Search NASA⌕ Search

SEARCH · Search NASA

Results for “material variability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Slurry-pressing consolidation of silicon nitride

A baseline slurry-pressing method for a silicon nitride material is developed. The Si3N4 composition contained 5.8 wt percent SiO2 and 6.4 wt percent Y2O3. Slurry-pressing variables included volume percent solids, application of ultrasonic energy, and pH. Twenty vol percent slurry-pressed material was approximately 11 percent stronger than both 30 vol percent slurry-pressed and dry-pressed materials. The Student's t-test showed the difference to be significant at the 99 percent confidence level. Twenty volume percent (300 h) slurry-pressed test bars exhibited strengths as high as 980 MPa. Large, columnar beta-Si3N4 grains caused failure in the highest strength specimens. The improved strength correlated with better structural uniformity as determined by radiography, optical microscopy, and image analysis.

Sanders, William A.↗
NASA NTRS1989

Slurry-pressing consolidation of silicon nitride

A baseline slurry-pressing method for a silicon nitride material is developed. The Si3N4 composition contained 5.8 wt percent SiO2 and 6.4 wt percent Y2O3. Slurry-pressing variables included volume percent solids, application of ultrasonic energy, and pH. Twenty vol percent slurry-pressed material was approximately 11 percent stronger than both 30 vol percent slurry-pressed and dry-pressed materials. The Student's t-test showed the difference to be significant at the 99 percent confidence level. Twenty volume percent (300 h) slurry-pressed test bars exhibited strengths as high as 980 MPa. Large, columnar beta-Si3N4 grains caused failure in the highest strength specimens. The improved strength correlated with better structural uniformity as determined by radiography, optical microscopy, and image analysis.

Sanders, William A.↗
DOE OSTI2022

Enhancing the connection between computation and experiments in electrocatalysis

Combining computational and experimental methods is a powerful approach to understand the variables that govern catalyst performance and ultimately design improved materials. However, the effectiveness of this approach rests on the strength of the relationships between calculated parameters and experimental measurements. These relationships are complicated by the intricacy and dynamic behaviour of catalytic active sites, and by the non-trivial relationship between calculated reaction energetics and observed rates. In this Perspective, we highlight opportunities to enhance the connection between computation and experiment in electrocatalysis. These include measuring the intrinsic kinetic behaviour of catalysts, creating precise models for the active site and its environment, and forming clear relationships between calculated reaction energetics and observed rates. As experimental and computational methods continue to become more powerful, clear connections between the two will maximize their utility to guide the design of efficient and selective electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Interfacial defect reduction enhances universal power law response in Mo–SiNx granular metals

Granular metals (GMs), consisting of metal nanoparticles separated by an insulating matrix, frequently serve as a platform for fundamental electron transport studies. However, few technologically mature devices incorporating GMs have been realized, in large part because intrinsic defects (e.g., electron trapping sites and metal/insulator interfacial defects) frequently impede electron transport, particularly in GMs that do not contain noble metals. Here, we demonstrate that such defects can be minimized in molybdenum–silicon nitride (Mo–SiN x ) GMs via optimization of the sputter deposition atmosphere. For Mo–SiN x GMs deposited in a mixed Ar/N 2 environment, x-ray photoemission spectroscopy shows a 40%–60% reduction of interfacial Mo-silicide defects compared to Mo–SiN x GMs sputtered in a pure Ar environment. Electron transport measurements confirm the reduced defect density; the dc conductivity improved (decreased) by 10 4 –10 5 and the activation energy for variable-range hopping increased 10×. Since GMs are disordered materials, the GM nanostructure should, theoretically, support a universal power law (UPL) response; in practice, that response is generally overwhelmed by resistive (defective) transport. Here, the defect-minimized Mo–SiN x GMs display a superlinear UPL response, which we quantify as the ratio of the conductivity at 1 MHz to that at dc, Δσ ω ⁠. Remarkably, these GMs display a Δσ ω up to 10 7 , a three-orders-of-magnitude improved response than previously reported for GMs. By enabling high-performance electric transport with a non-noble metal GM, this work represents an important step toward both new fundamental UPL research and scalable, mature GM device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Design and analysis of a segmented blade for a 50 MW wind turbine rotor

Extreme-size wind turbines face logistical challenges due to their sheer size. A solution, segmentation, is examined for an extreme-scale 50 MW wind turbine with 250 m blades using a systematic approach. Segmentation poses challenges regarding minimizing joint mass, transferring loads between segments and logistics. We investigate the feasibility of segmenting a 250 m blade by developing design methods and analyzing the impact of segmentation on the blade mass and blade frequencies. This investigation considers various variables such as joint types (bolted and bonded), adhesive materials, joint locations, number of joints and taper ratios (ply dropping). Segmentation increases blade mass by 4.1%–62% with bolted joints and by 0.4%–3.6% with bonded joints for taper ratios up to 1:10. Cases with large mass growth significantly reduce blade frequencies potentially challenging the control design. We show that segmentation of an extreme-scale blade is possible but mass reduction is necessary to improve its feasibility.

Escalera Mendoza, Alejandra S.↗
DOE OSTI2022

Formulation of PI Aerogels with 3-D Printing Applications

Polyimide-based films were produced with 3-D printing capability consisting of TDI and PMDA monomers with acrylate functionality. The polymer was synthesized using a standard condensation with diisocyanate and dianhydride heated to 95⁰C under water free conditions. This method is relatively fast, cost effective and far more synthetically simple compared to diamine condensations seen in literature. Considering how crucial proper grafting of functional groups was in hierarchy application, various formulation variables were screened. Lastly, films were produced with PI material and the physical and chemical properties were examined using microscope imaging and UV-Vis Spectroscopy. The material was proven to have relatively fast cure times (5-10 minutes) and the films were shown to have long term stability.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Multiscale Inelastic Internal State Variable Corrosion Model

We present a corrosion internal state variable (ISV) damage model based upon the integrated computational materials engineering (ICME) hierarchical multiscale paradigm. Structure–property experiments for magnesium alloys were used where the only inputs were the volume fractions of each element of the periodic table. This macroscale ISV corrosion model finds its basis in Horstemeyer’s mechanical damage model, which includes three separate ISVs for damage nucleation, growth, and coalescence, as well as Walton’s inclusion of corrosion, which introduces five new ISVs for pit nucleation, growth, and coalescence, along with general corrosion and intergranular corrosion. While Walton’s corrosion ISVs are phenomenological in nature, herein we develop a multiscale physical basis for the corrosion ISVs. The parameters for the macroscale corrosion ISVs were garnered from the mesoscale Butler–Volmer equations. Pure magnesium with differing amounts of aluminum were used in corrosion tests to exemplify the different pitting, general corrosion, and intergranular corrosion rates, and the macroscale ISV model was calibrated with said data, in which the only inputs to the model are the volume percentages of the elements magnesium and aluminum. Although magnesium alloys were used to motivate and calibrate the model, the model is abstract enough to possibly capture other material systems as well.

Chemistry↗
NASA NTRS1973

Preparation and properties of polytetrafluoroethylene impregnated with rhenium oxides

The results of tests carried out to determine the properties of polytetrafluorethylene (PTFE) impregnated with rhenium oxides are presented. The tests included measurement of physical properties of the impregnated material and investigation of the effects of preparation process variables. Based on the latter tests a mechanism to describe the permeation process is postulated which identifies the rate controlling step to be diffusion of ReF6 molecules into the solid during the initial ReF6 soak. Physical property tests indicated that the electronic conductance is increased by many orders of magnitude while the desirable properties of the PTFE remain virtually unchanged.

Leibecki, H. F.↗
NASA NTRS1976

User's guide to computer program CIVM-JET 4B to calculate the transient structural responses of partial and/or complete structural rings to engine-rotor-fragment impact

A user-oriented computer program CIVM-JET 4B is described to predict the large-deflection elastic-plastic structural responses of fragment impacted single-layer: (a) partial-ring fragment containment or deflector structure or (b) complete-ring fragment containment structure. These two types of structures may be either free or supported in various ways. Supports accommodated include: (1) point supports such as pinned-fixed, ideally-clamped, or supported by a structural branch simulating mounting-bracket structure and (2) elastic foundation support distributed over selected regions of the structure. The initial geometry of each partial or complete ring may be circular or arbitrarily curved; uniform or variable thicknesses of the structure are accommodated. The structural material is assumed to be initially isotropic; strain hardening and strain rate effects are taken into account.

Stagliano, T. R.↗
NASA NTRS1980

Development and demonstration of manufacturing processes for fabricating graphite/LARC-160 polyimide structural elements, part 4, paragraph B

A quality assurance program was developed which included specifications for celion/LARC-160 polyimide materials and quality control of materials and processes. The effects of monomers and/or polymer variables and prepeg variables on the processibility of celion/LARC prepeg were included. Processes for fabricating laminates, honeycomb core panels, and chopped fiber moldings were developed. Specimens and conduct tests were fabricated to qualify the processes for fabrication of demonstration components.

Source record↗
NASA NTRS1982

Study of noise reduction characteristics of composite fiber-reinforced panels, interior panel configurations, and the application of the tuned damper concept

The application of fiber reinforced composite materials, such as graphite epoxy and Kevlar, for secondary or primary structures developing in the commercial airplane industry was investigated. A composite panel program was initiated to study the effects of some of the parameters that affect noise reduction of these panels. The fiber materials and the ply orientation were chosen to be variables in the test program. It was found that increasing the damping characteristics of a structural panel will reduce the vibration amplitudes at resonant frequencies with attendant reductions in sound reduction. Test results for a dynamic absorber, a tuned damper, are presented and evaluated.

Lameris, J.↗
NASA NTRS1981

Reliability-based optimization under random vibration environment

A methodology of formulating the optimum design problem for structural systems with random parameters and subjected to random vibration as a mathematical programming problem is presented. The proposed method is applied to the optimum design of a cantilever beam with a tip mass and a truss structure supporting a water tank. The excitations are assumed to be Gaussian processes and the geometric and material properties are taken to be normally distributed random variables. The probabilistic constraints are specified for individual failure modes since it is easier to specify the reliability level for each failure mode keeping in view the consequences of failure in that particular mode. The time parameter appearing in the random vibration based constraints is eliminated by replacing the probabilities of failure by suitable upper bounds. The numerical results demonstrate the feasibility and effectiveness of applying the reliability-based design concepts to structures with random parameters and operating in random vibration environment.

Rao, S. S.↗
NASA NTRS1987

Shape design sensitivity analysis and optimal design of structural systems

The material derivative concept of continuum mechanics and an adjoint variable method of design sensitivity analysis are used to relate variations in structural shape to measures of structural performance. A domain method of shape design sensitivity analysis is used to best utilize the basic character of the finite element method that gives accurate information not on the boundary but in the domain. Implementation of shape design sensitivty analysis using finite element computer codes is discussed. Recent numerical results are used to demonstrate the accuracy obtainable using the method. Result of design sensitivity analysis is used to carry out design optimization of a built-up structure.

Choi, Kyung K.↗
NASA NTRS1985

Shape design sensitivity analysis using domain information

A numerical method for obtaining accurate shape design sensitivity information for built-up structures is developed and demonstrated through analysis of examples. The basic character of the finite element method, which gives more accurate domain information than boundary information, is utilized for shape design sensitivity improvement. A domain approach for shape design sensitivity analysis of built-up structures is derived using the material derivative idea of structural mechanics and the adjoint variable method of design sensitivity analysis. Velocity elements and B-spline curves are introduced to alleviate difficulties in generating domain velocity fields. The regularity requirements of the design velocity field are studied.

Seong, Hwal-Gyeong↗
NASA NTRS1986

Design sensitivity analysis using EAL. Part 2: Shape design parameters

A numerical implementation of shape design sensitivity analysis of built-up structures is presented, using the versatility and convenience of an existing finite element structural analysis code and its data base management system. This report is a continuation of a previous report on conventional design parameters. The finite element code used in the implementation presented is the Engineering Analysis Language (EAL), which is based on a hybrid analysis method. It has been shown that shape design sensitivity computations can be carried out using the database management system of EAL, without writing a separate program and a separate data base. The material derivative concept of continuum mechanics and an adjoint variable method of design sensitivity analysis are used to derive shape design sensitivity information of structural performances. A domain method of shape design sensitivity analysis and a design component method are used. Displacement and stress functionals are considered as performance criteria.

Dopker, B.↗
NASA NTRS1988

Anisotropic constitutive modeling for nickel-base single crystal superalloys

An anisotropic constitutive model was developed based on crystallographic slip theory for nickel base single crystal superalloys. The constitutive equations developed utilizes drag stress and back stress state variables to model the local inelastic flow. Specially designed experiments were conducted to evaluate the existence of back stress in single crystal superalloy Rene N4 at 982 C. The results suggest that: (1) the back stress is orientation dependent; and (2) the back stress state variable is required for the current model to predict material anelastic recovery behavior. The model was evaluated for its predictive capability on single crystal material behavior including orientation dependent stress-strain response, tension/compression asymmetry, strain rate sensitivity, anelastic recovery behavior, cyclic hardening and softening, stress relaxation, creep and associated crystal lattice rotation. Limitation and future development needs are discussed.

Sheh, Michael Y.↗
NASA NTRS1983

Aerodynamically-driven condensate layer thickness distributions on isothermal cylindrical surfaces

A simple yet rather general mathematical model is presented for predicting the distribution of condensate layer thickness when aerodynamic shear is the dominant mechanism of liquid flow along the surface. The Newtonian condensate film is treated using well-known thin-layer (lubrication theory) approximations, and condensate supply is taken to be the result of either convective diffusion or inertial impaction. Illustrative calculations for a circular cylinder in a crossflow at Re = 100,000 reveal the consequences of alternate condensate arrival mechanisms and the existence of thicker reverse-flow films behind the position of gas boundary-layer separation. The present formulation is readily generalized to include transient liquid layer flows on noncircular objects of variable surface temperature, as encountered in turbine-blade materials testing or operation.

Rosner, D. E.↗