Search NASA⌕ Search

SEARCH · Search NASA

Results for “emission modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Emissions and Flame Structure Assessment of Aeroengine Micromixing Injectors for Lean Direct Injection of Hydrogen and Hydrogen/Natural Gas Blends

Abstract The present study focuses on whether adapting low emissions liquid fuel injection concepts can be applied to gaseous mixtures. The goal is to develop an injector with specific geometric characteristics that will achieve the lowest emissions. This is conducted by evaluating emissions and flame diagnostics on a set of test hardware that has been developed for combustion of pure hydrogen and hydrogen/methane mixtures. The current test hardware adapts lean direct injection concepts from aeroengine injectors to a ground-based engine based on target flows associated with a Solar Turbines Industrial Engine gas turbine. A statistical test plan was developed to assess these geometric characteristics using a three level Box Behnken design. The test plan investigates the effect of injector flow splits, air swirl, fuel swirl, pressure drop, preheat temperature, fuel composition, and the adiabatic flame temperature on the flame structure and emissions performance. A total of 16 injectors were considered for a total of 688 test points for emission and imaging data. Emissions data were reported on a mass basis in ng/J and chemical reactor network analysis were conducted to further interpret emissions behavior. Images were also captured to analyze the flame structure features of interest including reaction volume, flame length, flame spread, and flame width. With these results, a predictive model for emissions was made to conclude the most optimal injector configuration is to have the highest level of air split (more volume of air through the injector plate versus the injector) and air swirl angle for both methane and hydrogen gas mixtures. The predictive emissions level for all of these cases were below 10 ng/J.

08 HYDROGEN↗
DOE OSTI2020

Advanced modeling of field enhanced thermionic emission

Shaped emitters are of interest to a broad range of applications in vacuum electronic devices. In particular, thermionic energy converters (TECs) take advantage of shaped emitters to increase the local surface field, thereby extracting more current for a given cathode temperature and applied voltage. However, modeling these devices is challenging; Warp [J.-L. Vay, D. P. Grote, R. H. Cohen, and A. Friedman, Comput. Sci. Discov. 5, 014019 (2012)] is a fully 3D particle-in-cell code capable of handling a wide range of physics problems and is well suited to modeling TECs. Additionally, recent improvements to Warp have enabled the accurate modeling of emitters with arbitrary curved surfaces. Specifically, the inclusion of subgrid resolution for computing the electrostatic potential and the ability to apply mesh refinement for specific areas of interest allow for a more accurate solution to the fields on these surfaces. These improvements coupled with Warp’s ability to handle variable particle weights make it an ideal candidate for simulating these complex devices. In this paper, the authors study the applicability of different subgrid configurations for simulating shaped emission surfaces and field convergence for different mesh-refinement techniques. They then implement a custom weighting algorithm that allows for uniform sampling of emission surfaces with a large variation in the surface electric field. They then use this algorithm to study emission for curved emitters in both the field-enhancement regime and the space-charge regime.

Edelen, Jonathan P. (ORCID:0000000215180652)↗
DOE OSTI2023

VERITAS Discovery of Very High Energy Gamma-Ray Emission from S3 1227+25 and Multiwavelength Observations

We report the detection of very high energy gamma-ray emission from the blazar S3 1227+25 (VER J1230+253) with the Very Energetic Radiation Imaging Telescope Array System (VERITAS). VERITAS observations of the source were triggered by the detection of a hard-spectrum GeV flare on 2015 May 15 with the Fermi-Large Area Telescope (LAT). A combined 5 hr VERITAS exposure on May 16 and 18 resulted in a strong 13σ detection with a differential photon spectral index, Γ = 3.8 ± 0.4, and a flux level at 9% of the Crab Nebula above 120 GeV. This also triggered target-of-opportunity observations with Swift, optical photometry, polarimetry, and radio measurements, also presented in this work, in addition to the VERITAS and Fermi-LAT data. A temporal analysis of the gamma-ray flux during this period finds evidence of a shortest variability timescale of τ obs = 6.2 ± 0.9 hr, indicating emission from compact regions within the jet, and the combined gamma-ray spectrum shows no strong evidence of a spectral cutoff. An investigation into correlations between the multiwavelength observations found evidence of optical and gamma-ray correlations, suggesting a single-zone model of emission. Finally, the multiwavelength spectral energy distribution is well described by a simple one-zone leptonic synchrotron self-Compton radiation model.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2013

Tropospheric Ozone Changes, Radiative Forcing and Attribution to Emissions in the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP)

Ozone (O3) from 17 atmospheric chemistry models taking part in the Atmospheric Chemistry and Climate Model Intercomparison Project (ACCMIP) has been used to calculate tropospheric ozone radiative forcings (RFs). All models applied a common set of anthropogenic emissions, which are better constrained for the present-day than the past. Future anthropogenic emissions follow the four Representative Concentration Pathway (RCP) scenarios, which define a relatively narrow range of possible air pollution emissions. We calculate a value for the pre-industrial (1750) to present-day (2010) tropospheric ozone RF of 410 mW m−2. The model range of pre-industrial to present-day changes in O3 produces a spread (+/-1 standard deviation) in RFs of +/-17%. Three different radiation schemes were used - we find differences in RFs between schemes (for the same ozone fields) of +/-10 percent. Applying two different tropopause definitions gives differences in RFs of +/-3 percent. Given additional (unquantified) uncertainties associated with emissions, climate-chemistry interactions and land-use change, we estimate an overall uncertainty of +/-30 percent for the tropospheric ozone RF. Experiments carried out by a subset of six models attribute tropospheric ozone RF to increased emissions of methane (44+/-12 percent), nitrogen oxides (31 +/- 9 percent), carbon monoxide (15 +/- 3 percent) and non-methane volatile organic compounds (9 +/- 2 percent); earlier studies attributed more of the tropospheric ozone RF to methane and less to nitrogen oxides. Normalising RFs to changes in tropospheric column ozone, we find a global mean normalised RF of 42 mW m(−2) DU(−1), a value similar to previous work. Using normalised RFs and future tropospheric column ozone projections we calculate future tropospheric ozone RFs (mW m(−2); relative to 1750) for the four future scenarios (RCP2.6, RCP4.5, RCP6.0 and RCP8.5) of 350, 420, 370 and 460 (in 2030), and 200, 300, 280 and 600 (in 2100). Models show some coherent responses of ozone to climate change: decreases in the tropical lower troposphere, associated with increases in water vapour; and increases in the sub-tropical to mid-latitude upper troposphere, associated with increases in lightning and stratosphere-to-troposphere transport. Climate change has relatively small impacts on global mean tropospheric ozone RF.

climate change↗
NASA NTRS1995

ASCA solid state imaging spectrometer observations of O stars

We report ASCA Solid State Imaging Spectrometer (SIS) x-ray observations of the O stars delta Ori and lambda Ori. The energy resolution of the SIS allows us to resolve features in the O star x-ray spectra which are not apparent in spectra obtained by x-ray spectrometers with lower energy resolution. SIS spectra from both stars show evidence of line emission, suggesting the thermal nature of the x-ray source. However, the observed line strengths are different for the two stars. The observed stellar x-ray spectra are not well described by isothermal models although absorbed thermal emission models with two or more temperatures can provide an adequate fit to the data. For both stars we present evidence of absorbing columns significantly larger than the known ISM columns, indicative of absorption by a circumstellar medium, presumably the stellar winds. In addition, the lambda Ori spectrum shows the presence of emission at energies greater than 3 keV which is not seen in the delta Ori spectrum.

Corcoran, M. F.↗
DOE OSTI2021

The TW Hya Rosetta Stone Project. I. Radial and Vertical Distributions of DCN and DCO{sup +}

Molecular D/H ratios are frequently used to probe the chemical past of solar system volatiles. Yet it is unclear which parts of the solar nebula hosted an active deuterium fractionation chemistry. To address this question, we present 0."2–0."4 Atacama Large Millimeter/submillimeter Array (ALMA) observations of DCO{sup +} and DCN 2–1, 3–2, and 4–3 toward the nearby protoplanetary disk around TW Hya, taken as part of the TW Hya Rosetta Stone project, augmented with archival data. DCO{sup +} is characterized by an excitation temperature of ~40 K across the 70 au radius pebble disk, indicative of emission from a warm, elevated molecular layer. Tentatively, DCN is present at even higher temperatures. Both DCO{sup +} and DCN present substantial emission cavities in the inner disk, while in the outer disk the DCO{sup +} and DCN morphologies diverge: most DCN emission originates from a narrow ring peaking around 30 au, with some additional diffuse DCN emission present at larger radii, while DCO{sup +} is present in a broad structured ring that extends past the pebble disk. Based on a set of simple parametric disk abundance models, these emission patterns can be explained by a near-constant DCN abundance exterior to the cavity, and an increasing DCO{sup +} abundance with radius. In conclusion, the ALMA observations reveal an active deuterium fractionation chemistry in multiple disk regions around TW Hya, but not in the cold planetesimal-forming midplane and in the inner disk. More observations are needed to explore whether deuterium fractionation is actually absent in these latter regions, and if its absence is a common feature or something peculiar to the old TW Hya disk.

36 MATERIALS SCIENCE↗
NASA NTRS1987

The IR emission features - Emission from PAH molecules and amorphous carbon particles

Techniques for the assessment of the importance of the various forms of PAHs, and recent infrared observations concerning the PAH problem, are considered. Spectroscopic data suggest that the observed interstellar spectrum is due to both free molecule-sized PAHs producing the narrow features, and amorphous carbon particles contributing to the broad underlying components. Explanations for the multicomponent emission spectrum are discussed. A model of the emission mechanism for the example of chrysene is presented, and an exact treatment of the IR fluorescence from highly vibrationally excited large molecules shows that species containing 20-30 carbon atoms are responsible for the narrow features, although the spectra more closely resemble those of amorphous carbon particles. It is suggested that future emphasis should be placed on the spatial characteristics of the component spectra.

Allamandola, L. J.↗
NASA NTRS2019

Detection of Propadiene on Titan

The atmosphere of Titan, the largest moon of Saturn, is rich in organic molecules, and it has been suggested that the moon may serve as an analog for the pre-biotic Earth due to its highly reducing chemistry and existence of global hazes. Photochemical models of Titan have predicted the presence of propadiene (historically referred to as allene), CH2CCH2, an isomer of the well-measured propyne (also called methylacetylene) CH3CCH, but its detection has remained elusive due to insufficient spectroscopic knowledge of the molecule. This has recently been remedied with an updated spectral line list. Here we present the first unambiguous detection of the molecule in any astronomical object, observed with the Texas Echelle Cross Echelle Spectrograph on the NASA Infrared Telescope Facility in 2017 July. We model its emission line near 12 μm and measure a volume mixing ratio of (6.9 ± 0.8) × 10(exp −10) at 175 km, assuming a vertically increasing abundance profile as predicted in photochemical models. Cassini measurements of propyne made during 2017 April indicate that the abundance ratio of propyne to propadiene is 8.2 ± 1.1 at the same altitude. This initial measurement of the molecule in Titan's stratosphere paves the way toward constraining the amount of atomic hydrogen available on Titan, as well as future mapping of propadiene on Titan from 8 m and larger ground-based observatories, and future detection on other planetary bodies.

Propadiene or allene↗
NASA NTRS1994

ASCA solid state imaging spectrometer observations of O stars

We report ASCA Solid State Imaging Spectrometer (SIS) X-ray observations of the O stars delta Ori and lambda Ori. The energy resolution of the SIS allows us to resolve features in the O star X-ray spectra which are not apparent in spectra obtained by X-ray spectrometers with lower energy resolution. SIS spectra from both stars show evidence of line emission, suggesting the thermal nature of the X-ray source. However, the observed line strengths are different for the two stars. The observed stellar X-ray spectra are not well described by isothermal models although absorbed thermal emission models with two or more temperatures can provide an adequate fit to the data. For both stars we present evidence of absorbing columns significantly larger than the known Interstellar Medium (ISM) columns, indicative of absorption by a circumstellar medium, presumably the stellar winds. In addition, the lambda Ori spectrum shows the presence of emission at energies greater than 3 keV which is not seen in the delta Ori spectrum.

Corcoran, M. F.↗
DOE OSTI2025

Technical, Economic, Energetic, and Environmental Evaluation of Pretreatment Strategies for Scaling Control in Brackish Water Desalination Brine Treatment

Effective pretreatment is essential for achieving long-term stable operation and high water recovery during the desalination of alternative waters. This study developed a process modeling approach for technical, economic, energetic, and environmental assessments of pretreatment technologies to identify the impacts of each technology treating brackish water desalination brine with high scaling propensity. The model simulations evaluated individual pretreatment technologies, including chemical softening (CS), chemical coagulation (CC), electrocoagulation (EC), and ion exchange (IX). In addition, combinations of these pretreatment technologies aiming at the effective reduction of key scaling constituents such as hardness and silica were investigated. The three evaluation parameters in this assessment consist of levelized cost of water (LCOW, $/m 3 ), specific energy consumption and cumulative energy demand (SEC|CED, kWh/m 3 ), and carbon dioxide emissions (CO 2 , kg CO 2-eq /m 3 ). The case study evaluated in this work was the desalination brine from the Kay Bailey Hutchison Desalination Plant (KBHDP) with a total dissolved solids (TDS) concentration of 11,000 mg/L and rich in hardness and silica. The evaluation of individual pretreatment units from the highest to lowest LCOW, SEC|CED, and CO 2 emissions in the KBHDP brine was IX > CS > EC > CC, CS > IX > EC > CC, and CC > CS > EC > IX, respectively. In the case of pretreatment combinations for the KBHDP, the EC + IX treatment combination was shown to be the best in terms of the LCOW and CO 2 emissions. The modeling and evaluation of these pretreatment units provide valuable guidance on the selection of cost-effective, energy-efficient, and environmentally sustainable pretreatment technologies tailored to desalination brine applications for minimal- or zero-liquid discharge.

14 SOLAR ENERGY↗
NASA NTRS1991

A description of the correlated k distributed method for modeling nongray gaseous absorption, thermal emission, and multiple scattering in vertically inhomogeneous atmospheres

A radiative transfer method for treating nongray gaseous absorption and thermal emission in vertically inhomogeneous multiple scattering atmospheres is described. Probability density distributions of absorption coefficient strength are derived from line-by-line calculations to construct line-by-line and band model based k distributions. The monotonic ordering of absorption coefficient strengths in these k distributions implicitly preserves the monochromatic structure of the atmosphere at different pressure levels, thus simulating monochromatic spectral integration at a fraction of the line-by-line computing cost. The k distribution approach also permits accurate modeling of overlapping absorption by different atmospheric gases and accurate treatment of nongray absorption in multiple scattering media. It is shown that the correlated k distribution method is capable of achieving numerical accuracy to within 1 percent of cooling rates obtained with line-by-line calculations throughout the troposphere and most of the stratosphere.

Lacis, Andrew A.↗
NASA NTRS2022

Mapping Phyllosilicates on the Asteroid Bennu Using Thermal Emission Spectra and Machine Learning Model Applications

Bennu, the target of the OSIRIS-REx mission, is an asteroid with compositions analogous to low petrologic type CI, CM, CR, and/or ungrouped carbonaceous chondrites. Asteroids like Bennu provide information about the building blocks of the early Solar System. Analysis of the mid-infrared remote sensing data informs mineral quantification. We apply a phyllosilicate specific model, developed by Breitenfeld et al. (2021) that distinguishes between Mg and Fe serpentines, to Baseball Diamond 1 (BBD1), Equatorial Station 3 (EQ3), and Touch-And-Go OSIRIS-REx Thermal Emission Spectrometer data. The average total phyllosilicate predictions are 73 (BBD1) and 72 vol% (EQ3). We observe higher Fe-cronstedtite and lower Mg-rich serpentine content in the equatorial region of Bennu than average. Mid-infrared spectral variability may be explained by sorting effects through mass movement.

Bennu↗
NASA NTRS1979

Theoretical models of interstellar shocks. I - Radiative transfer and UV precursors

Theoretical models of interstellar radiative shocks are constructed, with special attention to the transfer of ionizing radiation. These models are 'self-consistent' in the sense that the emergent ionizing radiation (the UV precursor) is coupled with the ionization state of H, He, and the metals in the preshock gas. For shock velocities of at least 110 km/s the shocks generate sufficient UV radiation for complete preionization of H and He, the latter to He(+). At lower velocities the preionization can be much smaller, with important consequences for the cooling function, the shock structure, and the emission. For models with shock velocities of 40 to 130 km/s the intensities of the strongest emission lines in the UV, optical, and infrared are tabulated, as well as postshock column densities of metal ions potentially observable by UV absorption spectroscopy. Possible applications to supernova remnants and high-velocity interstellar gas are assessed.

Shull, J. M.↗
NASA NTRS1988

The outer atmospheres and winds of T Tau and RU Lupi

Emission line fluxes were used to establish the emission measure distribution for T Tau and RU Lupi. Intersystem lines are used to constrain the electron density in the emitting regions. These are compared with the results of Alfven wave driven wind models. Observed emission line widths and absorption components formed in the stellar winds are also compared with the theoretical predictions. It is concluded that the transition region lines are not formed in the wind and that the large widths of these emission lines are caused by nonthermal turbulent motions. However, the intersystem lines formed at Te less than or = 10,000 K indicate the presence of a lower density region, identified with the wind. Alfven-wave driven winds, with T max = 10,000 K long damping lengths, and high initial wave amplitudes may be able to account for the observed characteristics.

Jordan, C.↗
NASA NTRS1990

PW Vul: A classical nova with nearly solar abundances

Ultraviolet and optical spectrophotometric data are combined in order to determine the physical parameters in the expanding shell of Nova PW Vul 1984. Ultraviolet data obtained with the International Ultraviolet Explorer (IUE) satellite from August 2, 1984 (a few days after discovery) until it became too faint to study with the satellite is presented. The last IUE exposure was obtained in June 1988 but it was continually followed with ground based optical telescopes. A plot showing the variation of electron density and temperature as a function of time is presented. Analysis of the emission line intensities show that the abundances of this very slow nova are solar for helium, carbon, and oxygen while nitrogen is 50 times solar. The CLOUDY code of Ferland is used to model the emission line intensities and find good agreement with the observations. Plots representative of IUE and optical spectra are displayed.

Saizar, P.↗
NASA NTRSDate not supplied

Modeling and Observations of OH UV-emissions in the Lunar Exosphere

The discovery of water on the Moon has led to several questions about lunar water’s origin, evolution, and total amount. One of the technique used to better understand the origin of the water, notably by the NASA LADEE/UVS instrument, is the observation of OH fluorescence. However, to better interpret the data, it is important to understand the processes leading to that emission. We present an application of the Aeroplanets model to the simulation of the OH emissions from the solar fluorescence and the dissociation of H2O from photon and electron impact in function of the solar activity. We applied the model to several cases of Lunar exosphere affected or not by meteor impacts that are known to release water in the exosphere.We show how we can retrieve the amount of OH and H2O on the line of sight of the different instruments and how the solar activity can affect that retrieval.

Guillaume Gronoff↗
NASA NTRS1981

The X-ray structure of Centaurus A

The Einstein X-ray observatory imaging detectors have found X-ray emission associated with several components of the nearby radio galaxy Cen A = NGC 5128: (1) the compact nucleus; (2) an X-ray jet pointed toward the NE radio lobes; (3) the middle NE radio lobe; (4) the disk or dust lane; and (5) diffuse emission extending several arcmin around the nucleus. The intensity of the nucleus changed by a factor of seven over six months. The X-ray jet is considered in terms of thermal, inverse Compton, and synchrotron models. The emission of the NE radio lobe is greater than that expected from inverse Compton or synchrotron processes. Two ridges of emission are found along each edge of the dust lane, within several arcmin of the nucleus. The diffuse X-ray component has a luminosity which is too high to be due to bulge population X-ray sources, but which may be produced by main sequence stars under appropriate circumstances.

Feigelson, E. D.↗
NASA NTRS1994

The ground-based measurement of ozone in the 9.6 micron band

Stratospheric ozone has been measured using infrared emission spectroscopy of the 9.6 micron band. Thermal emission spectra of the zenith sky were measured from the ground. The spectra show the presence of the 1020 cm(exp -1) spectral feature of ozone on clear days. The spectra were measured with a BOMEM model 100 emission interferometer with a resolution of 4 cm(exp -1). The feature corresponds to a mixing ratio of 5 ppmv if the ozone is assumed to be uniformly distributed in the stratosphere from 25 to 35 km. The development of an inversion algorithm to derive the altitude distribution of the ozone in 3 layers is described. These measurements have been conducted from Peterborough, Ontario since June 1991; further investigations are planned to study the comparisons with Dobson and LIDAR ozone measurements.

Evans, W. F. J.↗