SEARCH · Search NASA

Results for “parallel planes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

All sources NASA NTRS DOE OSTI

NASA NTRS1978

The effects of curvature and viscosity on baroclinic instability: A two-layer model

A linear stability analysis of a baroclinic zonal current contained between two parallel rigid boundaries is presented. Curvature is included by performing the analysis on a beta b-plane and viscosity by allowing for the effects of Ekman layers on the rigid boundaries. A two-layer model is used. This calculation was carried out to assist in the design of a spherical model of the general circulation of the earth's atmosphere for Spacelab. In the low-gravity environment on an orbiting vehicle, a dominant radial dielectric body force, analogous to planetary gravity, can be achieved over a volume of liquid held between two concentric spheres. The results show the Eady short wavelength cutoff, and long wavelength cutoffs due to Ekman damping and curvature.

Fowlis, W. W.↗

NASA NTRS1977

Features of sound propagation through and stability of a finite shear layer

The plane wave propagation, the stability, and the rectangular duct mode problems of a compressible, inviscid, linearly sheared, parallel, homogeneous flow are shown to be governed by Whittaker's equation. The exact solutions for the perturbation quantities are essentially the Whittaker M-functions where the nondimensional quantities have precise physical meanings. A number of known results are obtained as limiting cases of the exact solutions. For the compressible finite thickness shear layer it is shown that no resonances and no critical angles exist for all Mach numbers, frequencies, and shear layer velocity profile slopes except in the singular case of the vortex sheet.

Koutsoyannis, S. P.↗

NASA NTRS1982

Velocity and flow angle measurements in the Langley 0.3-meter transonic cryogenic tunnel using a laser transit anemometer

The Laser Transit Anemometer (LTA) system is described. In the LTA system two parallel laser beams of known separation and cross sectional area are focussed at the same location or plane. When a particle in a flow field passes through both beams and the time is recorded for its transit (time of flight), its velocity can be calculated knowing the distance between the beams. By rotating the two beams (spots) around a common center and recording the number of valid events (a particle which passes through both spots in the proper sequence) at each angle the flow angle can be determined by curve fitting a predetermined number of angles or points and calculating the peak of what should be a Gaussian curve. The best angle or flow angle is defined as the angle at which the maximum number of valid events occurs. The LTA system functioned properly although conditions were less than desirable.

Honaker, W. C.↗

NASA NTRS1987

Generation of spiral bevel gears with conjugate tooth surfaces and tooth contact analysis

A new method for generation of spiral bevel gears is proposed. The main features of this method are as follows: (1) the gear tooth surfaces are conjugated and can transform rotation with zero transmission errors; (2) the tooth bearing contact is localized; (3) the center of the instantaneous contact ellipse moves in a plane that has a fixed orientation; (4) the contact normal performs in the process of meshing a parallel motion; (5) the motion of the contact ellipse provides improved conditions of lubrication; and (6) the gears can be manufactured by use of Gleason's equipment.

Litvin, Faydor L.↗

NASA NTRS2001

The Action of Pressure-Radiation Forces on Pulsating Vapor Bubbles

The action of pressure-radiation (or Bjerknes) forces on gas bubbles is well understood. This paper studies the analogous phenomenon for vapor bubbles, about which much less is known. A possible practical application is the removal of boiling bubbles from the neighborhood of a heated surface in the case of a downward facing surface or in the absence of gravity. For this reason, the case of a bubble near a plane rigid surface is considered in detail. It is shown that, when the acoustic wave fronts are parallel to the surface, the bubble remains trapped due to secondary Bjerknes force caused by an "image bubble." When the wave fronts are perpendicular to the surface, on the other hand, the bubble can be made to slide laterally.

Hao, Y.↗

NASA NTRS2022

Statistical Properties of the Population of the Galactic Center Filaments II: The Spacing between Filaments

We carry out a population study of magnetized radio filaments in the Galactic centre using MeerKAT data by focusing on the spacing between the filaments that are grouped. The morphology of a sample of 43 groupings containing 174 magnetized radio filaments are presented. Many grouped filaments show harp-like, fragmented cometary tail-like, or loop-like structures in contrast to many straight filaments running mainly perpendicular to the Galactic plane. There are many striking examples of a single filament splitting into two prongs at a junction, suggestive of a flow of plasma along the filaments. Spatial variations in spectral index, brightness, bending, and sharpening along the filaments indicate that they are evolving on a 105−6-yr time-scale. The mean spacings between parallel filaments in a given grouping peaks at ∼16 arcsec. We argue by modeling that the filaments in a grouping all lie on the same plane and that the groupings are isotropically oriented in 3D space. One candidate for the origin of filamentation is interaction with an obstacle, which could be a compact radio source, before a filament splits and bends into multiple filaments. In this picture, the obstacle or sets the length scale of the separation between the filaments. Another possibility is synchrotron cooling instability occurring in cometary tails formed as a result of the interaction of cosmic ray driven Galactic centre outflow with obstacles such as stellar winds. In this picture, the mean spacing and the mean width of the filaments are expected to be a fraction of a parsec, consistent with observed spacing.

plasmas↗

NASA NTRS1972

Electromagnetic diffraction by plane reflection diffraction gratings

A plane wave theory was developed to study electromagnetic diffraction by plane reflection diffraction gratings of infinite extent. A computer program was written to calculate the energy distribution in the various orders of diffraction for the cases when the electric or magnetic field vectors are parallel to the grating grooves. Within the region of validity of this theory, results were in excellent agreement with those in the literature. Energy conservation checks were also made to determine the region of validity of the plane wave theory. The computer program was flexible enough to analyze any grating profile that could be described by a single value function f(x). Within the region of validity the program could be used with confidence. The computer program was used to investigate the polarization and blaze properties of the diffraction grating.

Bocker, R. P.↗

NASA NTRS1987

Optical Interferometric Parallel Data Processor

Image data processed faster than in present electronic systems. Optical parallel-processing system effectively calculates two-dimensional Fourier transforms in time required by light to travel from plane 1 to plane 8. Coherence interferometer at plane 4 splits light into parts that form double image at plane 6 if projection screen placed there.

Breckinridge, J. B.↗

NASA NTRS1987

Parallel Analog-to-Digital Image Processor

Proposed integrated-circuit network of many identical units convert analog outputs of imaging arrays of x-ray or infrared detectors to digital outputs. Converter located near imaging detectors, within cryogenic detector package. Because converter output digital, lends itself well to multiplexing and to postprocessing for correction of gain and offset errors peculiar to each picture element and its sampling and conversion circuits. Analog-to-digital image processor is massively parallel system for processing data from array of photodetectors. System built as compact integrated circuit located near local plane. Buffer amplifier for each picture element has different offset.

Lokerson, D. C.↗

NASA NTRS1988

Satellite observations of a new type of discrete VLF emission at L below 4

A new type of discrete whistler mode emission has been observed in the magnetosphere at L below 4. The emission elements are confined to a bandwidth of 1-5 kHz, with the lower cutoff frequency of the band varying with L shell, being equal to about 0.2-0.5 f(Heq), where f(Heq) is the equatorial electron gyrofrequency. The discrete and burstlike nature of the emissions is similar to that of chorus emissions typically observed at higher L; however, dispersion of individual elements is often different from typical chorus, and the emissions are observed inside as well as outside the plasmapause. The phenomenon seems to occur mainly in the early morning local time sector and is well correlated with geomagnetic activity, occurring mostly at high gasmagnetic activity. The analysis of data from the low-altitude ISIS-2 and the high-altitude De-1 satellites indictes that the emissions may be generated near the equatorial plane at frequencies of about 0.2 f(Heq) inside and about 0.35 f(Heq) outside the plasmapause. The parallel energy of electrons for gyroresonance with the observed waves is found to be about 20-50 keV in both cases.

Poulsen, W. L.↗

NASA NTRS1988

Geology and geochemistry of the Middle Proterozoic Eastern Ghat mobile belt and its comparison with the lower crust of the Southern Peninsular shield

Two prominent rock suites constitute the lithology of the Eastern Ghat mobile belt: (1) the khondalite suite - the metapelites, and (2) the charnockite suite. Later intrusives include ultramafic sequences, anorthosites and granitic gneisses. The chief structural element in the rocks of the Eastern Ghats is a planar fabric (gneissosity), defined by the alignment of platy minerals like flattened quartz, garnet, sillimanite, graphite, etc. The parallelism between the foliation and the lithological layering is related to isoclinal folding. The major structural trend (axial plane foliation trend) observed in the belt is NE-SW. Five major tectonic events have been delineated in the belt. A boundary fault along the western margin of the Eastern Ghats, bordering the low grade terrain has been substantiated by recent gravity and the deep seismic sounding studies. Field evidence shows that the pyroxene granulites (basic granulites) post-date the khondalite suite, but are older than the charnockites as well as the granitic gneisses. Polyphase metamorphism, probably correlatable with different periods of deformation is recorded. The field relations in the Eastern Ghats point to the intense deformation of the terrain, apparently both before, during and after metamorphism.

Rao, M. V. Subba↗

NASA NTRS1991

Mach 4 and Mach 8 axisymmetric nozzles for a shock tunnel

The performance of two axisymmetric nozzles which were designed to produce uniform, parallel flow with nominal Mach numbers of 4 and 8 is examined. A free-piston-driven shock tube was used to supply the nozzle with high-temperature, high-pressure test gas. The inviscid design procedure treated the nozzle expansion in two stages. Close to the nozzle throat, the nozzle wall was specified as conical and the gas flow was treated as a quasi-one-dimensional chemically-reacting flow. At the end of the conical expansion, the gas was assumed to be calorically perfect, and a contoured wall was designed (using method of characteristics) to convert the source flow into a uniform and parallel flow at the end of the nozzle. Performance was assessed by measuring Pitot pressures across the exit plane of the nozzles and, over the range of operating conditions examined, the nozzles produced satisfactory test flows. However, there were flow disturbances in the Mach 8 nozzle flow that persisted for significant times after flow initiation.

Jacobs, P. A.↗

NASA NTRS1991

Mach 4 and Mach 8 axisymmetric nozzles for a high-enthalpy shock tunnel

Jacobs, P. A.↗

NASA NTRS1992

Growth and decay of disturbances in stratified shear flow in a rotating frame

The stability of stratified plane Couette flow in a rotating frame is investigated for a case in which the gravitational force is parallel to the rotation vector. Partial differential equations describing the behavior of disturbances in the linear regime are derived. Unstratified flow is stable as long as the angular momentum gradient is positive. If the gradient is negative, nonaxisymmetric disturbances grow as a power law in time, if the gradient is sufficiently steep. In flow which is unstable to convection, all perturbations asymptotically grow at the rate given by the Brunt-Vaisala frequency. If heat diffusion is included, all nonaxisymmetric perturbations now eventually decay as t exp -2, even if the flow is unstable to convection. If heat diffusion and viscosity are weak, nonaxisymmetric disturbances in convectively unstable flow will undergo a large transient growth before their eventual decay.

Korycansky, D. G.↗

NASA NTRS2006

Phased-Array Study of Dual-Flow Jet Noise: Effect of Nozzles and Mixers

A 16-microphone linear phased-array installed parallel to the jet axis and a 32-microphone azimuthal phased-array installed in the nozzle exit plane have been applied to identify the noise source distributions of nozzle exhaust systems with various internal mixers (lobed and axisymmetric) and nozzles (three different lengths). Measurements of velocity were also obtained using cross-stream stereo particle image velocimetry (PIV). Among the three nozzle lengths tested, the medium length nozzle was the quietest for all mixers at high frequency on the highest speed flow condition. Large differences in source strength distributions between nozzles and mixers occurred at or near the nozzle exit for this flow condition. The beamforming analyses from the azimuthal array for the 12-lobed mixer on the highest flow condition showed that the core flow and the lobe area were strong noise sources for the long and short nozzles. The 12 noisy spots associated with the lobe locations of the 12-lobed mixer with the long nozzle were very well detected for the frequencies 5 KHz and higher. Meanwhile, maps of the source strength of the axisymmetric splitter show that the outer shear layer was the most important noise source at most flow conditions. In general, there was a good correlation between the high turbulence regions from the PIV tests and the high noise source regions from the phased-array measurements.

Soo Lee, Sang↗

NASA NTRS2008

ART-XC: A Medium-energy X-ray Telescope System for the Spectrum-R-Gamma Mission

The ART-XC instrument is an X-ray grazing-incidence telescope system in an ABRIXAS-type optical configuration optimized for the survey observational mode of the Spectrum-RG astrophysical mission which is scheduled to be launched in 2011. ART-XC has two units, each equipped with four identical X-ray multi-shell mirror modules. The optical axes of the individual mirror modules are not parallel but are separated by several degrees to permit the four modules to share a single CCD focal plane detector, 1/4 of the area each. The 450-micron-thick pnCCD (similar to the adjacent eROSITA telescope detector) will allow detection of X-ray photons up to 15 keV. The field of view of the individual mirror module is about 18 x 18 arcminutes(exp 2) and the sensitivity of the ART-XC system for 4 years of survey will be better than 10(exp -12) erg s(exp -1) cm(exp -2) over the 4-12 keV energy band. This will allow the ART-XC instrument to discover several thousand new AGNs.

Arefiev, V.↗

NASA NTRS2010

Concerning the Motion of FTEs and Attendant Signatures

We employ the Cooling et al. [2001] model to predict the location, orientation, and motion of flux transfer events (FTEs) generated along finite length component and anti parallel reconnection lines for typical solar wind plasma conditions and various interplanetary magnetic field (IMF) orientations in the plane perpendicular to the SunEarth line at the solstices and equinoxes. For duskward and northward or southward IMF orientations, events formed by component reconnection originate along reconnection curves passing through the sub solar point that tilt from southern dawn to northern dusk. They maintain this orientation as they move either northward into the northern dawn quadrant or southward into the southern dusk quadrant. By contrast, events formed by antiparallel reconnection originate along reconnection curves running from northern dawn to southern dusk in the southern dawn and northern dusk quadrants and maintain these orientations as they move anti sunward into both these quadrants. Although both the component and antiparallel reconnection models can explain previously reported event orientations on the southern dusk magnetopause during intervals of northward and dawn ward IMF orientation, only the component model explains event occurrence near the subsolar magnetopause during intervals when the IMF does not point due southward.

Sibeck, David G.↗

NASA NTRS1990

Wideband arrays with variable element sizes

A new planar array architecture based on adding half-sized elements in between the other elements in order to extend the frequency by one octave is proposed and validated. This wideband array with variable element sizes (WAVES) antenna is shown by calculations and by measurements using Archimedean spirals to be the elements necessary to maintain a simple clean mainbeam and principal plane sidelobes below about -10 dB over two octaves. In spite of using a test antenna with a simple parallel feed and no impedance matching or isolation, the agreement between predicted and measured results is good.

Shively, D. G.↗