ≤ x ≤ 1 have been controllably synthesized. Chemical conversions of ZnO nanorods to a series of ZnO-based nanocables, including ZnO/ZnSe, ZnO/CuSe, ZnO/CuSe/In{sub x}Ga{sub 1−x}, ZnO/CuSe/(In{sub x}Ga{sub 1−x}){sub 2}Se{sub 3}, and ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2}, are well designed and successfully achieved. Composition-dependent influences of the CuIn{sub x}Ga{sub 1−x}Se{sub 2} shells on photovoltaic performance are investigated. It is found that the increase in indium content (x) leads to an increase in short-circuit current density (J{sub SC}) but a decrease in open-circuit voltage (V{sub OC}) for the ZnO/CuIn{sub x}Ga{sub 1−x}Se{sub 2} nanocable solar cells. An array of ZnO/CuIn{sub 0.67}Ga{sub 0.33}Se{sub 2} nanocables with a length of ∼1 μm and a shell thickness of ∼10 nm exhibits a bandgap of 1.20 eV, and yields a maximum power conversion efficiency of 1.74% under AM 1.5 G illumination at an intensity of 100 mW/cm{sup 2}. It dramatically surpasses that (0.22%) of the ZnO/CuIn{sub 0.67}Ga{sub 0.33}Se{sub 2} planar thin-film device. Our work reveals that 1D nanoarray allows efficient photovoltaics without using toxic CdS buffer layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AlN texturing and piezoelectricity on flexible substrates for sensor applications

We show that AlN-based piezocapacitors with relatively high piezoelectric coefficient (d{sub 33}) values (3–4 pC/N) can be fabricated on polyimide (PI) substrates at 160 °C or even at room temperature by sputtering processes. With respect to PI, a reduction of the piezoelectric performances was observed on polyethylene naphthalate (PEN). With the same approach, a d{sub 33} value as high as 8 pC/N was achieved on rigid substrates (SiO{sub 2}/Si). In all cases, a thin Al buffer layer was deposited, immediately before AlN, without breaking the vacuum in the deposition chamber, in order to preserve the interface from contaminations that would obstruct the optimal atomic stratification with the desired [0001] growth axis. The piezoelectric behavior was thus correlated to the degree of texturing of the AlN layer through the evaluation of the XRD texturing coefficients and to the morphology by means of AFM analyses. We show that a high level of roughness introduced by the PEN substrate, coupled with the effect of the substrate flexibility on the piezoelectric coefficient, reduces the impact of the AlN texturing on the d{sub 33} values.

36 MATERIALS SCIENCE↗

Heterointegration of InGaAs/GaAs quantum wells on micro-patterned Si substrates

InGaAs/GaAs quantum wells (QWs) grown on μ-patterned Ge/Si substrates by metal organic vapor phase epitaxy are investigated by electron microscopy and spatially resolved photoluminescence (PL) spectroscopy. The lattice parameter mismatch of GaAs and Si is overcome by a Ge buffer layer grown by low-energy plasma enhanced chemical vapor deposition. The GaAs crystals form truncated pyramids whose shape is strongly affected by the geometry of the underlying pattern consisting of 8 μm deep and 3–50 μm wide square Si pillars. Comparing the measured PL energies with calculations performed in the effective mass approximation reveals that the QW emission energies are significantly influenced by the GaAs morphology. It is shown that the geometry favors indium diffusion during growth from the inclined facets towards the top (001) facet. The Si pillar-size dependent release of thermally induced strain observed in the PL measurements is confirmed by X-ray diffraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modifying magnetic properties of ultra-thin magnetite films by growth on Fe pre-covered MgO(001)

Iron oxide films were reactively grown on iron buffer films, which were deposited before on MgO(001) substrates to analyze the influence of the initial iron buffer layers on the magnetic properties of the magnetite films. X-ray photoelectron spectroscopy and low energy electron diffraction showed that magnetite films of high crystalline quality in the surface near region were formed by this two-step deposition procedure. The underlying iron film, however, was completely oxidized as proved by x-ray reflectometry and diffraction. The structural bulk quality of the iron oxide film is poor compared to magnetite films directly grown on MgO(001). Although the iron film was completely oxidized, we found drastically modified magnetic properties for these films using the magnetooptic Kerr effect. The magnetite films had strongly increased coercive fields, and their magnetic in-plane anisotropy is in-plane rotated by 45∘ compared to magnetite films formed directly by one step reactive growth on MgO(001)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ridge InGaAs/InP multi-quantum-well selective growth in nanoscale trenches on Si (001) substrate

Metal organic chemical vapor deposition of InGaAs/InP multi-quantum-well in nanoscale V-grooved trenches on Si (001) substrate was studied using the aspect ratio trapping method. A high quality GaAs/InP buffer layer with two convex (111) B facets was selectively grown to promote the highly uniform, single-crystal ridge InP/InGaAs multi-quantum-well structure growth. Material quality was confirmed by transmission electron microscopy and room temperature micro-photoluminescence measurements. This approach shows great promise for the fabrication of photonics devices and nanolasers on Si substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of the electronic structure of C{sub 60}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} interface

The evolution of the electronic structure at the interface between fullerene (C{sub 60}) and La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO) has been investigated with ultraviolet photoemission spectroscopy and X-ray photoemission spectroscopy. There is a 0.61 eV barrier for the electrons to be injected from LSMO to C{sub 60}. The energy bands keep bending upward with increasing C{sub 60} thickness. A total energy bending of 0.72 eV is observed, changing the C{sub 60} film from n-type to p-type. The n-p transition is ascribed to the diffusion of oxygen from LSMO to C{sub 60} which subsequently strips electrons from C{sub 60}, making the latter p-type. Our results suggest a buffer layer be inserted between the LSMO and C{sub 60} to lower the interface electron barrier and prevent deterioration of the C{sub 60} film in related spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving the structural quality and electrical resistance of SrTiO{sub 3} thin films on Si (001) via a two-step anneal

We report on the optimization of structural and electrical properties of SrTiO{sub 3} thin films grown on Si (001) by hybrid molecular beam epitaxy. Using a dual buffer layer template, 46-nm-thick films grown at high temperatures (850 °C) resulted in a layer-by-layer growth mode and a good crystalline quality with rocking curve full width at half maximum (FWHM) of the 002 SrTiO{sub 3} peak of nearly 0.6°, which was reduced to 0.4° by increasing the film thickness to 120 nm. A high temperature post-deposition anneal was employed to further reduce the rocking curve FWHM down to 0.2° while preserving a smooth film surface morphology. The low sheet resistance of as-grown and post-growth annealed samples was increased by five orders of magnitude exceeding 10{sup 7} Ω/◻ using a lower temperature anneal in dry air. This two-step annealing method provides an easy and effective way to improve the crystalline quality of SrTiO{sub 3} thin films on Si, providing a path towards the development of electrically insulating, wafer scale virtual perovskite substrates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain dependence of In incorporation in m-oriented GaInN/GaN multi quantum well structures

We demonstrate a strong dependence of the indium incorporation efficiency on the strain state in m-oriented GaInN/GaN multi quantum well (MQW) structures. Insertion of a partially relaxed AlInN buffer layer opens up the opportunity to manipulate the strain situation in the MQW grown on top. By lattice-matching this AlInN layer to the c- or a-axis of the underlying GaN, relaxation towards larger a- or smaller c-lattice constants can be induced, respectively. This results in a modified template for the subsequent MQW growth. From X-ray diffraction and photoluminescence measurements, we derive significant effects on the In incorporation efficiency and In concentrations in the quantum well (QW) up to x = 38% without additional accumulation of strain energy in the QW region. This makes strain manipulation a very promising method for growth of high In-containing MQW structures for efficient, long wavelength light-emitting devices.

36 MATERIALS SCIENCE↗

Diamagnetism to ferromagnetism in Sr-substituted epitaxial BaTiO{sub 3} thin films

We report on the ferromagnetic-like behavior in otherwise diamagnetic BaTiO{sub 3} (BTO) thin films upon doping with non-magnetic element Sr having the composition Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3} (BST). The epitaxial integration of BST (∼800 nm) thick films on Si (100) substrate was achieved using MgO (40 nm) and TiN (20 nm) as buffer layers to prepare BST/MgO/TiN/Si (100) heterostructure by pulsed laser deposition. The c-axis oriented and cube-on-cube epitaxial BST is formed on Si (100) as evidenced by the in-plane and out-of-plane X-ray diffraction. All the deposited films are relaxed through domain matching epitaxy paradigm as observed from X-ray diffraction pattern and A{sub 1}TO{sub 3} mode (at 521.27 cm{sup −1}) of Raman spectra. As-deposited BST thin films reveal ferromagnetic-like properties, which persist up to 400 K. The magnetization decreases two-fold upon oxygen annealing. In contrast, as-deposited un-doped BTO films show diamagnetism. Electron spin resonance measurements reveal no evidence of external magnetic impurities. XRD and X-ray photoelectron spectroscopy spectra show significant changes influenced by Sr doping in BTO. The ferromagnetic-like behavior in BST could be due to the trapped electron donors from oxygen vacancies resulting from Sr-doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Selective-area growth of GaN nanowires on SiO{sub 2}-masked Si (111) substrates by molecular beam epitaxy

We analyze a method to selectively grow straight, vertical gallium nitride nanowires by plasma-assisted molecular beam epitaxy (MBE) at sites specified by a silicon oxide mask, which is thermally grown on silicon (111) substrates and patterned by electron-beam lithography and reactive-ion etching. The investigated method requires only one single molecular beam epitaxy MBE growth process, i.e., the SiO{sub 2} mask is formed on silicon instead of on a previously grown GaN or AlN buffer layer. We present a systematic and analytical study involving various mask patterns, characterization by scanning electron microscopy, transmission electron microscopy, and photoluminescence spectroscopy, as well as numerical simulations, to evaluate how the dimensions (window diameter and spacing) of the mask affect the distribution of the nanowires, their morphology, and alignment, as well as their photonic properties. Capabilities and limitations for this method of selective-area growth of nanowires have been identified. A window diameter less than 50 nm and a window spacing larger than 500 nm can provide single nanowire nucleation in nearly all mask windows. The results are consistent with a Ga diffusion length on the silicon dioxide surface in the order of approximately 1 μm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High ferroelectric polarization in c-oriented BaTiO 3 epitaxial thin films on SrTiO 3 /Si(001)

The integration of epitaxial BaTiO 3 films on silicon, combining c-orientation, surface flatness, and high ferroelectric polarization is of main interest towards its use in memory devices. This combination of properties has been only achieved so far by using yttria-stabilized zirconia buffer layers. Here, the all-perovskite BaTiO 3 /LaNiO 3 /SrTiO 3 heterostructure is grown monolithically on Si(001). The BaTiO 3 films are epitaxial and c-oriented and present low surface roughness and high remnant ferroelectric polarization around 6 μC/cm 2 . Lastly, this result paves the way towards the fabrication of lead-free BaTiO 3 ferroelectric memories on silicon platforms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

van der Waals epitaxy of CdTe thin film on graphene

van der Waals epitaxy (vdWE) facilitates the epitaxial growth of materials having a large lattice mismatch with the substrate. Although vdWE of two-dimensional (2D) materials on 2D materials have been extensively studied, the vdWE for three-dimensional (3D) materials on 2D substrates remains a challenge. It is perceived that a 2D substrate passes little information to dictate the 3D growth. Here in this article, we demonstrated the vdWE growth of the CdTe(111) thin film on a graphene buffered SiO 2 /Si substrate using metalorganic chemical vapor deposition technique, despite a 46% large lattice mismatch between CdTe and graphene and a symmetry change from cubic to hexagonal. Our CdTe films produce a very narrow X-ray rocking curve, and the X-ray pole figure analysis showed 12 CdTe (111) peaks at a chi angle of 70°. This was attributed to two sets of parallel epitaxy of CdTe on graphene with a 30° relative orientation giving rise to a 12-fold symmetry in the pole figure. First-principles calculations reveal that, despite the relatively small energy differences, the graphene buffer layer does pass epitaxial information to CdTe as the parallel epitaxy, obtained in the experiment, is energetically favored. The work paves a way for the growth of high quality CdTe film on a large area as well as on the amorphous substrates.

36 MATERIALS SCIENCE↗

Thin-film GaN Schottky diodes formed by epitaxial lift-off

The performance of thin-film GaN Schottky diodes fabricated using a large-area epitaxial lift-off (ELO) process is reported in this work. Comparison of the device characteristics before and after lift-off processing reveals that the Schottky barrier height remains unchanged by the liftoff processing and is consistent with expectations based on metal-semiconductor work function differences, with a barrier height of approximately 1 eV obtained for Ni/Au contacts on n− GaN. However, the leakage current in both reverse and low-forward-bias regimes is found to improve significantly after ELO processing. Likewise, the ideality factor of the Schottky diodes also improves after ELO processing, decreasing from n = 1.12–1.18 before ELO to n = 1.04–1.10 after ELO. A possible explanation for the performance improvement obtained for Schottky diodes after substrate removal by ELO processing is the elimination of leakage paths consisting of vertical leakage along threading dislocations coupled with lateral conduction through the underlying n+ buffer layer that is removed in the ELO process. Epitaxial liftoff with GaN may enable significant improvement in device performance and economics for GaN-based electronics and optoelectronics.

Wang, Jingshan↗

Electronic structure of epitaxial half-Heusler Co 1-x Ni x TiSb across the semiconductor to metal transition

In this paper, we report on the growth, electronic, and surface properties of the electron-doped half-Heusler series Co 1-x Ni x TiSb (001) grown by molecular beam epitaxy. High-quality epitaxial growth of thin films is achieved on InP (001) substrates using an InAlAs buffer layer for all nickel concentrations. The semiconductor to metal transition as a function of substitutional alloying was examined using electrical transport, Seebeck measurements, and angle-resolved photoemission spectroscopy (ARPES). Temperature-dependent electrical transport measurements of films with composition x ≤ 0.1 exhibit thermally activated behavior while x > 0.1 exhibit metallic behavior. Smooth, highly ordered film surfaces can be achieved following ex-situ transfer of the films and subsequent desorption of a sacrificial, protective antimony capping layer. Using this transfer technique, ARPES experiments were performed to investigate the effects of nickel alloying on the electronic band structure. Finally, an electron pocket is observed below the Fermi level at the bulk X point for compositions x > 0.1, in accordance with the crossover from semiconducting to metallic behavior observed in the transport measurements.

36 MATERIALS SCIENCE↗

Epitaxial integration and properties of SrRuO 3 on silicon

We report the integration of SrRuO 3 , one of the most widely used oxide electrode materials in functional oxide heterostructures, with silicon using molecular-beam epitaxy and an SrTiO 3 buffer layer. The resulting SrRuO 3 film has a rocking curve full width at half maximum of 0.01°, a resistivity at room temperature of 250 μΩ cm, a residual resistivity ratio (ρ 300 K/ρ 4 K) of 11, and a paramagnetic-to-ferromagnetic transition temperature of ~160 K. These structural, electrical, and magnetic properties compare favorably to the best reported values for SrRuO 3 films on silicon and rival those of epitaxial SrRuO 3 films produced directly on SrTiO 3 single crystals by thin film growth techniques other than molecular-beam epitaxy. These high quality SrRuO 3 films with metallic conductivity on silicon are relevant to integrating multi-functional oxides with the workhorse of semiconductor technology, silicon.

36 MATERIALS SCIENCE↗