Search NASA⌕ Search

SEARCH · Search NASA

Results for “Code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The design of relatively machine-independent code generators

Two complementary approaches were investigated. In the first approach software design techniques were used to design the structure of a code generator for Halmat. The major result was the development of an intermediate code form known as 7UP. The second approach viewed the problem as one in providing a tool to the code generator programmer. The major result was the development of a non-procedural, problem oriented language known as CGGL (Code Generator Generator Language).

Noonan, R. E.↗
NASA NTRS1979

Transonic airfoil codes

Computer codes for the design and analysis of transonic airfoils are considered. The design code relies on the method of complex characteristics in the hodograph plane to construct shockless airfoil. The analysis code uses artificial viscosity to calculate flows with weak shock waves at off-design conditions. Comparisons with experiments show that an excellent simulation of two dimensional wind tunnel tests is obtained. The codes have been widely adopted by the aircraft industry as a tool for the development of supercritical wing technology.

Garabedian, P. R.↗
NASA NTRS1979

Development of a Model and Computer Code to Describe Solar Grade Silicon Production Processes

Mathematical models and computer codes based on these models, which allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon were developed. The following tasks were accomplished: (1) formulation of a model for silicon vapor separation/collection from the developing turbulent flow stream within reactors of the Westinghouse (2) modification of an available general parabolic code to achieve solutions to the governing partial differential equations (boundary layer type) which describe migration of the vapor to the reactor walls, (3) a parametric study using the boundary layer code to optimize the performance characteristics of the Westinghouse reactor, (4) calculations relating to the collection efficiency of the new AeroChem reactor, and (5) final testing of the modified LAPP code for use as a method of predicting Si(1) droplet sizes in these reactors.

Srivastava, R.↗
NASA NTRS1979

Extension, validation and application of the NASCAP code

Numerous extensions were made in the NASCAP code. They fall into three categories: a greater range of definable objects, a more sophisticated computational model, and simplified code structure and usage. An important validation of NASCAP was performed using a new two dimensional computer code (TWOD). An interactive code (MATCHG) was written to compare material parameter inputs with charging results. The first major application of NASCAP was performed on the SCATHA satellite. Shadowing and charging calculation were completed. NASCAP was installed at the Air Force Geophysics Laboratory, where researchers plan to use it to interpret SCATHA data.

Katz, I.↗
NASA NTRS1979

Concurrent error detecting codes for arithmetic processors

A method of concurrent error detection for arithmetic processors is described. Low-cost residue codes with check-length l and checkbase m = 2 to the l power - 1 are described for checking arithmetic operations of addition, subtraction, multiplication, division complement, shift, and rotate. Of the three number representations, the signed-magnitude representation is preferred for residue checking. Two methods of residue generation are described: the standard method of using modulo m adders and the method of using a self-testing residue tree. A simple single-bit parity-check code is described for checking the logical operations of XOR, OR, and AND, and also the arithmetic operations of complement, shift, and rotate. For checking complement, shift, and rotate, the single-bit parity-check code is simpler to implement than the residue codes.

Lim, R. S.↗
NASA NTRS1980

Capacity, cutoff rate, and coding for a direct-detection optical channel

It is shown that Pierce's pulse position modulation scheme with 2 to the L pulse positions used on a self-noise-limited direct detection optical communication channel results in a 2 to the L-ary erasure channel that is equivalent to the parallel combination of L completely correlated binary erasure channels. The capacity of the full channel is the sum of the capacities of the component channels, but the cutoff rate of the full channel is shown to be much smaller than the sum of the cutoff rates. An interpretation of the cutoff rate is given that suggests a complexity advantage in coding separately on the component channels. It is shown that if short-constraint-length convolutional codes with Viterbi decoders are used on the component channels, then the performance and complexity compare favorably with the Reed-Solomon coding system proposed by McEliece for the full channel. The reasons for this unexpectedly fine performance by the convolutional code system are explored in detail, as are various facets of the channel structure.

Massey, J. L.↗
NASA NTRS1980

Interleaved block codes for the photon channel

It is shown that interleavel binary block codes combined with pulse position modulation give the best practical coded systems yet devised for optical communication with photon detection. Linear block codes rather than convolutional codes are considered.

Mceliece, R. J.↗
NASA NTRS1981

Investigation of aerodynamic characteristics of wings having vortex flow using different numerical codes

The aerodynamic characteristics of highly sweptback wings having separation-induced vortex flow were investigated by employing different numerical codes with a view to determining some of the capabilities and limitations of these codes. Flat wings of various configurations-strake wing models, cropped, diamond, arrow and double delta wings, were studied. Cambered and cranked planforms have also been tested. The theoretical results predicted by the codes were compared with the experimental data, wherever possible, and found to agree favorably for most of the configurations investigated. However, large cambered wings could not be successfully modeled by the codes. It appears that the final solution in the free vortex sheet method is affected by the selection of the initial solution. Accumulated span loadings estimated for delta and diamond wings were found to be unusual in comparison with attached flow results in that the slopes of these load curves near the leading edge do not tend to infinity as they do in the case of attached flow.

Reddy, C. S.↗
NASA NTRS1980

Joint map data/phase sequence estimation for trellis phase codes

A unified estimation procedure is formulated for the coherent detection of trellis phase codes, including partial response FM codes and multi-h codes. The unknown carrier phase is imbedded in the system state vector, and by simple augmentation of the decoder's state space, joint data and carrier estimation may be accomplished. The procedure is general to all trellis phase codes analyzed thus far. The effect of a static phase error on detection performance is also treated.

Wilson, S. G.↗
NASA NTRS1980

PASCO: Structural panel analysis and sizing code, capability and analytical foundations

A computer code denoted PASCO which can be used for analyzing and sizing uniaxially-stiffened composite panels is described. Buckling and vibration analyses are carried out with a linked-plate analysis computer code denoted VIPASA, which is incorporated in PASCO. Sizing is based on nonlinear mathematical programming techniques and employs a computer code denoted CONMIN, also incorporated in PASCO. Design requirements considered are initial buckling, material strength, stiffness, and vibration frequency. The capability of the PASCO computer code and the approach used in the structural analysis and sizing are described.

Stroud, W. J.↗
NASA NTRS1982

Recent applications of the transonic wing analysis computer code, TWING

An evaluation of the transonic-wing-analysis computer code TWING is given. TWING utilizes a fully implicit approximate factorization iteration scheme to solve the full potential equation in conservative form. A numerical elliptic-solver grid-generation scheme is used to generate the required finite-difference mesh. Several wing configurations were analyzed, and the limits of applicability of this code was evaluated. Comparisons of computed results were made with available experimental data. Results indicate that the code is robust, accurate (when significant viscous effects are not present), and efficient. TWING generally produces solutions an order of magnitude faster than other conservative full potential codes using successive-line overrelaxation. The present method is applicable to a wide range of isolated wing configurations including high-aspect-ratio transport wings and low-aspect-ratio, high-sweep, fighter configurations.

Subramanian, N. R.↗
NASA NTRS1981

Capacity, cutoff rate, and coding for a direct-detection optical channel

It is shown that when Pierce's pulse-position modulation scheme with 2 to the L power positions (where L is some positive integer) is used on a self-noise-limited direct-detection optical communication channel, there results a (2 to the L power)-ary erasure channel that is equivalent to the parallel combination of L completely correlated binary erasure channels. The capacity of the full channel is the sum of the capacities of the component channels, but the cutoff rate of the full channel is shown to be much smaller than the sum of the cutoff rates. An interpretation of the cutoff rate is given that suggests a complexity advantage in coding separately on the component channels. It is shown that if short-constraint length convolutional codes with Viterbi decoders are used on the component channels, then the performance and complexity compare favorably with the Reed-Solomon coding system proposed by McEliece (1979) for the full channel. The reasons for this unexpectedly fine performance by the convolutional code system are explored in detail, as are various facets of the channel structure.

Massey, J. L.↗
NASA NTRS1983

GOES satellite time code dissemination

The GOES time code system, the performance achieved to date, and some potential improvements in the future are discussed. The disseminated time code is originated from a triply redundant set of atomic standards, time code generators and related equipment maintained by NBS at NOAA's Wallops Island, VA satellite control facility. It is relayed by two GOES satellites located at 75 W and 135 W longitude on a continuous basis to users within North and South America (with overlapping coverage) and well out into the Atlantic and Pacific ocean areas. Downlink frequencies are near 468 MHz. The signals from both satellites are monitored and controlled from the NBS labs at Boulder, CO with additional monitoring input from geographically separated receivers in Washington, D.C. and Hawaii. Performance experience with the received time codes for periods ranging from several years to one day is discussed. Results are also presented for simultaneous, common-view reception by co-located receivers and by receivers separated by several thousand kilometers.

Beehler, R. E.↗
NASA NTRS1983

Hypersonic flows over biconics using a variable-effective-gamma, Parabolized-Navier-Stokes code

Hypersonic flows over straight and bent biconics are calculated for a range of freestream conditions in which the gas behind the shock is treated as either perfect or real. The Parabolized-Navier-Stokes (PNS) equations form the basis of the approximation scheme. Good comparisons with experimental data for pressures, forces and moments, heat transfer, and oil-flow patterns serve to validate the perfect-gas version of the code. Circumferential velocity vector plots further aid in the interpretation of leeside oil-flow patterns. A variable-effective-gamma (VEG) option is implemented for the real-gas calculations. Gamma, now defined as the ratio of enthalpy to internal energy, is determined from a locally valid linear relation in enthalpy and pressure at every mesh point which in turn is calculated from a benchmark equilibrium code. The VEG option is easily incorporated into a host PNS code because it uses the underlying perfect-gas structure of the code. Comparisons to experimental data for heat transfer and shock shape in high enthalpy air have been obtained using the VEG option.

Gnoffo, P. A.↗
NASA NTRS1983

Experimental studies related to the origin of the genetic code and the process of protein synthesis - A review

A survey is presented of the literature on the experimental evidence for the genetic code assignments and the chemical reactions involved in the process of protein synthesis. In view of the enormous number of theoretical models that have been advanced to explain the origin of the genetic code, attention is confined to experimental studies. Since genetic coding has significance only within the context of protein synthesis, it is believed that the problem of the origin of the code must be dealt with in terms of the origin of the process of protein synthesis. It is contended that the answers must lie in the nature of the molecules, amino acids and nucleotides, the affinities they might have for one another, and the effect that those affinities must have on the chemical reactions that are related to primitive protein synthesis. The survey establishes that for the bulk of amino acids, there is a direct and significant correlation between the hydrophobicity rank of the amino acids and the hydrophobicity rank of their anticodonic dinucleotides.

Lacey, J. C., Jr.↗
NASA NTRS1983

TAS: A Transonic Aircraft/Store flow field prediction code

A numerical procedure has been developed that has the capability to predict the transonic flow field around an aircraft with an arbitrarily located, separated store. The TAS code, the product of a joint General Dynamics/NASA ARC/AFWAL research and development program, will serve as the basis for a comprehensive predictive method for aircraft with arbitrary store loadings. This report described the numerical procedures employed to simulate the flow field around a configuration of this type. The validity of TAS code predictions is established by comparison with existing experimental data. In addition, future areas of development of the code are outlined. A brief description of code utilization is also given in the Appendix. The aircraft/store configuration is simulated using a mesh embedding approach. The computational domain is discretized by three meshes: (1) a planform-oriented wing/body fine mesh, (2) a cylindrical store mesh, and (3) a global Cartesian crude mesh. This embedded mesh scheme enables simulation of stores with fins of arbitrary angular orientation.

Thompson, D. S.↗
NASA NTRS1984

Performance Simulation for Unit-memory Convolutional Codes with Byte-oriented Viterbi Decoding Algorithm

A software package developed to simulate the performance of the byte-oriented Viterbi decoding algorithm for unit-memory (UM) codes on both 3-bit and 4-bit quantized AWGN channels is described. The simulation is shown to require negligible memory and less time than that for the RTMBEP algorith, although they both provide similar performance in terms of symbol-error probability. This makes it possible to compute the symbol-error probability of large codes and to determine the signal-to-noise ratio required to achieve a bit error rate (BER) of 0.000001 for corresponding concatenated systems. A (7, 10/48) UM code, 10-bit Reed-Solomon code combination achieves the required BER at 1.08 dB for a 3-bit quantized channel and at 0.91 dB for a 4-bit quantized channel.

Vo, Q. D.↗
NASA NTRS1984

High altitude chemically reacting gas particle mixtures. Volume 3: Computer code user's and applications manual

A users manual for the RAMP2 computer code is provided. The RAMP2 code can be used to model the dominant phenomena which affect the prediction of liquid and solid rocket nozzle and orbital plume flow fields. The general structure and operation of RAMP2 are discussed. A user input/output guide for the modified TRAN72 computer code and the RAMP2F code is given. The application and use of the BLIMPJ module are considered. Sample problems involving the space shuttle main engine and motor are included.

Smith, S. D.↗