Search NASA⌕ Search

SEARCH · Search NASA

Results for “disk”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Influence of Annealing Temperature on the OER Activity of NiO(111) Nanosheets Prepared via Microwave and Solvothermal Synthesis Approaches

Earth-abundant transition metal oxides are promising alternatives to precious metal oxides as electrocatalysts for the oxygen evolution reaction (OER) and are intensively investigated for alkaline water electrolysis. OER electrocatalysis, like most other catalytic reactions, is surface-initiated, and the catalyst performance is fundamentally determined by the surface properties. Most transition metal oxide catalysts show OER activities that depend on the predominantly exposed crystal facets/surface structure. Therefore, the design of synthetic strategies to obtain the most active crystal facets is of significant research interest. In this work, rock salt NiO OER catalysts with (111) predominantly exposed facets were synthesized by a solvothermal (ST) method either heated under supercritical or microwave-assisted (MW) conditions. Particular emphasis was placed on the influence of the post annealing temperature on the structural configuration and OER activity to compare their catalytic performances. The as-prepared electrocatalysts are pure α-Ni hydroxides which were converted to rock salt NiO (111) nanosheets with hexagonal pores after heat treatment at different temperatures. The OER activity of the electrodes has been evaluated in 0.1 M KOH using geometric and intrinsic current densities via normalization by the disk area and BET area, respectively. The lowest overpotential at a geometric current density of 10 mA/cm 2 is found for samples pretreated by heating between 400 and 500 °C with a catalyst loading of 115 μg/cm 2 . Despite the very similar nature of the catalysts obtained from the two methods, the ST electrodes show a higher geometric and intrinsic current density for 500 °C pretreatment. The MW electrodes, however, achieve an optimal geometric current density for 400 °C pretreatment, while their intrinsic current density requires pretreatment over 600 °C. Interestingly, pretreated electrodes show consistently higher OER activity as compared to the poorly crystalline/less ordered hydroxide as-prepared electrocatalysts. Thus, our study highlights the importance of the synthesis method and pretreatment at an optimal temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Boosting the Oxygen Evolution Reaction by Tuning the Interfacial Iron Adsorption on Layered Double Hydroxide

Understanding the interaction between ions in the electrolyte and electrode materials plays an important role in optimizing the water electrolysis performance for hydrogen production. Herein, the synergistic effect of iron (Fe) in the electrolyte and interlayer anions within the layered structure on the oxygen evolution reaction (OER) has been investigated by combining material synthesis with controlled structure, multiple characterization techniques, and first-principles calculations. Nickel aluminum layered double hydroxides (NiAl-LDHs) with different interlayer anions (CO 3 2– , Cl – , and Br – ) show similar oxygen evolution activity in the absence of Fe species in the electrolyte. The addition of Fe into the electrolyte results in improved performance for all of the NiAl-LDHs, following the rank LDH-Br > LDH-Cl > LDH-CO 3 , under all of the conditions with varied concentration of Fe. X-ray absorption spectroscopy and identical location electron microscopy analyses show that the LDH structure remains unchanged after the OER activity test, while in situ stationary probe rotating disk electrode inductively coupled plasma mass spectrometry (SPRDE-ICP-MS) measurements show partial dissolution of the intercalating halide ions during cycling, with less dissolution for Br-intercalated materials. Insights from theoretical calculations demonstrate the thermodynamic preference of Br – to remain intercalated in the presence of Fe, while the stronger adsorption of Fe(OH) 3 species on the LDH-Br sample promotes the OER activity. In conclusion, these results provide mechanistic insights into the rational design of active layered materials with an enhanced OER performance for efficient water electrolysis.

58 GEOSCIENCES↗
DOE OSTI2020

Ultradense Arrays of Sub-100 nm Co/CoO Nanodisks for Spintronics Applications

Sub-100 nm ferromagnetic/antiferromagnetic nanodisks present enhanced magnetic properties with respect to their thin film counterparts. Co/CoO disks were fabricated over large areas by a transferring process of an anodic aluminum oxide membrane, electron beam evaporation of Co, and subsequent oxidation to CoO. This method reveals exchange bias fields up to 4 times larger than that in thin films and higher blocking temperatures for the same oxidation protocol. The significant improvement of the magnetic properties is attributed to finite-size effects in nanostructures and might be exploited in diverse areas such as the magnetic stabilization of ultradense arrays or the scalability process of patterned heterostructures in spintronic phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Critical Practices in Rigorously Assessing the Inherent Activity of Nanoparticle Electrocatalysts

Accurate activity measurements for electrocatalytic materials are the backbone of impactful electrocatalyst research. Inherent to accurate measurements is the correct accounting of the active catalyst sites and the design of experiments to ensure that these sites are participating in the measured reaction. Improvements in electrocatalyst activity for fuel cell reactions (hydrogen oxidation and oxygen reduction) are essential for the widespread adoption of this carbon-neutral energy source. Activities for these half-reactions can be reported in a variety of ways including specific activities, mass activities, volumetric activities, and half-wave potentials. These values are traditionally measured with a rotating disk electrode (RDE) in which the electrocatalyst is supported on a porous active layer film attached to the RDE. To accurately measure electrocatalyst activity with an RDE, two major sources of errors must be addressed: (i) accurate electrochemical surface area (ECSA) quantification and (ii) fast diffusion of reactants through the active layer film. In this contribution, we first aim to detail through RDE experiments and mass transport modeling the potential errors that can be observed when these factors are not properly addressed. We then present recommendations and discuss techniques for properly constructing electrocatalyst thin films and characterizing the ECSA on monometallic and novel alloy electrocatalysts. These practices, when adopted, ensure greater confidence and reliability in reports of electrocatalyst activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transition Metal Dichalcogenides as Effective Catalysts for High-Rate Lithium–Sulfur Batteries

In today’s renaissance of high energy density secondary batteries, lithium-sulfur (Li-S) batteries represent one of the most promising candidates for the next generation of renewable energy storage systems, due to sulfur’s high theoretical specific capacity of 1675 mAh g -1 and high earth abundance. However, despite decades of study, the issues associated with capacity fade via the polysulfide shuttle and sluggish kinetics remain. Through a rigorous and detailed electrochemical study of lithium polysulfides via rotating disk electrode voltammetry (RDE), we have investigated the kinetics of the redox reactions, and explored candidate catalysts to potentially overcome/mitigate the polysulfide shuttle effect. From these RDE studies, supported by comprehensive electronic-structure calculations of conversion-type surface reactions, we determined that WSe 2 can effectively catalyze the polysulfide redox reaction, though further studies are necessary to improve overall Li-S battery performance.

25 ENERGY STORAGE↗
DOE OSTI2025

Quantification of Reactive Oxygen Species Produced from Electrocatalytic Materials

Oxygen electrochemistry goes beyond O 2 , as the formation of reactive oxygen species (ROS) such as H 2 O 2 and O 3 during water oxidation is key in the destruction of persistent pollutants in water remediation technologies as well as in the degradation of fuel cell and electrolyzer components. In this study, we developed an in situ method utilizing the rotating ring-disk electrode technique to quantify the formation of O 2 , O 3 , and H 2 O 2 species across a broad pH range (1–8.3). Oxygen selectivity trends over Pt, IrO 2 , and PbO 2 surfaces reveal that even O 2 evolution catalysts may produce small yet measurable amounts of ROS, further modulated by pH and electrode potential. In conclusion, these findings emphasize the need to probe the selectivity of oxygen electrochemistry for a more complete picture of advanced materials for electrochemical technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Electrochemical Corrosion and Catalysis Dynamics of Tin Oxide during Water Oxidation

Metal oxide corrosion severely limits anodic electrocatalysis, particularly at high potentials in acidic environments, where degradation pathways remain poorly defined. This study establishes explicit connections between corrosion and electrocatalysis on tin oxide during water oxidation by examining the roles of lattice defects, reactive oxygen species, interfacial pH variations, and speciation of corroded tin in acid. We first demonstrate the presence of structural defects such as oxygen vacancies and substoichiometric Sn(II) species by integrating electron paramagnetic resonance spectroscopy, ultraviolet photoelectron spectroscopy, and Mott–Schottky analysis. Kohn–Sham density functional theory calculations reveal that explicit water structures thermodynamically stabilize reaction intermediates and lower reaction overpotentials. Moreover, we propose that water dissociation leads to hydrogen-bonding networks formed by H* and OH* intermediates, which may span the entire catalyst surface and decrease the interfacial pH to drive corrosion. In contrast, the electrochemical generation of reactive oxygen species is shown to play a minor role in catalyst corrosion during water oxidation using inductively coupled plasma mass spectrometry coupled with selective chemical scavengers. Square-wave voltammetry combined with rotating ring-disk electrodes is used to reveal that under open-circuit conditions, only Sn(IV) cations chemically dissolve from tin oxide, while both Sn(IV) and Sn(II) species electrochemically corrode during water oxidation. Our results unveil a dynamic and complicated interplay between corrosive and catalytic pathways on metal oxide electrocatalysts: a decrease in interfacial pH due to water oxidation exacerbates Sn(II)/Sn(IV) corrosion. Subsequently, the electrochemical corrosion of Sn(II)/Sn(IV) facilitates product formation from lattice oxygen, while the redeposition of corroded Sn(II) as Sn(IV) can enable oxygen exchange with water. By elucidating the roles of defects and interfacial chemistry, this work provides a roadmap for engineering improved electrocatalysts that balance activity and stability, a critical step toward scalable and durable energy technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Translating Fundamental Insights into Ag-Based Bimetallic Electrocatalysts to Anion-Exchange Membrane Fuel Cells

To address challenges of high costs and scalability for fuel cells, it is essential to develop af-fordable and earth-abundant materials that are Pt-group-metal (PGM)-free. Recent advance-ments in PGM-free electrocatalysis for the oxygen reduction reaction (ORR) in alkaline media show that high catalyst loadings are needed to achieve high reaction rates; however, there are associated mass transport limitations. To address this issue, we develop low-loading ionomer-less Ag-bimetallic thin films by alloying with 3d block elements or Sn. We bridge knowledge from fundamental rotating disk electrode (RDE) studies to gas-diffusion cathodes in high-temperature anion-exchange membrane fuel cells (HT-AEMFCs), resulting in high-activity ORR catalysis and peak power densities up to 1.2 W cm-² geo for the Ag-Sn and Ag-Co alloys. Here, experimental post-characterization and theoretical calculations reveal small Co or Sn oxide nano-islands on Ag as likely active sites enhancing ORR activity, ultimately offering these low-loading PGM-free ORR materials as a viable path towards sustainable energy conversion.

Catalysts↗
DOE OSTI2023

Macroscale Superlubricity Induced by MXene/MoS 2 Nanocomposites on Rough Steel Surfaces under High Contact Stresses

Toward the goal of achieving superlubricity, or near-zero friction, in industrially relevant material systems, solution-processed multilayer Ti 3 C 2 T x -MoS 2 blends are spray-coated onto rough 52100-grade steel surfaces as a solid lubricant. The tribological performance was assessed in a ball-on-disk configuration in a unidirectional sliding mode. The test results indicate that Ti 3 C 2 T x -MoS 2 nanocomposites led to superlubricious states, which has hitherto been unreported for both individual pristine materials, MoS 2 and Ti 3 C 2 T x , under macroscale sliding conditions, indicating a synergistic mechanism enabling the superlative performance. Furthermore, the processing, structure, and property correlation were studied to understand the underlying phenomena. Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy revealed the formation of an in situ robust tribolayer that was responsible for the performance at high contact pressures (>1.1 GPa) and sliding speeds (0.1 m/s). This report presents the lowest friction obtained by either MoS 2 or MXene or any combination of the two so far.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Nonadditive Interactions Unlock Small-Particle Mobility in Binary Colloidal Monolayers

We examine the organization and dynamics of binary colloidal monolayers composed of micron-scale silica particles interspersed with smaller-diameter silica particles that serve as minority component impurities. These binary monolayers are prepared at the surface of ionic liquid droplets over a range of size ratios (σ = 0.16–0.66) and are studied with low-dose minimally perturbative scanning electron microscopy (SEM). The high resolution of SEM imaging provides direct tracking of all particle coordinates over time, enabling a complete description of the microscopic state. In these bidisperse size mixtures, particle interactions are nonadditive because interfacial pinning to the droplet surface causes the equators of differently sized particles to lie in separate planes. By varying the size ratio, we control the extent of nonadditivity in order to achieve phase behavior inaccessible to additive 2D systems. Across the range of size ratios, we tune the system from a mobile small-particle phase (σ < 0.24) to an interstitial solid (0.24 < σ < 0.33) and furthermore to a disordered glass (σ > 0.33). These distinct phase regimes are classified through measurements of hexagonal ordering of the large-particle host lattice and the lattice’s capacity for small-particle transport. Altogether, we explain these structural and dynamic trends by considering the combined influence of interparticle interactions and the colloidal packing geometry. Our measurements are reproduced in molecular dynamics simulations of 2D nonadditive disks, suggesting an efficient method for describing confined systems with reduced dimensionality representations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural Characterization of the Platinum Nanoparticle Hydrogen-Evolving Catalyst Assembled on Photosystem I by Light-Driven Chemistry

Directed assembly of abiotic catalysts onto biological redox protein frameworks is of interest as an approach for the synthesis of biohybrid catalysts that combine features of both synthetic and biological materials. In this report, we provide a multiscale characterization of the platinum nanoparticle (NP) hydrogen-evolving catalysts that are assembled by light-driven reductive precipitation of platinum from an aqueous salt solution onto the photosystem I protein (PSI), isolated from cyanobacteria as trimeric PSI. The resulting PSI-NP assemblies were analyzed using a combination of X-ray energy-dispersive spectroscopy (XEDS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), small-angle X-ray scattering (SAXS), and high-energy X-ray scattering with atomic pair distribution function (PDF) analyses. The results show that the PSI-supported NPs are approximately 1.8 nm diameter disk-shaped particles that assemble at discrete sites with 145 Å separation. This separation is too large to be consistent with NP nucleation and growth at a site adjacent to the F B cofactor site. Instead, we suggest a mechanism for NP growth at hydrophobic sites on the PSI stromal surface. The NPs photoreductively assembled on the PSI stromal surface are found to be analogous to the nanostructures produced by successive cycles of atomic layer deposition (ALD) of platinum onto 40 nm porous anodic alumina oxide supports, although the mechanisms for nucleation appear to differ. In conclusion, this work establishes a foundation for the investigation of the reductive assembly of abiotic metal catalysts at sites connected to photochemically reducing equivalent production in PSI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoporous Fe 2 O 3 and Soluble Fe(II) Intermediates Accelerate the Electrodeposition of Fe in NaOH(aq)

Electrochemical conversion of iron oxide to iron metal can enable low-cost batteries for long duration energy storage and zero-emissions ironmaking for steel. Iron oxides, such as hematite, can be electrochemically reduced to metallic iron in concentrated alkaline electrolytes at modest temperatures, but the relative influences of solid-state and dissolved intermediates at practical reaction rates remains unclear. Here, in this study, we prepare a homologous set of well-defined hematite particles to measure how the nanoscale morphology of oxides controls both their reactivity and apparent reduction mechanism in concentrated hydroxide. Correlated electron microscopy and rotating-ring-disk-electrode measurements revealed that nanoporous hematite and solid intermediates formed iron via a dissolution-redeposition pathway. In contrast, dense hematite particles directly formed iron metal via reactive fracture. While previous studies on iron electrowinning have primarily emphasized the role of particle diameter at the micron scale, these results demonstrate the importance of the dissolution-redeposition pathway to support rapid reaction rates and suggest that nanoscale porosity controls iron oxide reactivity at temperatures <100 °C. Therefore, iron-oxide-to-metal electrolyzers and fast-charging iron-air batteries supported by curtailed electricity can increase the rate of metal formation by accelerating fracture and dissolution in reactant oxides.

TEM↗
DOE OSTI2019

Sustainable Urban Mining of Critical Elements from Magnet and Electronic Wastes

Here, we created a straightforward and environment-friendly process for acid-free leaching of rare-earth elements and cobalt, which are vital materials, from waste magnet materials. The process also allows for selective leaching of rare-earth elements from magnet-containing electronic wastes, such as end-of-life hard disk drives and electric motors. The use of copper salts eliminates the use of volatile toxic acids in the dissolution and separation processes, which provides for a more eco-friendly approach to recovering critical elements and a safer work environment. Recovered critical materials were shown to be suitable for reinsertion into the materials supply chain.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthetic Access to a Framework-Stabilized and Fully Sulfided Analogue of an Anderson Polyoxometalate that is Catalytically Competent for Reduction Reactions

Polyoxometalates (POMs) featuring 7, 12, 18, or more redox-accessible transition metal ions are ubiquitous as selective catalysts, especially for oxidation reactions. The corresponding synthetic and catalytic chemistry of stable, discrete, capping-ligand-free polythiometalates (PTMs), which could be especially attractive for reduction reactions, is much less well developed. Among the challenges are the propensity of PTMs to agglomerate and the tendency for agglomeration to block reactant access of catalyst active sites. Nevertheless, the pervasive presence of transition metal sulfur clusters metalloenzymes or cofactors that catalyze reduction reactions and the justifiable proliferation of studies of two-dimensional (2D) metal-chalcogenides as reduction catalysts point to the promise of well-defined and controllable PTMs as reduction catalysts. Here, we report the fabrication of agglomeration-immune, reactant-accessible, capping-ligand-free Co II Mo 6 IV S 24 n– clusters as periodic arrays in a water-stable, hierarchically porous Zr-metal–organic framework (MOF; NU1K) by first installing a disk-like Anderson polyoxometalate, Co III Mo 6 VI O 24 m– , in size-matched micropores where the siting is established via difference electron density (DED) X-ray diffraction (XRD) experiments. Flowing H 2 S, while heating, reduces molybdenum(VI) ions to Mo(IV) and quantitatively replaces oxygen anions with sulfur anions (S 2– , HS – , S 2 2– ). DED maps show that MOF-templated POM-to-PTM conversion leaves clusters individually isolated in open-channel-connected micropores. Importantly, the structure of the immobilized cluster as determined, in part, by X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS) analysis, and pair distribution function (PDF) analysis of total X-ray scattering agrees well with the theoretically simulated structure. PTM@MOF displays both electrocatalytic and photocatalytic competency for hydrogen evolution. Nevertheless, the initially installed PTM appears to be a precatalyst, gaining competency only after the loss of ~3 to 6 sulfurs and exposure to hydride-forming metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Biosynthesis of Minimal C-Phycocyanin Chromophore Assemblies in E. coli Provides a Platform to Dissect Protein-Mediated Tuning of Exciton Transfer

Cyanobacteria are arguably among the most evolutionarily successful organisms on Earth, inhabiting a wide range of ocean, freshwater, soil, and even desert environments on every continent. The cyanobacterial phycobilisome consists of stacks of disk-like light-collecting moieties, allophycocyanin (APC) and phycocyanin (CPC), with covalently bound phycocyanobilin (PCB) pigments. The ways in which the energies of the specific chromophores in these complexes are tuned by the protein to achieve its highly efficient and directional energy transfer are not fully understood, as complex combinations of decay pathways are occurring simultaneously and competitively through this elaborate light-harvesting system. This makes it difficult to extract information about isolated protein-pigment interactions. We provide herein a description of a useful new experimental platform in which we have recombinantly expressed a fully functioning CPC complex and selectively created minimal chromophore sets to study their individual contributions to the overall CPC spectra. Structural and computational analysis of this protein system have provided a greater understanding of how the protein environment serves to alter the photophysics of each of these chromophores. Introduction of a quencher into various positions within CPC confirmed the ability of the protein environment to tune the directionality of energy transport in this assembly. Further mutational analysis suggested the roles of key amino acids surrounding the chromophores, showcasing the utility of heterologous expression techniques for understanding the effects of structure on EET mechanisms in the phycobilisome.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interfacial Cation Arrangement Controls Electrocatalytic Kinetics in CO 2 Reduction

The identity of electrolyte cations is known to strongly influence electrocatalytic activity, but the relationship between their interfacial arrangement and observed performance remains poorly understood. Organic cations, with their molecular tunability, provide a powerful platform for systematically probing these effects. Here, we leverage phosphonium-based geminal dications to control interfacial cation arrangement and identify the variables that most strongly influence catalytic rates. As a case study, we examine CO 2 reduction to CO over polycrystalline silver electrodes in dry aprotic acetonitrile. Through a combination of rotating disk electrode measurements, electrochemical impedance spectroscopy, and molecular dynamics simulations, we decouple the effects of cation–electrode distance and interfacial cation density on catalytic rates. We find that smaller, more densely packed cations induce stronger interfacial electric fields, which lower the activation barrier for CO 2 adsorption and increase reaction rates. Using geminal phosphonium dications [C n (P mmm ) 2 ][ClO 4 ] 2 , we demonstrate that both the vertical and lateral positioning of organic cations within the electrical double layer independently affect reactivity. These results demonstrate that electrolyte cation identity primarily influences catalytic kinetics by determining how efficiently charge can be arranged at electrochemical interfaces. Altogether, our findings support an electrostatic view of cation effects in catalysis and provide design principles for next-generation electrolytes.

Cations↗
DOE OSTI2022

First Synoptic Images of FUV Discrete Aurora and Discovery of Sinuous Aurora at Mars by EMM EMUS

Abstract We present the first measurements of Mars discrete aurora in the extreme ultraviolet (<110 nm) and the first synoptic aurora images in the far ultraviolet (110–180 nm). Auroral emission is detected in >75% of nightside images, with patterns shifting visibly over 15–20 min. Aurora is observed most frequently in regions of open magnetic topology (where crustal magnetic fields are very weak and/or vertical), with the brightest aurora where crustal fields are strongest. We present the first disk‐averaged spectrum of discrete aurora, with several O, C, and CO features as expected for electron impact primarily on CO 2 . We categorize discrete auroral morphology into three types: crustal field aurora, non‐crustal field patchy aurora, and a new type we call “sinuous” aurora, an elongated serpentine structure that stretches thousands of kilometers into the nightside from near midnight in the northern hemisphere. These observations point to a highly dynamic environment in Mars' magnetotail.

Lillis, Robert J.↗
DOE OSTI2025

Auroral and Non‐Auroral H 3 + Ion Winds at Uranus With Keck‐NIRSPEC and IRTF‐iSHELL

Abstract To date, no investigation has documented ionospheric flows at Uranus. Previous investigations of Jupiter and Saturn have demonstrated that mapping ion winds can be used to understand ionospheric currents and how these connect to magnetosphere‐ionosphere coupling. We present a study of Uranus's near infrared emissions (NIR) using data from the Keck II Telescope's Near InfraRed SPECtrograph (NIRSPEC) and the InfraRed Telescope Facility's iSHELL spectrograph. H 3 + emission lines were used to derive dawn‐to‐dusk intensity, ionospheric temperatures and ion densities to identify auroral emissions, with their Doppler shifts used to measure ion velocities. We confirm the presence of the southern NIR aurora in 2016, driven by elevated H 3 + column densities up to 6.0 × 10 16 m −2 . While no auroral emissions were detected in 2014, we find a 14%–20% super rotation across the planet's disk in 2014 and a 7%–18% super rotation in 2016.

Thomas, Emma M. [Department of Mathematics Physics↗