Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONJUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42

In-situ Synthesis of PuCl 3 and Corresponding Raman and Density Functional Theory Vibrational Modes

The experimental and calculated Raman spectrum of PuCl 3 has been reported for the first time. PuCl 3 is a primary species found in plutonium metal refinement, specifically in pyrochemical salt processes including multicycle direct oxide reduction, metal chlorination, and electrorefining. As such, Raman signatures of PuCl 3 could serve as potential forensic indicators of material process history. A novel technique for synthesizing PuCl 3 from the in situ chlorination of plutonium metal with HCl was developed to establish these signatures. Cerium metal surrogates were utilized to ensure optimization of the plutonium experiments and to minimize personnel exposure, and all experiments were carried out in a Raman reaction chamber designed for air-tight, high vacuum environments. In situ Raman spectroscopy was employed in conjunction with density functional theory (DFT) to investigate the vibrational modes of PuCl 3 . Associated mixed oxy and hydroxyl phases are also reported. The combined Raman and DFT results have eliminated inconsistencies in Raman mode assignments for the MX 3 family of metal chlorides having P6 3 /m symmetry, and IR modes derived from the DFT calculations are additionally presented. The data observed in this study are of potential interest to nuclear forensic analyses, nuclear sample aging, nuclear energy, plutonium processing, and stockpile stewardship.

36 MATERIALS SCIENCE↗

Assessment of task‐based performance from five clinical DBT systems using an anthropomorphic breast phantom

Purpose Digital breast tomosynthesis (DBT) is a limited‐angle tomographic breast imaging modality that can be used for breast cancer screening in conjunction with full‐field digital mammography (FFDM) or synthetic mammography (SM). Currently, there are five commercial DBT systems that have been approved by the U.S. FDA for breast cancer screening, all varying greatly in design and imaging protocol. Because the systems are different in technical specifications, there is a need for a quantitative approach for assessing them. In this study, the DBT systems are assessed using a novel methodology with an inkjet‐printed anthropomorphic phantom and four alternative forced choice (4AFC) study scheme. Method A breast phantom was fabricated using inkjet printing and parchment paper. The phantom contained 5‐mm spiculated masses fabricated with potassium iodide (KI)‐doped ink and microcalcifications (MCs) made with calcium hydroxyapatite. Images of the phantom were acquired on all five systems with DBT, FFDM, and SM modalities where available using beam settings under automatic exposure control. A 4AFC study was conducted to assess reader performance with each signal under each modality. Statistical analysis was performed on the data to determine proportion correct (PC), standard deviations, and levels of significance. Results For masses, overall detection was highest with DBT. The difference in PC was statistically significant between DBT and SM for most systems. A relationship was observed between increasing PC and greater gantry span. For MCs, performance was highest with DBT and FFDM compared to SM. The difference between PC of DBT and PC of SM was statistically significant for all manufacturers. Conclusions This methodology represents a novel approach for evaluating systems. This study is the first of its kind to use an inkjet‐printed anthropomorphic phantom with realistic signals to assess performance of clinical DBT imaging systems.

Ikejimba, Lynda C.↗

Size Selectivity of Sampling Gears Used to Sample Kokanee

Abstract Kokanee Oncorhynchus nerka provide valued recreational fisheries and also serve as a prey resource for economically, socially, and ecologically important fishes. As such, management of kokanee is a major focus of natural resource agencies. Kokanee are typically monitored using midwater trawls, but the interpretation of data collected using midwater trawls is difficult due to the unknown size selectivity of the gear. We sought to assess the length selectivity of midwater trawls by comparing estimates obtained from midwater trawls with estimates obtained from gill nets adjusted for size selectivity. Experimental curtain gill nets and midwater trawls were used in conjunction to sample kokanee in seven lentic systems in Idaho. The size selectivity of gill nets was estimated by accounting for the probability of encounter and the probability of retention. Estimates of size selectivity were then used to adjust the length distribution of fish sampled in gill nets. The adjusted length distribution of fish sampled in gill nets was compared with estimates obtained from midwater trawls to identify potential size selectivity of midwater trawls. A pattern of size selectivity was apparent for both sampling techniques. The average length of kokanee sampled with midwater trawls was 111 mm; whereas, kokanee sampled with gill nets had a mean length of 235 mm. Our results suggest experimental gill nets are useful for common sampling of kokanee (e.g., trend monitoring) because the gear is less size selective than midwater trawls and is adjustable for size selectivity. However, midwater trawls are likely the best gear for addressing questions associated with early life history. Overall, our results provide a better understanding of gill-net and midwater trawl selectivity and ultimately improve the ability to sample and manage the species.

Klein, Zachary B.↗

Spatial and temporal overlap between hatchery- and natural-origin steelhead and Chinook Salmon during spawning in the Klickitat River, Washington, USA

Abstract Objective A goal of many segregated salmonid hatchery programs is to minimize potential interbreeding between hatchery- and natural-origin fish. Our objective was to assess this on the Klickitat River, Washington, USA. Methods We used radiotelemetry to evaluate spatiotemporal spawning overlap between hatchery- and natural-origin steelhead Oncorhynchus mykiss and spring Chinook Salmon O. tshawytscha. We estimated percentages of tagged fish that spawned naturally in the Klickitat River subbasin, emigrated from the Klickitat River, or died before spawning. A kernel density analysis was used to estimate probability of spatiotemporal overlap between hatchery- and natural-origin spawners. Result For steelhead, 12% of hatchery-origin and 50% of natural-origin fish spawned naturally. For spring Chinook Salmon, 18% of hatchery-origin and 44% of natural-origin fish spawned naturally. Tag loss may result in underestimates in these percentages. Most hatchery-origin steelhead (90%) spawned downstream of river kilometer (rkm) 32, and 75% spawned from November to mid-March. The majority of natural-origin steelhead (64%) spawned upstream of rkm 32, and 75% spawned from mid-March to late May. Spawn timing of hatchery-origin Chinook Salmon (early August to mid-September) overlapped with that of natural-origin Chinook Salmon (late July to late September), and fish of both origins spawned in the same 30-km reach of the river. We estimated the percentage of hatchery-origin spawners (pHOS) on the natural spawning grounds to be 12% for steelhead and 40% for spring Chinook Salmon across all study years. For steelhead, we estimated the overlap probability to be 25% (95% CI = 22.5–28%). For spring Chinook Salmon, tight spatial clustering of hatchery-origin fish resulted in a lower overlap estimate of 21% (13–31%). Conclusion We suggest adjusting pHOS estimates using these overlap estimates or similar spatiotemporal data on actual spawner proximity and possible interactions, and that these types of analyses be used in conjunction with gene flow analysis to accurately evaluate effects of individual hatchery programs.

Zendt, Joseph S.↗

Optimal Polynomial Smoothers and One‐Sided V‐Cycles for Poisson Problems

The solution to the Poisson equation arising from the spectral element discretization of the incompressible Navier‐Stokes equations needs robust preconditioning strategies. One such strategy is multigrid. To realize the potential of multigrid methods, effective smoothing strategies are needed. Chebyshev polynomial smoothers, in conjunction with pointwise Jacobi or additive Schwarz methods (ASMs), prove to be an effective smoother. Other polynomial smoothers, however, may provide superior convergence to the multigrid preconditioner. The authors compare the standard Chebyshev polynomial smoothers to both the novel fourth‐kind Chebyshev polynomial smoothers proposed by Lottes as well as smoothers based on the polynomial of best uniform approximation to as proposed by Kraus, Vassilevski, and Zikatanov. At the cost of symmetry, further improvements may be made. For example, a order polynomial smoother on both sides of the V‐cycle may be substituted with an order polynomial smoother on one side at no additional cost. The choice of omitting the postsmoother in favor of higher‐order polynomial presmoothing is advantageous in cases where the multigrid approximation property constant is large. The authors consider a 2D model problem based on finite differences to motivate the choice of polynomial smoother, order, and whether to apply postsmoothing for the target application of high‐order ‐geometric multigrid methods for GPU architectures. Results from both domains demonstrate the substantial improvement of these approaches over the standard Chebyshev polynomial smoother with a symmetric V‐cycle.

97 MATHEMATICS AND COMPUTING↗

Error modeling for surrogates of dynamical systems using machine learning: Machine-learning-based error model for surrogates of dynamical systems

A machine learning–based framework for modeling the error introduced by surrogate models of parameterized dynamical systems is proposed. The framework entails the use of high-dimensional regression techniques (eg, random forests, and LASSO) to map a large set of inexpensively computed “error indicators” (ie, features) produced by the surrogate model at a given time instance to a prediction of the surrogate-model error in a quantity of interest (QoI). This eliminates the need for the user to hand-select a small number of informative features. The methodology requires a training set of parameter instances at which the time-dependent surrogate-model error is computed by simulating both the high-fidelity and surrogate models. Using these training data, the method first determines regression-model locality (via classification or clustering) and subsequently constructs a “local” regression model to predict the time-instantaneous error within each identified region of feature space. We consider 2 uses for the resulting error model: (1) as a correction to the surrogate-model QoI prediction at each time instance and (2) as a way to statistically model arbitrary functions of the time-dependent surrogate-model error (eg, time-integrated errors). We then apply the proposed framework to model errors in reduced-order models of nonlinear oil-water subsurface flow simulations, with time-varying well-control (bottom-hole pressure) parameters. The reduced-order models used in this work entail application of trajectory piecewise linearization in conjunction with proper orthogonal decomposition. Moreover, when the first use of the method is considered, numerical experiments demonstrate consistent improvement in accuracy in the time-instantaneous QoI prediction relative to the original surrogate model, across a large number of test cases. When the second use is considered, results show that the proposed method provides accurate statistical predictions of the time- and well-averaged errors.

97 MATHEMATICS AND COMPUTING↗

Modeling curved interfaces without element‐partitioning in the extended finite element method

Summary In this paper, we model holes and material interfaces (weak discontinuities) in two‐dimensional linear elastic continua using the extended finite element method on higher‐order (spectral) finite element meshes. Arbitrary parametric curves such as rational Bézier curves and cubic Hermite curves are adopted in conjunction with the level set method to represent curved interfaces. Efficient computation of weak form integrals with polynomial integrands is realized via the homogeneous numerical integration scheme—a method that uses Euler's homogeneous function theorem and Stokes' theorem to reduce integration to the boundary of the domain. Numerical integration on cut elements requires the evaluation of a one‐dimensional integral over a parametric curve, and hence, the need to partition curved elements is eliminated. To improve stiffness matrix conditioning, ghost penalty stabilization and the Jacobi preconditioner are used. For material interface problems, we develop an enrichment function that captures weak discontinuities on spectral meshes. Taken together, we show through numerical experiments that these advances deliver optimal algebraic rates of convergence with h ‐refinement ( p =1,2,…,5) and exponential rates of convergence with p ‐refinement ( p =1,2,…,7) for elastostatic problems with holes and material inclusions on Cartesian p th‐order spectral finite element meshes.

Chin, Eric B.↗

An adaptive granular representative volume element model with an evolutionary periodic boundary for hierarchical multiscale analysis

The hierarchical multiscale analysis normally utilizes a microscopic representative volume element (RVE) model to capture path/history-dependent macroscopic responses instead of using phenomenological constitutive models. However, for problems involving large deformation, the current RVE model used in geomechanics may lose representative properties due to the progressive distortion of the RVE box, unless a proper reinitialization is applied. This work develops an adaptive RVE model in conjunction with an evolutionary periodic boundary (EPB) algorithm for hierarchical multiscale analysis of granular materials undergoing large deformation based on a recent RVE model proposed for coupling molecular dynamics and the material point method. The proposed adaptive RVE model avoids the reinitialization of the RVE box that even undergoes extremely large shear deformation; meanwhile, it accounts for the deformation history of the RVE model and treats the interaction between boundary particles and other image particles in a more efficient way. Numerical examples with extremely large deformation are used to illustrate the adaptive granular RVE model enhanced by the proposed EPB algorithm. Furthermore, some key features of this new methodology are further discussed for clarification.

42 ENGINEERING↗

Efficient co-solution of time step size and independent state in simulations of fluid-driven fracture propagation with embedded meshes

Here we present an efficient time-continuation scheme for fluid-driven fracture propagation problems in the extended finite element method framework. The approach applies a monolithic solution strategy to a fully coupled and implicit approximation of hydro-mechanical systems in conjunction with simultaneous linear elastic propagation of multiple fractures. At the end of each time step, the process ensures that the weakest fracture tip is in an equilibrium propagation regime. Furthermore, the solution process provides an initialization procedure for the newly created fracture spaces and an a priori estimate of the stress intensity factor growth rate, improving simulation robustness, and efficiency. The solution process is validated using the Kristianovich-Geertsma-de Klerk analytical solution under the toughness- and viscosity-dominated regimes. It is also extended to and demonstrated on problems with multiple fractures undergoing simultaneous propagation with stress shadow interactions. Numerical examples demonstrate that the solution process can reduce the required computational cost by one order of magnitude compared to other existing methods.

42 ENGINEERING↗

Structure, nanomechanics, and dynamics of dispersed surfactant‐free clay nanocomposite films

The current work presents a new approach to achieve high quality dispersion of surfactant‐free nanoclay tactoid particles in sub‐micron thin films despite the absence of organic modifier. Natural Montmorillonite particles, Cloisite, were dispersed in thin films of polycaprolactone (PCL) through a flow coating technique assisted by ultra‐sonication. Wide‐angle X‐ray scattering (WAXS), grazing‐incidence wide‐angle X‐ray scattering (GI‐WAXS), and transmission electron microscopy (TEM) were used to confirm the level of natural clay dispersion down to the level of tactoids (sub‐micron scale stacks of clay sheets). These characterization techniques were carried out in conjunction with an analysis of nanomechanical properties via strain‐induced buckling instability for modulus measurements (SIEBIMM), a high‐throughput technique to characterize thin film mechanical properties. The buckling patterns indicate that the natural clay tactoids separate buckling‐enhancing (high‐modulus) crystalline regions and interconnect buckling‐suppressing amorphous (low‐modulus) regions. Due to the tactoid length scale, the glass transition behavior of the composites as characterized by broadband dielectric relaxation spectroscopy was unmodified by the clay. Likewise, the glass transition temperature, T g , and fragility (slope of relaxation time behavior approaching T g ), remain unaffected, indicating that these dispersed tactoids do not induce pronounced confinement effects on dynamics. POLYM. ENG. SCI., 58:1285–1295, 2018. © 2018 Society of Plastics Engineers

Zhang, Xiao↗

Evaluation of moisture ingress from the perimeter of photovoltaic modules: Evaluation of moisture ingress

Many thin film photovoltaic (PV) technologies can be sensitive to corrosion induced by the presence of water vapor in the packaging materials. Typically impermeable front and backsheets are used in conjunction with an edge-seal around the perimeter to prevent water vapor ingress. These edge-seal materials are often made of a polyisobutylene resin filled with desiccant, which dramatically increases the time for moisture to reach sensitive module components. While edge-seals can prevent moisture ingress, even the lowest diffusivity transparent encapsulant materials are insufficient for the lifetime of a module. To evaluate the performance of edge-seal and encapsulant materials in a manner that simulates their function in a PV module, an optical method was devised where ingress is detected by reaction of a Ca film with water. Using this method, we have exposed test samples to heat and humidity allowing quantitative comparison of different edge-seal and encapsulant materials. Next, we use measurements of polymer diffusivity and solubility to evaluate the ability to model this moisture ingress. Here, we find good agreement between these two methods highlighting the much greater ability of polyisobutylene materials to keep moisture out as compared with typical encapsulant materials used in the PV industry.

14 SOLAR ENERGY↗

Rapid thermal processing of cost-effective contacts for silicon solar cells

This paper reports on the investigation of rapid thermal processing (RTP) of contacting the Al-BSF solar cell with Ag, Cu, and Ni in conjunction with aerosol printing technique. The study showed a liftoff and delamination, respectively, for the bi and tri stack layers of Ag frit/Ni and Ag frit/Ni/Cu fired above 790 degrees C peak firing temperature. The 770 degrees C peak firing temperature gave excellent electrical performance for both bi and tri stack layer contacts, which is not favorable to forming thick back surface field (BSF) required for high open circuit voltage (VOC). This suggests that the bilayer and trilayer contacts involving Ag frit are limited to low peak firing temperature, but Ni frit, on the other hand, showed a wider firing temperature range. This is supported by low reverse saturation current density (J02) of 1.1 x 10-11 A/cm2 and high shunt resistance (RSH) of 5750 ..omega.. cm2 for the Ni frit fired at 800 degrees C peak firing temperature. More so, the adhesion of Ni Frit to silicon is better than Ag counterpart as evidenced in the SEM micrograph. Thus, by adopting RTP Ni/Cu contacts, the cost of metallization of solar cell can be dropped from 35% of total processing cost to only 5% to 6%, which is approximately 30% drop in the total cost of processing.

14 SOLAR ENERGY↗

Expression of a mammalian RNA demethylase increases flower number and floral stem branching in Arabidopsis thaliana

Abstract RNA methylation plays a central regulatory role in plant biology and is a relatively new target for plant improvement efforts. In nearly all cases, perturbation of the RNA methylation machinery results in deleterious phenotypes. However, a recent landmark paper reported that transcriptome‐wide use of the human RNA demethylase FTO substantially increased the yield of rice and potatoes. Here, we have performed the first independent replication of those results and demonstrated broader transferability of the trait, finding increased flower and fruit count in the model species Arabidopsis thaliana . We also performed RNA‐seq of our FTO‐transgenic plants, which we analyzed in conjunction with previously published datasets to detect several previously unrecognized patterns in the functional and structural classification of the upregulated and downregulated genes. From these, we present mechanistic hypotheses to explain these surprising results with the goal of spurring more widespread interest in this promising new approach to plant engineering.

59 BASIC BIOLOGICAL SCIENCES↗

Recent advances in polymeric facilitated transport membranes for carbon dioxide separation and hydrogen purification

Membrane and membrane process have been widely considered as one of the best candidates for mitigating CO 2 emissions from the combustion or utilization of fossil fuels. Various amine-containing polymers constitute an important class of membranes, where the highly selective CO 2 transport is achieved by the facilitated transport mechanism. In this review, the amine–CO 2 chemistry is discussed in conjunction with the mechanism of the reaction-mediated CO 2 transport. A wide variety of amine-containing polymers are discussed based on two synthesis motifs: (a) polyamines with amino groups covalently bound to the polymer backbone and (b) small molecule amines embedded in a polymer matrix. This review concludes with the remarks on the facilitated transport membranes for post-combustion carbon capture (CO 2 /N 2 ) and hydrogen purification (CO 2 /H 2 ).

42 ENGINEERING↗

Effect of Fluorosurfactant on Capillary Instabilities in Nanoimprinted Polymer Patterns

Surface forces play a paramount role in most aspects of Nanoimprint Lithography. In particular, subjecting nanoimprinted patterns to moderate heating allows surface tension to smooth out undesirable roughness and defects in the patterns, but this thermal reflow treatment can induce structural decay or even collapse of the patterns by capillary instability if this process is not carefully controlled. Adhesion between the mold and polymer film can also cause the imprinted structure to tear or fracture. Fluorinated surfactants (FS) are attractive for reducing mold adhesion, yet the effects of these additives on nanostructure stability during thermal reflow are not well understood. Here we present thermal stability studies of line-space grating patterns created by Thermal Embossing Nanoimprint Lithography (TENIL) on model polystyrene (PS) films with FS additives. As expected by energy considerations, FS segregates to the air interface where it seems to facilitate mold release. This also reduces the surface energy and thus reduces the driving force for pattern "slumping" (height decay). However, the beneficial effects of the surfactant are counterbalanced by the fact that the FS decreases the effective film viscosity, which accelerates nanopattern leveling. The net effect is that the pattern height decay is strongly a function of FS concentration. This enhanced film fluidity in the presence of FS also makes the pattern more susceptible to an undulatory capillary instability under thermal reflow conditions. Surface phase segregation of FS and PS is also observed in conjunction with both slumping and lateral capillary instabilities, which may be useful for producing chemically patterned surfaces.

36 MATERIALS SCIENCE↗

Topography and canopy cover influence soil organic carbon composition and distribution across a forested hillslope in the discontinuous permafrost zone

Abstract Topography and canopy cover influence ground temperature in warming permafrost landscapes, yet soil temperature heterogeneity introduced by mesotopographic slope positions, microtopographic differences in vegetation cover, and the subsequent impact of contrasting temperature conditions on soil organic carbon (SOC) dynamics are understudied. Buffering of permafrost‐affected soils against warming air temperatures in boreal forests can reflect surface soil characteristics (e.g., thickness of organic material) as well as the degree and type of canopy cover (e.g., open cover vs. closed cover). Both landscape and soil properties interact to determine meso‐ and microscale heterogeneity of ground warming. We sampled a hillslope catena transect in a discontinuous permafrost zone near Fairbanks, Alaska, to test the small‐scale (1 to 3 m) impacts of slope position and cover type on soil organic matter composition. Mineral active layer samples were collected from backslope, low backslope, and footslope positions at depths spanning 19 to 60 cm. We examined soil mineralogical composition, soil moisture, total carbon and nitrogen content, and organic mat thickness in conjunction with an assessment of SOC composition using Fourier‐transform ion cyclotron resonance mass spectrometry (FT‐ICR‐MS). Soils in the footslope position had a higher relative contribution of lignin‐like compounds, whereas backslope soils had more aliphatic and condensed aromatic compounds as determined using FT‐ICR‐MS. The effect of open versus closed tree canopy cover varied with the slope position. On the backslope, we found higher oxidation of molecules under open cover than closed cover, indicating an effect of warmer soil temperature on decomposition. Little to no effect of the canopy was observed in soils at the footslope position, which we attributed, in part, to the strong impact of soil moisture content in SOC dynamics in the water‐gathering footslope position. The thin organic mat under open cover on the backslope position may have contributed to differences in soil temperature and thus SOC oxidation under open and closed canopies. Here, the thinner organic mat did not appear to buffer the underlying soil against warm season air temperatures and thus increased SOC decomposition as indicated by the higher oxidation of SOC molecules and a lower contribution of simple molecules under open cover than the closed canopy sites. Our findings suggest that the role of canopy cover in SOC dynamics varies as a function of landscape position and soil properties, namely, organic mat thickness and soil moisture. Condition‐specific heterogeneity of SOC composition under open and closed canopy cover highlights the protective effect of canopy cover for soils on backslope positions.

54 ENVIRONMENTAL SCIENCES↗

Hydrostatic Compression Curve for Triamino-Trinitrobenzene Determined to 13.0 GPa with Powder X-Ray Diffraction

Using powder X-ray diffraction in conjunction with a diamond anvil cell (DAC), the unit cell volume of triamino-trinitrobenzene (TATB) has been measured from ambient pressure to 13 GPa. The resultant isotherm is compared with previous theoretical (Byrd and Rice and Pastine and Bernecker) and experimental (Olinger and Cady) works. While all reports are consistent to approximately 2 GPa, our measurements reveal a slightly stiffer TATB material than reported by Olinger and Cady and an intermediate compressibility compared with the isotherms predicted by the two theoretical works. Analysis of the room temperature isotherm using the semi-empirical, Murnaghan, Birch-Murnaghan, and Vinet equations of state (EOS) provided a determination of the isothermal bulk modulus (K{sub 0}) and its pressure-derivative (K{sub 0}') for TATB. From these fits to our P-V isotherm, from ambient pressure to 8 GPa, the average results for the zero-pressure bulk modulus and its pressure derivative were found to be 14.7 GPa and 10.1, respectively. For comparison to shock experiments on pressed TATB powder and its plastic-bonded formulation PBX 9502 (95% TATB, 5% Kel-F 800), the isotherm was transformed to the pseudo-velocity U{sub s}-u{sub p} plane using the Rankine-Hugoniot jump conditions. This analysis provides an extrapolated bulk sound speed, c{sub 0}=1.70 km s{sup -1}, for TATB and its agreement with a previous determination (c{sub 0}=1.43 km s{sup -1}) is discussed. Furthermore, our P-V and corresponding U{sub s}-u{sub p} curves reveal a subtle cusp at approximately 8 GPa. This cusp is discussed in relation to similar observations made for the aromatic hydrocarbons anthracene, benzene and toluene, graphite, and trinitrotoluene (TNT).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ monitoring of flow-permeable surface area of high explosive powder using small sample masses

To ensure good performance of high explosive devices over long periods of time, initiating powders need to maintain their specific surface area within allowed margins during the entire duration of deployment. A common diagnostic used in this context is the Fisher sub-sieve surface area (FSSA). Furthermore, commercial permeametry instruments measuring the FSSA requires the utilization of a sample mass equal to the crystal density of the sample material, an amount that is often one or two orders of magnitude larger than the typical masses found in standard detonator applications. Here we develop a customization of the standard device that can utilize just tens of milligram samples, and with simple calibration yield FSSA values at ac curacy levels comparable to the standard apparatus. This necessitated a newly designed sample holder, made from a material of low coefficient of thermal expansion, which is conveniently transferred between an aging chamber and a re-designed permeametry tube. This improves the fidelity of accelerated aging studies by allowing measurement on the same physical sample at various time - instants during the aging process, and by obviating the need for a potentially FSSA-altering powder re-compaction step. We used the customized apparatus to monitor the FSSA evolution of a number of undoped and homolog-doped PETN powder samples that were subjected to artificial aging for several months at elevated temperatures. These results, in conjunction with an Arrhenius-based aging model were used to assess powder-coarsening - rates under long-term storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗