Search NASA⌕ Search

SEARCH · Search NASA

Results for “separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Strategic Time-Based Metering that Assures Separation for Integrated Operations in a Terminal Airspace

This paper reports an algorithm for strategic time-based metering of air traffic arriving and departing from a large ( tens of nautical miles) area (called here, the commitment region) around an airport or metroplex. The algorithm assures separation continuously in time and avoids a dictation of intent to an aircraft crew. This is accomplished by allowing an aircraft (specifically, its Flight Management System) to specify, and commit to, an intended route and ground speed profile along that route within the commitment region, and by supplying the time at which to enter the region to the aircraft crew. The airspace that comprises the commitment region need not be confined to the terminal airspace and can include some of the enroute space: the size and shape of the commitment region are parameters in the algorithm. An exact formula for including speed profile uncertainty in the algorithm is provided. The algorithm is applied to a number of data sets recorded during actual air traffic operations in the Southern California TRACON in July of 2014 and the Atlanta TRACON in November and December of 2013. The results of the numerical simulations indicate that the algorithm succeeds at keeping the aircraft separated, but introduces, in its current implementation, more separation than that observed in actual operations. This excess separation can be reduced by modeling more accurately the Visual Flight Rules separation practices, a direction for future research.

air traffic management↗

Space Launch System Booster Separation Supersonic Powered Testing with Surface and Off-body Measurements

A wind tunnel test was run in the NASA Langley Unitary Plan Wind Tunnel simulating the separation of the two solid rocket boosters (SRB) from the core stage of the NASA Space LaunchSystem (SLS). The test was run on a 0.9% scale model of the SLS Block 1B Cargo (27005) configuration and the SLS Block 1B Crew (28005) configuration at a Mach of 4.0. The SRBs weremounted separately from the core, and could be pitched, yawed, and translated in the X, Y, andZ directions relative to the core. High pressure air was used to simulate plumes from the booster separation motors located at the nose and aft skirt of the two boosters. Force and moment data were taken on both SRBs and on the core stage. Schlieren still photos and video were recorded throughout testing. A set of points were acquired using Cross-correlation Doppler Global Velocimetry (CCDGV) readings to get 3 component velocity measurements between the core and the left-hand SRB. The CCDGV laser was utilized to record flow visualization in the same location, between the core and the left-hand SRB. Pressure Sensitive Paint (PSP) data were taken on a separate set of runs. Computational Fluid Dynamics (CFD) runs were computed on a subset of the wind tunnel data points for comparison. A combinationof the force and moment, CCDGV, and PSP data (as well as schlieren images) at the CFD-specified test conditions will be used to validate the CFD simulations that will be used to build an SLS booster separation database at flight conditions.

SLS↗

Informing the Space Launch System Booster Separation Initial CFD Run Matrix with Observed Parametric Sensitivity

It currently requires significant computational cost to simulate the flow physics of the booster separation event on the Space Launch System. This comes from the large parametric space in which the event occurs, as pre-separation flight conditions and separated booster core-relative trajectories can vary. Functionally removing the risk of core-booster collision mandates careful assessment of the fluid dynamics in terms of several trajectory parameters. However, simulating the entire trajectory envelope is computationally intractable given the high parametric dimension. In order to reduce the uncertainty in the resulting low-parametric-resolution aerodynamic booster separation database, a data-driven approach was developed to select which breakpoints should be studied by simulations and experiments and which should be relegated to a regression-based interpolation procedure. This technique works by simulating cases where the flow physics are most sensitive to changes in the parameters and leaving the less parametrically sensitive regions for interpolation. The result is a booster separation run matrix whose computational cost is comparable to that of previous database generations but has lower interpolation errors.

SLS↗

Informing the Space Launch System Booster Separation Initial CFD Run Matrix with Observed Parametric Sensitivity

It currently requires significant computational cost to simulate the flow physics of the booster separation event on the Space Launch System. This comes from the large parametric space in which the event occurs, as pre-separation flight conditions and separated booster core-relative trajectories can vary. Functionally removing the risk of core-booster collision mandates careful assessment of the fluid dynamics in terms of several trajectory parameters. However, simulating the entire trajectory envelope is computationally intractable given the high parametric dimension. In order to reduce the uncertainty in the resulting low-parametric-resolution aerodynamic booster separation database, a data-driven approach was developed to select which breakpoints should be studied by simulations and experiments and which should be relegated to a regression-based interpolation procedure. This technique works by simulating cases where the flow physics are most sensitive to changes in the parameters and leaving the less parametrically sensitive regions for interpolation. The result is a booster separation run matrix whose computational cost is comparable to that of previous database generations but has lower interpolation errors.

SLS↗

Separation Assurance in Urban Air Mobility Systems Using Shared Scheduling Protocols

Ensuring safe separation between aircraft is a critical challenge in air traffic management, particularly in urban air mobility (UAM) environments where high traffic density and low altitudes require precise control. In these environments, conflicts often arise at the intersections of flight corridors, posing significant risks. We propose a tactical separation approach leveraging shared scheduling protocols, originally designed for Ethernet networks and operating systems, to coordinate access to these intersections. Using a decentralized Markov decision process framework, the proposed approach enables aircraft to autonomously adjust their speed and timing as they navigate these critical areas, maintaining safe separation without a central controller. We evaluate the effectiveness of this approach in simulated UAM scenarios, demonstrating its ability to reduce separation violations to zero while acknowledging trade-offs in flight times as traffic density increases. Additionally, we explore the impact of non-compliant aircraft, showing that while shared scheduling protocols can no longer guarantee safe separation, they still provide significant improvements over systems without scheduling protocols.

Separation Assurance↗

Separation Assurance in Urban Air Mobility Systems Using Shared Scheduling Protocols

Ensuring safe separation between aircraft is a critical challenge in air traffic management, particularly in urban air mobility (UAM) environments where high traffic density and low altitudes require precise control. In these environments, conflicts often arise at the intersections of flight corridors, posing significant risks. We propose a tactical separation approach leveraging shared scheduling protocols, originally designed for Ethernet networks and operating systems, to coordinate access to these intersections. Using a decentralized Markov decision process framework, the proposed approach enables aircraft to autonomously adjust their speed and timing as they navigate these critical areas, maintaining safe separation without a central controller. We evaluate the effectiveness of this approach in simulated UAM scenarios, demonstrating its ability to reduce separation violations to zero while acknowledging trade-offs in flight times as traffic density increases. Additionally, we explore the impact of non-compliant aircraft, showing that while shared scheduling protocols can no longer guarantee safe separation, they still provide significant improvements over systems without scheduling protocols.

system safety↗

Techno-Economic Analysis and Life-Cycle Assessment of Emerging Technologies for Bioprocessing Separations

Limited availability, rising costs, and environmental concerns about fossil fuels have generated considerable interest in finding alternative, renewable sources including biomass, which can be converted into a number of biofuels and bioproducts. In comparison to petroleum-based products, high processing costs, mainly associated with bioprocessing separations, limit widespread implementation of biofuels and bioproducts. Bioprocess-related separations are also complicated, regardless of the conversion pathway, due to the dilute nature of products and the chemically complex mixtures that result from biomass deconstruction. In many cases, bioprocessing separation approaches lack a technology baseline, or definition of the state of technology (SOT). This work focuses on evaluating the technology readiness of novel separations technologies for the conversion of biomass into biofuels and bioproducts and will address three key topics: 1) SOT description, 2) economic viability analysis of both SOT and innovative separations, and 3) environmental impact assessment of both SOT and novel processes. The current SOT for lignin valorization, dilute carbon recovery, and impurity removal is used to identify potential opportunities for improvement and provide a baseline for comparison with the emerging technologies. Detailed techno-economic analysis (TEA) and life cycle assessment (LCA) are applied to understand the key drivers and challenges related to the economic feasibility and environmental impacts, respectively.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗

Electrochemically-Modulated Separation and Mass Spectrometric Analysis of Actinides in Difficult Matrices

Electrochemically-modulated separations (EMS) are a straightforward means of isolating and pre-concentrating elements for on-line mass spectrometric analysis. Elements are accumulated at electrochemical working electrodes and subsequently released into a clean carrier solution for spectroscopic analysis. EMS can employ solely aqueous chemistry and uses electrochemical redox adjustment of oxidation state to “trigger” reversible chelation / complexation. Less tractable elements (e.g., uranium and plutonium), based on redox potentials, can therefore be extracted from difficult matrices following redox adjustment and chelation with electrode chelation sites. Simply put, separation is achieved by a small voltage step that is applied to the target electrode to turn “on” or “off” the specific actinide affinity of an electrode. This separation technology employs both redox and chelation chemistry to effect highly selective accumulation of target actinides, and results in element separation, matrix elimination and analyte preconcentration. Prior studies have developed protocols and preliminary insight into EMS processes for U and Pu. U and Pu are released upon oxidation and reduction, respectively, allowing complete separation due to widely divergent redox potentials. T The coupling of EMS on-line with ICP-MS for elemental and isotopic analysis of uranium and plutonium is presented, with a focus on analytical performance metrics and applicability to safeguards and process monitoring via nondestructive analyses.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Pilot-Scale TRUEX Flowsheet Testing for Separation of Actinides and Lanthanides from Used Nuclear Fuel

Advanced aqueous separation processes are being developed for the recycling of used nuclear fuel as part of the U.S. Department of Energy Nuclear Energy Advanced Fuel Cycle Initiative. The Transuranic Extraction (TRUEX) Process is being developed as part of these advanced separations processes for the separation of actinides and lanthanides from the used nuclear fuel. Testing of a TRUEX flowsheet has been performed using a thirty stage, 5-cm centrifugal contactor pilot plant. This testing was performed using a non-radioactive feed surrogate and data were collected and analyzed to evaluate removal efficiencies of the lanthanides, mass transfer efficiency of the lanthanides in the extraction and strip sections of the flowsheet, and the temperature profile of the process solutions throughout the centrifugal contactor pilot plant. Results indicate >99.9% separation for all lanthanides and mass transfer efficiencies typically ranging from 85% to 100%. Solution temperatures for each contactor stage, as well as general process performance, are also described.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Low‐Cost Self‐Assembled Oxide Separator for Rechargeable Batteries

Abstract Rechargeable battery cells having a liquid electrolyte require a separator permeable to the electrolyte between the two electrodes. Because the electrodes change their volume during charge and discharge, the porous separators are flexible polymers with an electronic energy gap E g large enough for the Fermi levels of the two electrodes to be within it. In this work, a porous film of self‐assembled SiO 2 nanoparticles is developed as the separator for a Li‐ion battery with a liquid electrolyte. This coating does not require the plasticity of a polymer membrane and has the required large E g . If adsorbed water is removed from the SiO 2 surface, the nanoparticles bond to one another and to an oxide cathode to form a plastic self‐assembling porous layer into which the liquid electrolyte can penetrate. The Li‐ion batteries with a LiCoO 2 cathode coated with SiO 2 as a separator show similar performance to cells with a traditional polypropylene separator and improved cyclability with a reduced volume of liquid electrolyte owing to the electrolyte wetting properties of the SiO 2 nanoparticles. The SiO 2 nanoparticles are easy to prepare, cheap, and environmentally friendly.

Grundish, Nicholas S.↗

Mathematical modeling and parameter estimation of MFI membranes for para/ortho‐xylene separation

Abstract A mathematical model of a membrane with a thin, oriented, and selective MFI layer, which also includes contributions from defects, pore blockages, support layer, and external mass transfer, was formulated based on the Maxwell‐Stefan equations. It was validated using reported (Kim et al., Angew Chemie Int Ed, 2018, 57:480–485; Jeon et al., Nature, 2017, 543:690–694) para/ortho‐xylene separation data from five MFI membranes. The diffusivities of the xylenes were considered to be the same for all membranes, while the thickness and the density of defects and pore blockage were treated as unique properties of each membrane, and their contributions were estimated by fitting the model to the corresponding separation data. The effects of these properties and the role of permeate pressure on the separation performance were subsequently analyzed. The proposed modeling, parameter estimation, and analysis framework allow one to quantitatively interpret the variation of separation performance, to understand separation bottlenecks, and to provide guidance for designing membranes with desired performance.

Liu, Jingjun↗

Electro‐kinetic Separation of Rare Earth Elements Using a Redox‐Active Ligand

Abstract Purification of rare earth elements is challenging due to their chemical similarities. All of the deployed separation methods rely on thermodynamic properties, such as distribution equilibria in solvent extraction. Rare‐earth‐metal separations based on kinetic differences have not been examined. Herein, we demonstrate a new approach for rare‐earth‐element separations by exploiting differences in the oxidation rates within a series of rare earth compounds containing the redox‐active ligand [{2‐( t BuN(O))C 6 H 4 CH 2 } 3 N] 3− . Using this method, a single‐step separation factor up to 261 was obtained for the separation of a 50:50 yttrium–lutetium mixture.

Fang, Huayi↗

Magnetic Field Directed Rare‐Earth Separations

Abstract The separation of rare‐earth ions from one another is challenging due to their chemical and physical similarities. Nearly all rare‐earth separations rely upon small changes in ionic radii to direct speciation or reactivity. Herein, we show that the intrinsic magnetic properties of the rare‐earth ions impact the separations of light/heavy and selected heavy/heavy binary mixtures. Using TriNOx 3− ([{(2‐ t BuNO)C 6 H 4 CH 2 } 3 N] 3− ) rare‐earth complexes, we efficiently and selectively crystallized heavy rare earths (Tb–Yb) from a mixture with light rare earths (La and Nd) in the presence of an external Fe 14 Nd 2 B magnet, concomitant with the introduction of a concentration gradient (decrease in temperature). The optimal separation was observed for an equimolar mixture of La:Dy, which gave an enrichment factor of EF La:Dy =297±31 for the solid fraction, compared to EF La:Dy =159±22 in the absence of the field, and achieving a 99.7 % pure Dy sample in one step. These results indicate that the application of a magnetic field can improve performance in a molecular separation system for paramagnetic rare‐earth cations.

Higgins, Robert F.↗

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Abstract Metal–organic frameworks (MOFs) have been proposed as a promising material for non‐thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc‐based MOF containing a three‐dimensional (3D) linker, bicyclo[2.2.2]octane‐1,4‐dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well‐defined pore apertures/channels with sub‐Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi‐component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn‐based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

Lal, Bhajan↗

Molecularly engineering polymeric membranes for H 2 / CO 2 separation at 100–300 °C

Over the last two decades, polymers with superior H 2 /CO 2 separation properties at 100–300 °C have gathered significant interest for H 2 purification and CO 2 capture. This timely review presents various strategies adopted to molecularly engineer polymers for this application. We first elucidate the Robeson's upper bound at elevated temperatures for H 2 /CO 2 separation and the advantages of high-temperature operation (such as improved solubility selectivity and absence of CO 2 plasticization), compared with conventional membrane gas separations at ~35 °C. Second, we describe commercially relevant membranes for the separation and highlight materials with free volumes tuned to discriminate H 2 and CO 2 , including functional polymers (such as polybenzimidazole) and engineered polymers by cross-linking, blending, thermal treatment, thermal rearrangement, and carbonization. Third, we succinctly discuss mixed matrix materials containing size-sieving or H 2 -sorptive nanofillers with attractive H 2 /CO 2 separation properties.

42 ENGINEERING↗

Sequential Separation of Linear, Mono–, and Di–Branched Hexane Isomers on a Robust Coordination Polymer with Nonbonding Flexibility

Efficient separation of hexane isomers is a crucial process for upgrading gasoline. Herein, the sequential separation of linear, mono-, and di-branched hexane isomers by a robust stacked 1D coordination polymer termed as Mn-dhbq ([Mn(dhbq)(H 2 O) 2 ], H 2 dhbq = 2,5-dihydroxy-1,4-benzoquinone) is reported. The interchain space of the activated polymer is of optimal aperture size (5.58 Å) that could exclude 2,3-dimethylbutane, while the chain structure can discriminate n-hexane with high capacity (1.53 mmol g –1 at 393 K, 6.67 kPa) by high-density open metal sites (5.18 mmol g –1 ). With the temperature- and adsorbate-dependent swelling of interchain spaces, the affinity between 3-methylpentane and Mn-dhbq can be deliberately controlled from sorption to exclusion, and thus a complete separation of ternary mixture can be achieved. Column breakthrough experiments confirm the excellent separation performance of Mn-dhbq. Furthermore, the ultrahigh stability and easy scalability further highlight the application prospect of Mn-dhbq for separation of hexane isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using HPTLC/DESI-MS for Peptide Identification in 1D Separations of Tryptic Protein Digests

Desorption electrospray ionization mass spectrometry was investigated as a method to detect and identify peptides from tryptic digests of cytochrome c and myoglobin separated on ProteoChrom HPTLC Silica gel 60 F254s plates and ProteoChrom HPTLC Cellulose sheets. Both full scan mass spectra and data-dependent tandem mass spectra were acquired in separate plate scans and used to identify peptide ions. Peptide distributions along the development lane were mapped for each separated protein digest. Signal levels ranged over several orders of magnitude. In general, highest signal levels were obtained for the peptides with the highest Rf values on a plate, while peptides with very low Rf values were often not detected. Sequence coverages for cytochrome c were 58% for the digest separated on the silica gel plate and 72% for the separation on the cellulose sheet; myoglobin sequence coverages were 62% and 68% on silica gel and cellulose, respectively. Weak correlations between peptide hydrophilicity and Rf values on the silica gel and cellulose plates were found, with more hydrophilic peptides having lower Rf values.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrodissection of the Retrohepatic Space: A Technique to Physically Separate a Liver Tumour from the Inferior Vena Cava and the Ostia of the Hepatic Veins

Objective: To report a technique of percutaneous retrohepatic hydrodissection, highlighting its potential to physically separate liver tumours from the inferior vena cava (IVC) and the ostia of the hepatic veins (HV). Materials and Methods: Between December 2017 and April 2018, hydrodissection of the retrohepatic IVC was performed in 5 patients (5 females; mean age 64.5 years) undergoing percutaneous ablation of 5 liver metastases (mean size: 3.6 cm) located adjacent to the IVC. Number of hydrodissection needles, volume of hydrodissection, separation of tumour/liver parenchyma from IVC/HV post-hydrodissection; technical success of ablation; and complications were tabulated. Results: Two to three 22G spinal needles were required per case for adequate dissection. Mean volume to obtain sufficient hydrodissection was 410 ml on average. Physical separation of the IVC and tumour/hepatic parenchyma was successful in all cases, by 9 mm on average (range 5–12 mm). It also leaded to physical separation of the ostia of the right and middle HV in all cases. There was no early or delayed complication, notably no venous thrombosis in the post-operative period. All lesions but one were completely ablated after one session at 3-month follow-up. The patient with residual tumour was successfully retreated. Conclusion: Retrohepatic hydrodissection is a feasible technique to separate a tumour from the IVC and/or ostia of the HV. This could potentially limit the heat-sink effect/reduce the risk of thrombosis. Larger follow-up studies are required to assess efficacy on a long-term basis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗