Search NASA⌕ Search

SEARCH · Search NASA

Results for “coupling coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Line Coupling in Atmospheric Spectra

The theoretical modeling of atmospheric spectra is important for a number of different applications: for instance, in the determination of minor atmospheric constituents such as ozone, carbon dioxide, CFC's etc.; in monitoring the temperature profile for climate studies; and in measuring the incoming and outgoing radiation to input into global climate models. In order to accomplish the above mentioned goal, one needs to know the spectral parameters characterizing the individual spectral lines (frequency, width, strength, and shape) as well as the physical parameters of the atmosphere (temperature, abundances, and pressure). When all these parameters are known, it is usually assumed that the resultant spectra and concomitant absorption coefficient can then be calculated by a superposition of individual profiles of appropriate frequency, strength and shape. However, this is not true if the lines are 'coupled'. Line coupling is a subtle effect that takes place when lines of a particular molecule overlap in frequency. In this case when the initial states and the final states of two transitions are connected by collisions, there is a quantum interference resulting in perturbed shapes. In general, this results in the narrowing of Q-branches (those in which the rotational quantum number does not change), and vibration-rotational R- and P branches (those in which the rotational quantum number changes by +/- 1), and in the spectral region beyond band heads (regions where the spectral lines pile up due to centrifugal distortion). Because these features and spectral regions are often those of interest in the determination of the abundances and pressure-temperature profiles, one must take this effect into account in atmospheric models.

Tipping, R. H.↗
NASA NTRS1993

Vibration-dissociation coupling in CO, N2 and O2 - An evaluation of analytic transition rate expressions

Closed form expressions for inelastic state-to-state and state-specific dissociative rate coefficients for utilization in vibrational master equation studies of shock heated CO, N2, and O2 highly dilute in Ar are considered. The master equation is linearized by neglecting diatom-diatom collisions and recombination. Master equation results indicate that the most significant contribution to dissociation comes from low and mid lying vibrational levels.

Gonzales, David A.↗
NASA NTRS1977

Line strengths, collision strengths and excitation rates for multiply-charged silicon ions

In the present paper, the line strengths, collision strengths, and rate coefficients are calculated for a variety of transitions in multiply charged silicon ions from Si(VI) to Si(XIV). The line strengths are obtained by using Clementi wave functions for the ground-state configuration, and excited-state wave functions generated by a semiempirical method. The collision strengths are calculated in an LS coupling scheme in the distorted-wave approximation, neglecting exchange except for the helium-like transitions. These results are then integrated over a Maxwellian velocity distribution function to yield rate coefficients. The rates are presented graphically and also in terms of a two-parameter fit.

Davis, J.↗
DOE OSTI2025

Approach to Evaluating Reorganization Energies of Interfacial Electrochemical Reactions

Reaction rate coefficients for electron-transfer processes at the electrode–electrolyte interface are commonly estimated by using the Butler–Volmer equation, but their values are inaccurate beyond a few tenths of volts of overpotential. The Marcus–Hush–Chidsey (MHC) formalism yields correct asymptotic behavior of the rate coefficients vs applied overpotential but has complex dependencies on the redox system’s intrinsic parameters, which can be difficult to model or measure. In this work, we bridge the two kinetics formalisms to estimate the reorganization energy, one of the important parameters for the MHC formalism, and investigate its dependence on other intrinsic parameters such as activation barriers, electronic coupling strength, and the density of states of the electrode surface. We examine the sensitivity of the reorganization energy to these parameters, establish some general relationships for accurately predicting rate coefficients using the MHC formalism over a wide range of applied overpotentials, and compare this approach to calculating MHC rate constants with other empirical approaches for the mechanisms of CO 2 reduction on different metal electrode surfaces.

Butler−Volmer↗
DOE OSTI2023

Phonon dynamics in the generalized Kitaev spin liquid

Candidate materials for the Kitaev spin liquid generically have residual interactions beyond the Kitaev coupling. It therefore becomes necessary to understand how signatures of the quantum spin liquid, e.g., fractionalization of the spin excitations, are affected by the presence of these interactions. Recently it was shown that phonon dynamics is an indirect but effective probe to study fractionalized excitations in the Kitaev spin liquid. Ultrasound experiments can measure sound attenuation, which should show characteristic temperature and angular dependence of the sound-attenuation coefficient if the scattering of phonons happens predominantly on Majorana fermions. So far the computation of the sound attenuation was only done in the pure spin-phonon coupled Kitaev model, without taking into account residual interactions. In order to understand experimental signatures, here we present a mean-field study of the sound attenuation in the generalized J-K_Γ model, which is relevant to candidate materials. Further, our findings show that as long as the system is in the spin liquid phase, characteristic features of the sound attenuation remain observable even in the presence of residual interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Sensitivity of EDM experiments in paramagnetic atoms and molecules to hadronic CP violation

Experiments searching for the electric dipole moment (EDM) of the electron d e utilize atomic/molecular states with one or more uncompensated electron spins, and these paramagnetic systems have recently achieved remarkable sensitivity to d e . If the source of CP violation resides entirely in the hadronic sector, the two-photon exchange processes between electrons and the nucleus induce CP-odd semileptonic interactions, parametrised by the Wilson coefficient C SP , and provide the dominant source of EDMs in paramagnetic systems instead of d e . We evaluate the C SP coefficients induced by the leading hadronic sources of CP violation, namely nucleon EDMs and CP-odd pion-nucleon couplings, by calculating the nucleon-number-enhanced CP-odd nuclear scalar polarisability, employing chiral perturbation theory at the nucleon level and the Fermi-gas model for the nucleus. This allows us to translate the ACME EDM limits from paramagnetic ThO into novel independent constraints on the QCD theta term |$\bar θ$| < 3 × 10 –8 , proton EDM |d p | < 2 × 10 –23 e cm, isoscalar CP-odd pion-nucleon coupling |$\bar g$$^{(1)}_{πNN}$| < 4 × 10 –10 , and color EDMs of quarks |$\tilde d$ u -$\tilde $d d | < 2 × 10 –24 cm. We note that further experimental progress with EDM experiments in paramagnetic systems may allow them to rival the sensitivity of EDM experiments with neutrons and diamagnetic atoms to these quantities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

MoorPy (Quasi-Static Mooring Analysis in Python)

MoorPy is a quasi-static mooring model and a suite of associated functions for mooring system analysis. The core model supports quasi-static analysis of moored floating systems including any arrangement of mooring lines and floating platforms. It solves the distributed position and tension of each mooring line segment using standard catenary equations. Floating platforms can be represented with linear hydrostatic characteristics. MoorPy automatically computes a floating system's equilibrium state and can be queried to identify a mooring system's nonlinear force-displacement relationships. Linearized stiffness matrices are efficiently computed using semi-analytic Jacobians. MoorPy also includes plotting functions and a library of mooring component property and cost coefficients. MoorPy can be used directly from Python scripts to perform mooring design and analysis tasks, or it can be coupled with other tools to compute quasi-static mooring reactions as part of a larger simulation.

Hall, Mathew↗
DOE OSTI2022

Simultaneous mitigation of density and energy errors in approximate DFT for transition metal chemistry (Final Technical Report)

There were three major goals and objectives of this project: 1) Develop tools to understand density-driven errors in transition metal complexes, 2) Evaluate and minimize energy delocalization error and static correlation error through judicious functional choice, and 3) applying this workflow to machine-learning accelerated screening of redox couples. Over the reporting period, we developed a framework for eliminating flat plane errors. We introduced fully non-empirical coefficients. We demonstrated the approach on both molecules and solids. We investigated and eliminated density driven errors and demonstrated their impact on potential energy surfaces. We trained machine learning models both in a method-dependent fashion and to predict errors in method accuracy. We built large data sets of small molecule energetics and multi-reference character.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1975

Analytical modeling requirements for tilting proprotor aircraft dynamics

Proprotor and cantilever wing aeroelastic behavior is applied to a gimballed rotor and a hingeless rotor to develop an analytical model for prediction of tilting proprotor aircraft dynamics. Particular attention is given to: the influence of coupled flap/lag bending modes; the influence of rotor blade torsion degrees of freedom on proprotor dynamics; and, to a constant coefficient approximation representing the dynamics in nonaxial flow through the rotor. The following are also examined: the number of blade bending and torsion modes required; the influence of the rotor aerodynamic model; the influence of the blade trim bending deflection; the importance of the rotor rotational speed degree of freedom; and the effect of the wing aerodynamic forces. The origin of the significant influence of the blade pitch motion on the proprotor dynamics is discussed.

Johnson, W.↗
NASA NTRS1977

Noncausal propagation in spin-0 theories with external field interactions

The two-component Sakata-Taketani (ST) spin-0 theory and the single-component Klein-Gordon theory are obtained from the five-component Duffin-Kemmer-Petiau (DKP) theory with six types of external field interactions by means of a Peirce decomposition. Whereas the DKP equation manifests the covariance, the ST equation manifests the causal properties. In particular, the presence of noncausal wave propagation when there is coupling to a second-rank tensor field is apparent from the form of the ST equation, in which the coefficients of all the space derivatives depend on the external field. The results indicate that the causal properties of higher-spin equations should also be obvious when they are expressed in 2(2J + 1)-component Schroedinger form

Guertin, R. F.↗
NASA NTRS1977

Sakata-Taketani spin-0 theory with external field interactions - Lagrangian formalism and causal properties

To illustrate that a relativistic field theory need not be manifestly covariant, Lorentz-invariant Lagrangian densities are constructed that yield the equation satisfied by an interacting (two-component) Sakata-Taketani spin-0 field. Six types of external field couplings are considered, two scalars, two vectors, an antisymmetric second-rank tensor, and a symmetric second-rank tensor, with the results specialized to electromagnetic interactions. For either of the two second-rank couplings, the equation is found to describe noncausal wave propagation, a property that is apparent from the dependence of the coefficients of the space derivatives on the external field; in contrast, the noncausality of the corresponding manifestly covariant Duffin-Kemmer-Petiau spin-0 equation is not so obvious. The possibilities for generalizing the results to higher spin theories involving only the essential 2(2J + 1) components for a particle with a definite spin J and mass m are discussed in considerable detail.

Guertin, R. F.↗
NASA NTRS1983

Finite element analysis of fluid-filled elastic piping systems

Two finite element procedures are described for predicting the dynamic response of general 3-D fluid-filled elastic piping systems. The first approach, a low frequency procedure, models each straight pipe or elbow as a sequence of beams. The contained fluid is modeled as a separate coincident sequence axial members (rods) which are tied to the pipe in the lateral direction. The model includes the pipe hoop strain correction to the fluid sound speed and the flexibility factor correction to the elbow flexibility. The second modeling approach, an intermediate frequency procedure, follows generally the original Zienkiewicz-Newton scheme for coupled fluid-structure problems except that the velocity potential is used as the fundamental fluid unknown to symmetrize the coefficient matrices. From comparisons of the beam model predictions to both experimental data and the 3-D model, the beam model is validated for frequencies up to about two-thirds of the lowest fluid-filled labor pipe mode. Accurate elbow flexibility factors are seen to be crucial for effective beam modeling of piping systems.

Everstine, G. C.↗
DOE OSTI2022

Phase-field modeling of radiation-induced segregation for multicomponent alloys

Structural alloys under irradiation are known to undergo radiation-induced solute redistribution (RIS) at grain boundaries, leading to detrimental effects such as intergranular corrosion and stress-assisted cracking. To better understand the phenomenon, improved models of RIS applicable to concentrated, multicomponent alloys, and mesoscale microstructures are needed. In this talk, we present a novel grand-potential-based phase-field model to account for the complete set of multicomponent kinetic and thermodynamic couplings between atoms and point defects in the Onsager transport equations. We demonstrate multiscale modeling capability by deriving the Onsager coefficient matrix from atomistic-based Kinetic Monte Carlo simulations. Model predictions and validations of RIS and the effect of defect production, grain boundary sink strength and density are demonstrated for a model FCC FeCrNi system. We also demonstrate the novel capability to describe RIS in the presence of equilibrium segregation described using a density-based CALPHAD thermodynamic framework. This modeling approach overcomes certain limitations in conventional RIS models and provides a step closer towards multiscale modeling.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2017

Ginzburg–Landau expansion in strongly disordered attractive Anderson–Hubbard model

We have studied disordering effects on the coefficients of Ginzburg–Landau expansion in powers of superconducting order parameter in the attractive Anderson–Hubbard model within the generalized DMFT+Σ approximation. We consider the wide region of attractive potentials U from the weak coupling region, where superconductivity is described by BCS model, to the strong coupling region, where the superconducting transition is related with Bose–Einstein condensation (ВЕС) of compact Cooper pairs formed at temperatures essentially larger than the temperature of superconducting transition, and a wide range of disorder—from weak to strong, where the system is in the vicinity of Anderson transition. In the case of semielliptic bare density of states, disorder’s influence upon the coefficients A and В of the square and the fourth power of the order parameter is universal for any value of electron correlation and is related only to the general disorder widening of the bare band (generalized Anderson theorem). Such universality is absent for the gradient term expansion coefficient C. In the usual theory of “dirty” superconductors, the С coefficient drops with the growth of disorder. In the limit of strong disorder in BCS limit, the coefficient С is very sensitive to the effects of Anderson localization, which lead to its further drop with disorder growth up to the region of the Anderson insulator. In the region of BCS–ВЕС crossover and in ВЕС limit, the coefficient С and all related physical properties are weakly dependent on disorder. In particular, this leads to relatively weak disorder dependence of both penetration depth and coherence lengths, as well as of related slope of the upper critical magnetic field at superconducting transition, in the region of very strong coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1985

Solid-state spectral transmissometer and radiometer

An in situ instrument designed to measure the spectral attenuation coefficient of seawater and the ocean remote-sensing reflectance from 400 to 750 nm is in the test and development stage. It employs a 256 channel, charge-coupled type of linear array measuring the spectral intensities diffracted by a grating. Examples of the types of data delivered by this instrument have been simulated using a breadboard laboratory instrument and an above-water, solid-state radiometer. Algorithms developed using data from these instruments provide measures of chlorophyll a plus phaeophytin a concentrations from less than 0.1 to 77.0 mg/cu m, gelbstoff spectral absorption coefficients, and detrital spectral backscattering coefficients for waters of the west Florida shelf.

Carder, K. L.↗
DOE OSTI2019

IAEA Coordinated Research Project on HTGR Physics, Thermal Hydraulics, and Depletion Uncertainty Analysis: PHISICS/RELAP5-3D Results for the Phase III Coupled Core Exercises

This report details the Parallel and Highly Innovative Simulation for INL Code System (PHISICS)/Reactor Excursions and Leak Analysis Program (RELAP5)-3D results obtained for the neutronics stand-alone core exercises defined for Phase II of the International Atomic Energy Agency (IAEA) Coordinated Research Project (CRP) on high-temperature gas cooled reactor (HTGR) uncertainty analysis in modeling (UAM). The Phase II models and results are linked to the earlier Standardized Computer Analyses for Licensing Evaluation (SCALE)/Sampler/New ESC-based Weighting Transport (NEWT) data generated for the lattice physics (lattice) stage Phase I of the CRP. The focus of this report is the propagation of cross-section uncertainties from the lattice to the core calculation (core) phase of the prismatic 350 megawatt (MW) General Atomics (GA) Modular HTGR (MHTGR). The Phase II neutronics exercises consist of two sub-cases (II-2a and II-2b) specified for the fresh and mixed core loading of the MHTGR-350 prismatic high-temperature reactor design. Exercises II-2a and II-2b are performed without temperature feedback using isothermal temperature profiles. For the nominal lattice physics (i.e., best-estimate) model, a series of fresh and depleted single block and super cell SCALE/KENO and SCALE/NEWT models were developed at Idaho National Laboratory (INL) to assess the impact of spectral effects on the few-group cross sections. A combination of these lattice cells were used in a super cell calculation to construct 8-group cross-section libraries for use in the INL-developed PHISICS/RELAP5-3D code suite. The block-level homogenized libraries were assigned to the 220 fuel zones utilized in the MHTGR-350 PHISICS core model, according to the fresh and mixed fresh/depleted core loading pattern. In order to evaluate the effect of uncertainty propagation, several sets consisting of 1,000 perturbed NEWT lattice and PHISICS/RELAP5-3D core calculations were performed using the SCALE 6.2 ENDF/B-VII.1 cross-section co-variance data and the stochastic sampling module Sampler in SCALE 6.2.0. The Figures of Merit (FOM) investigated include the mean and standard deviation uncertainty values obtained for the eigenvalues, control rod worth values, block-averaged power profiles, power axial offsets, and isothermal temperature feedback coefficients. A sensitivity study on the main nuclide reaction contributors to the FOM uncertainties has not yet been performed since the SCALE/PHISICS/RAVEN coupling with ENDF/B-VII co-variance data is still being developed. It was found that uncertainties in the cross sections lead to uncertainties in the local power values of up to 1.5%. The variances between the fresh and mixed/depleted core models are not as large as the axial variations between the top and bottom within each core model. The core eigenvalue uncertainty is approximately 0.5%, which is significant in comparison to typical eigenvalue difference targets (less than ~0.1% for LWRs). The power peaking and axial offset uncertainties are smaller (0.10% – 0.15%) and probably below the level of significance in typical core design metrics. The use of an 8-group energy structure slightly under-estimates some of the uncertainties, but in absolute terms, the uncertainty results are reasonably close to the 26-group results. The 26- and 8-group mean and nominal results differ by a larger degree, and if it can be afforded in terms of calculation resources, the 26-group structure should be used for HTGR calculations. The 8-group structure can, however, still be useful for reasonably accurate uncertainty assessments of transient cases where computational time is important. It was furthermore found that the use of a super cell during the cross-section generation process for better representation of the spectral environment at the core periphery did not lead to significant changes in the core eigenvalues, axial offset, and power peaking uncertainties. The impact of the super cell cross sections on the nominal and mean eigenvalues is, however, important enough (0.6% – 1.1% lower) to justify the use of these super cells for HTGR core simulation to represent the softer spectral environment in the core peripheral regions for nominal best-estimate calculations. The use of super cells for HTGR uncertainty studies is, therefore, not strictly necessary, but the improvements in nominal results could justify their use.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Non-perturbative quarkonium dissociation rates in strongly coupled quark-gluon plasma

Heavy quarks and quarkonia are versatile probes of the transport properties of the hot QCD medium produced in ultra-relativistic heavy-ion collisions (URHICs). A robust description of heavy-flavor transport coefficients requires a microscopic approach that treats the open and hidden heavy-flavor sectors on the same footing. Here, we employ the quantum many-body T -matrix formalism to evaluate the dissociation rates of heavy quarkonia in the quark-gluon plasma (QGP). The basic ingredient is the heavy-light T -matrix, which utilizes a nonperturbative driving kernel constrained by lattice-QCD data. Its resummation in a ladder series provides a much enhanced interaction strength compared to a previously used perturbative coupling to the quasiparticle partons in the QGP. The in-medium quarkonium properties, particularly their temperature-dependent binding energies, are obtained from selfconsistent calculations with the same interaction kernel, including interference effects (also referred to as the imaginary part of the heavy-quark potential) as well as off-shell parton spectral functions. We systematically investigate the interplay of these effects and elaborate on the connections to the dipole approximation used in effective field theory.

effective field theories of QCD↗
DOE OSTI2017

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al 0.3 CoCrFeNi high entropy alloy

A successful demonstration of applying integrated strengthening using Hall-Petch strengthening (grains size effect) and precipitation strengthening is shown in the fcc based high entropy alloy (HEA) Al0.3CoCrFeNi, leading to quantitative determinations of the Hall-Petch coefficients for both hardness and tensile yield strength, aswell as the enhancements in the yield strength fromtwo distinct types of ordered precipitates, L12 and B2. An excellent combination of yield strength (~490MPa), ultimate tensile strength (~850MPa), and ductility (~45% elongation) was achieved by optimizing and coupling both strengtheningmechanisms, resulting from a refined grain size as well as both L12 and B2 ordered precipitates. This opens up new avenues for the future development of HEAs, with the appropriate balance of properties required for engineering applications.

Gwalani, B.↗