Results for “loop currents” — Page 41

DOE OSTI2016

Scanning SQUID susceptometers with sub-micron spatial resolution

Superconducting QUantum Interference Device (SQUID) microscopy has excellent magnetic field sensitivity, but suffers from modest spatial resolution when compared with other scanning probes. This spatial resolution is determined by both the size of the field sensitive area and the spacing between this area and the sample surface. In this paper we describe scanning SQUID susceptometers that achieve sub-micron spatial resolution while retaining a white noise floor flux sensitivity of ≈2μΦ{sub 0}/Hz{sup 1/2}. This high spatial resolution is accomplished by deep sub-micron feature sizes, well shielded pickup loops fabricated using a planarized process, and a deep etch step that minimizes the spacing between the sample surface and the SQUID pickup loop. We describe the design, modeling, fabrication, and testing of these sensors. Although sub-micron spatial resolution has been achieved previously in scanning SQUID sensors, our sensors not only achieve high spatial resolution but also have integrated modulation coils for flux feedback, integrated field coils for susceptibility measurements, and batch processing. They are therefore a generally applicable tool for imaging sample magnetization, currents, and susceptibilities with higher spatial resolution than previous susceptometers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2017

Towards sustainable agriculture: Fossil-free ammonia

We report that about 40% of our food would not exist without synthetic ammonia (NH 3 ) for fertilization. Yet, NH 3 production is energy intensive. About 2% of the world's commercial energy is consumed as fossil fuels for NH 3 synthesis based on the century-old Haber-Bosch (H.-B.) process. The state of the art and the opportunities for reducing the fossil energy footprint of industrial H.-B. NH 3 synthesis are discussed. It is shown that even a hypothetical utterly revolutionary H.-B. catalyst could not significantly reduce the energy demand of H.-B. NH 3 as this is governed by hydrogen production. Renewable energy-enabled, fossil-free NH 3 synthesis is then evaluated based on the exceptional and continuing cost decline of renewable electricity. H.-B. syngas (H 2 , N 2 ) is assumed to be produced by electrolysis and cryogenic air separation and then supplied to an existing H.-B. synthesis loop. Fossil-free NH 3 could be produced for energy costs of about $232 per tonne NH 3 without claiming any economic benefits for the avoidance of about 1.5 tonnes of CO 2 released per tonne NH 3 compared to the most efficient H.-B. implementations. Research into alternatives to the H.-B. process might be best targeted at emerging markets with currently little NH 3 synthesis capacity but significant future population growth in markets such as Africa. Reduced capital intensity, good scale-down economics, tolerance for process upsets and contamination, and intermittent operability are some desirable characteristics of NH 3 synthesis in less developed markets and for stranded resources. Lastly, processes that are fundamentally different from H.-B. may come to the fore under these specific boundary conditions.

03 NATURAL GAS↗

DOE OSTI2018

Development of a low-inductance SiC trench MOSFET power module for high-frequency application

This paper deals with the development of a low-inductance multiple-chip power module with state-of-art 1200 V SiC Trench MOSFETs for high-frequency application. Specifically, a phase-leg power module package with integrated decoupling capacitance is fabricated based on P-cell/N-cell concept, and the packaging design is discussed in detail. Dedicated double pulse test is built, and a gate driver with cross-talk suppression function is designed to support the fast switching speed operation of SiC Trench MOSFETs. The parasitic inductance and current density distribution of the power module are simulated and extracted for the purpose of voltage spike limiting. The temperature dependent static and switching characteristics of the developed module are evaluated as well, and the key differences from traditional SiC double-diffused MOS (DMOS) are identified and discussed. Based on the turn-off switching characterization results, a lumped equivalent power-loop parasitic inductance of ~6 nH is achieved for the designed power module.

Wang, Zhiqiang↗

DOE OSTI2024

Closed-loop electron-beam-induced spectroscopy and nanofabrication around individual quantum emitters

Color centers in diamond play a central role in the development of quantum photonic technologies, and their importance is only expected to grow in the near future. For many quantum applications, high collection efficiency from individual emitters is required, but the refractive index mismatch between diamond and air limits the optimal collection efficiency with conventional diamond device geometries. While different out-coupling methods with near-unity efficiency exist, many have yet to be realized due to current limitations in nanofabrication methods, especially for mechanically hard materials like diamond. Here, we leverage electron-beam-induced etching to modify Sn-implanted diamond quantum microchiplets containing integrated waveguides with a width and thickness of 280 nm and 200 nm, respectively. This approach allows for simultaneous high-resolution imaging and modification of the host matrix with an open geometry and direct writing. When coupled with the cathodoluminescence signal generated from the electron–emitter interactions, we can monitor the enhancement of the quantum emitters in real-time with nanoscale spatial resolution. The operando cathodoluminescence measurement and fabrication around single photon emitters demonstrated here provide a new foundation for the potential control of emitter–cavity interactions in integrated quantum photonics.

36 MATERIALS SCIENCE↗

DOE OSTI2021

A systems engineering framework for the optimization of food supply chains under circular economy considerations

The current linear “take-make-waste-extractive” model leads to the depletion of natural resources and environmental degradation. Circular Economy (CE) aims to address these impacts by building supply chains that are restorative, regenerative, and environmentally benign. This can be achieved through the re-utilization of products and materials, the extensive usage of renewable energy sources, and ultimately by closing any open material loops. Such a transition towards environmental, economic and social advancements requires analytical tools for quantitative evaluation of the alternative pathways. Here, in this work, we present a novel CE system engineering framework and decision-making tool for the modeling and optimization of food supply chains. First, the alternative pathways for the production of the desired product and the valorization of wastes and by-products are identified. Then, a Resource-Task-Network representation that captures all these pathways is utilized, based on which a mixed-integer linear programming model is developed. This approach allows the holistic modeling and optimization of the entire food supply chain, taking into account any of its special characteristics, potential constraints as well as different objectives. Considering that typically CE introduces multiple, often conflicting objectives, we deploy here a multi-objective optimization strategy for trade-off analysis. A representative case study for the supply chain of coffee is discussed, illustrating the steps and the applicability of the framework. Single and multi-objective optimization formulations under five different coffee-product demand scenarios are presented. The production of instant coffee as the only final product is shown to be the least energy and environmental efficient scenario. On the contrary, the production solely of whole beans sets a hypothetical upper bound on the optimal energy and environmental utilization. In both problems presented, the amount of energy generated is significant due to the utilization of waste generated for the production of excess energy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2022

Low Voltage Network Protection Utility Workshop (Summary and Next Steps)

Increased penetration of Distributed Energy Resources and microgrids have fundamentally changed the operation al characteristics of Low Voltage (LV) network systems. Current LV network protection philosophy and practice are due for a significant re vamp to keep up with changing operating conditions. This workshop invites four of the major LV network users in the US to discuss the challenges they face today and the new technologies they have been experimenting with in light of this workshop discussion, use cases for further hardware-in-the-loop testing efforts are proposed to evaluate new LV network protection solutions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2018

A novel chemical looping partial oxidation process for thermochemical conversion of biomass to syngas

The Biomass-to-Syngas (BTS) chemical looping process is an advanced thermochemical biomass conversion process for the production of sustainable fuels and chemicals. The BTS process is novel in that it converts biomass feedstock to high purity syngas with adjustable H 2 :CO molar ratio without needing an air separation unit (ASU), a tar reformer, a steam reformer, or a water-gas-shift (WGS) reactor. In the BTS process, biomass feedstock is partially oxidized to produce syngas by oxygen carriers in a reducer that is operated in a co-current gas-solid moving bed contact mode. The reduced oxygen carriers are regenerated in a fluidized bed combustor via the oxidation reaction with air. The BTS process uses the iron-titanium composite metal oxide (ITCMO) material as the oxygen carrier, which is capable of cracking the volatiles produced in biomass pyrolysis as well as regulating the syngas composition. The co-current moving bed reducer eliminates back-mixing, channeling, or bypassing of solid and gas reactants, resulting in a syngas composition that is close to the thermodynamic equilibrium. In this paper, the rationale of a successful BTS process is discussed along with the thermodynamic characteristics of the ITCMO oxygen carrier, that can effectively react with a woody biomass feedstock, analyzed based on an ASPEN Plus model. Bench scale moving bed reducer experiments are presented, indicating the conversion of wood pellets to syngas with a H 2 :CO ratio of 2, which is suitable for methanol or liquid fuel synthesis. The gas and solid composition produced in the bench scale reducer matches the prediction from the ASPEN Plus thermodynamic model. Furthermore, this model is further used to analyze the performance of the BTS process under autothermal conditions for methanol production, with a comparison with a baseline indirectly heated gasification process.

09 BIOMASS FUELS↗

DOE OSTI2021

ARIES: Advanced Research on Integrated Energy Systems Research Plan

The Advanced Research on Integrated Energy Systems (ARIES) platform is one of the most powerful research environments anywhere for addressing the speed and scale of change on power systems. This research plan details ARIES capabilities, current and upcoming, and how they relate to objectives for advanced energy systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2023

Comparing Parallel Plastic‐to‐X Pathways and Their Role in a Circular Economy for PET Bottles

Abstract The United States generates the most plastic waste of any country and is a top contributor to global plastic pollution. Multiple end‐of‐life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different lifetimes and utilities. Herein, they present a material flow model equipped with consequential life cycle assessment, cost analysis, and a plastic circularity indicator that considers product quality and lifetime. The model is used to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) bottle mechanical downcycling to lower‐quality resin, closed‐loop glycolysis to food‐grade PET, upcycling to glass fiber‐reinforced plastic, and conversion to non‐plastic products (electricity, oil) on a United States economy‐wide basis for the year 2020. A brute force algorithm suggests that a combination of 68% glycolysis, 11% mechanical recycling, 6% upcycling, 9% landfilling, and 5% incineration can minimize the cost and GHG emissions and maximize the circularity of the current PET economy. However, uncertainty around transportation distances, materials recovery facility efficiencies, and recycling yields can result in different “optimal” pathway mixes. This flexible framework enables informed decision‐making to move toward a cost‐ and environment‐conscious circular economy for plastic.

09 BIOMASS FUELS↗

DOE OSTI2023

Wake up and retention in zinc magnesium oxide ferroelectric films

Zn 0.64 Mg 0.36 O (ZMO) is a newly discovered ferroelectric oxide with the wurtzite structure. Epitaxial Zn 0.64 Mg 0.36 O films from 0.036 to 0.5 μm in thickness are grown on Pt/sapphire with the crystallographic c-axis out of plane. At room temperature, the remanent polarization is ~80 μC/cm 2 and the coercive field is ~3 MV/cm. The coercive field is strongly temperature dependent up to 240 °C with a pseudo-activation energy of 23 ± 0.3 meV, suggesting that polarization reversal occurs through an extrinsic process such as domain wall motion. ZMO films can be woken up in 20 electric field cycles on driving near the coercive field; they wake up in a single loop at fields in excess of 4 MV/cm. A thermally activated fluid imprint process, with a pseudo-activation energy of 67 ± 8 meV, enlarges the coercive field by several hundred kV cm –1 after switching the polarization. Additionally, ZMO films exhibit excellent retention characteristics; no reduction in the polarization is observed up to 1000 h from room temperature to 200 °C bakes. Here, this current early generation of ZMO films can survive several thousand switching cycles before dielectric breakdown occurs.

36 MATERIALS SCIENCE↗

DOE OSTI2019

LCLS-II cavity higher order modes coupler tuning optimization and challenges at Jefferson Lab

The Thomas Jefferson National Accelerator Facility is currently engaged, along with several other Department of Energy (DOE) national laboratories, in the Linac Coherent Light Source II project (LCLS II) - a new XFEL linac based on 1.3GHz superconducting linear accelerator. Half of the LCLS-II cryomodules are being produced at Jefferson Lab, other half is made at Fermilab. Each cryomodule contains eight 9-cell cavities with two Higher Order Modes (HOM) loop couplers operating at 1.3 GHz. This paper summarizes the HOM filter tuning challenges at Jefferson Lab and describes optimization of the procedure for a 9-cell Tesla type cavity and its integration into a cryomodule production line.

Solopova, Anna D.↗

DOE OSTI2016

A Statistical Testing Approach for Quantifying Software Reliability; Application to an Example System

The U.S. Nuclear Regulatory Commission (NRC) encourages the use of probabilistic risk assessment (PRA) technology in all regulatory matters, to the extent supported by the state-of-the-art in PRA methods and data. Although much has been accomplished in the area of risk-informed regulation, risk assessment for digital systems has not been fully developed. The NRC established a plan for research on digital systems to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems in the PRAs of nuclear power plants (NPPs), and (2) incorporating digital systems in the NRC's risk-informed licensing and oversight activities. Under NRC's sponsorship, Brookhaven National Laboratory (BNL) explored approaches for addressing the failures of digital instrumentation and control (I and C) systems in the current NPP PRA framework. Specific areas investigated included PRA modeling digital hardware, development of a philosophical basis for defining software failure, and identification of desirable attributes of quantitative software reliability methods. Based on the earlier research, statistical testing is considered a promising method for quantifying software reliability. This paper describes a statistical software testing approach for quantifying software reliability and applies it to the loop-operating control system (LOCS) of an experimental loop of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2017

Investigation of Plasmas Having Complex, Dynamic Evolving Morphology

Three different types of plasmas have been investigated using both experimental and theoretical methods. The first type of plasma is dense, highly ionized, governed by magnetohydrodynamics, and highly dynamic. This plasma is relevant to solar coronal loops, astrophysical jets, and other situations where strong magnetic forces act on the plasma. A well-diagnosed laboratory experiment creates a magnetohydrodynamically driven highly collimated plasma jet. This jet undergoes a kink instability such that it rapidly develops a corkscrew shape. The kink causes lateral acceleration of the jet, and this lateral acceleration drives a Rayleigh-Taylor instability that in turn chokes the current flowing in the jet and causes a magnetic reconnection. The magnetic reconnection causes electron and ion heating as well as emission of whistler waves. This entire sequence of events has been observed, measured in detail, and related to theoretical models. The second type of plasma is a transient rf-produced plasma used as a seed plasma for the magnetohydrodynamic experiments described above. Detailed atomic physics ionization processes have been investigated and modeled. The third type of plasma that has been studied is a dusty plasma where the dust particles are spontaneously growing ice grains. The rapid growth of the ice grains to large size and their highly ordered alignment has been investigated as well as collective motion of the ice grains, including well-defined flows on the surface of nested toroids. In addition to the experimental work described above, several related theoretical models have been developed, most notably a model showing how a complex interaction between gravity and magnetic fields on extremely weakly ionized plasma in an accretion disk provides an electric power source that can drive astrophysical jets associated with the accretion disk. Eighteen papers reporting this work have been published in a wide variety of journals.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Towards a Circular Economy for PET Bottles in the US

The United States generates the most plastic waste of any country. Along with that GHG emissions from the global plastic economy are expected to increase to 15% of the global carbon budget by 2050. It is imperative that plastic recycling is made a reality to reduce both plastic pollution in the environment and GHG emissions. A portfolio of end-of-life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different utility and lifetime. Plastic use reduction, reuse and recycling are thus increasingly important, but making informed policy and research decisions within this space can be challenging given the diverse range of available solutions. The novel analysis framework, Plastic Parallel Pathways Platform (4P) has been equipped with consequential life cycle assessment, techno-economic analysis, and a plastic circularity indicator to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) down-cycling to lower-quality resin, closed-loop recycling to food-grade PET bottles, up-cycling to fiber-reinforced plastic (FRP), and conversion to non-plastic products (electricity, oil) on a United States economy-wide basis. Integrating system dynamics into this robust plastics model that already incorporates techno-economics, circularity, and environmental impacts will enable identification of key bottlenecks between manufacturers, waste sorters, and reclaimers that currently prevent rapid decarbonization of the plastics economy. System dynamics (SD) explore the evolution of activities and technologies based on changed macro parameters such as plastic demand and supply, market shifts, and cross-sectoral interactions. This project particularly aims to explore the interplay between, waste collection, plastic waste sorting, recycling, and manufacturing, as well as the effect of plastic bale quality and plastic reuse initiatives on the surrounding process stages. This functionality will facilitate combinatory analysis in which a portfolio of end-of-life pathways are assessed simultaneously, with the exact makeup of that portfolio affected by parameters such as technology scales, resource constraints, and waste mitigation efforts. Integrating SD with the 4P framework enables analyzing the effect of increased revenue and reinvestment into improving process efficiencies, sorting and collection quantities. Through that, market effects of increased recycled resin availability can be studied for the plastics systems model for the US. The results will help identify technical or economic bottlenecks that currently limit efforts to decarbonize the U.S. plastics economy.

circular economy↗

DOE OSTI2024

Towards a Circular Economy for PET Bottles in the U.S. - 4P Model

The United States generates the most plastic waste of any country. Along with that GHG emissions from the global plastic economy are expected to increase to 15% of the global carbon budget by 2050. It is imperative that plastic recycling is made a reality to reduce both plastic pollution in the environment and GHG emissions. A portfolio of end-of-life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different utility and lifetime. Plastic use reduction, reuse and recycling are thus increasingly important, but making informed policy and research decisions within this space can be challenging given the diverse range of available solutions. The novel analysis framework, Plastic Parallel Pathways Platform (4P) has been equipped with consequential life cycle assessment, techno-economic analysis, and a plastic circularity indicator to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) down-cycling to lower-quality resin, closed-loop recycling to food-grade PET bottles, up-cycling to fiber-reinforced plastic (FRP), and conversion to non-plastic products (electricity, oil) on a United States economy-wide basis. Integrating system dynamics into this robust plastics model that already incorporates techno-economics, circularity, and environmental impacts will enable identification of key bottlenecks between manufacturers, waste sorters, and reclaimers that currently prevent rapid decarbonization of the plastics economy. System dynamics (SD) explore the evolution of activities and technologies based on changed macro parameters such as plastic demand and supply, market shifts, and cross-sectoral interactions. This project particularly aims to explore the interplay between, waste collection, plastic waste sorting, recycling, and manufacturing, as well as the effect of plastic bale quality and plastic reuse initiatives on the surrounding process stages. This functionality will facilitate combinatory analysis in which a portfolio of end-of-life pathways are assessed simultaneously, with the exact makeup of that portfolio affected by parameters such as technology scales, resource constraints, and waste mitigation efforts. Integrating SD with the 4P framework enables analyzing the effect of increased revenue and reinvestment into improving process efficiencies, sorting and collection quantities. Through that, market effects of increased recycled resin availability can be studied for the plastics systems model for the US. The results will help identify technical or economic bottlenecks that currently limit efforts to decarbonize the U.S. plastics economy.

carbon↗

DOE OSTI2024

Towards a Circular Economy for PET Bottles in the U.S. - 4P Framework

The United States generates the most plastic waste of any country. Along with that GHG emissions from the global plastic economy are expected to increase to 15% of the global carbon budget by 2050. It is imperative that plastic recycling is made a reality to reduce both plastic pollution in the environment and GHG emissions. A portfolio of end-of-life strategies must be implemented to minimize environmental impacts and retain valuable plastic material, but it is challenging to compare options that generate products with different utility and lifetime. Plastic use reduction, reuse and recycling are thus increasingly important, but making informed policy and research decisions within this space can be challenging given the diverse range of available solutions. The novel analysis framework, Plastic Parallel Pathways Platform (4P) has been equipped with consequential life cycle assessment, techno-economic analysis, and a plastic circularity indicator to estimate the greenhouse gas (GHG) emissions, circularity, and cost of polyethylene terephthalate (PET) down-cycling to lower-quality resin, closed-loop recycling to food-grade PET bottles, up-cycling to fiber-reinforced plastic (FRP), and conversion to non-plastic products (electricity, oil) on a United States economy-wide basis. Integrating system dynamics into this robust plastics model that already incorporates techno-economics, circularity, and environmental impacts will enable identification of key bottlenecks between manufacturers, waste sorters, and reclaimers that currently prevent rapid decarbonization of the plastics economy. System dynamics (SD) explore the evolution of activities and technologies based on changed macro parameters such as plastic demand and supply, market shifts, and cross-sectoral interactions. This project particularly aims to explore the interplay between, waste collection, plastic waste sorting, recycling, and manufacturing, as well as the effect of plastic bale quality and plastic reuse initiatives on the surrounding process stages. This functionality will facilitate combinatory analysis in which a portfolio of end-of-life pathways are assessed simultaneously, with the exact makeup of that portfolio affected by parameters such as technology scales, resource constraints, and waste mitigation efforts. Integrating SD with the 4P framework enables analyzing the effect of increased revenue and reinvestment into improving process efficiencies, sorting and collection quantities. Through that, market effects of increased recycled resin availability can be studied for the plastics systems model for the US. The results will help identify technical or economic bottlenecks that currently limit efforts to decarbonize the U.S. plastics economy.

circular economy↗

DOE OSTI2020

Recovery of High Value Anode Materials for a Closed Loop Li-ion Battery Recycling Process (Final Report)

Battery Resourcers’ goal with this Small Business Innovative Research Phase 1 project was to produce high quality and high purity graphite generated from its Li-ion battery recycling technology. Battery Resourcers’ technology recovers cathode material from a broad spectrum of Li-ion battery regardless of size, shape or chemistry. In Battery Resourcers existing model, the graphite is recovered to be used as a reductant and therefore the battery materials cost or recycling cost is not lowered by the recovery of the graphite. Currently, Battery Resourcers is piloting its lithium ion battery recycling process and the recovered LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111) or LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC111) cathode materials have shown that they can outperform existing commercial NMC111 cathode materials while being produced at a projected lower cost. Battery Resourcers and its subcontractor WPI have demonstrated the same success with the recovered graphite for anode materials. The success of this award will enable Battery Resourcers offer lowest cost anode materials while reducing the carbon footprint of the battery industry. This will potentially lower the cost of EV by lowering the upfront cost of the battery and the end of life disposal costs. The technical objectives of this Phase 1 research project are to purify the recovered graphite from Battery Resourcers leaching process and demonstrate it is viable to be used in new electric vehicle lithium ion batteries. This project demonstrated that Battery Resourcers can recover graphite with less than 2% impurities. To separate the graphite from other materials Battery Resourcers will employed new filtering techniques and chemical processing methods.

25 ENERGY STORAGE↗

DOE OSTI2018

Buoyancy-driven air flow within plenum-to-plenum facility down-comer channel

Reliable measurements of thermal and velocity fields were experimentally investigated under different natural circulation intensities in a dual channel facility designed and developed with a representative geometry of prismatic modular reactor core. Experiments were conducted under steady state conditions to obtain statistically stationary time series signals of temperature and velocity. Insignificant radial temperature variation was observed along the down-comer channel implying that the majority of supplied heat is removed through the upper plenum. Velocity results obtained emphasize the delicate nature of natural circulation phenomena in terms of flow destabilization, and recirculation penetration length. Observed air velocity distribution reveals that downward velocity is proportional to the extent of cooling applied to the setup. The calculated values of the dimensionless group Froude number ( Fr ) in the range of 2 to 10 indicate that air is dominated by momentum and is exiting the channel as a jet. Quantification of turbulent intensities implies that flow destabilization is noticeable along the down-comer channel particularly for the case of high cooling intensity. For 5 °C cooling water temperature, turbulent intensity ($v$ rms / $v$) peaks at the mid-channel (z/L = 0.5) reaching a value of 0.5. This value of turbulent intensity is much higher than the inlet (z/L = 0.96) and outlet (z/L = 0.04) turbulent intensities of 0.2 and 0.06 respectively. This destabilization is because of the flow reversal and heat conduction effects through stainless steel flanges connecting both channels. In conclusion, current results provide detailed velocity and temperature variation which can be useful for validating computational fluid dynamics codes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗