SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Design of variable temperature gas transfer cell for use in solid state spectroscopy
Hydrogen embrittlement is classified into three types: internal reversible hydrogen embrittlement, hydrogen reaction embrittlement, and hydrogen environment embrittlement. Characteristics of and materials embrittled by these types of hydrogen embrittlement are discussed. Hydrogen environment embrittlement is reviewed in detail. Factors involved in standardizing test methods for detecting the occurrence of and evaluating the severity of hydrogen environment embrittlement are considered. The effects of test technique, hydrogen pressure, gas purity, strain rate, stress concentration factor, and test temperature are discussed.
Identification of the hydrogen maser design parameters include the shape of the bulk, q (quality parameter), tuning factors, materials to be used, and operational temperature to offset the wall shift. Expressions for the statistic error on the measured frequency were derived. Localized variations in the concentration of excited atoms were studied and how the shape of the container (the ratio of surface to volume in particular) affects their behavior.
Propellant characteristics for solid rocket motors were not completely determined for its use as a processing variable in today's production facilities. A major effort to determine propellant characteristics obtainable through ultrasonic measurement techniques was performed in this task. The information obtained was then used to determine the uniformity of manufacturing methods and/or the ability to determine non-uniformity in processes.
Mineral identification and mapping of alluvial material using thermal infrared (TIR) remote sensing is extremely useful for tracking sediment transport, assessing the degree of weathering and locating sediment sources. As a result of the linear relation between a mineral's percentage in a given area (image pixel) and the depth of its diagnostic spectral features, TIR spectra can be deconvolved in order to ascertain mineralogic percentages. Typical complications such as vegetation, particle size and thermal shadowing are minimized upon examination of dunes. Actively saltating dunes contain little to no vegetation, are very well sorted and lack the thermal shadows that arise from rocky terrain. The primary focus of this work was to use the Kelso Dunes as a test location for an accuracy analysis of temperature/emissivity separation and linear unmixing algorithms. Accurate determination of ground temperature and component discrimination will become key products of future ASTER data. A decorrelation stretch of the TIMS image showed clear color variations within the active dunes. Samples collected from these color units were analyzed for mineralogy, grain size, and separated into endmembers. This analysis not only revealed that the dunes contained significant mineralogic variation, but were more immature (low quartz percentage) than previously reported. Unmixing of the TIMS data using the primary mineral endmembers produced unique variations within the dunes and may indicate near, rather than far, source locales for the dunes. The Kelso Dunes lie in the eastern Mojave Desert, California, approximately 95 km west of the Colorado River. The primary dune field is contained within a topographic basin bounded by the Providence, Granite Mountains, with the active region marked by three northeast trending linear ridges. Although active, the dunes appear to lie at an opposing regional wind boundary which produces little net movement of the crests. Previous studies have estimated the dunes range from 70% to 90% quartz mainly derived from a source 40 km to the west. The dune field is assumed to have formed in a much more arid climate than present, with the age of the deposit estimated at greater than 100,000 years.
The need for accurate material models to simulate the deformation, damage and failure of polymer matrix composites is becoming critical as these materials are gaining increased usage in the aerospace and automotive industries. While there are several composite material models currently available within LSDYNA (Livermore Software Technology Corporation), there are several features that have been identified that could improve the predictive capability of a composite model. To address these needs, a combined plasticity and damage model suitable for use with both solid and shell elements is being developed and is being implemented into LS-DYNA as MAT_213. A key feature of the improved material model is the use of tabulated stress-strain data in a variety of coordinate directions to fully define the stress-strain response of the material. To date, the model development efforts have focused on creating the plasticity portion of the model. The Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic yield function with a nonassociative flow rule. The coefficients of the yield function, and the stresses to be used in both the yield function and the flow rule, are computed based on the input stress-strain curves using the effective plastic strain as the tracking variable. The coefficients in the flow rule are computed based on the obtained stress-strain data. The developed material model is suitable for implementation within LS-DYNA for use in analyzing the nonlinear response of polymer composites.
The objective of this task was to quantify thermal losses involving integrating MLI into real life situations. Testing specifically focused on the effects of penetrations (including structural attachments, electrical conduit/feedthroughs, and fluid lines) through MLI. While there have been attempts at quantifying these losses both analytically and experimentally, none have included a thorough investigation of the methods and materials that could be used in such applications. To attempt to quantify the excess heat load coming into the system due to the integration losses, a calorimeter was designed to study two dimensional heat transfer through penetrated MLI. The test matrix was designed to take as many variables into account as was possible with the limited test duration and system size. The parameters varied were the attachment mechanism, the buffer material (for buffer attachment mechanisms only), the thickness of the buffer, and the penetration material. The work done under this task is an attempt to measure the parasitic heat loads and affected insulation areas produced by system integration, to model the parasitic loads, and from the model produce engineering equations to allow for the determination of parasitic heat loads in future applications. The methods of integration investigated were no integration, using a buffer to thermally isolate the strut from the MLI, and temperature matching the MLI on the strut. Several materials were investigated as a buffer material including aerogel blankets, aerogel bead packages, cryolite, and even an evacuated vacuum space (in essence a no buffer condition).
We present analyses of two Ginga observations and two observations from the ROSAT database of NGC 7469, focusing on the spectral variability observed on timescales of days and longer. During the 1988 Ginga observation, the hardness ratio (8-21 keV/3.4-5.7 keV) increased significantly as the total flux decreased by 30%. As the spectrum is well fit by the reflection model and since the spectra variability dominates the higher energy band, this could be explained by either a variation in the power law index or in the effective covering fraction of the reflecting material. This ambiguity is inherent in reflection modeling of Ginga spectra from moderate flux Seyfert 1 galaxies. Assuming that the power law index did not change, we find that the reflected flux is consistent with being constant, suggesting that much of the reflecting material may be located more than 3 light-days from the continuum source with the molecular torus being a plausible site. This scenario is also supported by the report of a narrow rather than broad iron K-alpha line in the ASCA data by Guainazzi et al. NGC 7469 was faint during the 1989 Ginga observation, but variability was observed with doubling timescale of 5 hr, and the spectrum was harder. A reflection component could not be constrained, and the change in the spectrum could be explained by an increase in neutral absorption. The brighter of two ROSAT spectra was significantly softer, and in both spectra there was evidence of spectral complexity, as has been previously reported by Turner, George, & Mushotzky and Brandt et al. The spectrum could be fit by a variety of two-component models, including a warm absorber model, an ionized disk model, and a thermal model with single-component blackbody spectrum, but joint fitting of the 1988 average Ginga spectrum and the nonsimultaneous ROSAT spectra favored thermal models, and other models required an anomalously high reflection ratio. This model is supported by the observation of a soft excess component and the lack of ionized absorption edges in the ASCA spectrum by Guainazzi et al. The long-term spectral variability could be explained by relative variability between the power-law and soft excess component normalizations, perhaps implying that hard X-ray reprocessing in thermal material does not dominate on long timescales.
Arctic Ocean physical and biogeochemical properties are strongly influenced by freshwater input from land and through the Bering Strait, where the mean currents transport water northward from the Bering Sea. The Yukon River is one of the largest rivers in North America and the Arctic, contributing large quantities of freshwater and terrigenous material to the coastal ocean in the northern Bering Sea. However, a detailed analysis of the coastal hydrodynamics at the outflow of the river has not been conducted in this remote but regionally important river. A three-dimensional hydrodynamic model was built to represent the lower Yukon River and coastal ocean for the ice-free months in 7 years. On average, a large anticyclonic eddy persisted at the main outflow of the Yukon that recirculates water back toward the coast where the currents converge to form a mean northward transport along the delta. Interannual spatial variance in salinity was relatively small, while there was substantial variance in u and v current velocity. u velocity spatial variance was correlated to the volume of freshwater discharge across years, while v velocity spatial variance was correlated to the N–S wind velocity. During strong wind events, plume structure was substantially altered: southerly winds deepened the plume and enhanced northward transport, while northerly winds shoaled and strengthened the pycnocline, and reversed the flow toward the south. The variability in plume dispersion on short time scales due to wind forcing has implications for where terrigenous material is processed in and settles out of the water column.
Composite materials offer significant weight-saving potential for aerospace applications in propellant and oxidizer tanks. This application for oxygen tanks presents the challenge of being oxygen compatible in addition to complying with the other required material characteristics. This effort reports on the testing procedures and data obtained in examining and selecting potential composite materials for oxygen tank usage. Impact testing of composites has shown that most of these materials initiate a combustion event when impacted at 72 ft-lbf in the presence of liquid oxygen, though testing has also shown substantial variability in reaction sensitivities to impact. Data for screening of 14 potential composites using the Bruceton method is given herein and shows that the 50-percent reaction frequencies range from 17 to 67 ft-lbf. The pressure and temperature rises for several composite materials were recorded to compare the energy releases as functions of the combustion reactions with their respective reaction probabilities. The test data presented are primarily for a test pressure of 300 psia in liquid oxygen. The impact screening process is compared with oxygen index and autogenous ignition test data for both the composite and the basic resin. The usefulness of these supplemental tests in helping select the most oxygen compatible materials is explored. The propensity for mechanical impact ignition of the composite compared with the resin alone is also examined. Since an ignition-free composite material at the peak impact energy of 72 ft-lbf has not been identified, composite reactivity must be characterized over the impact energy level and operating pressure ranges to provide data for hazard analyses in selecting the best potential material for liquid tank usage.
We present RXTE monitoring observations of the Seyfert 2 galaxy Mrk 348 spanning a 6 month period. The time-averaged spectrum in the 3-20 keV band shows many features characteristic of a Compton-thin Seyfert 2 galaxy, namely a hard underlying power-law continuum (Gamma approximately equal 1.8) with heavy soft X-ray absorption (N(sub H) approximately 10(exp 23)/sq cm) plus measurable iron K.alpha emission (equivalent width approximately 100 eV) and, at high energy, evidence for a reflection component (R approximately < 1). During the first half of the monitoring period the X-ray continuum flux from Mrk 348 remained relatively steady. However this was followed by a significant brightening of the source (by roughly a factor of 4) with the fastest change corresponding to a doubling of its X-ray flux on a timescale of about 20 days. The flux increase was accompanied by a marked softening of X-ray spectrum most likely attributable to a factor approximately 3 decline in the intrinsic line-of-sight column density. In contrast the iron K.alpha line and the reflection components showed no evidence of variability. These observations suggest a scenario in which the central X-ray source is surrounded by a patchy distribution of absorbing material located within about a light-week of the nucleus of Mrk 348. The random movement of individual clouds within the absorbing screen, across our line of sight, produces substantial temporal variations in the measured column density on timescales of weeks to months and gives rise to the observed X-ray spectral variability. However, as viewed from the nucleus the global coverage and typical thickness of the cloud layer remains relatively constant.
Drill fines created by the Curiosity rover at Gale Crater, Mars have exhibited variable visible/near-infrared spectral features attributable to the presence of ferrous and ferric minerals. Drilled locations within the Murray formation and on the Vera Rubin Ridge (VRR) were shown by the CheMin instrument to contain significant amounts of hematite. However, typical hematite spectral features (e.g., absorptions near 530 nm and 860 nm) have varied inconsistently with hematite abundances. This suggests that other factors such as hematite grain size or crystallinity, the presence of amorphous materials, and/or photometric effects play a role in the observed spectra. Using laboratory spectra of hematite acquired at difference grain sizes, we document the variability in key spectral features. We also compare spectral parameters computed from Mastcam spectra on Mars of three hematite-bearing ChemCam calibration target (CCCT) samples with known hematite and amorphous material abundances.
Here we present a new optical constant facility developed at NASA Ames that will allow the determination of optical constants in the infrared of various materials, analogs of hazes and cloud particles in (exo)planet atmospheres and brown dwarfs. Our facility is composed of a Fourier Transform Infrared (FTIR) spectrometer continuously covering the Near-IR, mid-IR and Far-IR range (from 0.74 to 200 µm), coupled to variable angle transmittance and reflectance accessories that allow the characterization of the scattering properties of nonhomogeneous samples (laboratory planetary aerosol analogs, films, slabs of material, crystals, powders...) over a wide incidence and emittance angle range (0-90 degrees). This permits the angular light distribution in both transmission and reflection measurements to be characterized, enabling the determination of the complex indices of refraction, n and k, over the full NIR-FIR range via modeling of the laboratory observations. The resulting refractive indices are critical input parameters in radiative transfer models, exoplanet and brown dwarf cloud models, protoplanetary disk simulations and other models used for the interpretation of observational data from past, current and future (exo)planetary NASA missions. We will present preliminary data obtained on Titan aerosol analogs produced in the Titan Haze Simulation (THS) experiment on COSmIC, a unique experimental platform developed at NASA Ames that allows the simulation of Titan's complex atmospheric chemistry at Titan-like temperature (200 K). We will also introduce a new study of the optical properties of ammonium-bearing phosphates, potential cloud particles forming in temperate exoplanets and brown dwarfs.
A new optical constant facility has been developed at NASA Ames that will allow the determination of optical constants in the infrared of various materials, analogs of (exo)planetary hazes and cloud particles. Our facility is composed of a Fourier Transform Infrared (FTIR) spectrometer continuously covering the Near-IR to Far-IR range (from 0.74 to 200 μm), coupled to variable angle transmittance and reflectance accessories that allow the characterization of the scattering properties of non-homogeneous samples (laboratory (exo)planetary aerosol analogs, films, slabs of material, crystals, powders, etc.) over a wide incidence and emittance angle range (0-90 degrees). This new experimental setup allows the characterization of angular light distribution in both transmission and reflection measurements, and enables the determination of the complex indices of refraction, n and k, over the full NIR-FIR range via modeling of the laboratory measurements. The resulting refractive indices are critical input parameters in radiative transfer models, microphysical models, cloud models, protoplanetary disk simulations and other models used for the interpretation of observational data from past, current and future (exo)planetary NASA missions. Here we present a description of the facility along with the first determination of optical constants for Titan aerosol analogs produced in the Titan Haze Simulation (THS) experiment on COSmIC, a unique experimental setup developed at NASA Ames that allows the simulation of Titan’s complex atmospheric chemistry at Titan-like temperature (200 K). We also introduce a new study of the optical properties of ammonium-bearing phosphates, potential cloud particles forming in temperate exoplanets and brown dwarfs.
The objective of this study was to clarify the role that interstellar-cloud chemistry played in forming the population of organic molecules presently found in carbonaceous meteorites. This goal was to be achieved by means of defining the isotopic components present in organic and related phases in the meteorites and thereby identify the processes and source reservoirs involved in organic synthesis in the early solar system. Isotopic analysis of separated amino acids from the Murchison meteorite yielded results that are complex and not fully interpretable at this time. Substantial inter-acid variability in D/H ratio was observed, some but not all of which could be attributed to exchange with terrestrial hydrogen. Pronounced, though smaller, variability was also found for N-15/N-14 ratios. For both D/H and N-15/N-14 data, observed meteoritic values were substantially greater than found in terrestrial materials, providing a robust constraint on degrees of possible terrestrial contamination. Also, C-13/C-12 ratios, though falling within the range of data found on earth, significantly exceeded those characteristic of naturally occurring terrestrial amino acids. Inter-acid variability in C-13/C-12 ratios was muted relative to that observed for D/H and N-15/N-14 but still lay well outside of experimental uncertainty. No systematic relationship could be observed between variations in H, C and N isotopes. Two anomalous components were also found during the course of this study. A highly (greater than 6% relative to terrestrial) N-15-depleted, N-rich compound, which has not yet been identified, co-eluted with some amino acids. Clearly the Murchison meteorite sampled nitrogen from a number of highly diverse isotopic reservoirs. In fact, from this and related studies, it is now apparent that the distribution of nitrogen isotopes in the primitive solar system was extremely inhomogeneous. The second anomalous result obtained in the present study was for an extract of 'ammonia' from Murchison. It should be noted that this sample consisted of ammonia that was probably derived from a number of different compounds present in the meteorite itself, possibly including amines and amides, as well as ammonia sensu strictu and ammonium slats. However, the significance of this analysis is that the N-15/N-14 ratio measured was much lower than those found for the meteoritic amino acids (+2% vs around + 9% relative to terrestrial). This raises an important question concerning the source of the ammonia that was involved in synthesis of the amino acids. This issue needs to be explored further.
Computer processing of Landsat MSS data was performed using contrast stretching and band-to-band ratioing. A false color ratio composite picture showed color anomalies which coincided with known areas of alteration on and about Red Mountain. A helicopter survey of the study area was undertaken using a portable field reflectance spectrometer. One hundred fifty-six spectra were obtained in the 0.4 to 2.5 micrometer wavelength region. The spectra were digitized, and contour maps for 24 wavelength intervals were produced; no spectral anomalies were evident for the known altered areas. A contour map produced from the 1.6 and 2.2 micrometer ratio generally delineated the alteration areas. The 1.3, 1.6, and 2.2 micrometer wavelength data were canonically transformed using a transformation empirically derived from discriminant function analysis of altered and unaltered materials for the Goldfield, Nevada region, and a contour map was produced for the first canonical variable. The known areas of alteration were clearly defined on the contour map.
Predictions of wear on contemporary copper-based brake material sliding against 17-22 AS grade steel, wear testing equipment, formulation of wear, and test results are discussed. An initial investigation of worn surfaces of the brake material and a mating steel rotor was carried out. A wear model proposed suggests initiation of cracks at a hard particle inclusion site in the surface layer of the brake material; crack propagation allows particles to be removed by intersection of cracks. Mutual relations between sliding variables, load, time, hardness, and surface temperature are studied. Empirical formulas are exhibited.
A code has been written to describe the behavior of an ablating heat shield throughout the entire maneuver into a planetary atmosphere. The code includes a trajectory computation for a variable mass, a computation of the heating history and distribution over the probe, ablation effects, indepth material response, and shape change. The code draws the initial and final shapes of the heat shield and computes its initial and final mass. Results are compared with those of other investigators, and solutions are obtained for a silica heat shield entering three model atmospheres of Jupiter. The effects of varying half cone angle and entry angle are examined as well as shape change effects. The so-called 'cusping effect' in the stagnation region is examined.