Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

Magnetic reconnection in 3D fusion devices: non-linear reduced equations and linear current-driven instabilities

Abstract Magnetic reconnection in 3D fusion devices is investigated. With the use of Boozer co-ordinates, we reduce the non-linear resistive magnetohydrodynamic equations in the limit of large aspect ratio and finite pressure fluctuations, to obtain a set of non-linear equations suitable for magnetic reconnection studies in stellarators. Magnetic flux unfreezing due to a finite electron mass is also considered. Equations that govern the linear regime and some of their general properties are given. We emphasise the role of magnetic geometry and identify how some aspects of stellarator optimisation could have an impact on reconnecting instabilities, in particular by exacerbating those enabled by electron inertia. The effect of 3D coupling on the linear reconnection rates and the mode structure is quantitatively addressed in the case in which the equilibrium rotational transform has one specific resonant location for which one mode can reconnect while coupled to an arbitrary number of non-resonant harmonics. The full problem is rigorously reduced to an equivalent cylindrical one, by introducing some geometrically modified plasma inertial and dissipative scales. The 3D scalings for the growth rates of reconnection instabilities and their destabilisation criteria are given.

Physics↗

Neutrino event selection in the MicroBooNE liquid argon time projection chamber using Wire-Cell 3D imaging, clustering, and charge-light matching

An accurate and efficient event reconstruction is required to realize the full scientific capability of liquid argon time projection chambers (LArTPCs). The current and future neutrino experiments that rely on massive LArTPCs create a need for new ideas and reconstruction approaches. Wire-Cell, proposed in recent years, is a novel tomographic event reconstruction method for LArTPCs. The Wire-Cell 3D imaging approach capitalizes on charge, sparsity, time, and geometry information to reconstruct a topology-agnostic 3D image of the ionization electrons prior to pattern recognition. A second novel method, the many-to-many charge-light matching, then pairs the TPC charge activity to the detected scintillation light signal, thus enabling a powerful rejection of cosmic-ray muons in the MicroBooNE detector. A robust processing of the scintillation light signal and an appropriate clustering of the reconstructed 3D image are fundamental to this technique. In this paper, we describe the principles and algorithms of these techniques and their successful application in the MicroBooNE experiment. A quantitative evaluation of the performance of these techniques is presented. Using these techniques, a 95% efficient pre-selection of neutrino charged-current events is achieved with a 30-fold reduction of non-beam-coincident cosmic-ray muons, and about 80% of the selected neutrino charged-current events are reconstructed with at least 70% completeness and 80% purity.

3D imaging↗

Ultrafast Carrier–Lattice Interactions and Interlayer Modulations of Bi 2 Se 3 by X-ray Free-Electron Laser Diffraction

We report as a 3D topological insulator, bismuth selenide (Bi 2 Se 3 ) has potential applications for electrically and optically controllable magnetic and optoelectronic devices. Understanding the coupling with its topological phase requires studying the interactions of carriers with the lattice on time scales down to the sub-picosecond regime. Here we investigate the ultrafast carrier-induced lattice contractions and interlayer modulations in Bi 2 Se 3 thin films by time-resolved diffraction using an X-ray free-electron laser. The lattice contraction depends on the carrier concentration and is followed by an interlayer expansion accompanied by oscillations. Using density functional theory (DFT) and the Lifshitz model, the initial contraction can be explained by van der Waals force modulation of the confined free carrier layers. Our theory suggests that band inversion, related to a topological phase transition, is modulated by the expansion of the interlayer distance. These results provide insights into the topological phase control by light-induced structural change on ultrafast timescales.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Multiphoton Double Ionization of Ar and Ne Close to Threshold

In kinematically complete studies we explore double ionization (DI) of Ne and Ar in the threshold regime (I>3x10{sup 13} W/cm{sup 2}) for 800 nm, 45 fs pulses. The basic differences are found in the two-electron momentum distributions - 'correlation' (CO) for Ne and 'anticorrelation' (ACO) for Ar - that can be partially explained theoretically within a 3D classical model including tunneling. Transverse electron momentum spectra provide insight into 'Coulomb focusing' and point to correlated nonclassical dynamics. Finally, DI threshold intensities, CO as well as ACO regimes are predicted for both targets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Organic Semiconductor Organized into 3D DNA Arrays by “Bottom‐up” Rational Design

Abstract A 3D array of organic semiconductors was assembled using a DNA scaffold. An octameric aniline molecule (“octaniline”) was incorporated into a DNA building block based on a dimeric tensegrity triangle. The construct self‐assembled to form a 3D crystal. Reversible redox conversion between the pernigraniline and leucoemeraldine states of the octaniline is retained in the crystal. Protonic doping gave emeraldine salt at pH 5, corresponding to the conductive form of polyaniline. Redox cycling within the crystal was visualized by color changes and Raman microscopy. The ease of conversion between the octaniline states suggests that it is a viable electronic switch within a unique 3D structure.

Wang, Xiao↗

An Organic Semiconductor Organized into 3D DNA Arrays by “Bottom-up” Rational Design

Here, a 3D array of organic semiconductors was assembled using a DNA scaffold. An octameric aniline molecule (“octaniline”) was incorporated into a DNA building block based on a dimeric tensegrity triangle. The construct self-assembled to form a 3D crystal. Reversible redox conversion between the pernigraniline and leucoemeraldine states of the octaniline is retained in the crystal. Protonic doping gave emeraldine salt at pH 5, corresponding to the conductive form of polyaniline. Redox cycling within the crystal was visualized by color changes and Raman microscopy. The ease of conversion between the octaniline states suggests that it is a viable electronic switch within a unique 3D structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic Near-Degeneracy For Photoemission: Generality of 4f Excitations

In a previous study of the 3s X-ray photoelectron spectra, XPS, of Mn, we identified a new intra-atomic many-body effect that lead to an ~50% increase in the predicted exchange splitting of the main high spin and low spin XPS peaks. The new many-body effect involved the promotion of one electron from the M shell, 3s, 3p, and 3d, into a 4f orbital and a redistribution of the remaining electrons over the M shell orbitals; of particular importance were frustrated Auger configurations. FAC’s where the 3s shell was filled. In the present work, we demonstrate the general importance of these 4f FAC’s by showing that they are of comparable importance for increasing the 3s exchange splitting in Ni as they were in Mn.

36 MATERIALS SCIENCE↗

Ab initio investigation of Br-3d core-excited states in HBr and HBr + toward XUV probing of photochemical dynamics

Ultrafast X-ray/XUV transient absorption spectroscopy is a powerful tool for real-time probing of chemical dynamics. Interpretation of the transient absorption spectra requires knowledge of core-excited potentials, which necessitates assistance from high-level electronic-structure computations. In this study, we investigate Br-3d core-excited electronic structures of hydrogen bromide (HBr) using spin-orbit general multiconfigurational quasidegenerate perturbation theory (SO-GMC-QDPT). Potential energy curves and transition dipole moments are calculated from the Franck-Condon region to the asymptotic limit and used to construct core-to-valence absorption strengths for five electronic states of HBr ( 1 Σ 0 +, 3 Π 1 , 1 Π 1 , 3 Π 0 +, 3 Σ 1 ) and two electronic states of HBr+ ( 2 Π 3/2 , 2 Σ 1/2 ). The results illustrate the capabilities of Br-3d edge probing to capture transitions of the electronic-state symmetry as well as nonadiabatic dissociation processes that evolve across avoided crossings. Furthermore, core-to-valence absorption spectra are simulated from the neutral 1 Σ 0 + state and the ionic 2 Π 1/2,3/2 states by numerically solving the time-dependent Schrödinger equation and exhibit excellent agreement with the experimental spectrum. The comprehensive and quantitative picture of the core-excited states obtained in this work allows for transparent analysis of the core-to-valence absorption signals, filling gaps in the theoretical understanding of the Br-3d transient absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

3D-Printed Porous Supramolecular Sorbents for Cobalt Recycling

Electronic waste recycling is a recognized global challenge that requires new strategies to bind and release critical materials selectively, such as cobalt present in lithium-ion batteries. To address this challenge, hierarchical 3D-printed porous polymer scaffolds bearing supramolecular receptors were prepared using vat photopolymerization and their cobalt binding profiles were examined as a function of matrix polarity. By combining high-resolution digital light processing (DLP) with polymerization-induced phase separation (PIPS), functional acrylic copolymer networks with micrometer-level precision of geometry and nanometer-level pores were generated. Covalent integration of a methacrylate-functionalized bisdicyclohexyl acetamide (BDCA-MA) receptor enabled binding and release of cobalt(II) chloride (CoCl 2 ) via a solvent polarity switch mechanism involving a change in solvent from ethanol to water. The present structures proved reusable as shown by sustained high binding efficiency over five bind and release cycles. Finally, this platform represents a “green” and energy conscious method for future electronic waste recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy

In this study, a noncommercial 3D printing machine was used to fabricate Ti-6Al-4V alloy by electron-beam melting (EBM). The influence of beam current on the microstructure, phase composition and mechanical properties of electron-beam-melted Ti-6Al-4V alloy was investigated. Numerical simulation is implemented to evaluate thermal fields during electron-beam melting of Ti-6Al-4V powder. The decrease in beam current from 3.5 to 2.5 mA leads to refinement of microstructure: The average width of α plates decreases from 10 down to 6 μm. The formation of finer microstructure is attributed to higher cooling rate at lower beam current confirmed by simulation. The phase composition of EBM Ti-6Al-4V indirectly depends on the beam current. High content of β phase (7%) was achieved at the beam current of 3 mA. The produced Ti-6Al-4V samples are characterized by high microhardness (470-520 HV).

36 MATERIALS SCIENCE↗

Experimental determination of electron attenuation lengths in complex materials by means of epitaxial film growth: advantages and challenges

Accurate electron attenuation lengths are of critical importance in using electron spectroscopic methods to quantitatively characterize complex materials. Here we show that analysis of core-level and valence-band x-ray photoelectron spectra excited with monochromatic AlK? x-rays from the substrate and measured as a function of film thickness can be used to determine electron attenuation lengths in epitaxial SrTiO3 films on Ge(001). Closely lattice-matched epitaxial heterojunctions are ideal systems for determining attenuation lengths provided the films grow in a layer-by-layer fashion, leading to atomically flat surfaces, and the buried interfaces are atomically abrupt. In principle, either the rate of attenuation of substrate peak intensities or the rate of increase of film peak intensities can be used for this purpose. However, we find that structural nonuniformities in the films reduce the accuracy of electron attenuation lengths determined from photoelectrons that originate within the films. A more reliable source of information is found in photoelectrons from the substrate which traverse the film. By using the energy dependence of calculated electron attenuation lengths from the NIST database in combination with Ge 3d core and Ge-derived valence band intensities, we determine electron attenuation length as a function of kinetic energy for SrTiO3.

Chambers, Scott A.↗

Atomic-scale 3D structural dynamics and functional degradation of Pt alloy nanocatalysts during the oxygen reduction reaction

Pt-based electrocatalysts are the primary choice for fuel cells due to their superior oxygen reduction reaction (ORR) activity. To enhance ORR performance and durability, extensive studies have investigated transition metal alloying, doping, and shape control to optimize the three key governing factors for ORR: geometry, local chemistry, and strain of their surface and subsurface. However, systematic optimization remains incomplete, as it requires an atomic-scale understanding of these factors and their dynamics over potential cycling, as well as their relationship to ORR activity. Here, we implement neural network-assisted atomic electron tomography to measure the 3D atomic structural dynamics and their effects on the functional degradation of PtNi alloy catalysts. Our results reveal that PtNi catalysts undergo shape changes, surface alloying, and strain relaxation during cycling, which can be effectively mitigated by Ga doping. By combining geometry, local chemistry, and strain analysis, we calculated the changes in ORR activity over thousands of cycles and observed that Ga doping leads to higher initial activity and greater stability. These findings offer a pathway to understanding 3D atomic structural dynamics and their relation to ORR activity during cycling, paving the way for the systematic design of durable, high-efficiency nanocatalysts.

Jeong, Chaehwa↗

Selected Area Deposition of PtC x Nanostructures: Implications for Functional Coatings of 3D Nanoarchitectures

Here, we report that selected area deposition of 3D nanostructures is induced via a pyrolytic laser chemical vapor deposition (CVD) process where selected area heating results from the unique photothermal transport regime that is intrinsic to 3D nanostructures. PtC x composite nanostructures were deposited by focused electron beam-induced deposition (FEBID) and used as 3D templates. Subsequent simultaneous localized delivery of an organometallic PtC x precursor and pulsed 915 nm laser irradiation to the pre-defined nanostructures results in selected area deposition on the FEBID features. Results indicate the ability to initiate the process on sub-diffraction-limit nanoscale features. To elucidate the mechanisms that are operative in the selected area deposition, we analyze the effects of the laser repetition rate, power, and pulse duration. Thermal simulations corroborate that the pseudo-1D thermal transport of the nanostructure geometry coupled with the optical and thermal properties of the nanostructure governs the CVD reaction. The results demonstrated here suggest that controlling the thermal transport in nanomaterial architectures could be a useful means to spatially control localized photothermally stimulated chemical reactions and induce selected area reactions.

36 MATERIALS SCIENCE↗

A HIGH-RESOLUTION PHOTOIONIZATION AND PHOTOELECTRON STUDY OF {sup 58}Ni USING A VACUUM ULTRAVIOLET LASER

In order to provide high-resolution spectroscopic data of nickel ({sup 58}Ni) and its cation ({sup 58}Ni{sup +}) for the assignment of vacuum ultraviolet (VUV) stellar spectra, we have obtained the photoionization efficiency (PIE) spectra of {sup 58}Ni by using a supersonically cooled laser ablation transition-metal beam source and a broadly tunable VUV laser in the range of 61,100-73,600 cm{sup -1}, covering the photoionization transitions: Ni{sup +} (3d{sup 92} D) <- Ni (3d{sup 8}4s{sup 23} D), Ni{sup +}(3d{sup 92} D) <- Ni(3d{sup 8}4s{sup 23} F), and Ni{sup +} (3d{sup 8}4s{sup 4} F) <- Ni(3d{sup 8}4s{sup 23} F). We have also measured the VUV laser pulsed-field-ionization-photoelectron (PFI-PE) spectra of {sup 58}Ni in these regions. The VUV-PFI-PE measurement has allowed the determination of a precise value of 61,619.89 {+-} 0.8 cm{sup -1} (7.6399 {+-} 0.0001 eV) for the ionization energy (IE) of {sup 58}Ni. Due to the narrow VUV laser optical bandwidth of 0.4 cm{sup -1} used in the present study, many complex autoionizing resonances exhibiting Fano line shape profiles are resolved in the PIE spectra. Four autoionizing Rydberg series originating from two-electron and one-electron excitations from the Ni(3d{sup 8}4s{sup 23} F{sub 4}) ground state to converge to the respective Ni{sup +}({sup 2} D{sub 3/2}) and Ni{sup +}({sup 4} F{sub J} ) (J = 9/2, 7/2, and 5/2) ion states are identified. The Rydberg analysis, along with VUV-PFI-PE measurements, has yielded highly precise IE values for the formation of these excited ionic states from the Ni(3d{sup 8}4s{sup 23} F{sub 4}) ground state. The IE values, relative photoionization cross sections, and autoionizing Rydberg resonances observed in the present study are relevant to astrophysics by enhancing the atomic database of iron group transition metal atoms and for understanding the Ni and Ni{sup +} contribution to the VUV opacity in the solar atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Dark-field x-ray microscopy for 2D and 3D imaging of microstructural dynamics at the European x-ray free-electron laser

Dark field x-ray microscopy (DXFM) can visualize microstructural distortions in bulk crystals. Using the femtosecond x-ray pulses generated by x-ray free-electron lasers (XFELs), DFXM can achieve sub-μm spatial resolution and <100 fs time resolution simultaneously. In this paper, we demonstrate ultrafast DFXM measurements at the European XFEL to visualize an optically driven longitudinal strain wave propagating through a diamond single crystal. We also present two DFXM scanning modalities that are new to the XFEL sources: spatial 3D and 2D axial-strain scans with sub-μm spatial resolution. With this progress in XFEL-based DFXM, we discuss new opportunities to study multi-timescale spatiotemporal dynamics of microstructures.

47 OTHER INSTRUMENTATION↗

The linac coherent light source single particle imaging road map

Intense femtosecond x-ray pulses from free-electron laser sources allow the imaging of individual particles in a single shot. Early experiments at the Linac Coherent Light Source (LCLS) have led to rapid progress in the field and, so far, coherent diffractive images have been recorded from biological specimens, aerosols, and quantum systems with a few-tens-of-nanometers resolution. In March 2014, LCLS held a workshop to discuss the scientific and technical challenges for reaching the ultimate goal of atomic resolution with single-shot coherent diffractive imaging. This paper summarizes the workshop findings and presents the roadmap toward reaching atomic resolution, 3D imaging at free-electron laser sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intrinsic Limits of Charge Carrier Mobilities in Layered Halide Perovskites

Layered halide perovskites have emerged as potential alternatives to three-dimensional (3D) halide perovskites due to their improved stability and larger material phase space, allowing fine tuning of structural, electronic, and optical properties. However, their charge carrier mobilities are significantly smaller than those of 3D halide perovskites, which has a considerable impact on their application in optoelectronic devices. Here, we employ state-of-the-art approaches to unveil the electron-phonon mechanisms responsible for the diminished transport properties of layered halide perovskites. Starting from a prototypical A M X 3 halide perovskite, we model the case of n = 1 and n = 2 layered structures and compare their electronic and transport properties to the 3D reference. The electronic and phononic properties are investigated within density functional theory (DFT) and density functional perturbation theory (DFPT), while transport properties are obtained via the Boltzmann transport equation. The vibrational modes contributing to charge carrier scattering are investigated and associated with polar-phonon scattering mechanisms arising from the long-range Fröhlich coupling and deformation-potential scattering processes. Our investigation reveals that the lower mobilities in layered systems primarily originate from the increased electronic density of states at the vicinity of the band edges, while the electron-phonon coupling strength remains similar. Such an increase is caused by the dimensionality reduction and the break in octahedra connectivity along the stacking direction. Our findings provide a fundamental understanding of the electron-phonon coupling mechanisms in layered perovskites and highlight the intrinsic limitations of the charge carrier transport in these materials. Published by the American Physical Society 2024

Cucco, Bruno (ORCID:0000000331564143)↗

X-ray photoemission analysis of chemically modified TlBr surfaces for improved radiation detectors

We subjected device-grade TlBr to various chemical treatments used in room temperature radiation detector fabrication to determine the resulting surface composition and electronic structure. As-polished TlBr was treated separately with HCl, SOCl 2 , Br:MeOH and HF solutions. High-resolution photoemission measurements on the valence band electronic structure and Tl 4f, Br 3d, Cl 2p and S 2p core lines were used to evaluate surface chemistry and shallow heterojunction formation. Surface chemistry and valence band electronic structure were correlated with the goal of optimizing the long-term stability and radiation response.

36 MATERIALS SCIENCE↗