Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamics simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Material Model Parameters Optimization in Liquid Mercury Target Dynamics Simulation With Machine Learning Surrogates

A pulsed spallation target is subjected to very short (∼0.7μs) but intense loads (23.3 kJ) from repeated proton pulses, which knock away neutrons from the mercury atoms’ nuclei for a wide range application in physics, engineering, medicine, petroleum exploration, biology, chemistry, etc. The effect of this pulsed loading on the stainless-steel target module which contains the flowing mercury target material is difficult to predict not only due to its short but intense explosive-like physical reaction, but also the nonlinear material behavior of the liquid mercury in the structure. Injecting small helium bubbles in the mercury has been an efficient method of mitigating the pressure wave at high power level stage. However, prediction of the resultant loading on the target is more difficult when helium gas is intentionally injected into the mercury. A 2-phase material model that incorporates the Rayleigh-Plesset (R-P) model is expected to address this complex multi-physics dynamics problem by including the bubble dynamics in the liquid mercury. A parameter sensitivity study was firstly employed to understand their impact on the simulation strains. The investigated parameters included E, μ, γ, σ, n, VFgas, and gas cumulative volume curve control parameters a and b. Verification and validation results from sparse polynomial expansions (SPE) method and directional Gaussian smoothing (DGS) optimization show that the surrogate model had training error of ∼7% and validation error of ∼15%, indicating that machine learning methods and surrogate models can help optimize the uncertain parameters in the complex 2-phase material model. This approach is expected to fill the knowledge gap between unknown liquid-gas mixture material model and measured vessel strain responses.

Lin, Lianshan↗
DOE OSTI2019

Coarse grained computational fluid dynamic simulation of sands and biomass fluidization with a hybrid drag

We report the bubbling fluidized bed reactor is widely used in fast pyrolysis of biomass. Discrete simulation of this reactor is challenging due to many sand particles and lack of accurate drag corrections accounting for the interaction of two different solid particles with different properties. In this research, the computational cost is reduced by using the coarse-grained computational fluid dynamic-discrete element method, where many sand particles are lumped into a larger numerical parcel. The Syamlal–O'Brien drag model is used for sand, while Ganser correction coupled with Gidaspow model is used for the nonspherical biomass particles. This hybrid approach shows superior behavior over other drag models using pressure drops as a benchmark. The predicted bed height and pressure fluctuating frequencies compare well with experiment. Finally, the mixing of biomass is close to perfect if the superficial velocity is larger than four times the minimum fluidization velocity.

09 BIOMASS FUELS↗
DOE OSTI2019

Cluster dynamics simulation of uranium self-diffusion during irradiation in UO 2

While fission fragments pass through UO 2 nuclear fuel, a considerable concentration of Frenkel pair defects (i.e. vacancies and interstitials) are created. The steady-state concentration of these defects leads to enhanced uranium self-diffusion, one of several fundamental kinetic parameters that control key engineering properties such as creep and fission gas swelling in UO 2 nuclear fuel. A cluster dynamics method to track point defects and defect clusters has been implemented in the MARMOT phase-field code in order to predict as-measured out-of-pile and irradiation enhanced thermal diffusivity. Here, the calculated uranium self-diffusion coefficient compares well with non-irradiated fuel measurements, and shows similar trends to those observed in irradiated fuel, which is a good result given the complexities introduced by non-stoichiometric compositions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1994

Application of a distributed network in computational fluid dynamic simulations

A general-purpose 3-D, incompressible Navier-Stokes algorithm is implemented on a network of concurrently operating workstations using parallel virtual machine (PVM) and compared with its performance on a CRAY Y-MP and on an Intel iPSC/860. The problem is relatively computationally intensive, and has a communication structure based primarily on nearest-neighbor communication, making it ideally suited to message passing. Such problems are frequently encountered in computational fluid dynamics (CDF), and their solution is increasingly in demand. The communication structure is explicitly coded in the implementation to fully exploit the regularity in message passing in order to produce a near-optimal solution. Results are presented for various grid sizes using up to eight processors.

Deshpande, Manish↗
DOE OSTI2018

Molecular dynamics simulation of methane transport in confined organic nanopores with high relative roughness

Understanding and characterizing the transport of shale gas (methane) through the nanopores of kerogens are critical for the accurate prediction of shale gas recovery. However, the key factors that regulate shale gas transport through highly roughened nanopores of shale kerogens are not fully understood. Here in this work, methane transport in organic nanopores with a high relative roughness is characterized using equilibrium and non-equilibrium molecular dynamics methods. According to our results, the CH 4 mass flux has a linear relationship with the pressure gradient, consistent with previous studies, while the calculated slip lengths and gas fluxes varied with different roughness geometries in the order of sigmoidal ≥ triangular > rectangular. Surface slip flow can be a major contributor to the overall gas flux, but surprisingly, the relative contribution of surface slip flow is independent of the pressure gradient. In contrast, the contributions of both slip flow and the average gas fluxes vary strongly with pore diameters. Typical contributions of the adsorbed layer to the overall gas flux are in the range 20–40% but vary from as high as 74% in a 4-nm pore to as low as 6% in a 16-nm pore. Compared to smooth nanopores, we find that, in nanopores with realistically high degrees of relative roughness, methane confinement in cavities decouples slip flow from the flow in the pore interior, significantly reducing the overall flux.

03 NATURAL GAS↗
DOE OSTI2024

Evaluation of δ-Phase ZrH1.4 to ZrH1.7 Thermal Neutron Scattering Laws Using Ab Initio Molecular Dynamics Simulations

Zirconium hydride is commonly used for next-generation reactor designs due to its excellent hydrogen retention capacity at temperatures below 1000 K. These types of reactors operate at thermal neutron energies and require accurate representation of thermal scattering laws (TSLs) to optimize moderator performance and evaluate the safety indicators for reactor design. In this work, we present an atomic-scale representation of sub-stoichiometric ZrH2−x(0.3≤x≤0.6), which relies on ab initio molecular dynamics (AIMD) in tandem with velocity auto-correlation (VAC) analysis to generate phonon density of states (DOS) for TSL development. The novel NJOY+NCrystal tool, developed by the European Spallation Source community, was utilized to generate the TSL formulations in the A Compact ENDF (ACE) format for its utility in neutron transport software. First, stoichiometric zirconium hydride cross sections were benchmarked with experiments. Then sub-stoichiometric zirconium hydride TSLs were developed. Significant deviations were observed between the new δ-phase ZrH2−x TSLs and the TSLs in the current ENDF release. It was also observed that varying the hydrogen vacancy defect concentration and sites did not cause as significant a change in the TSLs (e.g., ZrH1.4 vs. ZrH1.7) as was caused by the lattice transformation from ϵ- to δ-phase.

42 ENGINEERING↗
DOE OSTI2021

Computational Fluid Dynamic Simulation for Electrolyte Flow in Horizontal EP of Nb SRF Elliptical Cavities

An electrolyte flow velocity on an electropolishingsurface affects a material removal rate where higherremoval is observed with a higher velocity of theelectrolyte. In horizontal EP (HEP) of an ellipticalcavity, an electrolyte flow near the equator positionmight remain slow and responsible for a lowerremoval compared to that on the iris and beam pipepositions. In order to understand the flow dynamicon an elliptical cavity surface in the horizontal EPprocess, a computational fluid dynamic simulationwas conducted. This study was conducted on 1.3GHz cavity with different cathodes and acid flowrates. Final aim of the study is to improve the flowuniformity to attain uniform removal especially inmulticell cavities.

Chouhan, V.↗
DOE OSTI2016

Incorporating Oxygen Uncoupling Kinetics into Computational Fluid Dynamic Simulations of a Chemical Looping System

Chemical looping with oxygen uncoupling (CLOU) is a carbon-capture technology that utilizes a metal oxide as an oxygen carrier to separate oxygen from air and releases gaseous O 2 into a reactor where fuel is fed. Earlier experimental and simulated work has been performed on systems less than 1 MW. Previous work has been limited to one-dimensional kinetic simulations. Literature kinetics were modified to work in a Barracuda-VR simulation package. A simplified spreadsheet model was used to verify the Barracuda-VR simulation adaption of the kinetics to previously published results. The simulated kinetics, literature models, and raw data matched well. The adapted kinetics were then incorporated into a 10 kW dual bubbling bed CLOU system three-dimensional simulation. The simulations predicted carbon capture efficiency similar to that reported previously for similar systems. The solid circulation rate, temperature profile, and gas concentration profiles followed the expected trends. The overall three-dimensional simulation of kinetics showed reasonable results for what has been previously reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A comparative study of the effectiveness of empirical potentials for molecular dynamics simulations of borosilicate glasses

Despite their practical importance, atomistic modeling of B 2 O 3 containing glasses have been challenging due to the lack of reliable empirical potentials. Fortunately, a few recent developments have shown promises to simulate these glasses where the boron coordination has complex and non-linear dependence on glass composition. This work aims to provide an evaluation of the effectiveness of three recently developed potentials by a systematic study of a series (~20) of sodium borosilicate glasses with constant K (ratio of [SiO 2 ]/[B 2 O 3 ]) =2 and varying R (ratio of [Na 2 O]/[B 2 O 3 ] ranging from 0.1 to 4) values and several sodium boroaluminosilicate glasses. A comparative assessment was established on the basis of the short- and medium-range structure features, such as boron N 4 values, total correlation functions, bond angle distribution, oxygen speciation, and mechanical properties using experimental or well-established models as criteria. Furthermore, this work provides insights on the choices of empirical potentials for MD simulations of borosilicate glasses and gives directions of future potential development and refining.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Horizons of modern molecular dynamics simulation in digitalized solid freeform fabrication with advanced materials

Our ability to shape and finish a component by combined methods of fabrication including (but not limited to) subtractive, additive and/or no theoretical mass-loss/addition during the fabrication is now popularly known as solid free form fabrication. Fabrication of a telescope mirror is a typical example where grinding and polishing processes are first applied to shape the mirror and thereafter an optical coating is usually applied to enhance its optical performance. The area of nanomanufacturing cannot grow without a deep knowledge of the fundamentals of materials and consequently, the use of computer simulations is becoming ubiquitous. This article is intended to introduce the most recent advances in the computation benefit specific to the area of solid free form fabrication as these systems are traversing through the journey of digitalisation and Industry-4.0. Specifically, this article demonstrates that the application of the latest materials modelling approaches, based on techniques such as molecular dynamics, are enabling breakthroughs in applied precision manufacturing techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Optimal Execution of Co-analysis for Large-scale Molecular Dynamics Simulations

The analysis of scientific simulation data enables scientists to derive insights from their simulations. This analysis of the simulation output can be performed at the same execution site as the simulation using the same resources or can be done at a different site. The optimal output frequency is challenging to decide and is often chosen empirically. We propose a mathematical formulation for choosing the optimal frequency of data transfer for analysis and the feasibility of performing the analysis, under the given resource constraints such as network bandwidth, disk space, available memory, and computation time. We propose formulations for two cases of co-analysis -- local and remote. We consider various analyses features such as computation time, input data and memory requirement, importance of the analysis and minimum frequency required for performing the analysis. We demonstrate the effectiveness of our approach using molecular dynamics applications on the Mira and Edison supercomputers.

analysis↗
DOE OSTI2019

Dynamical simulations of the Muon Campus at Fermilab

The Muon Campus at Fermilab is a system through which muons are delivered to the storage ring of the Muon g-2 Experiment (E989). It consists of a set of 1 km beamlines that transport and prepare a highly polarized muon beam out of secondaries produced downstream a target station. Realistic simulations of this beam delivery system (BDS) using COSY INFINITY, and presented here, contribute to the understanding and characterization of the muon beam production in relation to the statistical and systematic uncertainties of the E989 measurement, intended to be smaller than 0.14 parts per million to achieve the goals of the experiment. The impact of nonlinearities from fringe fields and high-order contributions on the BDS performance are presented, as well as detailed studies of the interactions between secondaries and the beamline elements apertures, particle decay channels, spin dynamics and beamline misalignments.

43 PARTICLE ACCELERATORS↗