Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Correlation between microstructure and residual stress formation in friction stir welded armor steels characterized by neutron diffraction

Friction stir welding (FSW) is a solid-state joining process that minimizes the heat-affected zone (HAZ) compared with fusion-based arc welding, making it well suited for joining martensitic armor steels where hardness and ballistic resistance are critical. This study investigates residual stress formation in three defect-free FSW butt-joint configurations relevant to armored-vehicle fabrication: similar rolled homogeneous armor (RHA–RHA, Case 1), similar high-hardness armor (HHA–HHA, Case 2), and dissimilar HHA–RHA (Case 3) joints produced under temperature-controlled conditions (770 °C). Neutron diffraction was employed to quantify the magnitude and spatial distribution of residual stresses in the longitudinal, transverse, and normal directions and to correlate them with weld microstructure and hardness. Tensile residual stresses were concentrated in the softened HAZ, reaching approximately 300 MPa for Case 2 and 400 MPa for Case 1 (≈50–70 % of the base-metal yield strength; ∼581 MPa for RHA and ∼566 MPa for HHA), while compressive residual stresses dominated the stir zone. The spatial extent of tensile stresses scaled with the width of the softened HAZ, which was largest in the dissimilar HHA–RHA joint and smallest in the HHA–HHA joint. Full-width-at-half-maximum (FWHM) analysis revealed low microstrain in overtempered HAZ regions and high microstrain in the stir zone associated with severe plastic deformation and fresh martensite formation. This work demonstrates that residual stress evolution in FSW of martensitic armor steels is governed not primarily by peak temperature or thermal contraction, as inferred from fusion-welding analogies, but by the competition between transformation-induced volumetric expansion and tempering-induced stress relaxation. The relative dominance of these mechanisms is shown to depend on alloy hardenability and local thermal history, leading to more extensive HAZ softening and broader tensile stress regions in the lower-hardenability RHA steel. These findings establish a transferable mechanistic framework for optimizing solid-state joining strategies in high-strength steels and other transformation-hardening alloys beyond armor applications.

Friction stir welding↗
DOE OSTI2020

Nickel(II) Metal Complexes as Optically Addressable Qubit Candidates

The inherent atomic level structural control of synthetic chemistry enables the creation of qubits, the base units of a quantum information science system, designed for a target application. For quantum sensing applications, enabling optical read-out of spin in tunable molecular systems, akin to defect-based systems, would be transformative. This approach would bring together molecular tunability with optical read-out technology. In theory, nickel ions in octahedral symmetry meet all the criteria for optical readout of spin. Yet, to the best of our knowledge, there are no pulse EPR studies on Ni 2+ molecules. We identified two compounds featuring highly symmetric Ni 2+ centers, thereby engendering weak zero-field splitting to enable EPR addressability:[Ni(phen) 3 ](BF 4 ) 2 (1) and [Ni(pyr 3 ) 2 ](BF 4 ) 2 (2) (phen = 1,10-phenanthroline; pyr 3 = tris-2-pyridyl-methane). Crucially, these complexes feature the requisite strong field ligands to enable emission for optical addressability. We extracted axial zero-field splitting parameters of D = +0.9 cm –1 and +2.7 cm –1 for 1 and 2, respectively, enabling pulse EPR measurements. Both compounds produce emission at λ max = 938–944 nm. Furthermore, the aggregate of these results expands the catalogue of qubit materials to Ni 2+ -based compounds and offers a future pathway for optical readout of these molecules.

36 MATERIALS SCIENCE↗
DOE OSTI2022

MAVS mediates a protective immune response in the brain to Rift Valley fever virus

Rift Valley fever virus (RVFV) is a highly pathogenic mosquito-borne virus capable of causing hepatitis, encephalitis, blindness, hemorrhagic syndrome, and death in humans and livestock. Upon aerosol infection with RVFV, the brain is a major site of viral replication and tissue damage, yet pathogenesis in this organ has been understudied. Here, we investigated the immune response in the brain of RVFV infected mice. In response to infection, microglia initiated robust transcriptional upregulation of antiviral immune genes, as well as increased levels of activation markers and cytokine secretion that is dependent on mitochondrial antiviral-signaling protein (MAVS) and independent of toll-like receptors 3 and 7. In vivo , Mavs -/- mice displayed enhanced susceptibility to RVFV as determined by increased brain viral burden and higher mortality. Single-cell RNA sequence analysis identified defects in type I interferon and interferon responsive gene expression within microglia in Mavs -/- mice, as well as dysregulated lymphocyte infiltration. The results of this study provide a crucial step towards understanding the precise molecular mechanisms by which RVFV infection is controlled in the brain and will help inform the development of vaccines and antiviral therapies that are effective in preventing encephalitis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Exploring and Embracing Heterogeneity in Atomically Thin Energy Materials

Atomically thin semiconductors offer extraordinary opportunities for the manipulation of charge carriers, many-body optical excitations, quantum light emitters, and non-charge based quantum numbers. Confinement and reduced dielectric screening in these two-dimensional (2D) materials give rise to large characteristic energies so that many-body and quantum effects are important even at room temperature. Optical excitations in extended homogeneous areas have been investigated intensely, albeit mostly focusing on a limited set of materials, particularly transition metal dichalcogenides. Much less understood are light-matter interactions for other classes of 2D semiconductors, as well as effects that arise in heterogeneous materials, either near naturally occurring defects, impurities, edges and grain boundaries, or as a result of intentional interface formation in heterostructures. Addressing such systems experimentally involves significant challenges: Understanding the atomistic growth mechanisms of 2D semiconductors, so that novel systems with designed properties, specific ‘imperfections’, or controlled interfaces can be realized; and probing of local excitations at scales that match the relevant (micrometer to nanometer) length scales in heterogeneous materials. In this research project, we addressed these challenges by harnessing quantitative in-situ microscopy to study the growth of 2D and layered semiconductors and heterostructures, combined with local spectroscopic measurements of quasiparticles excited at the nanometer scale. An integral part of the research has been the development of novel experimental approaches, both for in-situ microscopy of synthesis and for nanometer-scale spectroscopy. In particular, advanced techniques were developed for cathodoluminescence in scanning transmission electron microscopy (STEM-CL) where a nanometer-focused electron beam is used to locally excite electron-hole pairs, excitons, as well as propagating hybrid light-matter modes such as exciton-polaritons. Experiments were guided and analyzed via computations of structure, chemistry, and excitation spectra. The particular materials focus has been on group IV chalcogenides, a family of less explored 2D/layered semiconductors whose diversity in crystal structure and properties promises access to novel materials architectures and the discovery of phenomena that can support emerging technology needs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomic Layer Deposition of Nanolayered Carbon Films

In this paper, carbon thin films were grown using the plasma-enhanced atomic layer deposition (PE-ALD). Methane (CH4) was used as the carbon precursor to grow the carbon thin film. The grown film was analyzed by the high-resolution transmission electron micrograph (TEM), X-ray photoelectron spectroscopy (XPS) analysis, and Raman spectrum analysis. The analyses show that the PE-ALD-grown carbon film has an amorphous structure. It was found that the existence of defective sites (nanoscale holes or cracks) on the substrate of copper foil could facilitate the formation of nanolayered carbon films. The mechanism for the formation of nanolayered carbon film in the nanoscale holes was discussed. This finding could be used for the controlled growth of nanolayered carbon films or other two-dimensional nanomaterials while combining with modern nanopatterning techniques.

Xiao, Zhigang (ORCID:0000000215950565)↗
DOE OSTI2020

Scaling Laws of Exciton Recombination Kinetics in Low Dimensional Halide Perovskite Nanostructures

Carrier recombination is a crucial process governing the optical properties of a semiconductor. Although various theoretical approaches have been utilized to describe carrier behaviors, a quantitative understanding of the impact of defects and interfaces in low dimensional semiconductor systems is still elusive. Here, we develop a model system consisting of chemically tunable, highly luminescent halide perovskite nanocrystals to illustrate the role of carrier diffusion and material dimensionality on the carrier recombination kinetics and luminescence efficiency. Our advanced synthetic methods provide a well-controlled colloidal system consisting of nanocrystals with different aspect ratios, halide compositions, and surface conditions. Using this system, we reveal the scaling laws of photoluminescence quantum yield and radiative lifetime with respect to the aspect ratio of nanocrystals. The scaling laws derived herein are not only a phenomenological observation but proved a powerful tool disentangling the carrier dynamics of microscopic systems in a quantitative and interpretable manner. The investigation of our model system and theoretical formulation bring to light the dimensionality, as a hidden constraint on carrier dynamics, and identify the diffusion length as an important parameter that distinguishes nanoscale and macroscale carrier behaviors. Furthermore, the conceptual distinction in carrier dynamics in different dimensionality regimes informs new design rules for optical devices where complex microstructures are involved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Doping of Cr in Graphene Using Electron Beam Manipulation for Functional Defect Engineering

Chromium atoms in graphene have been proposed to exhibit magnetic moments and spin-selective conducting states depending on the local bonding geometry within the graphene structure, which could lead to interesting applications in spintronics. Despite this interest, there are few direct experimental reports of Cr dopants in graphene even though it is theorized to be stable. Here, we demonstrate the introduction of single Cr dopant atoms into the graphene lattice and onto graphene edges through the controlled use of a focused electron beam in a scanning transmission electron microscope. Here, we show local control of doping locations, and when coupled with targeted in situ milling during scanning of the e-beam, these strategies demonstrate an important component of the fabrication of tailored nanostructured devices in the electron microscope. The approach is validated with first-principles calculations to understand synthesis pathways during fabrication and reveal the energetics and local properties of Cr atoms embedded in graphene; for example, Cr doping can convert graphene into a magnetic and semiconducting material, which suggests Cr-doped graphene can be used as a building block for potential electronic devices and a means to construct them.

36 MATERIALS SCIENCE↗
DOE OSTI2022

EMC3 regulates mesenchymal cell survival via control of the mitotic spindle assembly

Eukaryotic cells transit through the cell cycle to produce two daughter cells. Dysregulation of the cell cycle leads to cell death or tumorigenesis. Herein, we found a subunit of the ER membrane complex, EMC3, as a key regulator of cell cycle. Conditional deletion of Emc3 in mouse embryonic mesoderm led to reduced size and patterning defects of multiple organs. Emc3 deficiency impaired cell proliferation, causing spindle assembly defects, chromosome mis-segregation, cell cycle arrest at G2/M, and apoptosis. Upon entry into mitosis, mesenchymal cells upregulate EMC3 protein levels and localize EMC3 to the mitotic centrosomes. Further analysis indicated that EMC3 works together with VCP to tightly regulate the levels and activity of Aurora A, an essential factor for centrosome function and mitotic spindle assembly: while overexpression of EMC3 or VCP degraded Aurora A, their loss led to increased Aurora A stability but reduced Aurora A phosphorylation in mitosis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Self‐Strain Suppression of the Metal‐to‐Insulator Transition in Phase‐Change Oxide Devices

Strongly correlated materials exhibiting phase transitions which can be controlled through external stimuli, such as electric fields, are promising for future computing technologies beyond conventional semiconductor transistors. Devices that take advantage of structural phase transitions have inherent built‐in memory, reminiscent of synapses and neurons, and are thus natural candidates for neuromorphic computing. Of particular interest are phase‐change oxides, which allow for control over the metal‐to‐insulator transition. Here, X‐ray nano‐diffraction structural imaging of micro‐devices fabricated with the archetypal phase‐change material vanadium sesquioxide (V 2 O 3 ) is reported. The devices contain a Ga ion‐irradiated region where the metal‐to‐insulator transition critical temperature is lowered, a useful feature for controlling neuron‐like spiking behavior. Results show that strain, induced by crystal lattice mismatch between the pristine and irradiated material, leads to a suppression of the metal‐to‐insulator‐transition. Suppression occurs within the irradiated region or along its edges, depending on the defect‐distribution and the size of the region. The observed self‐straining effect can extend to other phase‐change oxides and dominate as device dimensions are reduced and become too small to dissipate strain within the irradiated region. The findings are important for phase engineering in phase‐change devices and highlight the necessity to study phase transitions at the nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Dynamic Behavior of Platinum Atoms and Clusters in the Native Oxide Layer of Aluminum Nanocrystals

Strong metal–support interactions (SMSIs) are well-known in the field of heterogeneous catalysis to induce the encapsulation of platinum (Pt) group metals by oxide supports through high temperature H 2 reduction. However, demonstrations of SMSI overlayers have largely been limited to reducible oxides, such as TiO 2 and Nb 2 O 5 . In this report we show that the amorphous native surface oxide of plasmonic aluminum nanocrystals (AlNCs) exhibits SMSI-induced encapsulation of Pt following reduction in H 2 in a Pt structure dependent manner. Reductive treatment in H 2 at 300 °C induces the formation of an AlO x SMSI overlayer on Pt clusters, leaving Pt single-atom sites (Ptiso) exposed available for catalysis. The remaining exposed Pt iso species possess a more uniform local coordination environment than has been observed on other forms of Al 2 O 3 , suggesting that the AlO x native oxide of AlNCs presents well-defined anchoring sites for individual Pt atoms. This observation extends our understanding of SMSIs by providing evidence that H 2 -induced encapsulation can occur for a wider variety of materials and should stimulate expanded studies of this effect to include nonreducible oxides with oxygen defects and the presence of disorder. It also suggests that the single-atom sites created in this manner, when combined with the plasmonic properties of the Al nanocrystal core, may allow for site-specific single-atom plasmonic photocatalysis, providing dynamic control over the light-driven reactivity in these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Grain boundary structure of two-dimensional tellurium revealed by 4D STEM

The recent realization of 2D tellurium (tellurene) has allowed scientists to demonstrate an air-stable monoelemental van der Waals material with remarkable potential for applications in electronics and optoelectronics. The chiral-chain structure of ultrathin Te allows controllable electronic and optical properties due to the non-monotonic carrier mobility and an increase in electronic band-gap as the thickness is reduced. Scalable and accurate production of 2D Te-based functional devices will require detailed knowledge of structural defects and strain field distributions that can be linked to transport properties.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Probing Dynamic Phase Changes in Electrochemical Systems with Cryogenic and in Situ Analytical Electron Microscopy (Final Technical Report)

In this project, we focus on the advancement of our newly developed, unique in situ and cryogenic analytical electron microscopy (AEM) techniques and the development of additional high-end capabilities to quantitatively elucidate the mechanisms of resistive state changes in solid-state electrochemical materials for non-volatile, neuromorphic memory. The objectives of the proposed research are (1) to characterize and elucidate the mechanisms by which electronic state changes occur in various solid-state devices to build guiding principles for electrochemically activated smart materials; (2) to advance our understanding of such mechanisms by coupling cryogenic and in situ techniques to control kinetics of the observed mechanisms while mitigating probe-induced damage; and (3) to utilize additional advanced techniques including electron-beam induced current and quantum mechanical simulations in order to identify the underlying fundamental science of such processes, including roles of defect formation and its effect on phase nucleation, as well as dynamics of these processes in the electrochemical systems at the nanometer scale.

25 ENERGY STORAGE↗
DOE OSTI2021

A hybrid coupler for directing quantum light emission with high radiative Purcell enhancement to a dielectric metasurface lens

Quantum photonic technologies such as quantum sensing, metrology, and simulation could be transformatively enabled by the availability of integrated single photon sources with high radiative rates and photon collection efficiencies. We address these challenges for quantum emitters formed from color center defect sites such as those in hexagonal boron nitride, which are promising candidates as single photon sources due to their bright, stable, polarized, and room temperature emission. We report design of a nanophotonic coupler from color center quantum emitters to a dielectric metasurface lens. The coupler is comprised of a hybrid plasmonic–dielectric resonator that achieves a large radiative Purcell enhancement and partial control of far-field radiation. We report radiative Purcell factors up to 285 and photon collection efficiencies up to 89% for a lossless metasurface, applying a continuous hyperboloidal phase-front. Our hybrid plasmonic–dielectric coupler interfacing two nanophotonic elements is a compound optical element, analogous to those found in microscope objective lenses, which combine multiple optical functions into a single component for improved performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L

In this experiment, the origin of dislocation structures in AM stainless steels was systematically investigated by controlling the effect of thermal stress through geometric constraints for the first time. Stainless steel 316L parts were produced in the form of “1D” rods, “2D” walls, and "3D" rectangular prisms to evaluate the effect of constraints to thermal expansion/shrinkage on the development of defect microstructures and to elucidate the origin of additively manufactured (AM) dislocation microstructures. Dislocation density, organization, chemical micro-segregation, precipitate structures, and misorientations were analyzed as a function of increasing constraints around solidifying material in 1D, 2D, and 3D components built using both directed energy deposition (DED) and powder-bed selective laser melting (SLM). In DED parts, the dislocation density was not dependent on local misorientations or micro-segregation patterns, but evolved from approximately ρ ⊥ = 10 12 m -2 in 1D parts to ρ ⊥ = 10 14 m -2 in 3D parts, indicating that it is primarily thermal distortions that produce AM dislocation structures. In DED 3D parts and SLM parts, dislocation densities were highest (ρ ⊥ ≈ 10 14 m -2 ) and corresponded to the formation of dislocation cells approximately 300-450 nm in diameter. Dislocation cells overlapped with dendrite micro-segregation in some but not all cases. The results illustrate that dendritic micro-segregation, precipitates, or local misorientations influence how the dislocations organize during processing, but are not responsible for producing the organized cell structures. Furthermore, this work shows that AM dislocation structures originate due to thermal distortions during printing, which are primarily dictated by constraints surrounding the melt pool and thermal cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A crucial role for dynamic expression of components encoding the negative arm of the circadian clock

In the Neurospora circadian system, the White Collar Complex (WCC) drives expression of the principal circadian negative arm component frequency ( frq ). FRQ interacts with FRH (FRQ-interacting RNA helicase) and CKI, forming a stable complex that represses its own expression by inhibiting WCC. In this study, a genetic screen identified a gene, designated as brd-8 , that encodes a conserved auxiliary subunit of the NuA4 histone acetylation complex. Loss of brd-8 reduces H4 acetylation and RNA polymerase (Pol) II occupancy at frq and other known circadian genes, and leads to a long circadian period, delayed phase, and defective overt circadian output at some temperatures. In addition to strongly associating with the NuA4 histone acetyltransferase complex, BRD-8 is also found complexed with the transcription elongation regulator BYE-1. Expression of brd-8, bye-1, histone h2a.z , and several NuA4 subunits is controlled by the circadian clock, indicating that the molecular clock both regulates the basic chromatin status and is regulated by changes in chromatin. Taken together, our data identify auxiliary elements of the fungal NuA4 complex having homology to mammalian components, which along with conventional NuA4 subunits, are required for timely and dynamic frq expression and thereby a normal and persistent circadian rhythm.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Influence of surface chemistry on Li nucleation energetics on graphene-based surfaces

Lithium metal is a promising high-capacity anode material for solid-state batteries, but it typically suffers from poor cyclability. Carbon scaffold hosts have the potential to improve this performance due to their high electronic conductivity and large surface area, which facilitates lithium-ion adsorption and desorption. Scaffold surface chemistry is known to significantly influence performance outcomes, but the details of these interactions are not fully understood. Here, this study employs first-principles simulations to explore lithium transport and nucleation on graphene anodes with various surface chemistries. Using enhanced sampling techniques, ab initio molecular dynamics, and density functional theory calculations, we find that although surface chemistry has a minimal impact on lithium interfacial transport, it influences surface nucleation significantly. Both heteroatom dopants and intrinsic defects lower the nucleation barrier, creating a more favorable environment for lithium nucleation compared to pristine graphene. In addition, our results reveal a complex interplay between surface lithium concentration, lithium transport, and nucleation kinetics. These findings highlight the potential of surface modifications to precisely control nucleation processes on carbon-based anodes and provide design guidance for reducing dendrite formation and improving the cycle life of solid-state batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Solvent Reorganization and Surface–Species Interactions Control Transfer Hydrogenation Rates in Sn-Beta Zeolites

Reorganization of confined alcohol networks reshapes adsorption and activation thermodynamics in Lewis acid zeolites, yet the roles of adsorbate sterics and non-H-bonding cosolvents remain unclear. Here, we investigate transfer hydrogenation of methyl- (mCH) and tert-butylcyclohexanone (tbCH) with 2-butanol over hydrophobic Sn-Beta. First-order rates per defect-open Sn site are 2–5× higher for mCH than tbCH, but converge in the zero-order regime (333–393 K), indicating that solvent reorganization entropically drives adsorption, while bond activation is insensitive to ketone structure. Reactions in toluene or acetonitrile (with 1 M 2-butanol) show that intraporous solvent organization governs transition-state stabilization: on hydrophobic Sn-Beta, apparent enthalpies and entropies rise with decreasing solvent polarity, whereas hydrophilic zeolites display nearly constant barriers across solvents. Liquid-phase IR spectroscopy corroborates these trends, showing that hydrophilic pores enforce 2-butanol-like solvation environments even in toluene. Together, these results reveal how zeolite pores regulate the intraporous solvent structure, whose reorganization upon adsorption reshapes the thermodynamic landscape of Lewis acid catalysis

Adsorption↗
DOE OSTI2023

Mechanochemistry-Induced Strong Metal–Support Interactions Construction toward Enhanced Hydrogenation

The construction of strong metal–support interactions (SMSIs) represented an attractive approach to producing supported noble metal nanocatalysts possessing enhanced stability by overlayer encapsulation. The development of facile approaches capable of achieving efficient, controllable, and extensive SMSI overlayer formation, particularly under neat and ambient conditions, is a long-standing challenge. In this work, a mechanochemistry-driven pathway was deployed for efficient and controllable SMSI construction under neat and ambient conditions to customize the capsulation degree and overlayer structures toward enhanced catalysis. The reducibility of the additives and the high interaction efficiency provided by the mechanochemical treatment could afford abundant active intermediates (e.g., Ti 3+ species and oxygen defects) within a short time to induce and tune the overlayer encapsulation. This facile approach could be extensively deployed to TiO2-derived nanocatalysts with diverse phases, diverse reducible metal oxides-involved systems, and different supported noble metal nanoparticles. Enhanced hydrogenation activity was achieved by the as-afforded nanocatalysts upon SMSI construction and further tuned by the encapsulation degree.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗