Plasmonic backscattering enhanced inverted photovoltaics
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Thin-film lithium niobate on insulator (LNOI) has recently emerged as an exciting platform for nonlinear integrated photonic devices, drawing parallels with the impact of silicon on insulator (SOI) in the electronic device realm. While the influence of interfacial states of SOI on electronic device performance, particularly their contribution to parasitic radio frequency (RF) losses, is well-documented, this aspect remains relatively unexplored in LNOI, despite their shared silicon/oxide interface structure. Here, we investigate the RF loss arising from mobile charges at the silicon/oxide interface of the LNOI platform. We show that this parasitic conduction can be exacerbated, especially during plasma etching, and leads to substantial RF losses. Through strategic incorporation of a trap-rich poly-silicon layer at this interface, we effectively eliminate this parasitic conduction, resulting in the suppression of RF losses. This work establishes crucial guidelines for harnessing LNOI in applications such as high-frequency electro-mechanical devices, high-speed electro-optic modulators, and high-efficiency microwave-to-optics converters.
Significance Molecular imaging with PET can provide a dynamic, whole-body picture of the rate of biological processes or distribution of biological targets by tracking the distribution of radiolabeled molecules or particles in the body over time. Continual efforts to develop new PET probes are expanding the variety of processes and targets that can be visualized, facilitating basic research, drug development, and patient care. However, access to these probes at all stages of their development is hindered by high costs arising, in large part, from the significant resources that are typically dedicated to production of a single probe. Emerging technologies with increased synthesis flexibility are allowing increased probe diversity with fewer resources and could significantly increase access to new molecular imaging agents.
Higher dimensional (i.e., 2-D and 3-D) modeling is indispensable to correctly evaluate the responses of electromagnetic logging tools in complex formation environments. However, limited by the high computational cost of rigorous modeling such as finite difference method and the finite element method, the real-time applications in the well logging industry primarily rely on the 1-D forward solver, which would result in erroneous formation evaluation for complex scenarios. As a result, aiming at realizing fast modeling for electromagnetic logging tools in complex formations, this paper proposes a general framework assisted by deep neural networks (DNNs). The framework consists of three modules: earth model classification, parameter extraction, and surrogate construction. Separate DNNs are trained and tested for different modules. The accuracy and efficiency of the DNN assisted fast modeling are validated by several experiments. Here, this study finds that the fast modeling assisted by DNNs is able to calculate the tool responses and reconstruct the subsurface formations in real-time.
Transfer printing of microscale devices has been shown to be a manufacturable pathway to low-profile, low cost, high concentration photovoltaic modules, where extremely high efficiency solar cells are desirable to achieve competitive costs. Inverted metamorphic multijunction (IMM) solar cells represent a promising platform for ultrahigh efficiency concentrator photovoltaic systems with a clear pathway to 50% efficiency. While transfer printing of microscale solar cell devices has been demonstrated with traditional upright solar cell structures, IMM structures present additional processing challenges. We demonstrate, for the first time, the transfer printing of fully-functional microscale triple-junction (3J) IMM solar cells.
Purpose: To facilitate fast and accurate iterative volumetric image reconstruction from limited-angle on-board projections. Methods: Intrafraction motion hinders the clinical applicability of modern radiotherapy techniques, such as lung stereotactic body radiation therapy (SBRT). The LIVE system may impact clinical practice by recovering volumetric information via Digital Tomosynthesis (DTS), thus entailing low time and radiation dose for image acquisition during treatment. The DTS is estimated as a deformation of prior CT via iterative registration with on-board images; this shifts the challenge to the computational domain, owing largely to repeated projection computations across iterations. We address this issue by composing efficient digital projection operators from their constituent parts. This allows us to separate the static (projection geometry) and dynamic (volume/image data) parts of projection operations by means of pre-computations, enabling fast on-board processing, while also relaxing constraints on underlying numerical models (e.g. regridding interpolation kernels). Further decoupling the projectors into simpler ones ensures the incurred memory overhead remains low, within the capacity of a single GPU. These operators depend only on the treatment plan and may be reused across iterations and patients. The dynamic processing load is kept to a minimum and maps well to the GPU computational model. Results: We have integrated efficient, pre-computable modules for volumetric ray-casting and FDK-based back-projection with the LIVE processing pipeline. Our results show a 60x acceleration of the DTS computations, compared to the previous version, using a single GPU; presently, reconstruction is attained within a couple of minutes. The present implementation allows for significant flexibility in terms of the numerical and operational projection model; we are investigating the benefit of further optimizations and accurate digital projection sub-kernels. Conclusion: Composable projection operators constitute a versatile research tool which can greatly accelerate iterative registration algorithms and may be conducive to the clinical applicability of LIVE. National Institutes of Health Grant No. R01-CA184173; GPU donation by NVIDIA Corporation.
The simulator is an isothermal, three-dimensional, four-phase, compositional, equation-of–state (EOS) simulator. We have named the simulator UTDOE-CO2 capable of simulating various recovery processes (i.e., primary, secondary waterflooding, and miscible and immiscible gas flooding). We include both the Peng-Robinson EOS and the Redlich-Kwong EOS models. A Gibbs stability test is also included in the model to perform a phase identification test to consistently label each phase for subsequent property calculations such as relative permeability, viscosity, density, interfacial tension, and capillary pressure. Our time step strategy is based on an IMPEC-type method (implicit pressure and explicit concentration). The gridblock pressure is solved first using the explicit dating of saturation-dependent terms. Subsequently, the material balance equations are solved explicitly for the total concentration of each component. The physical dispersion term is also included in the governing equations. The simulator includes (1) several foam model(s) for gas mobility control, (2) compositional relative permeability models with the hysteresis option, (3) corner point grid and several efficient solvers, (4) geomechanics module to compute stress field as the result of CO 2 injection/production, (5) the format of commercial visualization software, S3graf from Science-soft Ltd., was implemented for user friendly visualization of the simulation results. All tasks are completed and the simulator was fully tested and delivered to the DOE office including a user’s guide and several input files and the executable for Windows Pcs. We have published several SPE papers, presented several posters, and one MS thesis is completed (V. Pudugramam, 2013) resulting from this DOE funded project.
As the nuclear industry moves to advanced ceramic based materials for cladding and core structural materials for a variety of advanced reactors, new standards and test methods are required for material development and licensing purposes. For example, General Atomics (GA) is actively developing silicon carbide (SiC) based composite cladding (SiC-SiC) for its Energy Multiplier Module (EM2), a high efficiency gas cooled fast reactor. Through DOE funding via the advanced reactor concept program, GA developed a new test method for the nominal joint strength of an endplug sealed to advanced ceramic tubes, Fig. 1-1, at ambient and elevated temperatures called the endplug pushout (EPPO) test. This test utilizes widely available universal mechanical testers coupled with clam shell heaters, and specimen size is relatively small, making it a viable post irradiation test method. The culmination of this effort was a draft of an ASTM test standard that will be submitted for approval to the ASTM C28 ceramic committee. Once the standard has been vetted by the ceramics test community, an industry wide standard methodology to test joined tubular ceramic components will be available for the entire nuclear materials community.
Measurements with the Spent Fuel Rod Counter (SFRC) to be performed bi annually include 3 He detector efficiency checks (in both modules) and ion chamber channel tests with a pocket pulser. These measurements will all be performed at TA-35, building 27 where the SFRC is stored. Refer to LA-UR-22-31737 and LA-CP-22-20079 SFRC measurement control documents for a description of additional tests. Note that during this measurement period, counts could not be confirmed for the Si detectors, as an analog pulse to TTL box necessary for the DAQs to communicate with the detectors was still under construction. For this reason, typical measurements at the Calibrated Dose Facility were not performed for the second half of FY23. When these components are finished by the NEN electrical shop, the Si detectors will be implemented into these measurement control checks.
This CRADA project, based on the DOE Solar Energy Technologies Office (SETO) Solar Prize Voucher program, helped Leap Photovoltaics to develop methodologies to immobilize Si particles by permanently attaching them to an Al-coated substrate and thereby forming carrier-selective electrical contacts to the Si particles. The bigger goal was to help Leap Photovoltaics develop these immobilized and contacted particle arrays into relatively efficient, inexpensive, and industrially relevant solar cells. By using Si particles instead of wafers in a solar cell absorber layer, one can avoid costs associated with growing monocrystalline Si ingots, then diamond-sawing them into wafers, then processing wafers into cells – a mainstream practice in today's high-efficiency Si cell and module technology. Monocrystalline or polycrystalline Si particles can be obtained in various ways: for example, Si kerf from wafer sawing is monocrystalline; recycled Si cell wafers can be ball-milled into particles; particles can be grown using various gas-phase techniques (mostly from SiH4). These Si particles can be assembled onto a substrate and serve as an absorber layer for the solar cell, absorbing photons to generate photocarriers. The challenge with this technique is to collect photocarriers from individual Si particles, with separation of photogenerated electrons to the negative cell’s electrode and positive photogenerated holes to the positive electrode. Therefore, each particle must have two isolated, carrier-selective contacts: one for electrons and one for holes. Plus, particles need to be immobilized onto a solid substrate. The goal of this work was focused on the immobilization of Si particles and creating hole-selective contact to them at the same time, using industrially relevant Si photovoltaic (PV) cell technology: screen printing of Al back-surface field electrodes. This is used in the mainstream Propane Education and Research Council (PERC) technology for hole-collecting contacts at the back of the cell. The work performed at NREL consisted of screen printing of Al metal paste on substrates, spreading Si particles onto it, and thermally processing the structures to form hole-collecting contacts. The final structures were investigated by scanning electron microscopy (SEM) after focused ion beam (FIB) cross-sectioning and polishing. The work was done jointly by NREL staff and Leap Photovoltaics (Leap PV) employees stationed at NREL. The samples were then taken to Leap PV for further processing. Training the Leap PV employee on various NREL techniques (laser cutting, screen printing, thermal processing, characterization) was part of the scope.
The Committee commends and thanks the presenters and GA for providing clear and informative presentations. We present our responses to 5 questions raised in the Charge, as well as additional comments that may be useful for the project. (Question 1) The IMFIT framework is based on PYTHON and CCA; can IMFIT meet its long-term goals with this choice of language for framework? Our first recommendation is to change the terminology; it appears that the project is not really utilizing CCA (Common Component Architecture). The project is really about using Python to organize workflow among components that are spawned as processes via pipes from Python. We suggest that in describing the project, the team drop the designation 'CCA' and simply state that the IMFIT framework is based on using Python to control workflow among components. Concerning the specific question: we understand the principal goal of the project to be the development of an easy-to-use tool that efficiently integrates different physics modules to support experimental data analysis and modeling. Yes, Python and the workflow-based framework are appropriate choices for meeting this objective. The Committee, in examining the goal, discussed whether the IMFIT project was duplicative of other projects; there are several others in the U.S. and elsewhere with integrated modeling goals. In particular in the U.S., SWIM, PTRANSP, and the proto-FSP's. However this project occupies a reasonably unique niche through its emphases on integrating experimental data, use of existing components, its near-term focus, and the extent to which is targeted at experimentalist users. (Question 2) Will IMFIT benefit from the additional use of an interoperability language for framework such as BABEL? No, IMFIT is not really doing inter-language communication. In particular this will be the case as long as inter-component communication is via files--and that's OK so long as you aren't doing lots of short steps with communication at each step. (Question 3) IMFIT GUI is based on the public PyGTK toolkit; will IMFIT benefit from the additional use of other public Python graphic toolkits such as wxPython that is a cross-platform wrapper, or PyQt, or a commercial package such as IDL? PyGTK seems adequate for now. The team needs to decide if it needs more capability. Avoid licensed software that interferes with portability and the open-source goal (and thus in particular avoid IDL). (Question 4) Will IMFIT benefit from using a XML-RPC as alternative to sending files thru sockets? IMFIT could benefit by adopting some kind of self-describing format, such as XML or HDF5, but data can still be sent over sockets. This is part of a broader question: 'Should IMFIT adopt some kind of standard for communicating data between components?' To do anything other than what is done now requires modification of individual components (or convertors/wrappers). But moving to a self-describing standard is a good idea, which should be considered. You don't need to impose a standard, but you could decide on one and move toward it gradually, as the architecture doesn't impose a standard. But whether you adopt a standard and the pace of moving toward it is up to you. (Question 5) Will IMFIT benefit from any other available computational tool? (a) IMFIT would benefit from fuller use of an already incorporated tool--python language in the task execution specification, to enable desired features like branching; (b) If there is a high degree of data hierarchy, IMFIT should explore HDF5 as well as NETCDF and compare; (c) IMFIT would benefit from moving toward common data standards; (d) It would be useful for the IMFIT team to monitor developments in related projects such as the proto-FSP's and PTRANSP to ascertain if there are potentially useful tools.
General Electric’s (GE) DOE Solar Energy Technologies TPP program encompassesd development in critical areas of the photovoltaic value chain that affected the LCOE for systems in the U.S. This was a complete view across the value chain, from materials to rooftops, to identify opportunities for cost reductions in order to realize the Department of Energy’s cost targets for 2010 and 2015. GE identified a number of strategic partners with proven leadership in their respective technology areas to accelerate along the path to commercialization. GE targeted both residential and commercial rooftop scale systems. To achieve these goals, General Electric and its partners investigated three photovoltaic pathways that included bifacial high-efficiency silicon cells and modules, low-cost multicrystalline silicon cells and modules and flexible thin film modules. In addition to these technologies, the balance of system for residential and commercial installations were also investigated. Innovative system installation strategies were pursed as an additional avenue for cost reduction.
Explore the source record for details and available documents.
A design technology study was performed to identify a high speed, multistage, variable geometry fan configuration capable of achieving wide flow modulation with near optimum efficiency at the important operating condition. A parametric screening study of the front and rear block fans was conducted in which the influence of major fan design features on weight and efficiency was determined. Key design parameters were varied systematically to determine the fan configuration most suited for a double bypass, variable cycle engine. Two and three stage fans were considered for the front block. A single stage, core driven fan was studied for the rear block. Variable geometry concepts were evaluated to provide near optimum off design performance. A detailed aerodynamic design and a preliminary mechanical design were carried out for the selected fan configuration. Performance predictions were made for the front and rear block fans.
An advanced process sequence for manufacturing high efficiency solar cells and modules in a cost-effective manner is discussed. Emphasis is on process simplicity and minimizing consumed materials. The process sequence incorporates texture etching, plasma processes for damage removal and patterning, ion implantation, low pressure silicon nitride deposition, and plated metal. A reliable module design is presented. Specific process step developments are given. A detailed cost analysis was performed to indicate future areas of fruitful cost reduction effort. Recommendations for advanced investigations are included.
Ultra-low mass deployable and erectable truss structure designs for spacecraft are identified using computerized structural sizing techniques. Extremely slender strut proportions are shown to characterize minimum mass spacecraft which are designed for shuttle transport to orbit. Discrete element effects using a recently developed buckling theory for periodic lattice type structures are presented. An analysis of fabrication imperfection effects on the surface accuracy of four different antenna reflector structures is summarized. The tetrahedral truss has the greatest potential of the structures examined for application to accurate or large reflectors. A deployable module which can be efficiently transported is identified and shown to have significant potential for application to future antenna requirements. Investigations of erectable structure assembly are reviewed.
Ultra-low mass deployable and erectable truss structure designs for spacecraft are identified using computerized structural sizing techniques. Extremely slender strut proportions are shown to characterize minimum mass spacecraft which are designed for Shuttle transport to orbit. Analytical results are presented which demonstrate discrete element effects using a recently developed buckling theory for periodic lattice type structures. An analysis of fabrication imperfection effects on the surface accuracy of four different antenna reflector structures is summarized. This study shows the tetrahedral truss to have the greatest potential of the structures examined for application to accurate or large reflectors. A deployable module which can be efficiently transported is identified and shown to have significant potential for application to future antenna requirements. Recent investigations of erectable structure assembly are reviewed. Initial experiments simulating astronaut assembly by extra-vehicular activity (EVA) show that a pair of astronauts can achieve assembly times of 2-5 min/strut. Studies indicate that an automated assembler can achieve times of less than 1 min/strut on an around-the-clock basis.