Search NASA⌕ Search

SEARCH · Search NASA

Results for “rendering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Structure and photoluminescence properties of nanocrystal Eu{sup 3+}-doped gadolinium tungsten red emitting phosphors excited by blue light

Highlights: ► We get a series of Eu{sup 3+} doped tungstate phosphors with a wide range doping level. ► Different doping level leads to different crystal structures of final productions. ► Gd{sub 6}WO{sub 12}-like with a tetragonal lattice structure grows at low doping level. ► Gd{sub 2}WO{sub 6}-like with a monoclinic lattice structure grows at high doping level. ► The doping level at 40 mol% Eu{sup 3+} excited by blue light shows excellent red emission. -- Abstract: A co-precipitation reaction was used to prepare nanocrystal Gd{sub 6}WO{sub 12}:Eu{sup 3+} and Gd{sub 2}WO{sub 6}:Eu{sup 3+} red emitting phosphor powders with different Eu{sup 3+} doping levels. It is found that under the same preparation conditions, different doping level leads to different crystal structures; Gd{sub 6}WO{sub 12}-like with a tetragonal lattice structure tends to be synthesized at low doping level (10–40 mol%) yet Gd{sub 2}WO{sub 6}-like with a monoclinic lattice structure easily to grow at high doping level (60–80 mol%). The strong red emission of {sup 5}D{sub 0} → {sup 7}F{sub 2} transitions at 620 nm was observed for all powders under either near ultraviolet or blue light excited and the most intense emission was obtained at the concentration of 40 mol%. This kind of powders might find their promising application to compensate the white LEDs for the lack of red light component and to improve rendering index.

36 MATERIALS SCIENCE↗

Luminescent properties of phosphor converted LED using an orange-emitting Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor

Graphical abstract: Display Omitted Highlights: ► Phase-pure Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} powders were synthesized by a solid state reaction process. ► The optimum emission intensity was observed at the Eu{sup 2+} ion concentration of 0.006. ► The dipole–dipole interaction was the major concentration quenching mechanism. ► The pc-LED coated with Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} had higher CRI than commercial red phosphor. -- Abstract: A series of orange-emitting Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphors were synthesized by a conventional solid-state reaction method. The as-prepared phosphors were characterized by X-ray powder diffraction (XRD), fluorescence spectroscopy, and spectroradiometry. XRD showed that all prepared samples exhibited a monoclinic Rb{sub 2}CaP{sub 2}O{sub 7} phase. Fluorescence spectroscopy showed that the photoluminescence efficiency of Rb{sub 2}Ca{sub 1−x}P{sub 2}O{sub 7}:Eu{sub x}{sup 2+} phosphors increased with increasing Eu{sup 2+} concentration until x = 0.006, then decreased at higher concentrations, due to a concentration quenching effect. The thermal activation energy was also measured to be 0.40 eV. Furthermore, a phosphor-converted LED (pc-LED) coated with Rb{sub 2}Ca{sub 0.994}P{sub 2}O{sub 7}:Eu{sub 0.006}{sup 2+} was fabricated, which exhibited bright orange emission under a forward bias, from 200 to 300 mA. The color rendering index (CRI) of pc-LED coated with Rb{sub 2}Ca{sub 0.994}P{sub 2}O{sub 7}:Eu{sub 0.006}{sup 2+} was higher than the CRI of pc-LED coated with commercial red phosphor, due to the broad emission band of Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor. In applying with three-band pc-LEDs, moreover, white pc-LED using Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor had a higher CRI, than using commercial phosphor. These results indicated that Rb{sub 2}CaP{sub 2}O{sub 7}:Eu{sup 2+} phosphor could be a good candidate for a near-UV based w-LED.

36 MATERIALS SCIENCE↗

Synthesis and optical properties of cadmium selenide quantum dots for white light-emitting diode application

Highlights: ► Stable CdSe QDs were synthesized by the one-step and two-level process respectively. ► The fabricated white LEDs show good white balance. ► CdSe QDs present well green to yellow band luminescence. ► CdSe QDs displayed a broad excitation band. - Abstract: Yellow light-emitting cadmium selenide quantum dots were synthesized using one-step and two-step methods in an aqueous medium. The structural luminescent properties of these quantum dots were investigated. The obtained cadmium selenide quantum dots displayed a broad excitation band suitable for blue or near-ultraviolet light-emitting diode applications. White light-emitting diodes were fabricated by coating the cadmium selenide samples onto a 460 nm-emitting indium gallium nitrite chip. Both samples exhibited good white balance. Under a 20 mA working current, the white light-emitting diode fabricated via the one-step and two-step methods showed Commission Internationale de l’Éclairage coordinates at (0.27, 0.23) and (0.27, 0.33), respectively, and a color rendering index equal to 41 and 37, respectively. The one-step approach was simpler, greener, and more effective than the two-step approach. The one-step approach can be enhanced by combining cadmium selenide quantum dots with proper phosphors.

36 MATERIALS SCIENCE↗

Synthesis of graphene platelets by chemical and electrochemical route

Graphical abstract: A schematic showing the overall reduction process of graphite to reduced graphene platelets by chemical and electrochemical route. - Highlights: • Graphene was prepared by diverse routes viz. chemical and electrochemical methods. • NaBH{sub 4} was effective for removing oxygen functional groups from graphene oxide. • Sodium borohydride reduced graphene oxide (SRGO) showed high specific capacitance. • Electrochemical rendered a cheap route for production of graphene in powder form. - Abstract: Graphene platelets were synthesized from graphene oxide by chemical and electrochemical route. Under the chemical method, sodium borohydride and hydrazine chloride were used as reductants to produce graphene. In this paper, a novel and cost effective electrochemical method, which can simplify the process of reduction on a larger scale, is demonstrated. The electrochemical method proposed in this paper produces graphene in powder form with good yield. The atomic force microscopic images confirmed that the graphene samples prepared by all the routes have multilayers of graphene. The electrochemical process provided a new route to make relatively larger area graphene sheets, which will have interest for further patterning applications. Attempt was made to quantify the quantum of reduction using cyclic voltammetry and choronopotentiometry techniques on reduced graphene samples. As a measure in reading the specific capacitance values, a maximum specific capacitance value of 265.3 F/g was obtained in sodium borohydride reduced graphene oxide.

36 MATERIALS SCIENCE↗

Magnetic-field-induced synthesis of Fe{sub 3}O{sub 4} nanorods by a gas–liquid interfacial process: Microstructure control, magnetic and photocatalytic properties

Highlights: • Fe{sub 3}O{sub 4} nanorods were synthesized via a MFI gas–liquid interfacial route. • The morphology of the Fe{sub 3}O{sub 4} nanoparticle can be changed during its growth process. • MF render Fe{sub 3}O{sub 4} nanorods higher degree of crystallinity and better magnetic property. - Abstract: In this paper, we designed a magnetic field (MF) induced gas–liquid interface route to synthesize magnetic Fe{sub 3}O{sub 4} nanorods (NRs). The results showed that the MF can significantly affect the morphology of the particles. In this original method, only relatively inexpensive and environmental chemicals were used. The structure and morphology of the Fe{sub 3}O{sub 4} NRs were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometry technique. The crystal growth mechanisms in the magnetic field induced process were expounded in detail. The as-synthesized Fe{sub 3}O{sub 4} NRs were successfully used as a catalytic carrier for the photo degradation of phenol.

36 MATERIALS SCIENCE↗

Silica coating of luminescent quantum dots prepared in aqueous media for cellular labeling

Graphical abstract: A facile route based on modified Stöber method was used for the synthesis of silica coated QDs (QD@SiO{sub 2}) starting from aqueously prepared CdTe/CdS QDs. The resultant QD@SiO{sub 2} exhibited a significant increase in emission efficiency compared with that of the initial QDs, along with a small size (∼5 nm in diameter), great stability and low cytotoxicity, which makes it a good candidate as robust biomarker. - Highlights: • We present a facile modified Stöber method to prepare highly luminescent QD@SiO{sub 2}. • The PL efficiency of QDs increases significantly after silica coating. • QD@SiO{sub 2} exhibits small size (∼5 nm) and great dispersibility in aqueous solution. • QD@SiO{sub 2} presents extraordinary photo and colloidal stability. • The silica shell eliminates QD cytotoxicity, providing the access of bioconjugation. - Abstract: Silica coating is an effective approach for rendering luminescent quantum dots (QDs) with water dispersibility and biocompatibility. However, it is still challenging to prepare silica-coated QDs (QD@SiO{sub 2}) with high emission efficiency, small size and great stability in favor for bioapplication. Herein, we reported a modified Stöber method for silica coating of aqueously-prepared CdTe/CdS QDs. With the coexistence of Cd{sup 2+} and thioglycolic acid (TGA), a thin silica shell was formed around QDs by the hydrolysis of tetraethyl orthosilicate (TEOS). The resultant QD@SiO{sub 2} with a small size (∼5 nm in diameter) exhibits significantly higher emission efficiencies than that of the initial QDs. Also, QD@SiO{sub 2} has extraordinary photo and colloidal stability (pH range of 5–13, 4.0 M NaCl solution). Protected by the silica shell, the cytotoxicity of QDs could be reduced. Moreover, the QD@SiO{sub 2} conjugated with folic acid (FA) presents high specific binding toward receptor-positive HeLa cells over receptor-negative A549 cells.

36 MATERIALS SCIENCE↗

Preparation and characterization of bifunctional dendrimer modified Fe{sub 3}O{sub 4}/CdTe nanoparticles with both luminescent and superparamagnetic properties

Highlights: • The fluorescent superparamagnetic dendrimeric Fe{sub 3}O{sub 4}/CdTe nanoparticles are synthesized in this paper. • The synthesized nanocomposites maintain excellent magnetic properties. • The synthesized nanocomposites maintain highly luminescent markers with narrow emission bands. - Abstract: Magnetic nanoparticles Fe{sub 3}O{sub 4} were prepared by hydrothermal coprecipitation of ferric and ferrous ions using NaOH. The surface modification of Fe{sub 3}O{sub 4} nanoparticle by dendrimers has rendered the nanoparticle surface with enriched amine groups which facilitated the adsorption and conjugation of thioglycolic acid (TGA) modified CdTe quantum dots to form a stable hybrid nanostructure. Three generations (first generation: G0F, second generation: G1F, third generation: G3F) of bifunctional dendrimeric Fe{sub 3}O{sub 4}/CdTe nanoparticles were successfully prepared using this technique and characterized by microscopy. The optical and magnetic properties of the dendrimeric Fe{sub 3}O{sub 4}/CdTe nanoparticle were also investigated. The microscopic study reveals 3 different sizes for 3 generations, 16 nm (G0F), 31 nm (G1F) and 47 nm (G3F). Among three generations of nanoparticles, the G1F has the best optical property with a luminescent quantum yield of 25.6% and the G0F has the best magnetic property with a saturation magnetization of 19.3 emμ/g.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A single-phase Ba{sub 9}Lu{sub 2}Si{sub 6}O{sub 24}:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor with tunable full-color emission for NUV-based white LED applications

Highlights: • A single phase Ba{sub 9}Lu{sub 2}Si{sub 6}O{sub 24}:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor with full-color emission was obtained by solid-state reactions. • Eu{sup 2+}, Ce{sup 3+}, and Mn{sup 2+} acts as blue, green, and red luminescence centers, respectively. • The BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor shows a high quantum efficient of ∼62% and a good color stability. • Combining this single phosphor with a 395 nm NUV-chip, an ideal white LED with a high CRI of 85 and a CCT of 6300 K was obtained. - Abstract: We obtained a single phase BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor by solid-state reactions. Eu{sup 2+}, Ce{sup 3+}, and Mn{sup 2+} gives rise to the blue, green, and red emission, respectively. The Mn{sup 2+} red emission can be effectively enhanced via energy transfers from both Eu{sup 2+} and Ce{sup 3+}. Thus a tunable full color emission from 410 to 750 nm was realized in this single phosphor. The Eu{sup 2+} → Mn{sup 2+} energy transfer mechanism was investigated by the fluorescence decay curves. This single phosphor exhibits an efficient excitation band covering from 390 to 410 nm, which matches well with the emission light of the efficient NUV chips. The optimized BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} phosphor shows a high quantum efficient of ∼62% and a good color stability. When this single phosphor was combined with a 395 nm NUV-chip, an ideal white LED with a high color render index (CRI) of 85 and a correlated color temperature (CCT) of 6300 K was obtained. This demonstrates the promising application of the BLS:Eu{sup 2+}, Ce{sup 3+}, Mn{sup 2+} single phosphor for the NUV-based white LEDs.

36 MATERIALS SCIENCE↗

Fabrication of nanoplate-like g-C{sub 3}N{sub 4}/Bi{sub 12}TiO{sub 20} heterojunction with enhanced visible-light photocatalytic activity

Highlights: • G-C{sub 3}N{sub 4}/Bi{sub 12}TiO{sub 20} heterojunction was fabricated by a hydrothermal-annealing method. • Heterojunction structure accelerates the separation of photo-generated carriers. • Match in energy band renders the heterojunction excellent photocatalytic activity. • Rhodamine B can be mostly degraded by the heterojunction in 5 h under visible light. - Abstract: In recent years, the high-efficient visible-light-driven photocatalyst has become a research focus to realize the large-scale application of semiconductor photocatalysis. Herein, a novel nanoplate-like g-C{sub 3}N{sub 4}/Bi{sub 12}TiO{sub 20} (CN/BTO) heterojunction was prepared by a facile hydrothermal-annealing method for visible-light photocatalysis, and its morphology, structure and optical property were characterized systematically. The characterization results verify that the C−O bond exists between g-C{sub 3}N{sub 4} and BTO, thus confirming the formation of CN−BTO heterojunction. Furthermore, the CN/BTO heterojunctions display much higher photocatalytic performance for Rhodamine B (RhB) degradation than pure BTO and g-C{sub 3}N{sub 4} under visible light irradiation. Among them, the CN/BTO-3 sample with 60 wt% of g-C{sub 3}N{sub 4} exhibits the highest photocatalytic activity. The excellent photocatalytic activity can be primarily attributed to the energy band match and the heterojunction that can accelerate the migration and separation of photo-generated charge carriers. This kind of nanoplate-like CN/BTO heterojunction may find potential applications in numerous fields related to environment and energy.

36 MATERIALS SCIENCE↗

Enhanced red emission induced by Tb{sup 3+} doping in europium-based molybdate phosphors

Graphical abstract: The introduction of Tb3+ significantly enhances the red emission of Eu3+ in europium-based molybdate phosphors. The enhanced red emission intensity is discussed by the relaxation of parity-forbidden selection rules of Eu3+ ions, whereas the contribution of Tb3+ → Eu3+ energy transfer is little in our case. - Highlights: • The introduction of Tb{sup 3+} significantly enhances the red emission of Eu{sup 3+} in europium-based molybdate phosphors. • At x = 0.02, the red-emitting intensity of LiEuMo{sub 2}O{sub 8} is enhanced by 30% under excitation at ultraviolet light 395 nm. • The enhanced red emission intensity is discussed by the relaxation of parity-forbidden selection rules of Eu{sup 3+} ions, whereas the contribution of Tb{sup 3+} → Eu{sup 3+} energy transfer is little in our case. - Abstract: A series of Tb{sup 3+}-doped europium-based molybdate red-emitting phosphors (LiEuMo{sub 2}O{sub 8}) were prepared by solid-state reaction method, their crystal structure and luminescence properties have been investigated by X-ray diffraction, micro-Raman spectra, diffuse reflectance spectra, photoluminescence and photoluminescence excitation spectra. Partial substitution of Li{sup +} by Tb{sup 3+} slightly distorts the host lattice, red-shifts the absorption edge of host and improves Eu{sup 3+} red-emitting intensity in LiEuMo{sub 2}O{sub 8} compound. The red-emitting intensity of LiEuMo{sub 2}O{sub 8} powder is enhanced by 30% at the doping level of 0.02 under excitation at 395 nm. In present study, we found that the contribution of Tb{sup 3+} → Eu{sup 3+} energy transfer to the enhanced Eu{sup 3+} emission is little since the Tb{sup 3+} ions are not responsive to the near ultraviolet (∼395 nm), the enhanced red emission is tentatively ascribed to the relaxation of parity-forbidden selection rules of Eu{sup 3+} ions. White light-emitting diodes are fabricated by using near ultraviolet light-emitting diode chips (∼395 nm) and the blends of the commercial blue, green and as-prepared red Li{sub 0.98}Tb{sub 0.02}EuMo{sub 2}O{sub 8} phosphor, the resulting white light-emitting diode shows a color-rendering index of 93.5, luminous efficacy of 14 lm/W and chromaticity coordinates of (0.292, 0.329).

36 MATERIALS SCIENCE↗

Al-doped ZnS shell as a surface shield for enhancing the stability of Cu:ZnInS/ZnS/ZnS:Al quantum dots and their application in light emitting diodes

Graphical abstract: The normalized electroluminescence spectra of Cu:ZnInS@ZnS:Al (a) and Cu:ZnInS@ZnS quantum dot based LEDs under an injection current of 10 mA for various operation times are presented. The quantum dots were mixed with same amount of silicone resin and treated at 50 °C for 30 min. - Highlights: • The self-passivated Cu:ZnInS@ZnS:Al quantum dots were synthesized successfully. • The thermal and current stability of Cu:ZnInS@ZnS:Al quantum dots were improved. • The Cu:ZnInS@ZnS:Al quantum dots had a small reduction of 20% in PL lifetime under thermal annealing from 50 °C to 250 °C. • The Cu:ZnInS@ZnS:Al quantum dot based LED had a 3% luminescence enhancement under 10 mA injection current for a long time. - Abstract: Cu:ZnInS/ZnS/ZnS:Al quantum dots (QDs) with a Cu-doped inner core and an Al-doped outer shell were synthesized in this work, exhibiting improved stability of luminescence, compared with Cu:ZnInS/ZnS/ZnS QDs. The X-ray diffraction patterns and photoluminescence spectra confirmed that the Al ions were doped into the ZnS shell. The stability of Cu:ZnInS/ZnS/ZnS:Al QDs under various thermal annealing temperatures was studied by steady-state and time resolved photoluminescence spectroscopy. The Cu:ZnInS/ZnS/ZnS:Al QDs had a relatively small reduction of 20% in photoluminescence lifetime from 167 ns under thermal annealing at 50 °C to 132.8 ns at 250 °C, compared to a 55% drop for the undoped ones, indicating less thermal effect on the photoluminescence of the QDs with an Al-doped shell. The Cu:ZnInS/ZnS/ZnS:Al QD-based light emitting diodes (LEDs) had a 3% luminescence enhancement under injection current of 10 mA for 30 h, compared to a 13% reduction for the undoped QDs, suggesting improved thermal stability of photoluminescence for the QDs with Al-doped shell. Finally, Cu:ZnInS/ZnS/ZnS:Al QD-based white LEDs with good color rendering index (>80) and correlated color temperature (<4500 K) were fabricated by combining with green emitting CuInS{sub 2}/ZnS QDs. The self-passivated QDs show promises for enhancing thermal stability of QD-based LEDs in the conserved energy lighting industry.

36 MATERIALS SCIENCE↗

Design and synthesis of N-doped mesoporous carbon@ NiCo2O4 nanocomposites with various morphologies for high electrochemical performance applied in supercapacitors

Highlights: • Various morphologies of N-doped mesoporous carbon@ NiCo{sub 2}O{sub 4}, such as sea urchins-like structure NiCo{sub 2}O{sub 4}, litchi chinensis-like structure of 0.1 g NC@ NiCo{sub 2}O{sub 4} and waxyberry-like structure of 0.2 g NC@ NiCo{sub 2}O{sub 4} are successfully synthesized by a facile hydrothermal method. • Waxberry-like structure of 0.2 g NC@ NiCo{sub 2}O{sub 4} shows the best electrochemical performancee among these three structures. • Waxberry-like structure of 0.2 g NC@ NiCo{sub 2}O{sub 4} has a considerable specific capacitance of 1624 F g{sup −1} at a current density of 1A g{sup −1} with superior electrochemical stability after 10000 cycles. - Abstract: Hybrid nanostructures of N-doped mesoporous carbon@NiCo{sub 2}O{sub 4} with controllable compositions are prepared by a facile hydrothermal method. Various morphologies of N-doped mesoporous carbon@NiCo{sub 2}O{sub 4} are successfully synthesized including sea urchins-like structure of free NiCo{sub 2}O{sub 4}, litchi chinensis-like structure of NC-100@ NiCo{sub 2}O{sub 4} and waxberry-like structure of NC-200@ NiCo{sub 2}O{sub 4}. All samples exhibit excellent rate capability and cycle stability. The incorporation of N-doped mesoporous carbon causes a dominant capacitance increase. Free NiCo{sub 2}O{sub 4} only possesses a specific capacitance of 1038 F g{sup −1} at 1 A g{sup −1}, while NC-200@ NiCo{sub 2}O{sub 4} renders a much higher specific capacitance of 1624 F g{sup −1}, which shows a distinct improvement of 56.4%. Moreover, NC-200@ NiCo{sub 2}O{sub 4} still performs a high specific capacitance of 1360 F g{sup -1} even at a high current density of 10 A g{sup −1}. Besides, the final capacitance can still maintain 94.3% of the initial capacitance even after 10,000 cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Sulvanite (Cu 3 VS 4 ) nanocrystals for printable thin film photovoltaics

Copper Vanadium Sulfide (Cu 3 VS 4 ), also known as sulvanite, has recently emerged as a suitable absorber material for thin film photovoltaics. The synthesis of Cu 3 VS 4 nanocrystals via a rapid solvothermal route is reported for the first time. The phase purity of the Cu 3 VS 4 nanocrystals has been confirmed by X-ray powder diffraction (XRD) and Raman spectroscopy, while the nanoparticle size, of about 10 nm, was evaluated by transmission electron microscopy (TEM). Successful ligand exchange with sulfide, an inorganic ligand, demonstrated that the nanoparticles are amenable to surface modifications, key element in solution processing. Further annealing of as-synthesized nanocrystals under a sulfur/argon atmosphere at 600 °C, rendered highly crystalline Cu 3 VS 4 powders exhibiting an impurity that could be potentially mitigated by annealing temperature optimization. Furthermore, Cu 3 VS 4 , formed solely from Earth-abundant elements, could provide an inexpensive, reliable approach to fabricating solution processed thin film photovoltaic absorbers.

36 MATERIALS SCIENCE↗

Sustainable materials acceleration platform reveals stable and efficient wide-bandgap metal halide perovskite alloys

The vast chemical space of emerging semiconductors, like metal halide perovskites, and their varied requirements for semiconductor applications have rendered trial-and-error environmentally unsustainable. Here, in this work, we demonstrate RoboMapper, a materials acceleration platform (MAP), that achieves 10-fold research acceleration by formulating and palletizing semiconductors on a chip, thereby allowing high-throughput (HT) measurements to generate quantitative structure-property relationships (QSPRs) considerably more efficiently and sustainably. We leverage the RoboMapper to construct QSPR maps for the mixed ion FA 1-y Cs y Pb(I 1-x Br x ) 3 halide perovskite in terms of structure, bandgap, and photostability with respect to its composition. We identify wide-bandgap alloys suitable for perovskite-Si hybrid tandem solar cells exhibiting a pure cubic perovskite phase with favorable defect chemistry while achieving superior stability at the target bandgap of ~1.7 eV. RoboMapper’s palletization strategy reduces environmental impacts of data generation in materials research by more than an order of magnitude, paving the way for sustainable data-driven materials research.

36 MATERIALS SCIENCE↗

Vaccination compartmental epidemiological models for the delta and omicron SARS-CoV-2 variants

We explore the inclusion of vaccination in compartmental epidemiological models concerning the delta and omicron variants of the SARS-CoV-2 virus that caused the COVID-19 pandemic. We expand on our earlier compartmental-model work by incorporating vaccinated populations. We present two classes of models that differ depending on the immunological properties of the variant. The first one is for the delta variant, where we do not follow the dynamics of the vaccinated individuals since infections of vaccinated individuals were rare. The second one for the far more contagious omicron variant incorporates the evolution of the infections within the vaccinated cohort. We explore comparisons with available data involving two possible classes of counts, fatalities and hospitalizations. We present our results for two regions, Andalusia and Switzerland (including the Principality of Liechtenstein), where the necessary data are available. In the majority of the considered cases, the models are found to yield good agreement with the data and have a reasonable predictive capability beyond their training window, rendering them potentially useful tools for the interpretation of the COVID-19 and further pandemic waves, and for the design of intervention strategies during these waves.

60 APPLIED LIFE SCIENCES↗

Enhancing membrane performance for CO 2 capture from flue gas with ultrahigh MW polyvinylamine

Membranes for post-combustion CO 2 capture are required to have a high CO 2 permeance due to the limited driving force. For facilitated transport membranes synthesized with polyvinylamine (PVAm), a defect-free selective layer of <200 nm is usually required to render sufficient permeance with high CO 2 /N 2 selectivity. In order to meet such a demand through the knife-coating process, the coating solution needs to have a high viscosity at a relatively low concentration to minimize its penetration into the substrate. The demand was met by synthesizing PVAm with an ultrahigh molecular weight (MW) via inverse emulsion polymerization (IEP) in this study. Compared to solution polymerization, IEP isolates the reaction in inverse micelles suspended in a continuous organic phase, which allows excellent dissipation of the heat generated by the reaction and reduces gel formation drastically. The polymerization parameters, including monomer concentration, initiator concentration, and reaction temperature, were investigated to obtain the optimal MW of PVAm for membrane performance. As compared to solution polymerization, IEP enhanced the MW of PVAm from 1.2 to 12.7 MDa, which minimized the penetration of the coating solution into the substrate and hence the extra mass transfer resistance. The effect of MW and degree of hydrolysis of PVAm on the membrane transport properties were studied. Furthermore, by employing PVAm with a MW of 12.7 MDa to strengthen the polymer matrix, the loading of piperazine glycinate in the membrane was increased up to 85 wt.%. In conclusion, the resultant membrane achieved a CO 2 permeance of 839 GPU and a CO 2 /N 2 selectivity of 161 at the typical flue gas temperature of 57°C.

20 FOSSIL-FUELED POWER PLANTS↗

Facilitated transport membranes for H 2 purification from coal-derived syngas: A techno-economic analysis

A single-stage membrane process has been designed for using facilitated transport membranes (FTMs) to decarbonize the coal-derived syngas from an integrated gasification combined cycle (IGCC) power plant. The necessary process model and costing method have also been developed to assess the technical feasibility and process economics. In order to account for the carrier saturation phenomenon associated with FTMs, a homogeneous reactive diffusion model is integrated into the process model. The techno-economic study reveals that the mitigated carrier saturation upon bulk CO 2 removal can lead to appreciable increases in the CO 2 permeance and CO 2 /H 2 selectivity, which can be utilized to achieve 95% CO 2 purity and 95% H 2 recovery with a CO 2 /H 2 selectivity of 50 at the complete carrier saturation. FTMs with different facilitated transport characteristics can also be arranged in a hybrid membrane configuration to render a H 2 recovery of 99% and a cost of electricity of $\$118.5$ /MWh, which is 12.5% lower than that of the benchmark Selexol process.

42 ENGINEERING↗

CO 2 -selective membranes containing amino acid salts for CO 2 /N 2 separation

In this paper, facilitated transport membranes comprising polyvinylamine (PVAm) as fixed carrier and different amino acid salts (AAS) as mobile carriers were synthesized for post-combustion capture. The AAS carriers were prepared by deprotonating alanine (Ala), lysine (Lys), and proline (Pro) with 2-(1-piperazinyl)ethylamine (PZEA). CO 2 separation performances of the membranes with these AAS carriers were compared, and the AAS effectiveness to facilitate transport of CO 2 was in the order of PZEA-Pro > PZEA-Lys > PZEA-Ala. Here, the membrane comprising 35 wt.% PVAm and 65 wt.% PZEA-Pro at 57 °C rendered a promising CO 2 permeance of 936 GPU and a CO 2 /N 2 mixed gas selectivity of 193. When the PVAm was reduced to 15 wt.%, i.e., its 20 wt.% was replaced by the mobile carrier of PZEA-Sar (sarcosinate), the permeance further improved to 947 GPU with a remarkable CO 2 /N 2 selectivity of 210. Moreover, thermal gravimetric analysis showed a good thermal stability of the membrane, and membrane stability testing also gave stable transport performance. Furthermore, spectroscopic ellipsometry analysis exhibited a uniform membrane selective layer and an excellent agreement on the membrane thickness of ca. 170 nm measured independently by SEM. In addition, the membranes presented in this paper surpassed both the Robeson upper bound and the modified upper bound, indicating a great potential for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗