Search NASA⌕ Search

SEARCH · Search NASA

Results for “speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Defects in High Speed Growth of EFG Silicon Ribbon

Silicon ribbons grown by the Edge-defined Film-fed Growth (EFG) technique exhibit a characteristic defect structure typified by twins, dislocations, grain boundaries and silicon carbide inclusions. As growth speed is increased from less than 2.5 cm per minute, the structural details change. The major difference between the ribbons grown at speeds below and above 2.5 cm per minute is in the generation of a cellular structure at the higher growth speeds, observable in the ribbon cross section. The presence of the cross sectional structure leads, in general, to a reduction in cell performance. Models to explain the formation of such a cross sectional structure are presented and discussed.

Rao, C. V. H. N.↗
NASA NTRS1984

Speed of sound and temperature in the ocean by Brillouin scattering

A method is described to measure the speed of sound and the temperature in the sea as functions of depth. Backscattered laser light is analyzed with an interferometric spectrometer. The speed of sound at very short acoustic wavelengths is obtained directly from the wavelength shift of the Brillouin scattered light, and the temperature is deduced from the speed of sound together with auxiliary information on depth and salinity. Experiments are described.

Hirschberg, J. G.↗
NASA NTRS1984

The effects of the variations in sea surface temperature and atmospheric stability in the estimation of average wind speed by SEASAT-SASS

The average wind speeds from the scatterometer (SASS) on the ocean observing satellite SEASAT are found to be generally higher than the average wind speeds from ship reports. In this study, two factors, sea surface temperature and atmospheric stability, are identified which affect microwave scatter and, therefore, wave development. The problem of relating satellite observations to a fictitious quantity, such as the neutral wind, that has to be derived from in situ observations with models is examined. The study also demonstrates the dependence of SASS winds on sea surface temperature at low wind speeds, possibly due to temperature-dependent factors, such as water viscosity, which affect wave development.

Liu, W. T.↗
NASA NTRS1983

Speed benefits of tilt-rotor designs for LHX

The merits of an advanced helicopter and a tilt rotor aircraft for light utility, scout, and attack roles in combat missions envisioned for the year 2000 and beyond were compared. It is demonstrated that speed has increasing value for 11 different mission classes broadly encompassing the intended LHX roles. Helicopter speeds beyond 250 knots are judged to have lower military worth. Since the tilt rotor concept offers a different cost speed relationship than that of helicopters, assessment of a tilt rotor LHX variant was warranted. The technical parameters of an advanced tilt rotor are stablished. Parameters of representative missions are identified, computed relative value of the tilt rotor LHX are compared to the baseline helicopter, a first-order life cycle estimate for the tilt rotor LHX is established, military worth of the alternative design is computed and the results are evaluated. It is suggested that the tilt rotor is the solution with the greatest capability for meeting the uncertainties of future needs.

Mcdaniel, R. L.↗
NASA NTRS1984

Large amplitude forcing of a high speed 2-dimensional jet

The effect of large amplitude forcing on the growth of a high speed two dimensional jet was investigated experimentally. Two forcing techniques were utilized: mass flow oscillations and a mechanical system. The mass flow oscillation tests were conducted at Strouhal numbers from 0.00052 to 0.045, and peak to peak amplitudes up to 50 percent of the mean exit velocity. The exit Mach number was varied in the range 0.15 to 0.8. The corresponding Reynolds numbers were 8,400 and 45,000. The results indicate no significant change of the jet growth rate or centerline velocity decay compared to the undisturbed free jet. The mechanical forcing system consists of two counter rotating hexagonal cylinders located parallel to the span of the nozzle. Forcing frequencies up to 1,500 Hz were tested. Both symmetric and antisymmetric forcing can be implemented. The results for antisymmetric forcing showed a significant (75 percent) increase of the jet growth rate at an exit Mach number of 0.25 and a Strouhal number of 0.019. At higher rotational speeds, the jet deflected laterally. A deflection angle of 39 deg with respect to the centerline was measured at the maximum rotational speed.

Bernal, L.↗
NASA NTRS1985

Effect of speed and press fit on fatigue life of roller-bearing inner-race contact

An analysis was performed to determine the effects of inner ring speed and press fit on the rolling element fatigue life of a roller bearing inner race contact. The effects of the resultant hoop and radial stresses on the principal stresses were considered. The maximum shear stresses below the Hertzian contact were determined for different conditions of inner ring speed, load, and geometry and were applied to a conventional ring life analysis. The race contact fatigue life was reduced by more than 90 percent for some conditions when speed and press fit were considered. The depth of the maximum shear stress remained virtually unchanged.

Coe, H. H.↗
NASA NTRS1983

General approaches for achieving high speed computations

The basic organizational approach to achieve high speed computations has been to execute several instructions concurrently. Various algorithmic structures and related computer organizations have been identified and used for this purpose. Each of them is better suited for some classes of applications, provides a potential speed-up with respect to the sequential computer, and suffers from degradation factors that reduce the effective speed-up obtained. The basic algorithmic structures are presented, the corresponding computer organizations described and the potential degradation factors identified. Also included are considerations related to the cost of the system and to the corresponding programming methodology.

Lang, T.↗
NASA NTRS1983

Dual measurement terminal fall speeds and multiple Doppler winds

It is shown that radar-derived terminal fall speed measurements can be useful in determining vertical air velocity in the middle troposphere by means of a network of Doppler radars. The theoretical principles of the dual measurement technique are described, and the relationship between measurement accuracies and theoretical estimates of terminal fall speeds is discussed. It is demonstrated that the use of differential reflectivity to estimate terminal fall speeds can reduce the standard error of vertical velocity estimates by 40-50 percent.

Grosh, R. C.↗
NASA NTRS1984

Test structures for propagation delay measurements on high-speed integrated circuits

The accuracy of high-speed wafer-level measurements on digital IC's is limited by the probe interface. This limitation strongly encourages the use of built-in on-chip test hardware to reduce the number of critical off-chip high-speed interfaces. A novel synchronous propagation delay test structure is described which will provide accurate parametric data under typical automatic test conditions. Built-in test features added to complex combinational circuits are shown which are useful for delay measurement and which reduce the total number of high-speed I/O connections while still providing acceptable fault coverage in many cases.

Long, S. I.↗
NASA NTRS1985

Comparison of calculated and measured velocities near the tip of a model rotor blade at transonic speeds

The ability of the ROT22 code to predict accurately the transonic flow field in the crucial region around and beyond the tip of a high speed rotor blade was assessed. The computations were compared with extensive laser velocimetry measurements made at zero advance ratio and tip Mach numbers of 0.85, 0.88, 0.90, and 0.95. The comparison between theory and experiment was made using 300 scans for the three orthogonal velocity components covering a volume having a height of over one blade chord, a width of nearly two chords, and a length ranging from about 1 to 1.6 chords, depending on the tip speeds. The good agreement between the calculated and measured velocities established the ability of the code to predict the off blade flow field at high tip speeds. This supplements previous comparisons where surface pressures were shown to be well predicted on two different tips at advance ratios to 0.45, especially at the critical 90 deg azimuth blade position. These results demonstrate that the ROT22 code can be used with confidence to predict the important tip region flow field including the occurrence, strength, and location of shock waves causing high drag and noise.

Tauber, M. E.↗
NASA NTRS1986

Supercomputer implementation of finite element algorithms for high speed compressible flows

Prediction of compressible flow phenomena using the finite element method is of recent origin and considerable interest. Two shock capturing finite element formulations for high speed compressible flows are described. A Taylor-Galerkin formulation uses a Taylor series expansion in time coupled with a Galerkin weighted residual statement. The Taylor-Galerkin algorithms use explicit artificial dissipation, and the performance of three dissipation models are compared. A Petrov-Galerkin algorithm has as its basis the concepts of streamline upwinding. Vectorization strategies are developed to implement the finite element formulations on the NASA Langley VPS-32. The vectorization scheme results in finite element programs that use vectors of length of the order of the number of nodes or elements. The use of the vectorization procedure speeds up processing rates by over two orders of magnitude. The Taylor-Galerkin and Petrov-Galerkin algorithms are evaluated for 2D inviscid flows on criteria such as solution accuracy, shock resolution, computational speed and storage requirements. The convergence rates for both algorithms are enhanced by local time-stepping schemes. Extension of the vectorization procedure for predicting 2D viscous and 3D inviscid flows are demonstrated. Conclusions are drawn regarding the applicability of the finite element procedures for realistic problems that require hundreds of thousands of nodes.

Thornton, E. A.↗
NASA NTRS1987

Design Considerations for High-Speed Control Systems

Existing hardware integrated into versatile, high-speed control system. Report discusses five global design considerations to integrate array-processor, multimicroprocessor, and host-computer system architectures into versatile, high-speed controllers. Such controllers are capable of control throughputs as high as 36 MHz for 8-bit bytes and maintain constant interaction with non-real-time or user environment. Application example, architecture of high-speed, closed-loop controller used to control helicopter vibration actively discussed.

Jacklin, S. A.↗
NASA NTRS1986

Laser sounding of instantaneous and mean speed of wind using correlation method

The correlation methods for laser sounding of wind speed are based on mutual processing of lidar signals scattered from several spatially separated volumes at each altitude investigated. The time of atmospheric aerosol transport between the scattering volumes estimated by the position of maximum of the mutual correlation function is the measure of corresponding wind speed. In this case the distance between the scattering volumes (the measuring base), defining the time of aerosol movement through the measuring base also determines the lidar possibilities for measuring the instantaneous (during the time interval of several seconds) or the mean wind speed (some minutes). Based on the experimental investigations performed using two lidars, these possibilites are analyzed.

Zuev, V. E.↗
NASA NTRS1987

Unique research challenges for high-speed civil transports

Market growth and technological advances are expected to lead to a generation of long-range transports that cruise at supersonic or even hypersonic speeds. Current NASA/industry studies will define the market windows in terms of time frame, Mach number, and technology requirements for these aircraft. Initial results indicate that, for the years 2000 to 2020, economically attractive vehicles could have a cruise speed up to Mach 6. The resulting research challenges are unique. They must be met with technologies that will produce commercially successful and environmentally compatible vehicles where none have existed. Several important areas of research were identified for the high-speed civil transports. Among these are sonic boom, takeoff noise, thermal management, lightweight structures with long life, unique propulsion concepts, unconventional fuels, and supersonic laminar flow.

Jackson, Charlie M., Jr.↗
NASA NTRS1985

High speed photography, videography, and photonics III; Proceedings of the Meeting, San Diego, CA, August 22, 23, 1985

Papers are presented on the picosecond electronic framing camera, photogrammetric techniques using high-speed cineradiography, picosecond semiconductor lasers for characterizing high-speed image shutters, the measurement of dynamic strain by high-speed moire photography, the fast framing camera with independent frame adjustments, design considerations for a data recording system, and nanosecond optical shutters. Consideration is given to boundary-layer transition detectors, holographic imaging, laser holographic interferometry in wind tunnels, heterodyne holographic interferometry, a multispectral video imaging and analysis system, a gated intensified camera, a charge-injection-device profile camera, a gated silicon-intensified-target streak tube and nanosecond-gated photoemissive shutter tubes. Topics discussed include high time-space resolved photography of lasers, time-resolved X-ray spectrographic instrumentation for laser studies, a time-resolving X-ray spectrometer, a femtosecond streak camera, streak tubes and cameras, and a short pulse X-ray diagnostic development facility.

Ponseggi, B. G.↗
NASA NTRS1986

The evolution of methods for noise prediction of high speed rotors and propellers in the time domain

Linear wave equation models which have been used over the years at NASA Langley for describing noise emissions from high speed rotating blades are summarized. The noise sources are assumed to lie on a moving surface, and analysis of the situation has been based on the Ffowcs Williams-Hawkings (FW-H) equation. Although the equation accounts for two surface and one volume source, the NASA analyses have considered only the surface terms. Several variations on the FW-H model are delineated for various types of applications, noting the computational benefits of removing the frequency dependence of the calculations. Formulations are also provided for compact and noncompact sources, and features of Long's subsonic integral equation and Farassat's high speed integral equation are discussed. The selection of subsonic or high speed models is dependent on the Mach number of the blade surface where the source is located.

Farassat, F.↗
NASA NTRS1986

Solar wind speed azimuthal variation along the heliospheric current sheet

Analysis of the speeds measured by Voyager 1 and 2 while skimming along a horizontal (east-west) portion of the current sheet over several days in 1977 is reported. The results demonstrate that in this case speed variations exist and would be large enough to significantly deform the sheet within a few AU or less if the current sheet were anything but perfectly horizontal. The spatial scale of the speed variation ranges from the smallest measureable scale using one hour averaged data up to tens of degrees in longitude. A deformation example is given under the assumption that the observed velocity variation exists on a current sheet that is initially perpendicular to the heliographic equator.

Suess, S. T.↗
NASA NTRS1987

The speeds of electrons that excite solar radio bursts of type III

Evidence is presented that solar type III radio bursts at kilometric wavelengths are excited by electrons with average speeds of 0.14 c; i.e., in good agreement with in situ measurements by Lin et al. (1981; 1986), but considerably lower than the generally accepted values of 0.3 to 0.5 c. A set of 28 bursts for which electrons and/or plasma waves were observed at ISEE-3 is examined, and it is found that the initial parts of all bursts were due to plasma radiation at the fundamental, and that the fastest electrons that produce radio emission range from 0.25 c down to 0.07 c (average 0.14 c). The slower electrons, those that produce fundamental radiation at approximately the time of burst peak, have an average speed of 0.06 c and a range from about 0.10 c down to 0.03 c.There is no evidence in the data for a systematic increase or decrease of exciting electron speed with distance from the sun.

Dulk, G. A.↗