Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Band alignment of HfO{sub 2}/multilayer MoS{sub 2} interface determined by x-ray photoelectron spectroscopy: Effect of CHF{sub 3} treatment

The energy band alignment between HfO{sub 2}/multilayer (ML)-MoS{sub 2} was characterized using high-resolution x-ray photoelectron spectroscopy. The HfO{sub 2} was deposited using an atomic layer deposition tool, and ML-MoS{sub 2} was grown by chemical vapor deposition. A valence band offset (VBO) of 1.98 eV and a conduction band offset (CBO) of 2.72 eV were obtained for the HfO{sub 2}/ML-MoS{sub 2} interface without any treatment. With CHF{sub 3} plasma treatment, a VBO and a CBO across the HfO{sub 2}/ML-MoS{sub 2} interface were found to be 2.47 eV and 2.23 eV, respectively. The band alignment difference is believed to be dominated by the down-shift in the core level of Hf 4d and up-shift in the core level of Mo 3d, or the interface dipoles, which caused by the interfacial layer in rich of F.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth of wurtzite InN on bulk In{sub 2}O{sub 3}(111) wafers

A single phase InN epitaxial film is grown on a bulk In{sub 2}O{sub 3}(111) wafer by plasma-assisted molecular beam epitaxy. The InN/In{sub 2}O{sub 3} orientation relationship is found to be (0001) parallel (111) and [1100] parallel [112]. High quality of the layer is confirmed by the small widths of the x-ray rocking curves, the sharp interfaces revealed by transmission electron microscopy, the narrow spectral width of the Raman E{sub 2}{sup h} vibrational mode, and the position of the photoluminescence band close to the fundamental band gap of InN.

36 MATERIALS SCIENCE↗

The role of the droplet interface in controlling the multiphase oxidation of thiosulfate by ozone

Predicting reaction kinetics in aqueous microdroplets, including aerosols and cloud droplets, is challenging due to the probability that the underlying reaction mechanism can occur both at the surface and in the interior of the droplet. Additionally, few studies directly measure the surface activities of doubly charged anions, despite their prevalence in the atmosphere. Here, deep-UV second harmonic generation spectroscopy is used to probe surface affinities of the doubly charged anions thiosulfate, sulfate, and sulfite, key species in the thiosulfate ozonation reaction mechanism. Thiosulfate has an appreciable surface affinity with a measured Gibbs free energy of adsorption of -7.3 ± 2.5 kJ mol -1 in neutral solution, while sulfate and sulfite exhibit negligible surface propensity. The Gibbs free energy is combined with data from liquid flat jet ambient pressure X-ray photoelectron spectroscopy to constrain the concentration of thiosulfate at the surface in our model. Stochastic kinetic simulations leveraging these novel measurements show that the primary reaction between thiosulfate and ozone occurs at the interface and in the bulk, with the contribution of the interface decreasing from ~65% at pH 5 to ~45% at pH 13. Additionally, sulfate, the major product of thiosulfate ozonation and an important species in atmospheric processes, can be produced by two different pathways at pH 5, one with a contribution from the interface of >70% and the other occurring predominantly in the bulk (>98%). The observations in this work have implications for mining wastewater remediation, atmospheric chemistry, and understanding other complex reaction mechanisms in multiphase environments. Future interfacial or microdroplet/aerosol chemistry studies should carefully consider the role of both surface and bulk chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface stability of SrNbO 3+δ grown by hybrid molecular beam epitaxy

4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO 3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d 1 Nb 4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO 3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO 3 substrates. Varying thicknesses of insulating SrHfO 3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO 3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO 3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d 1 metastable charge state under atmospheric conditions.

36 MATERIALS SCIENCE↗

Structural and Functional Insights into the Molecular Mechanisms Responsible for the Regulation of Pyruvate Dehydrogenase Kinase 2

PDHK2 is a mitochondrial protein kinase that phosphorylates pyruvate dehydrogenase complex, thereby down-regulating the oxidation of pyruvate. Here, we present the crystal structure of PDHK2 bound to the inner lipoyl-bearing domain of dihydrolipoamide transacetylase (L2) determined with or without bound adenylyl imidodiphosphate. Both structures reveal a PDHK2 dimer complexed with two L2 domains. Comparison with apo-PDHK2 shows that L2 binding causes rearrangements in PDHK2 structure that affect the L2- and E1-binding sites. Significant differences are found between PDHK2 and PDHK3 with respect to the structure of their lipoyllysine-binding cavities, providing the first structural support to a number of studies showing that these isozymes are markedly different with respect to their affinity for the L2 domain. Both structures display a novel type II potassium-binding site located on the PDHK2 interface with the L2 domain. Binding of potassium ion at this site rigidifies the interface and appears to be critical in determining the strength of L2 binding. Evidence is also presented that potassium ions are indispensable for the cross-talk between the nucleotide- and L2-binding sites of PDHK2. The latter is believed to be essential for the movement of PDHK2 along the surface of the transacetylase scaffold.

60 APPLIED LIFE SCIENCES↗

Controlled Synthesis, Manipulation of Surface Hydrophobicity and Self-Assembly of Hematite Nanocrystals

The preparation of uniform iron oxide monolayer thin films is of great interest not only in advanced materials synthesis but also in studies of microbial cell and iron oxide mineral interface interactions by techniques such as neutron reflectometry, which requires the use of uniform thin films of the mineral on a substrate. Here we report three techniques for fabricating such uniform hematite ( -Fe2O3) nanocrystal thin films. The nanocrystals with controlled sizes and morphologies were first synthesized by thermal hydrolysis of Fe3+ ions in acidic aqueous solution. Three methods were tested to enhance the surface hydrophobicity of the synthesized nanoparticles, including thermal dissociation of surface hydroxyl groups, stepwise solvent exchange, and surfactant-assisted phase transfer. FTIR and Raman spectroscopic analyses were used to elucidate the mechanisms of surface hydrophobicity changes on hematite nanoparticles. Results indicate that techniques of thermal treatment and stepwise solvent exchange caused the dissociation of surface -Fe OH groups into Fe-O-Fe structures, whereas surfactant-assisted phase transfer gave rise to surface hydrophobicity due to sorbed hydrocarbon chains. These surface modified hematite nanoparticles were found to readily self-assemble into monolayers at the water-air interface, which provided an effective means to obtain hematite nanoparticle thin films with controlled packing density and layer thicknesses in a Langmuir-Blodgett trough. Langmuir isotherm, SEM, TEM, AFM, UV-visible spectroscopy, and neutron reflectometry were used to characterize these thin films for their stability and uniformity before they were used for studies of the interactions between hematite and macromolecules.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermally-driven H interaction with HfO{sub 2} films deposited on Ge(100) and Si(100)

In the present work, we investigated the thermally-driven H incorporation in HfO{sub 2} films deposited on Si and Ge substrates. Two regimes for deuterium (D) uptake were identified, attributed to D bonded near the HfO{sub 2}/substrate interface region (at 300 °C) and through the whole HfO{sub 2} layer (400–600 °C). Films deposited on Si presented higher D amounts for all investigated temperatures, as well as, a higher resistance for D desorption. Moreover, HfO{sub 2} films underwent structural changes during annealings, influencing D incorporation. The semiconductor substrate plays a key role in this process.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of negative bias temperature instability dependence on fin width of silicon-on-insulator-fin-based field effect transistors

The fin width dependence of negative bias temperature instability (NBTI) of double-gate, fin-based p-type Field Effect Transistors (FinFETs) fabricated on silicon-on-insulator (SOI) wafers was investigated. The NBTI degradation increased as the fin width narrowed. To investigate this phenomenon, simulations of pre-stress conditions were employed to determine any differences in gate oxide field, fin band bending, and electric field profile as a function of the fin width. The simulation results were similar at a given gate stress bias, regardless of the fin width, although the threshold voltage was found to increase with decreasing fin width. Thus, the NBTI fin width dependence could not be explained from the pre-stress conditions. Different physics-based degradation models were evaluated using specific fin-based device structures with different biasing schemes to ascertain an appropriate model that best explains the measured NBTI dependence. A plausible cause is an accumulation of electrons that tunnel from the gate during stress into the floating SOI fin body. As the fin narrows, the sidewall device channel moves in closer proximity to the stored electrons, thereby inducing more band bending at the fin/dielectric interface, resulting in a higher electric field and hole concentration in this region during stress, which leads to more degradation. The data obtained in this work provide direct experimental proof of the effect of electron accumulation on the threshold voltage stability in FinFETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band alignment of HfO{sub 2}/Al{sub 0.25}Ga{sub 0.75}N determined by x-ray photoelectron spectroscopy: Effect of SiH{sub 4} surface treatment

The band-alignment of atomic layer deposited (ALD)-HfO{sub 2}/Al{sub 0.25}Ga{sub 0.75}N was studied by high resolution x-ray photoelectron spectroscopy measurements for both the non-passivated and SiH{sub 4} passivated AlGaN surfaces. The valence band offset and the conduction band offset for the ALD-HfO{sub 2}/Al{sub 0.25}Ga{sub 0.75}N interface were found to be 0.43 eV and 1.47 eV, respectively, for the non-passivated sample, and 0.59 eV and 1.31 eV, respectively, for the SiH{sub 4}-passivated sample. The difference in the band alignment is dominated by the band bending or band shift in the AlGaN substrate as a result of the different interlayers formed by the two surface preparations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A crystalline oxide passivation for Al{sub 2}O{sub 3}/AlGaN/GaN

In situ X-ray photoelectron spectroscopy and low energy electron diffraction are performed to study the formation of a crystalline oxide on the AlGaN surface. The oxidation of the AlGaN surface is prepared by annealing and remote N{sub 2} + O{sub 2} plasma pretreatments resulting in a stable crystalline oxide. The impact of the oxide on the interface state density is studied by capacitance voltage (C-V) measurements. It is found that a remote plasma exposure at 550 °C shows the smallest frequency dispersion. Crystalline oxide formation may provide a novel passivation method for high quality AlGaN/GaN devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial development of electrophoretically deposited graphene oxide films on Al alloys

Adhesion between film and substrate is critical for electronic device and coating applications. Interfacial development between electrophoretically deposited graphene oxide films on Al 1100 and Al 5052 alloys were investigated using FT-IR and XPS depth profiling techniques. Obtained results suggest metal ion permeation from the substrates into deposited graphene oxide films. The interface between the films and the substrates were primarily composed of Al-O-C bonds from oxygenated defects on graphene oxide plane rather than expected Al-C formation. Films heat treated at 150 °C had change in microstructure and peak shifts in XPS spectra suggesting change in chemical structure of bonds between the films and the substrates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Temporal evolution of nanoporous layer in off-normally ion irradiated GaSb

Room temperature irradiation of GaSb by 60 keV Ar{sup +}-ions at an oblique incidence of 60° leads to simultaneous formation of a nanoporous layer and undulations at the interface with the underlying substrate. Interestingly, with increasing ion fluence, a gradual embedding of the dense nanoporous layer takes place below ridge-like structures (up to the fluence of 1 × 10{sup 17} ions cm{sup −2}), which get extended to form a continuous layer (at fluences ≥4 × 10{sup 17} ions cm{sup −2}). Systematic compositional analyses reveal the co-existence of Ga{sub 2}O{sub 3} and Sb{sub 2}O{sub 3} in the surface layer. The results are discussed in terms of a competition between ion-induced defect accumulation and re-deposition of sputtered atoms on the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conduction band offset at GeO{sub 2}/Ge interface determined by internal photoemission and charge-corrected x-ray photoelectron spectroscopies

We report a consistent conduction band offset (CBO) at a GeO{sub 2}/Ge interface determined by internal photoemission spectroscopy (IPE) and charge-corrected X-ray photoelectron spectroscopy (XPS). IPE results showed that the CBO value was larger than 1.5 eV irrespective of metal electrode and substrate type variance, while an accurate determination of valence band offset (VBO) by XPS requires a careful correction of differential charging phenomena. The VBO value was determined to be 3.60 {+-} 0.2 eV by XPS after charge correction, thus yielding a CBO (1.60 {+-} 0.2 eV) in excellent agreement with the IPE results. Such a large CBO (>1.5 eV) confirmed here is promising in terms of using GeO{sub 2} as a potential passivation layer for future Ge-based scaled CMOS devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Breaking Simple Scaling Relations through Metal–Oxide Interactions: Understanding Room-Temperature Activation of Methane on M/CeO 2 (M = Pt, Ni, or Co) Interfaces

The clean activation of methane at low temperatures remains an eminent challenge and a field of competitive research. In particular, on late transition metal surfaces such as Pt(111) or Ni(111), higher temperatures are necessary to activate the hydrocarbon molecule, but a massive deposition of carbon makes the metal surface useless for catalytic activity. However, on very low-loaded M/CeO 2 (M = Pt, Ni, or Co) surfaces, the dissociation of methane occurs at room temperature, which is unexpected considering simple linear scaling relationships. This intriguing phenomenon has been studied using a combination of experimental techniques (ambient-pressure X-ray photoelectron spectroscopy, time-resolved X-ray diffraction, and X-ray absorption spectroscopy) and density functional theory-based calculations. The experimental and theoretical studies show that the size and morphology of the supported nanoparticles together with strong metal–support interactions are behind the deviations from the scaling relations. These findings point toward a possible strategy for circumventing scaling relations, producing active and stable catalysts that can be employed for methane activation and conversion.

03 NATURAL GAS↗

KTaO 3 -Based Supercurrent Diode

The supercurrent diode effect (SDE), characterized by nonreciprocal critical currents, represents a promising building block for future dissipationless electronics and quantum circuits. Realizing SDE requires breaking both time-reversal and inversion symmetry in the device. Here we use conductive atomic force microscope (c-AFM) lithography to pattern reconfigurable superconducting weak links (WLs) at the LaAlO 3 /KTaO 3 (LAO/KTO) interface. By deliberately engineering the WL geometry at the nanoscale, we realize SDE in these devices in the presence of modest out-of-plane magnetic fields. The SDE polarity can be reversed by simply changing the WL position, and the rectification efficiency reaches up to 13% under optimal magnetic field conditions. Time-dependent Ginzburg–Landau simulations reveal that the observed SDE originates from asymmetric vortex motion in the inversion-symmetry-breaking device geometry. This demonstration of SDE in the LAO/KTO system establishes a versatile platform for investigating and engineering vortex dynamics, forming the basis for engineered quantum circuit elements.

C-AFM lithography↗

Radiation-induced vacancy injection in heterogeneous multiphase materials

Understanding the synergy between corrosion and defect dynamics is a key consideration in the development of advanced materials for extreme environments. Here, we reveal a surprising phenomenon for the transport of point defects induced by irradiation in a heterogeneous multiphase structure of a metal and an oxide, similar to that formed under metal corrosion that takes place in most environments. Despite the confinement of the produced damage within the oxide, vacancies were injected into the unirradiated metal and coarsened with dose. Furthermore, the results show that the nature of the oxide layer dictates the defect evolution in the metal layer. This work reveals an interesting mechanism for point defect interactions in multiphase materials, with broad implications in many fields, while also emphasizing the complex coupling between corrosion and irradiation. Corrosion leads to the formation of multiphase materials, while irradiation enhances diffusion within the heterogeneous phases, which can impact corrosion rates.

36 MATERIALS SCIENCE↗

Understanding the role of buried interface charges in a metal-oxide-semiconductor stack of Ti/Al{sub 2}O{sub 3}/Si using hard x-ray photoelectron spectroscopy

Hard X-ray photoelectron spectroscopy (HAXPES) analyses were carried out on metal-oxide-semiconductor (MOS) samples consisting of Si, thick and thin Al{sub 2}O{sub 3}, and a Ti metal cap. Using Si 1s and C 1s core levels for an energy reference, the Al 1s and Si 1s spectra were analyzed to reveal information about the location and roles of charges throughout the MOS layers. With different oxide thicknesses (2 nm and 23 nm), the depth sensitivity of HAXPES is exploited to probe different regions in the MOS structure. Post Ti deposition results indicated unexpected band alignment values between the thin and thick films, which are explained by the behavior of mobile charge within the Al{sub 2}O{sub 3} layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗