Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

MATCHING THE SPECTRAL ENERGY DISTRIBUTION AND p-MODE OSCILLATION FREQUENCIES OF THE RAPIDLY ROTATING DELTA SCUTI STAR {alpha} OPHIUCHI WITH A TWO-DIMENSIONAL ROTATING STELLAR MODEL

Spectral energy distributions are computed using two-dimensional (2D) rotating stellar models and non-LTE plane-parallel model atmospheres. A rotating, 2D stellar model has been found that matches the observed ultraviolet and visible spectrum of {alpha} Oph. The SED match occurs for the interferometrically deduced surface shape and inclination, and is different from the SED produced by spherical models. The p-mode oscillation frequencies in which the latitudinal variation is modeled by a linear combination of eight Legendre polynomials were computed for this model. The five highest and seven of the nine highest amplitude modes show agreement between computed axisymmetric, equatorially symmetric mode frequencies and the mode frequencies observed by the Microvariability and Oscillations of Stars satellite (MOST) to within the observational error. Including nonaxisymmetric modes up through |m| = 2, and allowing for the possibility that the eight lowest amplitude modes could be produced by modes that are not equatorially symmetric, matches for 24 out of the 35 MOST modes to within the observational error and another eight modes to within twice the observational error. The remaining three observed modes can be fitted within 4.2 times the observational error, but even these may be fitted to within the observational error if the criteria for computed modes are expanded.

79 ASTRONOMY AND ASTROPHYSICS↗

Study of the film boiling heat transfer and two-phase flow interface behavior using image processing

Here, in this study, based on a small-scale quench test facility, the two-phase flow interface behavior during quench transients is visualized and analyzed utilizing an image processing framework. The high-fidelity experimental results obtained for two-phase flow in the current framework can support various studies both in the time domain and in the frequency domain. In particular, visualization of the data obtained from different heating surfaces under different test conditions are used to perform a full-scale transient 2-D vapor film reconstruction. The liquid-vapor interface variations in various heat transfer regimes as well as at the initial film breakup point can be directly obtained through the processed data. Moreover, the temporal variation of the interfacial wave frequency approaching quench is investigated in detail. Based on the high-resolution data obtained for the liquid-vapor interface, the detailed phase velocity and temperature profiles are obtained through theoretic analysis, based on which the film boiling heat transfer coefficient (HTC) can be determined. In addition, an improved film boiling HTC model is developed considering the effects of wall superheat, liquid subcooling temperature, vapor film thickness as well as fluid properties. The model is found to predict film boiling HTC well within 15% error.

42 ENGINEERING↗

Dynamic capacitor having a peripherally driven element and system incorporating the same

A capacitor in which one plate or electrode element is vibratable to achieve a variation in capacitance is described. The capacitor includes two spaced stationary elements. The third element is supported at its center and in the form of a thin diaphragm which is vibrated at its inherent mechanical resonant frequency to achieve a corresponding variation in capacitance between one of the stationary elements and the vibrating diaphragm.

Goldstein, C. S.↗

IS THE CURRENT LACK OF SOLAR ACTIVITY ONLY SKIN DEEP?

The Sun is a variable star whose magnetic activity and total irradiance vary on a timescale of approximately 11 years. The current activity minimum has attracted considerable interest because of its unusual duration and depth. This raises the question: what might be happening beneath the surface where the magnetic activity ultimately originates? The surface activity can be linked to the conditions in the solar interior by the observation and analysis of the frequencies of the Sun's natural seismic modes of oscillation-the p modes. These seismic frequencies respond to changes in activity and are probes of conditions within the Sun. The Birmingham Solar-Oscillations Network (BiSON) has made measurements of p-mode frequencies over the last three solar activity cycles, and so is in a unique position to explore the current unusual and extended solar minimum. We show that the BiSON data reveal significant variations of the p-mode frequencies during the current minimum. This is in marked contrast to the surface activity observations, which show little variation over the same period. The level of the minimum is significantly deeper in the p-mode frequencies than in the surface observations. We observe a quasi-biennial signal in the p-mode frequencies, which has not previously been observed at mid- and low-activity levels. The stark differences in the behavior of the frequencies and the surface activity measures point to activity-related processes occurring in the solar interior, which are yet to reach the surface, where they may be attenuated.

99 GENERAL AND MISCELLANEOUS↗

Structural and Dielectric Properties of Rare Earth Doped Lithium Nanoferrites for Sensing Applications

Nowadays it is the hot topic to analyze the behavior of different materials towards gasses so that they can be used for sensing purpose. Ferrites specifically lithium ferrites show very good response to gasses present in the environment. Lithium ferrite doped with Gd (Li{sub 0.5}Fe{sub 2.475}Gd{sub 0.025}O{sub 4}) was selected for this purpose. Sample was synthesized by simplified sol-gel technique. After that, pellets were formed and sintered at different temperatures. Spinel cubic phase was observed in x-ray diffraction (XRD). It is noted that by increasing sintering temperature, results slightly decrease in lattice constant. Scanning electron microscopy (SEM) was used to study the surface morphology of the samples. It was observed that particles were spherical in shape. AC electrical properties were studied at room temperature in the frequency range of 20 Hz to 3 MHz. AC electrical conductivity and dielectric constant decreased with the increase in sintering temperature. The maximum conductivity was observed in the sample that was sintered at temperature of 700 {sup ∘}C. Significant variation in electrical response with frequency made these samples suitable for sensing applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Variational nonlinear WKB in the Eulerian frame

Nonlinear WKB is a multiscale technique for studying locally plane-wave solutions of nonlinear partial differential equations (PDEs). Its application comprises two steps: (1) replacement of the original PDE with an extended system separating the large scales from the small and (2) reduction of the extended system to its slow manifold. In the context of variational fluid theories with particle relabeling symmetry, nonlinear WKB in the mean Eulerian frame is known to possess a variational structure. This much has been demonstrated using, for instance, the theoretical apparatus known as the generalized Lagrangian mean. On the other hand, the variational structure of nonlinear WKB in the conventional Eulerian frame remains mysterious. By exhibiting a variational principle for the extended equations from step (1) above, here we demonstrate that nonlinear WKB in the Eulerian frame is in fact variational. Remarkably, the variational principle for the extended system admits loops of relabeling transformations as a symmetry group. Noether’s theorem therefore implies that the extended Eulerian equations possess a family of circulation invariants parameterized by S 1 . As an illustrative example, we use our results to systematically deduce a variational model of high-frequency acoustic waves interacting with a larger-scale compressible isothermal flow.

97 MATHEMATICS AND COMPUTING↗

Neptune radio emission in dipole and multipole magnetic fields

We study Neptune's smooth radio emission in two ways: we simulate the observations and we then consider the radio effects of Neptune's magnetic multipoles. A procedure to deduce the characteristics of radio sources observed by the Planetary Radio Astronomy experiment minimizes limiting assumptions and maximizes use of the data, including quantitative measurement of circular polarization. Study of specific sources simulates time variation of intensity and apparent polarization of their integrated emission over an extended time period. The method is applied to Neptune smooth recurrent emission (SRE). Time series are modeled with both broad and beamed emission patterns, and at two frequencies which exhibit different time variation of polarization. These dipole-based results are overturned by consideration of more complex models of Neptune's magnetic field. Any smooth emission from the anticipated auroral radio source is weak and briefly observed. Dominant SRE originates complex fields at midlatitude. Possible SRE source locations overlap that of 'high-latitude' emission (HLE) between +(out) and -(in) quadrupoles. This is the first identification of multipolar magnetic structure with a major source of planetary radio emission.

Sawyer, C. B.↗

Effects of cumulus parameterization closures on simulations of summer precipitation over the continental United States

This study examines the effects of five cumulus closure assumptions on simulations of summer precipitation in the continental U.S. by utilizing an ensemble cumulus parameterization (ECP) that incorporates multiple alternate closure schemes into a single cloud model formulation. Results demonstrate that closure algorithms significantly affect the summer mean, daily frequency and intensity, and diurnal variation of precipitation, with strong regional dependence. Overall, the vertical velocity (W) closure produces the smallest summer mean biases, while the moisture convergence (MC) closure most realistically reproduces daily variability. Both closures have advantages over others in simulating U.S. daily rainfall frequency distribution, though both slightly overestimate intense rain events. The MC closure is superior at capturing summer rainfall amount, daily variability, and heavy rainfall frequency over the Central U.S., but systematically produces wet biases over the North American Monsoon (NAM) region and Southeast U.S., which can be reduced by using the W closure. The instability tendency (TD) and the total instability adjustment (KF) closures are better at capturing observed diurnal signals over the Central U.S. and the NAM, respectively. The results reasonably explain the systematic behaviors of several major cumulus parameterizations. A preliminary experiment combining two optimal closures (averaged moisture convergence and vertical velocity) in the ECP scheme significantly reduced the wet (dry) biases over the Southeast U.S. in the summer of 1993 (2003), and greatly improved daily rainfall correlations over the NAM. Further improved model simulation skills may be achieved in the future if optimal closures and their appropriate weights can be derived at different time scales based on specific climate regimes.

Qiao, Fengxue↗

In-situ piezoresponse force microscopy cantilever mode shape profiling

The frequency-dependent amplitude and phase in piezoresponse force microscopy (PFM) measurements are shown to be a consequence of the Euler-Bernoulli (EB) dynamics of atomic force microscope (AFM) cantilever beams used to make the measurements. Changes in the cantilever mode shape as a function of changes in the boundary conditions determine the sensitivity of cantilevers to forces between the tip and the sample. Conventional PFM and AFM measurements are made with the motion of the cantilever measured at one optical beam detector (OBD) spot location. A single OBD spot location provides a limited picture of the total cantilever motion, and in fact, experimentally observed cantilever amplitude and phase are shown to be strongly dependent on the OBD spot position for many measurements. In this work, the commonly observed frequency dependence of PFM response is explained through experimental measurements and analytic theoretical EB modeling of the PFM response as a function of both frequency and OBD spot location on a periodically poled lithium niobate sample. One notable conclusion is that a common choice of OBD spot location—at or near the tip of the cantilever—is particularly vulnerable to frequency dependent amplitude and phase variations stemming from dynamics of the cantilever sensor rather than from the piezoresponse of the sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microwave measurements of the high magnetic field vortex motion pinning parameters in Nb$_3$Sn

The high frequency vortex motion in Nb3Sn was analyzed in this work up to 12 T. We used a dielectric loaded resonator tuned at 15 GHz to evaluate the surface impedance Z of a Nb3Sn bulk sample (24.8 at.%Sn). From the field induced variation of Z, the high frequency vortex parameters (the pinning constant k p , the depinning frequency ν p and the flux flow resistivity ρ ff ) were obtained over a large temperature and field range; their field and temperature dependencies were analyzed. Comparison with other superconducting materials shows that high frequency applications in strong magnetic fields are also feasible with Nb3Sn. In the present work, we report the first measurements about the microwave response in Nb3Sn in strong magnetic fields.

Alimenti, Andrea↗

AAFE man-made noise experiment project. Volume 1: Introduction experiment definition and requirements

An experiment was conducted to measure and map the man-made radio frequency emanations which exist at earth orbital altitudes. The major objectives of the program are to develop a complete conceptual experiment and developmental hardware for the collection and processing of data required to produce meaningful statistics on man-made noise level variations as functions of time, frequency, and geographic location. A wide dispersion measurement receiver mounted in a spacecraft operating in a specialized orbit is used to obtain the data. A summary of the experiment designs goals and constraints is provided. The recommended orbit for the spacecraft is defined. The characteristics of the receiver and the antennas are analyzed.

Source record↗

Extension of the Time-Spectral Approach to Overset Solvers for Arbitrary Motion

Forced periodic flows arise in a broad range of aerodynamic applications such as rotorcraft, turbomachinery, and flapping wing configurations. Standard practice involves solving the unsteady flow equations forward in time until the initial transient exits the domain and a statistically stationary flow is achieved. It is often required to simulate through several periods to remove the initial transient making unsteady design optimization prohibitively expensive for most realistic problems. An effort to reduce the computational cost of these calculations led to the development of the Harmonic Balance method [1, 2] which capitalizes on the periodic nature of the solution. The approach exploits the fact that forced temporally periodic flow, while varying in the time domain, is invariant in the frequency domain. Expanding the temporal variation at each spatial node into a Fourier series transforms the unsteady governing equations into a steady set of equations in integer harmonics that can be tackled with the acceleration techniques afforded to steady-state flow solvers. Other similar approaches, such as the Nonlinear Frequency Domain [3,4,5], Reduced Frequency [6] and Time-Spectral [7, 8, 9] methods, were developed shortly thereafter. Additionally, adjoint-based optimization techniques can be applied [10, 11] as well as frequency-adaptive methods [12, 13, 14] to provide even more flexibility to the method. The Fourier temporal basis functions imply spectral convergence as the number of harmonic modes, and correspondingly number of time samples, N, is increased. Some elect to solve the equations in the frequency domain directly, while others choose to transform the equations back into the time domain to simplify the process of adding this capability to existing solvers, but each harnesses the underlying steady solution in the frequency domain. These temporal projection methods will herein be collectively referred to as Time-Spectral methods. Time-Spectral methods have demonstrated marked success in reducing the computational costs associated with simulating periodic forced flows, but have yet to be fully applied to overset or Cartesian solvers for arbitrary motion with dynamic hole-cutting. Overset and Cartesian grid methodologies are versatile techniques capable of handling complex geometry configurations in practical engineering applications, and the combination of the Time-Spectral approach with this general capability potentially provides an enabling new design and analysis tool. In an arbitrary moving-body scenario for these approaches, a Lagrangian body moves through a fixed Eulerian mesh and mesh points in the Eulerian mesh interior to the solid body are removed (cut or blanked), leaving a hole in the Eulerian mesh. During the dynamic motion some gridpoints in the domain are blanked and do not have a complete set of time-samples preventing a direct implementation of the Time-Spectral method. Murman[6] demonstrated the Time-Spectral approach for a Cartesian solver with a rigid domain motion, wherein the hole cutting remains constant. Similarly, Custer et al. [15, 16] used the NASA overset OVERFLOW solver and limited the amount of relative motion to ensure static hole-cutting and interpolation. Recently, Mavriplis and Mundis[17] demonstrated a qualitative method for applying the Time-Spectral approach to an unstructured overset solver for arbitrary motion. The goal of the current work is to develop a robust and general method for handling arbitrary motion with the Time-Spectral approach within an overset or Cartesian mesh method, while still approaching the spectral convergence rate of the original Time-Spectral approach. The viscous OVERFLOW solver will be augmented with the new Time-Spectral algorithm and the capability of the method for benchmark problems in rotorcraft and turbomachinery will be demonstrated. This abstract begins with a brief synopsis of the Time-Spectral approach for overset grids and provides details of e current approach to allow for arbitrary motion. Model problem results in one and two dimensions are included to demonstrate the viability of the method and the convergence properties. Section IV briefly outlines the implementation into the OVERFLOW solver, and the abstract closes with a description of the benchmark test cases which will be included in the final paper.

Leffell, Joshua Isaac↗

Electron Bernstein waves and narrow band plasma waves near the electron cyclotron frequency in the near-Sun solar wind

Context. Recent studies of the solar wind sunward of 0.25 AU reveal that it contains quiescent regions, with low-amplitude plasma and magnetic field fluctuations, and a magnetic field direction similar to the Parker spiral. The quiescent regions are thought to have a more direct magnetic connection to the solar corona than other types of solar wind, suggesting that waves or instabilities in the quiescent regions are indicative of the early evolution of the solar wind as it escapes the corona. The quiescent solar wind regions are highly unstable to the formation of plasma waves near the electron cyclotron frequency (fce). Aims. We examine high time resolution observations of these waves in an effort to understand their impact on electron distribution functions of the quiescent near-Sun solar wind. Methods. High time resolution waveform captures of near-fce waves were examined to determine variations of their amplitude and frequency in time as well as their polarization properties. Results. We demonstrate that the near-fce wave intervals contain several distinct wave types, including electron Bernstein waves and extremely narrowband waves that are highly sensitive to the ambient magnetic field orientation. Using the properties of these waves, we suggest possible plasma wave mode classifications and possible instabilities that generate these waves. The results of this analysis indicate that these waves may modify the cold core of the electron distribution functions in the quiescent near-Sun solar wind.

David M. Malaspina↗

Payload Fairing Acoustic Trade Study: Fill Effect Modeling

A review of acoustic fill effect was conducted using vibroacoustic models of the NASA Space Launch System Block 1B 8.4-meter Payload Fairing. Fill effect is the term used to describe how sound pressure levels (SPLs) inside of a launch vehicle’s payload cavity change when a payload is present, compared to that of an unfilled cavity. Several vibroacoustic models with various payload shapes were developed and the deviation in output from an unfilled cavity model were compared to an analytical fill effect calculation. The analytical expression for the fill effect correction factor, known as the fill factor, is published in NASA-STD-7001B. The development and validation of the NASA fill factor is discussed to provide context for this study and define important variables including the volume fill percentage and the fairing-payload separation gap. The fill factor is reviewed from two perspectives; a global perspective which defines the volume ratio with respect to the entire fairing cavity, and a local perspective which defines the volume ratio with respect to a zone of interest dependent on the payload’s height. The global perspective was considered because it allows a decoupling of the volume ratio and fairing-payload separation gap variables. Both the global and local fill factor methods have difficulty capturing low frequency SPL because of a breakdown in the underlying assumptions of a diffuse acoustic field. Spatial variation in the pressure field at low frequency showed that axially oriented standing waves may be of concern for sensitive payload components; radial variation in SPL was found to be less significant. Further, a novel secondary derivation of the theoretical fill factor is posed for future work in which the absorption characteristics of the payload and fairing surfaces are considered. This work is supported by the NASA Glenn Research Center and the Space Launch System Payload Fairing Working Group.

Spacecraft environments↗

Impact of DER Communication Delay in AGC: Cyber-Physical Dynamic Co-Simulation: Preprint

Distributed energy resource (DER) frequency regulations are promising technologies for future grid operation. Unlike conventional generators, DERs might require open communication networks to exchange signals with control centers, possibly through DER aggregators; therefore, the impacts of the communication variations including the latency on the system frequency stability need to be investigated. This paper develops a cyber-physical dynamic simulation (CPDS) model based on the Hierarchical Engine for Large-Scale Co-Simulation (HELICS) to evaluate the impact of the communication variations, such as delays in DER frequency regulations. The feasible delay range can be obtained under different AGC parameter settings. The results show that the risk of instability generally increases with the communication delay and that the difference of AGC provided from DER and conventional generation units should be recognized when designing frequency regulation controllers.

61 RADIATION PROTECTION AND DOSIMETRY↗

Verification and validation of integrated simulation of energetic particles in fusion plasmas

Here, we report on verification and validation of linear simulations of Alf´ven eigenmodes in the current ramp phase of DIII-D L-mode discharge #159243 using gyrokinetic, gyrokinetic-MHD hybrid, and eigenvalue codes. Using a classical fast ion profile, all simulation codes find that reversed shear Alf´ven eigenmodes (RSAE) are the dominant instability. The real frequencies from all codes have a coefficient of variation of less than 5% for the most unstable modes with toroidal mode number n = 4 and 5. Due to uncertainty in the experimentally measured minimum safety factor (q min ) and the sensitivity of the RSAE’s frequency to q min , the average difference in frequency between simulated and measured is df/f = 14.7%, 22.6%, for n = 4 and 5, respectively. If qmin is adjusted slightly, within experimental errors, an agreement of within 4.5% and 3.1%, for n = 4 and 5 respectively, is found for all codes. The simulated growth rates exhibit greater variation, and simulations find that pressure gradients of thermal plasmas make a significant contribution to the growth rates. Mode structures of the dominant modes agree well among all codes. Using a calculated fast ion profile that takes into account the action of the spectrum of multiple unstable modes, a toroidal Alf´ven eigenmode (TAE) with n = 6 is found to be unstable in the outer edge, consistent with the experimental data. Variations of the real frequencies and growth rates of the TAE are slightly larger than those of the RSAE. Lastly, electron temperature fluctuations and radial phase shifts from simulations show no significant differences with the experimental data for the strong n = 4 RSAE, but significant differences for the weak n = 6 TAE. The verification and validation for the linear simulations of Alf´ven eigenmodes is the first step to determine an integrated simulation of energetic particles confinement in burning plasmas incorporating multiple physical processes with kinetic effects of both energetic and thermal particles on an equal footing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tiny sensor-transmitter can withstand extreme acceleration, gives digital output

A self-pulsing oscillator transmits a pulsed signal. The time between pulses and the frequency are controlled by two networks. Variations in the component values in each of the two networks, due to environmental changes, appear as changes in frequency and time between pulses in the transmitted signal. Such a sensor is used to measure physical magnitudes.

Mossino, R. L.↗