Search NASA⌕ Search

SEARCH · Search NASA

Results for “structure changes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Development of modified vibration test criteria for qualifying space vehicle components

Simplified methods are described to estimate the test criteria of primary structures at component attachment points subjected to broadband random acoustic excitations. The current method utilizes a constant smeared component mass attenuation factor across the frequency range of interest. The developed method indicates that the attenuation factor is based on a frequency dependent ratio of the mechanical impedances of both the component and primary structures. The procedures used to predict the structural responses are considered as the present state-of-the-art and provide satisfactory prediction results. Example problems are used to illustrate the application procedures of the two methods and to compare the significant difference. It was found that the lower test criteria obtained by the impedance ratio method is due to the results of considering the effects of component/primary structure interaction.

Chang, K. Y.↗

The outer solar corona as observed from Skylab - Preliminary results

The white-light coronagraph experiment has made frequent, periodic observations of the solar corona from 1.5 to 6.0 solar radii during the Skylab mission, and these observations will permit the determination of the three-dimensional extent of coronal forms. There are several time scales on which visual changes in coronal structures occur, ranging from approximately one-half rotation to less than hours. A number of events corresponding to the shortest time scale - coronal transients - cause major restructuring of the corona.

Macqueen, R. M.↗

Design and fabrication of a flexible tunnel for Sortie Laboratory

A program was conducted to update a prototype design and to fabricate a flexible tunnel for a space shuttle/spacelab interface structure. The significant changes in the prototype are as follows: (1) elimination of foam from bladder laminate to increase bladder flexibility, (2) heat treat pulley brackets, bolts, and hinge pin to 160,000 psi minimum tensile strength, and (3) reduction of the meteoroid barrier from 0.5 inch to 0.375 inch. The thermal blanket installation study resulted in developing a method of installation by properly folding the various layers so that a uniform thickness could be maintained under the clamps. A single-lobe mockup was fabricated and cycled open and closed several times with no apparent damage to the blanket.

Source record↗

Direct observation of small cluster mobility and ripening

Direct evidence is reported for the simultaneous occurrence of Ostwald ripening and short-distance cluster mobility during annealing of discontinuous metal films on clean amorphous substrates. The annealing characteristics of very thin particulate deposits of silver on amorphized clean surfaces of single crystalline thin graphite substrates were studied by in-situ transmission electron microscopy (TEM) under controlled environmental conditions (residual gas pressure of 10 to the minus 9th power torr) in the temperature range from 25 to 450 C. Sputter cleaning of the substrate surface, metal deposition, and annealing were monitored by TEM observation. Pseudostereographic presentation of micrographs in different annealing stages, the observation of the annealing behavior at cast shadow edges, and measurements with an electronic image analyzing system were employed to aid the visual perception and the analysis of changes in deposit structure recorded during annealing. Slow Ostwald ripening was found to occur in the entire temperature range, but the overriding surface transport mechanism was short-distance cluster mobility.

Heinemann, K.↗

Evidence for magnetic field line reconnection in the solar wind

The basic scheme of Petschek's (1963) models for slow and fast magnetic reconnection in the solar wind is reviewed in order to determine what sort of results one would expect from satellite observations of possible reconnection processes. Data from HEOS 1 and OGO 5 are then analyzed, in which four observations of neutral sheet structures with large change of magnetic field direction were made. All four may be interpreted as indicating magnetic line reconnections rather than as D-sheets because they all show two distinct discontinuities which bound a lower magnetic field intensity region. The geometry of the magnetic field in the reconnection region appears to be similar to that described by Petschek. In one case the reconnection rate is in agreement with Petschek's prediction, but in the other three cases it is much larger than his limit. The reconnection rates observed do, however, agree with Sonnerup's (1972) limit.

Formisano, V.↗

Thermal desorption of metals from tungsten single crystal surfaces

After a short review of experimental methods used to determine desorption energies and frequencies the assumptions underlying the theoretical analysis of experimental data are discussed. Recent experimental results on the flash desorption of Cu, Ag, and Au from clean, well characterized W (110) and (100) surfaces are presented and analyzed in detail with respect to the coverage dependence. The results obtained clearly reveal the limitations of previous analytical methods and of the experimental technique per se (such as structure and phase changes below and in the temperature region in which desorption occurs).

Bauer, E.↗

Conference on In Situ Composites, 2nd, Bolton Landing, N.Y., September 2-5, 1975, Proceedings

The present collection of papers deals with advances in several areas of interest in in-situ composites. Major areas discussed include solidification and structural control, physical properties, mechanical behavior, stability, environmental response, and development of new metallic and ceramic systems. New evidence about directional solidification in terms of temperature gradients is presented along with solidification rates for successful formation of in-situ composite structures. Much is learned about the factors that control structure in directionally solidified eutectic alloys and the relationship of properties to structure, especially the change in properties as a function of operating environment. Less progress is achieved in the area of physical properties than in the area of mechanical properties. Individual items are announced in this issue.

Jackson, M. R.↗

Three-dimensional reconstruction and display of the heart, lungs and circulation by multiplanar X-ray scanning videodensitometry

A device was developed which makes possible the dynamic reconstruction of the heart and lungs within the intact thorax of a living dog or human and which can record approximately 30 multiplanar X-ray images of the thorax practically instantaneously, and at frequent enough intervals of time and with sufficient density and spatial resolution to capture and resolve the most rapid changes in cardiac structural detail throughout each cardiac cycle. It can be installed in a clinical diagnostic setting as well as in a research environment and its construction and application for determination and display in real-time modes of cross sections of the functioning thorax and its contents of living animals and man is technologically feasible.

Robb, R. A.↗

Ionosonde observations of the northern magnetospheric cleft during December 1974 and January 1975

During December 1974 and January 1975, the northern magnetospheric cleft was monitored by ionosondes at Cape Parry and Sachs Harbor, Northwest Territories, Canada, in support of rocket shots into the cleft. Ionograms were taken nominally at 15-min intervals but as rapidly as two per minute during times of particular interest. Analysis of 5 days of data shows the ionosphere at cleft latitudes to be very complex and dynamic. The ionograms often show considerable structure and can change appearance significantly in a minute or two. The cleft at times appears to move equatorward in response either to a southward turning of the interplanetary magnetic field or to the occurrence of geomagnetic disturbances. This response is in agreement with the conclusions of previous satellite studies. Behavior contrary to this generalization is not uncommon, however, and therefore it may not always hold on time scales considerably shorter than the satellite orbital period of at least 1 hour. The rate of the cleft's motion may vary from about 0.05 to 0.5 deg/min.

Stiles, G. S.↗

Paleoatmospheric temperature structure

Radiative equilibrium and radiative convective temperature profiles for the earth's evolving atmosphere have been calculated. If the atmosphere evolved from one rich in carbon dioxide, and deficient in oxygen, to its present composition, the temperature structure showed considerable change. The models of 3 to 4 billion years ago display steadily decreasing temperatures with altitude, being 185 K at pressures associated with the present-day upper stratosphere. A lapse rate feature similar to the present-day tropopause is not indicated until about 1 billion years ago; but the stratospheric region is approximately 15 K colder than presently found at comparable pressures. Surface temperatures approximately 10 K warmer than at present existed until nearly 1 billion years ago. When the oxygen content exceeded roughly 0.1 times the present level, surface temperatures began to decrease. If biological processes are important to carbon dioxide - ozone variations, such as has been suggested during the Ice Ages, then estimates of surface temperature should include the effects of both gases.

Morss, D. A.↗

The Ca II V/R ratio and mass loss

High-dispersion coude spectrograms of 181 MK standards of types early F through late M, including luminosity classes Ia, Ib, II, and III, are analyzed. It is shown that the brightness ratio of the V and R self-reversed emission peaks (denoted V/R) in the center of the Ca II K line is correlated with spectral type as well as with certain other spectral-type and luminosity-sensitive parameters, including indicators of mass loss and the H-K wing emission lines. The observations indicate that V/R varies smoothly from less than unity in late K and M giants to greater than unity for G giants. This trend appears to be true for bright giants as well but not necessarily for supergiants and seems to hold for the average V/R for a given star, although short-term variations in V/R occur. It is suggested that the V/R values, which can be interpreted in terms of atmospheric motions, may indirectly relate to effects of evolutionary changes in stellar structure and that V/R among late-type stars could be useful as an indicator of both chromospheric activity and the state of stellar evolution.

Stencel, R. E.↗

Center to limb scans of the Saturnian equator at 20 microns

Spatially resolved area scans of the equator of Saturn through filters at 17.8, 19.7, and 22.9 microns are used to evaluate proposed model atmospheres from the literature. The present observations demonstrate that the equatorial thermal structure has not changed measurably in the last three years.

Caldwell, J.↗

Thunderstorm-environment interactions determined with three-dimensional trajectories

Diagnostically determined three dimensional trajectories were used to reveal some of the scale interaction processes that occur between convective storms and their environment. Data from NASA's fourth Atmospheric Variability Experiment are analyzed. Two intense squall lines and numerous reports of severe weather occurred during the period. Convective storm systems with good temporal and spatial continuity are shown to be related to the development and movement of short wave circulation systems aloft that propagate eastward within a zonal mid tropospheric wind pattern. These short wave systems are found to produce the potential instability and dynamic triggering needed for thunderstorm formation. The environmental flow patterns, relative to convective storm systems, are shown to produce large upward air parcel movements in excess of 50 mb/3h in the immediate vicinity of the storms. The air undergoing strong lifting originates as potentially unstable low level air traveling into the storm environment from southern and southwestern directions. The thermo and hydrodynamical processes that lead to changes in atmospheric structure before, during, and after convective storm formation are described using total time derivatives of pressure or net vertical displacement, potential temperature, and vector wind calculated by following air parcels.

Wilson, G. S.↗

Analytical study of interior noise control by fuselage design techniques on high-speed, propeller-driven aircraft

The acoustical treatment mass penalties required to achieve an interior noise level of 80 dBA for high speed, fuel efficient propfan-powered aircraft are determined. The prediction method used is based on theory developed for the outer shell dynamics, and a modified approach for add-on noise control element performance. The present synthesis of these methods is supported by experimental data. Three different sized aircraft are studied, including a widebody, a narrowbody and a business sized aircraft. Noise control penalties are calculated for each aircraft for two kinds of noise control designs: add-on designs, where the outer wall structure cannot be changed, and advanced designs where the outer wall stiffness level and the materials usage can be altered. For the add-on designs, the mass penalties range from 1.7 to 2.4 percent of the takeoff gross weight (TOGW) of the various aircraft, similar to preliminary estimates. Results for advanced designs show significant reductions of the mass penalties. For the advanced aluminum designs the penalties are 1.5% of TOGW, and for an all composite aircraft the penalties range from 0.74 to 1.4% of TOGW.

Revell, J. D.↗

Broadband jet noise amplification by a pure tone excitation

A model is proposed for the change in turbulent structure of a round jet in the presence of an acoustic excitation. The excitation is initial amplitude at the jet exit. As these waves propagate downstream they extract energy from the mean flow and transfer it to the random turbulence. This results in an increase in the levels of the turbulence and a resulting increase in the radiated broadband noise. An examination is made of the effect of excitation level and frequency on the jet flow. The numerical procedure allows for radial as well as axial variations in the averaged properties of jet to be calculated. The results indicate that the presence of a finite amplitude instability wave increases the spreading of the jet.

Morris, P. J.↗

A model for broadband jet noise amplification

A model is proposed for the change in turbulent structure of a round jet in the presence of an acoustic excitation. The excitation is assumed to trigger instability waves of a known initial amplitude at the jet exit. As these waves propagate downstream they extract energy from the mean flow and transfer it to the random turbulence. This results in an increase in the levels of the turbulence and a resulting increase in the radiated broadband noise. No calculations are presented for the noise radiation; however, an examination is made of the effect of excitation level and frequency on the jet flow. The numerical procedure allows for radial as well as axial variations in the averaged properties of jet to be calculated. The results indicate that the presence of a finite amplitude instability wave increases the spreading of the jet. It does not vary the characteristic radial shapes of both the axial mean velocity and the turbulent kinetic energy. An energy budget for the random turbulence shows that it is fed energy from the excited wave predominantly on each side of the jet lip line. This results in a broader radial shape for the turbulent kinetic energy.

Morris, P. J.↗

Surface penetrators for planetary exploration: Science rationale and development program

Work on penetrators for planetary exploration is summarized. In particular, potential missions, including those to Mars, Mercury, the Galilean satellites, comets, and asteroids are described. A baseline penetrator design for the Mars mission is included, as well as potential instruments and their status in development. Penetration tests in soft soil and basalt to study material eroded from the penetrator; changes in the structure, composition, and physical properties of the impacted soil; seismic coupling; and penetrator deflection caused by impacting rocks, are described. Results of subsystem studies and tests are given for design of entry decelerators, high-g components, thermal control, data acquisition, and umbilical cable deployment.

Murphy, J. P.↗

Absorbers seen near the Venus cloud tops from Pioneer Venus

Pioneer Venus Orbiter measurements of planetary contrast at the Venus cloud tops are discussed. Images of the cloud tops at wavelengths between 1990 and 3400 A were obtained by the Pioneer UV Spectrometer together with broadband imagery and polarimetry at 2700 and 3650 A from the Orbiter Cloud Photopolarimeter at Venus phase angles of 33 to 130 deg. The planet is found to be darkest at the point where the UV Spectrometer line of sight penetrates perpendicular to the cloud tops, indicating that the absorbing material must be deep in the atmosphere. The contrast observed at wavelengths shortward of 3200 A is explained by SO2 absorption in the dark regions, while the persistence of the contrast at longer wavelengths requires the presence of an additional absorber or absorbers closely associated with the SO2, and a haze of submicron particles overlying the cloud tops in the bright regions. The correlations found between contrast and polarization indicate that no single constituent or change in vertical structure can account for the UV contrast. The origin of the markings is instead explained by a model in which absorbers subject to photochemical destruction are mixed upward into the cloud top region.

Esposito, L. W.↗