Extensive Turnover of Compatible Solutes in Cyanobacteria Revealed by Deuterium Oxide (D 2 O) Stable Isotope Probing
Not Available
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Large interfacial resistance is a widely recognized impediment to the advancement of high-voltage, all-solid-state batteries. However, a comprehensive understanding of the fundamental cause behind the interfacial resistance between solid electrolytes and typical layered oxide cathodes has not yet been achieved. Here, we investigated the high-voltage stability of Li 3 InCl 6 and elucidated the underlying interfacial electrochemical reactions between LiCoO 2 and Li 3 InCl 6 . Further, the pairing of Li 3 InCl 6 with LiCoO 2 exhibited a superior capacity retention of 73.6% even at 5.2 V, much higher than 28.2% charged at 4.6 V in lithium-ion batteries after 70 cycles. The enhanced high-voltage stability of ASSBs is attributed to the stable interface formed between LiCoO 2 and Li 3 InCl 6 and the reinforced surface and bulk structure stability. On the other hand, the ultrahigh voltage still causes the partial decomposition of Li 3 InCl 6 and generates interfacial compounds such as InClO and cobalt and indium chlorides/oxides.
Not Available
Integrating non-enzymatic chemistry with living systems has the potential to greatly expand the types and yields of chemicals that can be sourced from renewable feedstocks. The in situ conversion of microbial metabolites to higher order products will ensure their continuous generation starting from a given cellular reaction mixture. We present here a systematic study of different organocatalysts that enable aldol condensation in biological media under physiological conditions of neutral pH, moderate temperature, and ambient pressure. The relative toxicities of each catalyst were tested against bacteria, and the catalysts were found to provide good yields of homoaldol products in bacterial cultures containing aldehydes. Lastly, we demonstrate that a biocompatible oil can be used to selectively extract the upgraded products, which enabes facile isolation and decreases the product toxicity to microbes.
Explore the source record for details and available documents.
Abstract not provided
Abstract not provided
Abstract The link between stratiform precipitation microphysics and multifrequency radar observables is thoroughly investigated by exploiting simultaneous airborne radar and in situ observations collected from two aircraft during the OLYMPEX/RADEX (Olympic Mountain Experiment/Radar Definition Experiment 2015) field campaign. Above the melting level, in situ images and triple‐frequency radar signatures both indicate the presence of moderately rimed aggregates. Various mass‐size relationships of ice particles and snow scattering databases are used to compute the radar reflectivity from the in situ particle size distribution. At Ku and Ka band, the best agreement with radar observations is found when using the self‐similar Rayleigh‐Gans approximation for moderately rimed aggregates. At W band, a direct comparison is challenging because of the non‐Rayleigh effects and of the probable attenuation due to ice aggregates and supercooled liquid water between the two aircraft. A variational method enables the retrieval of the full precipitation profile above and below the melting layer, by combining the observations from the three radars. Even with three radar frequencies, the retrieval of rain properties is challenging over land, where the integrated attenuation is not available. Otherwise, retrieved mean volume diameters and water contents of both solid and liquid precipitation are in agreement with in situ observations and indicate local changes of the degree of riming of ice aggregates, on the scale of 5 km. Finally, retrieval results are analyzed to explore the validity of using continuity constraints on the water mass flux and diameter within the melting layer in order to improve retrievals of ice properties.
Abstract not provided
Abstract Recent advances in photonic integrated circuits have enabled a new generation of programmable Mach–Zehnder meshes (MZMs) realized by using cascaded Mach–Zehnder interferometers capable of universal linear-optical transformations on N input/output optical modes. MZMs serve critical functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and other applications. However, MZM implementations reported to date rely on thermo-optic phase shifters, which limit applications due to slow response times and high power consumption. Here we introduce a large-scale MZM platform made in a 200 mm complementary metal–oxide–semiconductor foundry, which uses aluminium nitride piezo-optomechanical actuators coupled to silicon nitride waveguides, enabling low-loss propagation with phase modulation at greater than 100 MHz in the visible–near-infrared wavelengths. Moreover, the vanishingly low hold-power consumption of the piezo-actuators enables these photonic integrated circuits to operate at cryogenic temperatures, paving the way for a fully integrated device architecture for a range of quantum applications.
The detrimental influence of oxygen on the performance and reliability of V/III nitride based devices is well known. However, the influence of oxygen on the nature of the incorporation of other co-dopants, such as rare earth ions, has been largely overlooked in GaN. Here, we report the first comprehensive study of the critical role that oxygen has on Eu in GaN, as well as atomic scale observation of diffusion and local concentration of both atoms in the crystal lattice. We find that oxygen plays an integral role in the location, stability, and local defect structure around the Eu ions that were doped into the GaN host. Although the availability of oxygen is essential for these properties, it renders the material incompatible with GaN-based devices. However, the utilization of the normally occurring oxygen in GaN is promoted through structural manipulation, reducing its concentration by 2 orders of magnitude, while maintaining both the material quality and the favorable optical properties of the Eu ions. Furthermore, these findings open the way for full integration of RE dopants for optoelectronic functionalities in the existing GaN platform.
Abstract not provided
Biomass and bioproduct composition critical improvements are a priority for the nascent algae-based bioeconomy.
Advances in physical models and data science are improving predictions of polymer–solvent phase behavior and we discuss the different approaches taken today and the remaining barriers to making broadly useful predictions.
Modifying perovskite into A-site deficient electrode: oxygen vacancy enhances surface kinetics and durability, enabling superior performance and stability for protonic ceramic cells.
Conventional and advanced coatings were reviewed, and it was pointed out that the coated Ni-base superalloys decreased their creep rupture life significantly at higher temperatures, and the advanced high strength superalloy became more remarkably. Concept of diffusion barrier coating system (DBC system) and their formation process was introduced, and the results obtained for several heat-resistant alloys, stainless steel (SUS310S), Ni-Mo base alloy (Hastelloy-X), and 4{sup th} generation single crystal superalloy (TMS-138) were given. It was noted that creep-rupture life of the SUS310S and Hastelloy-X with the DBC system became longer than those of the bare alloys with or without conventional {beta}-NiAl coatings. This is due to slow creep-deformation of the Re-base alloy layer as the diffusion barrier. A novel concept based on combination of superalloys and coatings was proposed, by taking both the materials science and corrosion science into consideration.
The high mass accuracy and resolving power of Fourier transform ion cyclotron resonance mass spectrometers (FT-ICR MS) make them ideal mass detectors for mass spectrometry imaging (MSI), promising to provide unmatched molecular resolution capabilities. The intrinsic low tolerance of FT-ICR MS to RF interference, however, along with typically vertical positioning of the sample, and MSI acquisition speed requirements present numerous engineering challenges in creating robotics capable of achieving the spatial resolution to match. This work discusses a two-dimensional positioning stage designed to address these issues. The stage is capable of operating in {approx}1 x 10{sup -8} mbar vacuum. The range of motion is set to 100 mm x 100 mm to accommodate large samples, while the positioning accuracy is demonstrated to be less than 0.4 micron in both directions under vertical load over the entire range. This device was integrated into three different matrix assisted laser desorption/ionization (MALDI) FT-ICR instruments and showed no detectable RF noise. The ''oversampling'' MALDI-MSI experiments, under which the sample is completely ablated at each position, followed by the target movement of the distance smaller than the laser beam, conducted on the custom-built 7T FT-ICR MS demonstrate the stability and positional accuracy of the stage robotics which delivers high spatial resolution mass spectral images at a fraction of the laser spot diameter.