Search NASA⌕ Search

SEARCH · Search NASA

Results for “doping effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Contact-dependent performance variability of monolayer MoS{sub 2} field-effect transistors

Using self-consistent quantum transport simulations, we investigate the performance variability of monolayer molybdenum disulfide (MoS{sub 2}) field-effect transistors (FETs) with various contact properties. Varying the Schottky barrier in MoS{sub 2} FETs affects the output characteristics more significantly than the transfer characteristics. If doped contacts are realized, the performance variation due to non-ideal contacts becomes negligible; otherwise, channel doping can effectively suppress the performance variability in metal-contact devices. Our scaling study also reveals that for sub-10-nm channels, doped-contact devices can be more robust in terms of switching, while metal-contact MoS{sub 2} FETs can undergo the smaller penalty in output conductance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, structural and dielectric properties of Ce-doped lead lanthanum titanate

Highlights: • The effect of Ce doping on the structural, dielectric properties and ac conductivity of Pb{sub 0.79-x}Ce{sub x}La{sub 0.21}TiO{sub 3} was studied. • A pseudo-cubic single phase was observed for all samples. • The phase transition temperature is found to decrease with increasing Ce content. • Change of the nature of Pb{sub 0.79}La{sub 0.21}TiO{sub 3} phase transition upon Ce-doping. • Several essential dielectric parameters were extracted. - Abstract: The influence of Ce doping on the structural, dielectric and ac conductivity properties of Pb{sub 0.79-x}Ce{sub x}La{sub 0.21}TiO{sub 3} powders (x = 0, 0.01, 0.03, 0.05 and 0.1) was investigated. X-ray diffraction shows that all samples have the pseudo-cubic crystal structure, in which the tetragonality and cell volume decrease with increasing Ce content. The change of the dielectric constant as a function of temperature demonstrates that the phase transition temperature decreases with the increase of Ce content. Normal behavior of the phase transition from ferroelectric to paraelectric was observed for Ce-doped samples, while the undoped powders exhibit a combination of diffuse phase transition and relaxor behaviors. From electrical conductivity versus 1/T plots, we have determined the activation energy, which was found to increase with increasing Ce concentration.

36 MATERIALS SCIENCE↗

Effect of W and WC on the oxidation resistance of yttria-doped silicon nitride

The effect of W and WC contamination on the oxidation and cracking in air of sintered Si3N4 - 8 w/o Y2O3 ceramics at 500, 750, and 1350 C is examined. A mixture of Si3N4 - 8Y2O3, milled with alumina balls, was divided into four portions. Three portions were doped with 2 w/o WC W, and 4 w/o W respectively, in order to simulate contamination during milling. The fourth portion was undoped and used on a control. The addition of W or WC did not affect the phase relationships in the system, as all bars with or without additions contained melilite as the major Si-Y-O-N phase after sintering. At 750 C, instability (rapid oxidation and cracking) of W-doped bars appears to have occurred as a result of oxidation of the tungsten containing melilite phase. No intermediate temperature instability was observed in bars containing 2 w/o WC or in bars with no additive. Specimens exposed at 1350 C had good oxidation resistance due to the formation of a protective siliceous oxide layer. A specimen containing 4 w/o W which was preoxidized at 1350 C had improved oxidation resistance at 750 C. The tendency towards oxidation and cracking of Si3N4 - 8 Y2O3 at 750 C is concluded to be related to tungsten content of the sintered bars.

Schuon, S.↗

Effect of 1 MeV electrons on ceria-doped solar cell cover glass

The effect of 1 MeV electrons on the transmission properties of 1.5-percent ceria-doped solar cell cover glass was studied. Samples of doped and undoped cover glass and synthetic fused silica were irradiated with a total integrated flux of 10 to the 15th power e/sq cm. Wideband transmission and spectral transmission measurements were made before and after irradiation. The results indicate that 1.5-percent ceria-doped cover glass is much less sensitive to radiation induced discoloration than undoped cover glass. Consequently, the glass is comparable to synthetic fused silica when used as a radiation resistant solar cell cover for many space missions.

Haynes, G. A.↗

Sb-Doped SnO 2 Nanorods Underlayer Effect to the α-Fe 2 O 3 Nanorods Sheathed with TiO 2 for Enhanced Photoelectrochemical Water Splitting

In this paper, a Sb-doped SnO 2 (ATO) nanorod underneath an α-Fe 2 O 3 nanorod sheathed with TiO 2 for photoelectrochemical (PEC) water splitting is reported. The experimental results, corroborated with theoretical analysis, demonstrate that the ATO nanorod underlayer effect on the α-Fe 2 O 3 nanorod sheathed with TiO 2 enhances the PEC water splitting performance. The growth of the well-defined ATO nanorods is reported as a conductive underlayer to improve α-Fe 2 O 3 PEC water oxidation performance. The α-Fe 2 O 3 nanorods grown on the ATO nanorods exhibit improved performance for PEC water oxidation compared to α-Fe 2 O 3 grown on flat fluorine-doped tin oxide glass. Furthermore, a simple and facile TiCl 4 chemical treatment further introduces TiO 2 passivation layer formation on the α-Fe 2 O 3 to reduce surface recombination. Finally, as a result, these unique nanostructures show dramatically improved photocurrent density (139% higher than that of the pure hematite nanorods).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic and magnetic properties of electron-doped V 2 O 5 and NaV 2 O 5

Because of its narrow split-off conduction band, doping of V 2 O 5 leads to interesting strongly correlated electrons. We study the effects of doping on V 2 O 5 's electronic and magnetic properties, either by adding electrons compensated by an artificial homogeneous background, or a virtual crystal approximation (VCA), by changing the atomic number Z V , so as to keep charge neutrality, or by explicitly introducing Na as a dopant. The former two are considered as a way to simulate injected charge by gating, the latter occurs in the vanadium bronze NaV 2 O 5 . We also simulate Na 1 - x V 2 O 5 using a virtual crystal approximation by changing the atomic number 10 ≤ Z Na ≤ 11 . The differences in the band structure, which result from how the electrons added to the band are compensated by positive charge in the three models, are compared. The electronic band structures are calculated using the quasiparticle self-consistent Q S G W method including a lattice polarization correction and the local spin density functional method with Hubbard- U corrections (LSDA+ U ). For NaV 2 O 5 , the half-filling leads to a splitting of the up- and down-spin lowest d x y band. The spins are found to prefer an antiferromagnetic ordering along the chain direction. Other spin configurations are shown to have higher energy and the exchange interactions are extracted and compared with literature. The optical conductivities are calculated and compared with experiment. Similar results are found for simply doping the band compensated by a background or virtual crystal approximation. Yet, the position of the occupied bands depends on the method chosen for compensating the charge. The most realistic way to simulate gating in which the compensating charge is kept away from the V 2 O 5 layer is the VCA with varying Z Na . The splitting between the up- and down-spin bands depends on the filling. Furthermore, we find that below a certain concentration of about 0.88 electrons per V, the FM arrangement becomes preferable over the antiferromagnetic one. The magnetic moments then gradually decrease as we lower the filling of the split-off band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Full characterization of ultrathin 5-nm low-k dielectric bilayers: Influence of dopants and surfaces on the mechanical properties

Ultrathin films and multilayers, with controlled thickness down to single atomic layers, are critical for advanced technologies ranging from nanoelectronics to spintronics to quantum devices. However, for thicknesses less than 10 nm, surfaces and dopants contribute significantly to the film properties, which can differ dramatically from that of bulk materials. Therefore, for amorphous films being developed as low dielectric constant interfaces for nanoelectronics, the presence of surfaces or dopants can soften films and degrade their mechanical performance. Here we use coherent short-wavelength light to fully and nondestructively characterize the mechanical properties of individual films as thin as 5 nm within a bilayer. In general, we find that the mechanical properties depend both on the amount of doping and the presence of surfaces. In very thin (5-nm) silicon carbide bilayers with low hydrogen doping, surface effects induce a substantial softening - by almost an order of magnitude - compared with the same doping in thicker (46-nm) bilayers. These findings are important for informed design of ultrathin films for a host of nano- and quantum technologies, and for improving the switching speed and efficiency of next-generation electronics.

36 MATERIALS SCIENCE↗

Free Volume Related Fluorescence Properties of Electron Irradiated Chalcone Doped PMMA Films

Effect of electron irradiation on free volume related fluorescence properties of chalcone doped Poly(methyl methacrylate)(PMMA) composite films have been studied using Positron Annihilation and Fluorescence spectroscopic techniques. In this polymer composite, enhancement of fluorescence at lower doses and reduction at higher doses has been observed under electron irradiation. From Positron annihilation studies suggests that at lower doses of irradiation induced crosslinking which affect the free volume properties and inturn hinders the chalcone molecular rotation. At higher doses chain scission process affect matrix relaxation. Under the restricted condition the chromophore molecules likely to emit enhanced fluorescence and its mobility is directly related to the free volume around it.

36 MATERIALS SCIENCE↗

Anomalous behavior of B{sub 1g} mode in highly transparent anatase nano-crystalline Nb-doped Titanium Dioxide (NTO) thin films

The effect of Niobium doping and size of crystallites on highly transparent nano-crystalline Niobium doped Titanium Dioxide (NTO) thin films with stable anatase phase are reported. The Nb doping concentration is varied within the solubility limit in TiO{sub 2} lattice. Films were annealed in controlled environment for improving the crystallinity and size of crystallites. Elemental and thickness analysis were carried out using Rutherford backscattering spectrometry and cross sectional field emission scanning electron microscopy. Structural characteristics reveal a substitutional incorporation of Nb{sup +5} in the TiO{sub 2} lattice which inhibits the anatase crystallites growth with increasing the doping percentage. The micro-Raman (MR) spectra of films with small size crystallites shows stiffening of about 4 cm{sup −1} for the E{sub g(1)} mode and is ascribed to phonon confinement and non-stoichiometry. In contrast, B{sub 1g} mode exhibits a large anomalous softening of 20 cm{sup −1} with asymmetrical broadening; which was not reported for the case of pure TiO{sub 2} crystallites. This anomalous behaviour is explained by contraction of the apical Ti-O bonds at the surface upon substitutional Nb{sup 5+} doping induced reduction of Ti{sup 4+} ions also known as hetero-coordination effect. The proposed hypotheses is manifested through studying the electronic structure and phonon dynamics by performing the near edge x-ray absorption fine structure (NEXAFS) and temperature dependent MR down to liquid nitrogen temperature on pure and 2.5 at.% doped NTO films, respectively.

36 MATERIALS SCIENCE↗

Magnetic Field Effects on Optical Conductivity of Doped Armchair Graphene Nanoribbon

We address the optical conductivity of armchair graphene nanoribbon within tight-binding model Hamiltonian using Green’s function approach. The possible effects of ribbon width, magnetic field, and chemical potential on optical absorption are investigated. We have also found the dependence of the optical conductivity for various ribbon widths and chemical potentials. Our results show a peak appears in the frequency dependence of optical conductivity of graphene nanoribbon. Upon increasing ribbon width, the height of the optical conductivity at frequency of peak increases. Also, applying the magnetic field causes an increase of the optical conductivity. However, upon more increase of the magnetic field leads to a decrease of the optical conductivity. Moreover, we study the effects of chemical potentials on frequency behavior of optical absorption of graphene nanoribbon for both metallic and insulator cases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Invariant exchange perturbation theory for multicenter systems and its application to the calculation of magnetic chains in manganites

The formalism of exchange perturbation theory is presented with regard to the general principles of constructing an antisymmetric vector with the use of the Young diagrams and tableaux in which the coordinate and spin parts are not separated. The form of the energy and wave function corrections coincides with earlier obtained expressions, which are reduced in the present paper to a simpler form of a symmetry-adapted perturbation operator, which preserves all intercenter exchange contributions. The exchange perturbation theory (EPT) formalism itself is presented in the standard form of invariant perturbation theory that takes into account intercenter electron permutations between overlapping nonorthogonal states. As an example of application of the formalism of invariant perturbation theory, we consider the magnetic properties of perovskite manganites La{sub 1/3}Ca{sub 2/3}MnO{sub 3} that are associated with the charge and spin ordering in magnetic chains of manganese. We try to interpret the experimental results obtained from the study of the effect of doping the above alloys by the model of superexchange interaction in manganite chains that is constructed on the basis of the exchange perturbation theory (EPT) formalism. The model proposed makes it possible to carry out a quantitative analysis of the effect of substitution of manganese atoms by doping elements with different electron configurations on the electronic structure and short-range order in a magnetic chain of manganites.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic and transport properties of Fe-doped Weyl semimetal Co 3 Sn 2 S 2

Ferromagnetic Weyl semimetal Co 3 Sn 2 S 2 has recently attracted a lot of interest on account of its large non-saturating magnetoresistance and the high carrier mobility common to topological semimetals. Moreover, the material also provides a platform for studying the interplay between the intrinsic magnetism and topological band structures, which generates a significant anomalous Hall effect. Chemical doping is the usual approach to adjust materials’ properties, and it can lead to fascinating results. Here, we present the influence of Fe-doping on the magnetic and transport properties of polycrystalline Co 3 Sn 2 S 2 . The Fe-doping suppresses the sample’s magnetic order, increases the electrical resistivity, results in a skew-scattering contribution to the anomalous Hall effect and Fe impurities cause the Kondo effect. In addition, we report on the impact of Fe-doping on the magnetoresistance of Co 3 Sn 2 S 2 , where Fe-doping leads to a dramatic decline in magnetoresistance. Furthermore, the hysteresis behavior in the low magnetic field region, detected previously in nanoflake samples only, is observed in both pure and Fe-doped Co 3 Sn 2 S 2 bulk samples. Finally, our findings serve as a reference and source of inspiration for future chemical doping research on topological semimetals.

36 MATERIALS SCIENCE↗

Longitudinal Magnetic Field Effects on Thermal Transport of Doped Bilayer Graphene

We address thermal conductivity of doped biased bilayer graphene for AA-stacking in the context of tight binding model hamiltonian. The effect of magnetic field as its direction is along perpendicular to graphene plane on thermal conductivity has been investigated. Green’s function approach has been implemented to find the behavior of thermal conductivity of bilayer graphene within linear response theory. We have found the chemical potential dependence of thermal conductivity for different values of magnetic field and bias voltage. Also a peak in the dependence of thermal conductivity on magnetic field has been observed. Moreover, in the absence of magnetic field, we find a monotonic decreasing behavior for chemical dependence of thermal conductivity. However, a peak appears in chemical potential dependence of thermal conductivity at nonzero magnetic field. Finally, the behavior of Seebeck coefficient in terms of magnetic field and chemical potential has been studied in details.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bandgap engineering of SrZrS 3 chalcogenide perovskite via substitutional doping for photovoltaic applications: a first-principles DFT study

Strontium zirconium sulfide (SrZrS 3 ) has garnered significant attention for photovoltaic (PV) applications due to its excellent optoelectronic properties, high chemical and moisture stability, and non-toxicity. However, the bandgaps of both the α- and β-phases lie outside the optimum ranges for both single-junction solar cells (SJSCs) and tandem solar cells (TSCs), thereby limiting their applications in PV technologies. In this study, we employed hybrid density functional theory to engineer the band gaps of α- and β-SrZrS 3 through substitutional doping. We considered three dopants (Hf, Sn, and Ti) at the Zr site of SrZrS 3 with varying doping concentrations and investigated their effects on the structural, electronic, and optical properties of the materials. We found that Sn and Ti doping effectively lowers the band gaps of both α- and β-SrZrS 3 , whereas Hf doping increases them. For x values up to 0.25, the band gaps of the α-SrZr 1−x Sn x S 3 and α-SrZr 1−x Ti x S 3 are within the optimum range for SJSCs, and those of β-SrZr 1−x Sn x S 3 and β-SrZr 1−x Ti x S 3 lie within the optimum range for Si/perovskite as well as perovskite/perovskite TSCs. The three dopants exhibited significant effects on the optical properties of both α- and β-SrZrS 3 , including the absorption coefficient, energy-loss functions, reflectivity, and refractivity spectra. Thermodynamic stability analysis revealed that for both phases, SrZr 1−x Hf x S 3 can be synthesized via exothermic processes, whereas the formation of SrZr 1−x Ti x S 3 and SrZr1−xSn x S 3 is endothermic and hence, not thermodynamically favorable. Further analysis showed that SrZr 1−x Ti x S 3 in both α- and β-phases are stable under thermodynamic equilibrium conditions, whereas SrZr 1−x Sn x S 3 is prone to dissociation into ternary phases (SrZrS 3 and SrSnS 3 ), especially at higher doping concentrations. These results show that Ti doping is effective in tuning the band gaps of α- and β-SrZrS 3 toward the optimal values for PV applications.

14 SOLAR ENERGY↗

Spin-orbital coupling and slow phonon effects enabled persistent photoluminescence in organic crystal under isomer doping

When periodically packing the intramolecular donor-acceptor structures to form ferroelectric-like lattice identified by second harmonic generation, our CD49 molecular crystal shows long-wavelength persistent photoluminescence peaked at 542 nm with the lifetime of 0.43 s, in addition to the short-wavelength prompt photoluminescence peaked at 363 nm with the lifetime of 0.45 ns. Interestingly, the long-wavelength persistent photoluminescence demonstrates magnetic field effects, showing as crystalline intermolecular charge-transfer excitons with singlet spin characteristics formed within ferroelectric-like lattice based on internal minority/majority carrier-balancing mechanism activated by isomer doping effects towards increasing electron-hole pairing probability. Our photoinduced Raman spectroscopy reveals the unusual slow relaxation of photoexcited lattice vibrations, indicating slow phonon effects occurring in ferroelectric-like lattice. Here, we show that crystalline intermolecular charge-transfer excitons are interacted with ferroelectric-like lattice, leading to exciton-lattice coupling within periodically packed intramolecular donor-acceptor structures to evolve ultralong-lived crystalline light-emitting states through slow phonon effects in ferroelectric light-emitting organic crystal.

36 MATERIALS SCIENCE↗

Structural and electrical characteristics of dysprosium-doped barium stannate titanate ceramics

Effects of dysprosium (Dy) amphoteric doping on the structural, dielectric and electric properties of barium stannate titanate (BTS) ceramics have been studied. X-ray diffraction analyses reveal that all Dy-doped BTS ceramics exhibit cubic perovskite structure until to 1 mol%. Dy doping at the A site shows lower solubility than that at the B site. SEM surface morphologies display that the Dy B site doping is beneficial for the compact and homogeneous grain distribution. The dielectric constant and loss tangent are reduced with increase of the doping levels. Impedance spectroscopy investigation demonstrates that all samples are insulating at room temperature. Doping alters the full resistive regions of pure BTS ceramics to Doped BTS with insulating grain boundaries and semiconducting bulk regions, but the doping contents has little effect on changing the electric structures.

36 MATERIALS SCIENCE↗

Toughening Sm–Co sintered magnets via microstructure modification with additives

We report the mechanical properties of the brittle Smsingle bondCo permanent magnets are of great practical significance. However, studies on the magnets have mostly focused on their magnetic properties. This paper reports the modified microstructure and refined unimodal grain size, enhanced flexural strength, and magnetic properties of Sm 2 (Co,Fe,Cu,Zr) 17 sintered magnets doped with La 2 O 3 , MgO, and CaF 2 fine particulates. The correlations between microstructure, phase composition, and mechanical and magnetic properties were studied. Doping of a small amount (e.g., 0.5–3 wt%) of La 2 O 3 , MgO, or CaF 2 fine particulates could significantly refine the unimodal grain sizes of the Smsingle bondCo magnets via the Zener pinning effect. Moreover, doping significantly improved the flexural strengths σ of the magnets. For example, the σ values of the magnets with 0.5 wt% MgO, 1 wt% La 2 O 3 , and 1 wt% CaF 2 were approximately 65%, 63%, and 42% higher than that of the reference magnet, respectively. Micromechanical simulations revealed that the fine particles of La 2 O 3 could deflect crack growth, while the CaF 2 particles could attract or arrest cracks during the fracture process. The mechanical strengthening effect was mainly due to grain size refinement. The Smsingle bondCo magnets with 0.5–1.5 wt% CaF2 and 0.5 wt% La 2 O 3 exhibited excellent magnetic properties while doping 1–3 wt% La2O3 and 0.5–3 wt% MgO deteriorated magnetic performance. The rational design of CaF 2 - or La 2 O 3 -doped microstructure can be an economical and effective method for producing toughened Sm–Co sintered magnets with high magnetic performance.

36 MATERIALS SCIENCE↗